#
de6cc651 |
|
27-May-2019 |
Thomas Gleixner <tglx@linutronix.de> |
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 153 Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 675 mass ave cambridge ma 02139 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 77 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Armijn Hemel <armijn@tjaldur.nl> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.837555891@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
#
a0828cf5 |
|
19-Jan-2017 |
Markus Elfring <elfring@users.sourceforge.net> |
powerpc: Use sizeof(*foo) rather than sizeof(struct foo) It's slightly less error prone to use sizeof(*foo) rather than specifying the type. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> [mpe: Consolidate into one patch, rewrite change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
#
f444f1f8 |
|
07-Aug-2015 |
Michael Ellerman <mpe@ellerman.id.au> |
powerpc/cell: Drop support for 64K local store on 4K kernels Back in the olden days we added support for using 64K pages to map the SPU (Synergistic Processing Unit) local store on Cell, when the main kernel was using 4K pages. This was useful at the time because distros were using 4K pages, but using 64K pages on the SPUs could reduce TLB pressure there. However these days the number of Cell users is approaching zero, and supporting this option adds unpleasant complexity to the memory management code. So drop the option, CONFIG_SPU_FS_64K_LS, and all related code. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Acked-by: Jeremy Kerr <jk@ozlabs.org>
|
#
25985edc |
|
30-Mar-2011 |
Lucas De Marchi <lucas.demarchi@profusion.mobi> |
Fix common misspellings Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
|
#
467d93a7 |
|
30-Oct-2010 |
Jesper Juhl <jj@chaosbits.net> |
powerpc/cell: Use vzalloc rather than vmalloc and memset in spu_alloc_lscsa_std Hi, We can get rid of a memset in arch/powerpc/platforms/cell/spufs/lscsa_alloc.c::spu_alloc_lscsa_std() by using vzalloc() rather than vmalloc()+memset(). Completely untested patch below since I have no hardware nor tools to compile this. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
|
#
5a0e3ad6 |
|
24-Mar-2010 |
Tejun Heo <tj@kernel.org> |
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
|
#
7cd58e43 |
|
20-Dec-2007 |
Jeremy Kerr <jk@ozlabs.org> |
[POWERPC] spufs: move fault, lscsa_alloc and switch code to spufs module Currently, part of the spufs code (switch.o, lscsa_alloc.o and fault.o) is compiled directly into the kernel. This change moves these components of spufs into the kernel. The lscsa and switch objects are fairly straightforward to move in. For the fault.o module, we split the fault-handling code into two parts: a/p/p/c/spu_fault.c and a/p/p/c/spufs/fault.c. The former is for the in-kernel spu_handle_mm_fault function, and we move the rest of the fault-handling code into spufs. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
|
#
f6eb7d7f |
|
04-Dec-2007 |
Jeremy Kerr <jk@ozlabs.org> |
[POWERPC] cell: add spu_64k_pages_available() check Add a function spu_64k_pages_available(), so that we can abstract the explicity use of mmu_psize_defs() in lssca_alloc.c Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
#
f1fa74f4 |
|
08-May-2007 |
Benjamin Herrenschmidt <benh@kernel.crashing.org> |
[POWERPC] Spufs support for 64K LS mappings on 4K kernels This adds an option to spufs when the kernel is configured for 4K page to give it the ability to use 64K pages for SPE local store mappings. Currently, we are optimistic and try order 4 allocations when creating contexts. If that fails, the code will fallback to 4K automatically. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
|