#
78cb0945 |
|
15-Mar-2024 |
Christophe Leroy <christophe.leroy@csgroup.eu> |
powerpc: Handle error in mark_rodata_ro() and mark_initmem_nx() mark_rodata_ro() and mark_initmem_nx() use functions that can fail like set_memory_nx() and set_memory_ro(), leading to a not protected kernel. In case of failure, panic. Link: https://github.com/KSPP/linux/issues/7 Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/b16329611deb89e1af505d43f0e2a91310584d26.1710587887.git.christophe.leroy@csgroup.eu
|
#
3c8016e6 |
|
16-Feb-2024 |
Christophe Leroy <christophe.leroy@csgroup.eu> |
powerpc: Refactor __kernel_map_pages() __kernel_map_pages() is almost identical for PPC32 and RADIX. Refactor it. On PPC32 it is not needed for KFENCE, but to keep it simple just make it similar to PPC64. Move the prototype of hash__kernel_map_pages() into mmu_decl.h to allow IS_ENABLED() to work on 32-bit. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/3656d47c53bff577739dac536dbae31fff52f6d8.1708078640.git.christophe.leroy@csgroup.eu
|
#
a5e8131a |
|
30-Jan-2024 |
Christophe Leroy <christophe.leroy@csgroup.eu> |
arm64, powerpc, riscv, s390, x86: ptdump: refactor CONFIG_DEBUG_WX All architectures using the core ptdump functionality also implement CONFIG_DEBUG_WX, and they all do it more or less the same way, with a function called debug_checkwx() that is called by mark_rodata_ro(), which is a substitute to ptdump_check_wx() when CONFIG_DEBUG_WX is set and a no-op otherwise. Refactor by centrally defining debug_checkwx() in linux/ptdump.h and call debug_checkwx() immediately after calling mark_rodata_ro() instead of calling it at the end of every mark_rodata_ro(). On x86_32, mark_rodata_ro() first checks __supported_pte_mask has _PAGE_NX before calling debug_checkwx(). Now the check is inside the callee ptdump_walk_pgd_level_checkwx(). On powerpc_64, mark_rodata_ro() bails out early before calling ptdump_check_wx() when the MMU doesn't have KERNEL_RO feature. The check is now also done in ptdump_check_wx() as it is called outside mark_rodata_ro(). Link: https://lkml.kernel.org/r/a59b102d7964261d31ead0316a9f18628e4e7a8e.1706610398.git.christophe.leroy@csgroup.eu Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: "Aneesh Kumar K.V (IBM)" <aneesh.kumar@kernel.org> Cc: Borislav Petkov (AMD) <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Greg KH <greg@kroah.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Phong Tran <tranmanphong@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Steven Price <steven.price@arm.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
#
7082f8e7 |
|
15-Sep-2022 |
Nicholas Piggin <npiggin@gmail.com> |
powerpc: move __end_rodata to cover arch read-only sections powerpc has a number of read-only sections and tables that are put after RO_DATA(). Move the __end_rodata symbol to cover these as well. Setting memory to read-only at boot is done using __init_begin, change that to use __end_rodata. This makes is_kernel_rodata() exactly cover the read-only region, as well as other things using __end_rodata (e.g., kernel/dma/debug.c). Boot dmesg also prints the rodata size more accurately. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220916040755.2398112-2-npiggin@gmail.com
|
#
980bbf7c |
|
13-Jun-2022 |
Christophe Leroy <christophe.leroy@csgroup.eu> |
powerpc/32: Call mmu_mark_initmem_nx() regardless of data block mapping. mark_initmem_nx() calls either mmu_mark_initmem_nx() or set_memory_attr() based on return from v_block_mapped() of _sinittext. But we can now handle text and data independently, so that text may be mapped by block even when data is mapped by pages. On the 8xx for instance, at startup 32Mbytes of memory are pinned in TLB. So the pinned entries need to go away for sinittext. In next patch a BAT will be set to also covers sinittext on book3s/32. So it will also be needed to call mmu_mark_initmem_nx() even when data above sinittext is not mapped with BATs. As this is highly dependent on the platform, call mmu_mark_initmem_nx() regardless of data block mapping. Then the platform will know what to do. Modify 8xx mmu_mark_initmem_nx() so that inittext mapping is modified only when pagealloc debug and kfence are not active, otherwise inittext is mapped with standard pages. And don't do anything on kernel text which is already mapped with PAGE_KERNEL_TEXT. Fixes: da1adea07576 ("powerpc/8xx: Allow STRICT_KERNEL_RwX with pinned TLB") Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/db3fc14f3bfa6215b0786ef58a6e2bc1e1f964d7.1655202804.git.christophe.leroy@csgroup.eu
|
#
0670010f |
|
17-Jan-2022 |
Christophe Leroy <christophe.leroy@csgroup.eu> |
powerpc/32s: Enable STRICT_MODULE_RWX for the 603 core The book3s/32 MMU doesn't support per page execution protection and doesn't support RO protection for kernel pages. However, on the 603 which implements software loaded TLBs, execution protection is honored by the TLB Miss handler which doesn't load Instruction TLB for non executable pages. And RO protection is honored by clearing the C bit for RO pages, leading to DSI. So on the 603, STRICT_MODULE_RWX is possible without much effort. Don't disable STRICT_MODULE_RWX on book3s/32 and print a warning in case STRICT_MODULE_RWX has been selected and the platform has a Hardware HASH MMU. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/1e6162f334167e75f1140082932e3a354b16daba.1642413973.git.christophe.leroy@csgroup.eu
|
#
f222ab83 |
|
24-Dec-2021 |
Christophe Leroy <christophe.leroy@csgroup.eu> |
powerpc: Add set_memory_{p/np}() and remove set_memory_attr() set_memory_attr() was implemented by commit 4d1755b6a762 ("powerpc/mm: implement set_memory_attr()") because the set_memory_xx() couldn't be used at that time to modify memory "on the fly" as explained it the commit. But set_memory_attr() uses set_pte_at() which leads to warnings when CONFIG_DEBUG_VM is selected, because set_pte_at() is unexpected for updating existing page table entries. The check could be bypassed by using __set_pte_at() instead, as it was the case before commit c988cfd38e48 ("powerpc/32: use set_memory_attr()") but since commit 9f7853d7609d ("powerpc/mm: Fix set_memory_*() against concurrent accesses") it is now possible to use set_memory_xx() functions to update page table entries "on the fly" because the update is now atomic. For DEBUG_PAGEALLOC we need to clear and set back _PAGE_PRESENT. Add set_memory_np() and set_memory_p() for that. Replace all uses of set_memory_attr() by the relevant set_memory_xx() and remove set_memory_attr(). Fixes: c988cfd38e48 ("powerpc/32: use set_memory_attr()") Cc: stable@vger.kernel.org Reported-by: Maxime Bizon <mbizon@freebox.fr> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Tested-by: Maxime Bizon <mbizon@freebox.fr> Reviewed-by: Russell Currey <ruscur@russell.cc> Depends-on: 9f7853d7609d ("powerpc/mm: Fix set_memory_*() against concurrent accesses") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/cda2b44b55c96f9ac69fa92e68c01084ec9495c5.1640344012.git.christophe.leroy@csgroup.eu
|
#
843a1ffa |
|
08-Nov-2021 |
Kefeng Wang <wangkefeng.wang@huawei.com> |
powerpc/mm: use core_kernel_text() helper Use core_kernel_text() helper to simplify code, also drop etext, _stext, _sinittext, _einittext declaration which already declared in section.h. Link: https://lkml.kernel.org/r/20210930071143.63410-10-wangkefeng.wang@huawei.com Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Alexander Potapenko <glider@google.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Petr Mladek <pmladek@suse.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
f8c0e36b |
|
28-Oct-2021 |
Christophe Leroy <christophe.leroy@csgroup.eu> |
powerpc: Don't provide __kernel_map_pages() without ARCH_SUPPORTS_DEBUG_PAGEALLOC When ARCH_SUPPORTS_DEBUG_PAGEALLOC is not selected, the user can still select CONFIG_DEBUG_PAGEALLOC in which case __kernel_map_pages() is provided by mm/page_poison.c So only define __kernel_map_pages() when both CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC and CONFIG_DEBUG_PAGEALLOC are defined. Fixes: 68b44f94d637 ("powerpc/booke: Disable STRICT_KERNEL_RWX, DEBUG_PAGEALLOC and KFENCE") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/971b69739ff4746252e711a9845210465c023a9e.1635425947.git.christophe.leroy@csgroup.eu
|
#
c988cfd3 |
|
08-Jun-2021 |
Christophe Leroy <christophe.leroy@csgroup.eu> |
powerpc/32: use set_memory_attr() Use set_memory_attr() instead of the PPC32 specific change_page_attr() change_page_attr() was checking that the address was not mapped by blocks and was handling highmem, but that's unneeded because the affected pages can't be in highmem and block mapping verification is already done by the callers. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> [ruscur: rebase on powerpc/merge with Christophe's new patches] Signed-off-by: Russell Currey <ruscur@russell.cc> Signed-off-by: Jordan Niethe <jniethe5@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210609013431.9805-10-jniethe5@gmail.com
|
#
79d1befe |
|
25-Nov-2020 |
Christophe Leroy <christophe.leroy@csgroup.eu> |
powerpc/32s: Don't hash_preload() kernel text We now always map kernel text with BATs. Neither need to preload hash with kernel text addresses nor ensure they are never evicted. This is more or less a revert of commit ee4f2ea48674 ("[POWERPC] Fix 32-bit mm operations when not using BATs") Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/0a0bab7fadd89aa829e33420fbc10d60c59040a7.1606285014.git.christophe.leroy@csgroup.eu
|
#
b84bf098 |
|
09-Nov-2020 |
Kaixu Xia <kaixuxia@tencent.com> |
powerpc/mm: Fix comparing pointer to 0 warning Fixes coccicheck warning: ./arch/powerpc/mm/pgtable_32.c:87:11-12: WARNING comparing pointer to 0 Avoid pointer type value compared to 0. Reported-by: Tosk Robot <tencent_os_robot@tencent.com> Signed-off-by: Kaixu Xia <kaixuxia@tencent.com> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/1604976961-20441-1-git-send-email-kaixuxia@tencent.com
|
#
b10d6bca |
|
13-Oct-2020 |
Mike Rapoport <rppt@kernel.org> |
arch, drivers: replace for_each_membock() with for_each_mem_range() There are several occurrences of the following pattern: for_each_memblock(memory, reg) { start = __pfn_to_phys(memblock_region_memory_base_pfn(reg); end = __pfn_to_phys(memblock_region_memory_end_pfn(reg)); /* do something with start and end */ } Using for_each_mem_range() iterator is more appropriate in such cases and allows simpler and cleaner code. [akpm@linux-foundation.org: fix arch/arm/mm/pmsa-v7.c build] [rppt@linux.ibm.com: mips: fix cavium-octeon build caused by memblock refactoring] Link: http://lkml.kernel.org/r/20200827124549.GD167163@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Baoquan He <bhe@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Daniel Axtens <dja@axtens.net> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Emil Renner Berthing <kernel@esmil.dk> Cc: Hari Bathini <hbathini@linux.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: https://lkml.kernel.org/r/20200818151634.14343-13-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
e05c7b1f |
|
08-Jun-2020 |
Mike Rapoport <rppt@kernel.org> |
mm: pgtable: add shortcuts for accessing kernel PMD and PTE The powerpc 32-bit implementation of pgtable has nice shortcuts for accessing kernel PMD and PTE for a given virtual address. Make these helpers available for all architectures. [rppt@linux.ibm.com: microblaze: fix page table traversal in setup_rt_frame()] Link: http://lkml.kernel.org/r/20200518191511.GD1118872@kernel.org [akpm@linux-foundation.org: s/pmd_ptr_k/pmd_off_k/ in various powerpc places] Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200514170327.31389-9-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
e31cf2f4 |
|
08-Jun-2020 |
Mike Rapoport <rppt@kernel.org> |
mm: don't include asm/pgtable.h if linux/mm.h is already included Patch series "mm: consolidate definitions of page table accessors", v2. The low level page table accessors (pXY_index(), pXY_offset()) are duplicated across all architectures and sometimes more than once. For instance, we have 31 definition of pgd_offset() for 25 supported architectures. Most of these definitions are actually identical and typically it boils down to, e.g. static inline unsigned long pmd_index(unsigned long address) { return (address >> PMD_SHIFT) & (PTRS_PER_PMD - 1); } static inline pmd_t *pmd_offset(pud_t *pud, unsigned long address) { return (pmd_t *)pud_page_vaddr(*pud) + pmd_index(address); } These definitions can be shared among 90% of the arches provided XYZ_SHIFT, PTRS_PER_XYZ and xyz_page_vaddr() are defined. For architectures that really need a custom version there is always possibility to override the generic version with the usual ifdefs magic. These patches introduce include/linux/pgtable.h that replaces include/asm-generic/pgtable.h and add the definitions of the page table accessors to the new header. This patch (of 12): The linux/mm.h header includes <asm/pgtable.h> to allow inlining of the functions involving page table manipulations, e.g. pte_alloc() and pmd_alloc(). So, there is no point to explicitly include <asm/pgtable.h> in the files that include <linux/mm.h>. The include statements in such cases are remove with a simple loop: for f in $(git grep -l "include <linux/mm.h>") ; do sed -i -e '/include <asm\/pgtable.h>/ d' $f done Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Mike Rapoport <rppt@kernel.org> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200514170327.31389-1-rppt@kernel.org Link: http://lkml.kernel.org/r/20200514170327.31389-2-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
34536d78 |
|
18-May-2020 |
Christophe Leroy <christophe.leroy@csgroup.eu> |
powerpc/8xx: Add a function to early map kernel via huge pages Add a function to early map kernel memory using huge pages. For 512k pages, just use standard page table and map in using 512k pages. For 8M pages, create a hugepd table and populate the two PGD entries with it. This function can only be used to create page tables at startup. Once the regular SLAB allocation functions replace memblock functions, this function cannot allocate new pages anymore. However it can still update existing mappings with new protections. hugepd_none() macro is moved into asm/hugetlb.h to be usable outside of mm/hugetlbpage.c early_pte_alloc_kernel() is made visible. _PAGE_HUGE flag is now displayed by ptdump. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> [mpe: Change ptdump display to use "huge"] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/68325bcd3b6f93127f7810418a2352c3519066d6.1589866984.git.christophe.leroy@csgroup.eu
|
#
4e3319c2 |
|
18-May-2020 |
Christophe Leroy <christophe.leroy@csgroup.eu> |
powerpc/mm: Fix conditions to perform MMU specific management by blocks on PPC32. Setting init mem to NX shall depend on sinittext being mapped by block, not on stext being mapped by block. Setting text and rodata to RO shall depend on stext being mapped by block, not on sinittext being mapped by block. Fixes: 63b2bc619565 ("powerpc/mm/32s: Use BATs for STRICT_KERNEL_RWX") Cc: stable@vger.kernel.org Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/7d565fb8f51b18a3d98445a830b2f6548cb2da2a.1589866984.git.christophe.leroy@csgroup.eu
|
#
925ac141 |
|
18-May-2020 |
Christophe Leroy <christophe.leroy@csgroup.eu> |
powerpc/mm: Allocate static page tables for fixmap Allocate static page tables for the fixmap area. This allows setting mappings through page tables before memblock is ready. That's needed to use early_ioremap() early and to use standard page mappings with fixmap. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/4f4b1412d34de6801b8e925cb88fc69d056ff536.1589866984.git.christophe.leroy@csgroup.eu
|
#
2efc7c08 |
|
09-Jan-2020 |
Christophe Leroy <christophe.leroy@c-s.fr> |
powerpc/32: drop get_pteptr() Commit 8d30c14cab30 ("powerpc/mm: Rework I$/D$ coherency (v3)") and commit 90ac19a8b21b ("[POWERPC] Abolish iopa(), mm_ptov(), io_block_mapping() from arch/powerpc") removed the use of get_pteptr() outside of mm/pgtable_32.c In mm/pgtable_32.c, the only user of get_pteptr() is change_page_attr() which operates on kernel context and on lowmem pages only. Make virt_to_kpte() available outside of mm/mem.c and use it instead of get_pteptr(), and drop get_pteptr() Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/788378c6c3ba5c5298caab7c7f95e6c3c88244b8.1578558199.git.christophe.leroy@c-s.fr
|
#
0b1c524c |
|
09-Jan-2020 |
Christophe Leroy <christophe.leroy@c-s.fr> |
powerpc/32: refactor pmd_offset(pud_offset(pgd_offset... At several places pmd pointer is retrieved through the same action: pmd = pmd_offset(pud_offset(pgd_offset(mm, addr), addr), addr); or pmd = pmd_offset(pud_offset(pgd_offset_k(addr), addr), addr); Refactor this by implementing two helpers pmd_ptr() and pmd_ptr_k() This will help when adding the p4d level. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/7b065c5be35726af4066cab238ee35cabceda1fa.1578558199.git.christophe.leroy@c-s.fr
|
#
e26ad936 |
|
14-Jan-2020 |
Christophe Leroy <christophe.leroy@c-s.fr> |
powerpc/ptdump: Fix W+X verification call in mark_rodata_ro() ptdump_check_wx() also have to be called when pages are mapped by blocks. Fixes: 453d87f6a8ae ("powerpc/mm: Warn if W+X pages found on boot") Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/37517da8310f4457f28921a4edb88fb21d27b62a.1578989531.git.christophe.leroy@c-s.fr
|
#
a2227a27 |
|
23-Aug-2019 |
Christophe Leroy <christophe.leroy@c-s.fr> |
powerpc/32: Don't populate page tables for block mapped pages except on the 8xx. Commit d2f15e0979ee ("powerpc/32: always populate page tables for Abatron BDI.") wrongly sets page tables for any PPC32 for using BDI, and does't update them after init (remove RX on init section, set text and rodata read-only) Only the 8xx requires page tables to be populated for using the BDI. They also need to be populated in order to see the mappings in /sys/kernel/debug/kernel_page_tables On BOOK3S_32, pages that are not mapped by page tables are mapped by BATs. The BDI knows BATs and they can be viewed in /sys/kernel/debug/powerpc/block_address_translation Only set pagetables for RAM and IMMR on the 8xx and properly update them at the end of init. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/c8610942203e0d93fcb02ad20c57edd3adb4c9d3.1566554029.git.christophe.leroy@c-s.fr
|
#
f381d571 |
|
20-Aug-2019 |
Christophe Leroy <christophe.leroy@c-s.fr> |
powerpc/mm: Move ioremap functions out of pgtable_32/64.c Create ioremap_32.c and ioremap_64.c and move respective ioremap functions out of pgtable_32.c and pgtable_64.c In the meantime, fix a few comments and changes a printk() to pr_warn(). Also fix a few oversplitted lines. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/b5c8b02ccefd4ede64c61b53cf64fb5dacb35740.1566309263.git.christophe.leroy@c-s.fr
|
#
7cd9b317 |
|
20-Aug-2019 |
Christophe Leroy <christophe.leroy@c-s.fr> |
powerpc/mm: make ioremap_bot common to all Drop multiple definitions of ioremap_bot and make one common to all subarches. Only CONFIG_PPC_BOOK3E_64 had a global static init value for ioremap_bot. Now ioremap_bot is set in early_init_mmu_global(). Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/920eebfd9f36f14c79d1755847f5bf7c83703bdd.1566309262.git.christophe.leroy@c-s.fr
|
#
edfe1a56 |
|
20-Aug-2019 |
Christophe Leroy <christophe.leroy@c-s.fr> |
powerpc/mm: move ioremap_prot() into ioremap.c Both ioremap_prot() are idenfical, move them into ioremap.c Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/0b3eb0e0f1490a99fd6c983e166fb8946233f151.1566309262.git.christophe.leroy@c-s.fr
|
#
4634c375 |
|
20-Aug-2019 |
Christophe Leroy <christophe.leroy@c-s.fr> |
powerpc/mm: move common 32/64 bits ioremap functions into ioremap.c ioremap(), ioremap_wc() and ioremap_coherent() are now identical on PPC32 and PPC64 as iowa_is_active() will always return false on PPC32. Move them into a new common location called ioremap.c Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/6223803ce024d6ab4dfaa919f44098aed5b4bc33.1566309262.git.christophe.leroy@c-s.fr
|
#
492643e8 |
|
20-Aug-2019 |
Christophe Leroy <christophe.leroy@c-s.fr> |
powerpc/mm: drop function __ioremap() __ioremap() is not used anymore, drop it. Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/ccc439f481a0884e00a6be1bab44bab2a4477fea.1566309262.git.christophe.leroy@c-s.fr
|
#
f49f4e2b |
|
15-Aug-2019 |
Christophe Leroy <christophe.leroy@c-s.fr> |
powerpc/mm: Simplify update_mmu_cache() on BOOK3S32 On BOOK3S32, hash_preload() neither use is_exec nor trap, so drop those parameters and simplify update_mmu_cached(). Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/35f143c6fe29f9fd25c7f3cd4448ae401029ce3c.1565933217.git.christophe.leroy@c-s.fr
|
#
46c2478a |
|
17-Jun-2019 |
Andreas Schwab <schwab@linux-m68k.org> |
powerpc/mm/32s: fix condition that is always true Move a misplaced paren that makes the condition always true. Fixes: 63b2bc619565 ("powerpc/mm/32s: Use BATs for STRICT_KERNEL_RWX") Cc: stable@vger.kernel.org # v5.1+ Signed-off-by: Andreas Schwab <schwab@linux-m68k.org> Reviewed-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
#
2874c5fd |
|
27-May-2019 |
Thomas Gleixner <tglx@linutronix.de> |
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152 Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
#
453d87f6 |
|
02-May-2019 |
Russell Currey <ruscur@russell.cc> |
powerpc/mm: Warn if W+X pages found on boot Implement code to walk all pages and warn if any are found to be both writable and executable. Depends on STRICT_KERNEL_RWX enabled, and is behind the DEBUG_WX config option. This only runs on boot and has no runtime performance implications. Very heavily influenced (and in some cases copied verbatim) from the ARM64 code written by Laura Abbott (thanks!), since our ptdump infrastructure is similar. Signed-off-by: Russell Currey <ruscur@russell.cc> [mpe: Fixup build error when disabled] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
#
b0124ff5 |
|
26-Apr-2019 |
Christophe Leroy <christophe.leroy@c-s.fr> |
powerpc/mm: inline pte_alloc_one_kernel() and pte_alloc_one() on PPC32 pte_alloc_one_kernel() and pte_alloc_one() are simple calls to pte_fragment_alloc(), so they are good candidates for inlining as already done on PPC64. Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
#
4a6d8cf9 |
|
26-Apr-2019 |
Christophe Leroy <christophe.leroy@c-s.fr> |
powerpc/mm: don't use pte_alloc_kernel() until slab is available on PPC32 In the same way as PPC64, implement early allocation functions and avoid calling pte_alloc_kernel() before slab is available. Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
#
9d9f2ccc |
|
29-Mar-2019 |
Christophe Leroy <christophe.leroy@c-s.fr> |
powerpc/mm: change #include "mmu_decl.h" to <mm/mmu_decl.h> This patch make inclusion of mmu_decl.h independant of the location of the file including it. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
#
63b2bc61 |
|
21-Feb-2019 |
Christophe Leroy <christophe.leroy@c-s.fr> |
powerpc/mm/32s: Use BATs for STRICT_KERNEL_RWX Today, STRICT_KERNEL_RWX is based on the use of regular pages to map kernel pages. On Book3s 32, it has three consequences: - Using pages instead of BAT for mapping kernel linear memory severely impacts performance. - Exec protection is not effective because no-execute cannot be set at page level (except on 603 which doesn't have hash tables) - Write protection is not effective because PP bits do not provide RO mode for kernel-only pages (except on 603 which handles it in software via PAGE_DIRTY) On the 603+, we have: - Independent IBAT and DBAT allowing limitation of exec parts. - NX bit can be set in segment registers to forbit execution on memory mapped by pages. - RO mode on DBATs even for kernel-only blocks. On the 601, there is nothing much we can do other than warn the user about it, because: - BATs are common to instructions and data. - BAT do not provide RO mode for kernel-only blocks. - segment registers don't have the NX bit. In order to use IBAT for exec protection, this patch: - Aligns _etext to BAT block sizes (128kb) - Set NX bit in kernel segment register (Except on vmalloc area when CONFIG_MODULES is selected) - Maps kernel text with IBATs. In order to use DBAT for exec protection, this patch: - Aligns RW DATA to BAT block sizes (4M) - Maps kernel RO area with write prohibited DBATs - Maps remaining memory with remaining DBATs Here is what we get with this patch on a 832x when activating STRICT_KERNEL_RWX: Symbols: c0000000 T _stext c0680000 R __start_rodata c0680000 R _etext c0800000 T __init_begin c0800000 T _sinittext ~# cat /sys/kernel/debug/block_address_translation ---[ Instruction Block Address Translation ]--- 0: 0xc0000000-0xc03fffff 0x00000000 Kernel EXEC coherent 1: 0xc0400000-0xc05fffff 0x00400000 Kernel EXEC coherent 2: 0xc0600000-0xc067ffff 0x00600000 Kernel EXEC coherent 3: - 4: - 5: - 6: - 7: - ---[ Data Block Address Translation ]--- 0: 0xc0000000-0xc07fffff 0x00000000 Kernel RO coherent 1: 0xc0800000-0xc0ffffff 0x00800000 Kernel RW coherent 2: 0xc1000000-0xc1ffffff 0x01000000 Kernel RW coherent 3: 0xc2000000-0xc3ffffff 0x02000000 Kernel RW coherent 4: 0xc4000000-0xc7ffffff 0x04000000 Kernel RW coherent 5: 0xc8000000-0xcfffffff 0x08000000 Kernel RW coherent 6: 0xd0000000-0xdfffffff 0x10000000 Kernel RW coherent 7: - ~# cat /sys/kernel/debug/segment_registers ---[ User Segments ]--- 0x00000000-0x0fffffff Kern key 1 User key 1 VSID 0xa085d0 0x10000000-0x1fffffff Kern key 1 User key 1 VSID 0xa086e1 0x20000000-0x2fffffff Kern key 1 User key 1 VSID 0xa087f2 0x30000000-0x3fffffff Kern key 1 User key 1 VSID 0xa08903 0x40000000-0x4fffffff Kern key 1 User key 1 VSID 0xa08a14 0x50000000-0x5fffffff Kern key 1 User key 1 VSID 0xa08b25 0x60000000-0x6fffffff Kern key 1 User key 1 VSID 0xa08c36 0x70000000-0x7fffffff Kern key 1 User key 1 VSID 0xa08d47 0x80000000-0x8fffffff Kern key 1 User key 1 VSID 0xa08e58 0x90000000-0x9fffffff Kern key 1 User key 1 VSID 0xa08f69 0xa0000000-0xafffffff Kern key 1 User key 1 VSID 0xa0907a 0xb0000000-0xbfffffff Kern key 1 User key 1 VSID 0xa0918b ---[ Kernel Segments ]--- 0xc0000000-0xcfffffff Kern key 0 User key 1 No Exec VSID 0x000ccc 0xd0000000-0xdfffffff Kern key 0 User key 1 No Exec VSID 0x000ddd 0xe0000000-0xefffffff Kern key 0 User key 1 No Exec VSID 0x000eee 0xf0000000-0xffffffff Kern key 0 User key 1 No Exec VSID 0x000fff Aligning _etext to 128kb allows to map up to 32Mb text with 8 IBATs: 16Mb + 8Mb + 4Mb + 2Mb + 1Mb + 512kb + 256kb + 128kb (+ 128kb) = 32Mb (A 9th IBAT is unneeded as 32Mb would need only a single 32Mb block) Aligning data to 4M allows to map up to 512Mb data with 8 DBATs: 16Mb + 8Mb + 4Mb + 4Mb + 32Mb + 64Mb + 128Mb + 256Mb = 512Mb Because some processors only have 4 BATs and because some targets need DBATs for mapping other areas, the following patch will allow to modify _etext and data alignment. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
#
d2f15e09 |
|
21-Feb-2019 |
Christophe Leroy <christophe.leroy@c-s.fr> |
powerpc/32: always populate page tables for Abatron BDI. When CONFIG_BDI_SWITCH is set, the page tables have to be populated allthough large TLBs are used, because the BDI switch knows nothing about those large TLBs which are handled directly in TLB miss logic. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
#
9e849f23 |
|
21-Feb-2019 |
Christophe Leroy <christophe.leroy@c-s.fr> |
powerpc/mm/32s: use generic mmu_mapin_ram() for all blocks. Now that mmu_mapin_ram() is able to handle other blocks than the one starting at 0, the WII can use it for all its blocks. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
#
14e609d6 |
|
21-Feb-2019 |
Christophe Leroy <christophe.leroy@c-s.fr> |
powerpc/mm/32: add base address to mmu_mapin_ram() At the time being, mmu_mapin_ram() always maps RAM from the beginning. But some platforms like the WII have to map a second block of RAM. This patch adds to mmu_mapin_ram() the base address of the block. At the moment, only base address 0 is supported. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
#
4cf58924 |
|
03-Jan-2019 |
Joel Fernandes (Google) <joel@joelfernandes.org> |
mm: treewide: remove unused address argument from pte_alloc functions Patch series "Add support for fast mremap". This series speeds up the mremap(2) syscall by copying page tables at the PMD level even for non-THP systems. There is concern that the extra 'address' argument that mremap passes to pte_alloc may do something subtle architecture related in the future that may make the scheme not work. Also we find that there is no point in passing the 'address' to pte_alloc since its unused. This patch therefore removes this argument tree-wide resulting in a nice negative diff as well. Also ensuring along the way that the enabled architectures do not do anything funky with the 'address' argument that goes unnoticed by the optimization. Build and boot tested on x86-64. Build tested on arm64. The config enablement patch for arm64 will be posted in the future after more testing. The changes were obtained by applying the following Coccinelle script. (thanks Julia for answering all Coccinelle questions!). Following fix ups were done manually: * Removal of address argument from pte_fragment_alloc * Removal of pte_alloc_one_fast definitions from m68k and microblaze. // Options: --include-headers --no-includes // Note: I split the 'identifier fn' line, so if you are manually // running it, please unsplit it so it runs for you. virtual patch @pte_alloc_func_def depends on patch exists@ identifier E2; identifier fn =~ "^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$"; type T2; @@ fn(... - , T2 E2 ) { ... } @pte_alloc_func_proto_noarg depends on patch exists@ type T1, T2, T3, T4; identifier fn =~ "^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$"; @@ ( - T3 fn(T1, T2); + T3 fn(T1); | - T3 fn(T1, T2, T4); + T3 fn(T1, T2); ) @pte_alloc_func_proto depends on patch exists@ identifier E1, E2, E4; type T1, T2, T3, T4; identifier fn =~ "^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$"; @@ ( - T3 fn(T1 E1, T2 E2); + T3 fn(T1 E1); | - T3 fn(T1 E1, T2 E2, T4 E4); + T3 fn(T1 E1, T2 E2); ) @pte_alloc_func_call depends on patch exists@ expression E2; identifier fn =~ "^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$"; @@ fn(... -, E2 ) @pte_alloc_macro depends on patch exists@ identifier fn =~ "^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$"; identifier a, b, c; expression e; position p; @@ ( - #define fn(a, b, c) e + #define fn(a, b) e | - #define fn(a, b) e + #define fn(a) e ) Link: http://lkml.kernel.org/r/20181108181201.88826-2-joelaf@google.com Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Suggested-by: Kirill A. Shutemov <kirill@shutemov.name> Acked-by: Kirill A. Shutemov <kirill@shutemov.name> Cc: Michal Hocko <mhocko@kernel.org> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: William Kucharski <william.kucharski@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
6bf752da |
|
19-Dec-2018 |
Christophe Leroy <christophe.leroy@c-s.fr> |
powerpc: implement CONFIG_DEBUG_VIRTUAL This patch implements CONFIG_DEBUG_VIRTUAL to warn about incorrect use of virt_to_phys() and page_to_phys() Below is the result of test_debug_virtual: [ 1.438746] WARNING: CPU: 0 PID: 1 at ./arch/powerpc/include/asm/io.h:808 test_debug_virtual_init+0x3c/0xd4 [ 1.448156] CPU: 0 PID: 1 Comm: swapper Not tainted 4.20.0-rc5-00560-g6bfb52e23a00-dirty #532 [ 1.457259] NIP: c066c550 LR: c0650ccc CTR: c066c514 [ 1.462257] REGS: c900bdb0 TRAP: 0700 Not tainted (4.20.0-rc5-00560-g6bfb52e23a00-dirty) [ 1.471184] MSR: 00029032 <EE,ME,IR,DR,RI> CR: 48000422 XER: 20000000 [ 1.477811] [ 1.477811] GPR00: c0650ccc c900be60 c60d0000 00000000 006000c0 c9000000 00009032 c7fa0020 [ 1.477811] GPR08: 00002400 00000001 09000000 00000000 c07b5d04 00000000 c00037d8 00000000 [ 1.477811] GPR16: 00000000 00000000 00000000 00000000 c0760000 c0740000 00000092 c0685bb0 [ 1.477811] GPR24: c065042c c068a734 c0685b8c 00000006 00000000 c0760000 c075c3c0 ffffffff [ 1.512711] NIP [c066c550] test_debug_virtual_init+0x3c/0xd4 [ 1.518315] LR [c0650ccc] do_one_initcall+0x8c/0x1cc [ 1.523163] Call Trace: [ 1.525595] [c900be60] [c0567340] 0xc0567340 (unreliable) [ 1.530954] [c900be90] [c0650ccc] do_one_initcall+0x8c/0x1cc [ 1.536551] [c900bef0] [c0651000] kernel_init_freeable+0x1f4/0x2cc [ 1.542658] [c900bf30] [c00037ec] kernel_init+0x14/0x110 [ 1.547913] [c900bf40] [c000e1d0] ret_from_kernel_thread+0x14/0x1c [ 1.553971] Instruction dump: [ 1.556909] 3ca50100 bfa10024 54a5000e 3fa0c076 7c0802a6 3d454000 813dc204 554893be [ 1.564566] 7d294010 7d294910 90010034 39290001 <0f090000> 7c3e0b78 955e0008 3fe0c062 [ 1.572425] ---[ end trace 6f6984225b280ad6 ]--- [ 1.577467] PA: 0x09000000 for VA: 0xc9000000 [ 1.581799] PA: 0x061e8f50 for VA: 0xc61e8f50 Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
#
32ea4c14 |
|
29-Nov-2018 |
Christophe Leroy <christophe.leroy@c-s.fr> |
powerpc/mm: Extend pte_fragment functionality to PPC32 In order to allow the 8xx to handle pte_fragments, this patch extends the use of pte_fragments to PPC32 platforms. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
#
68289ae9 |
|
17-Nov-2018 |
Christophe Leroy <christophe.leroy@c-s.fr> |
powerpc: change CONFIG_PPC_STD_MMU_32 to CONFIG_PPC_BOOK3S_32 Today we have: config PPC_BOOK3S_32 bool "512x/52xx/6xx/7xx/74xx/82xx/83xx/86xx" [depends on PPC32 within a choice] config PPC_BOOK3S def_bool y depends on PPC_BOOK3S_32 || PPC_BOOK3S_64 config PPC_STD_MMU def_bool y depends on PPC_BOOK3S config PPC_STD_MMU_32 def_bool y depends on PPC_STD_MMU && PPC32 PPC_STD_MMU_32 is therefore redundant with PPC_BOOK3S_32. In order to make the code clearer, lets use preferably PPC_BOOK3S_32. This will allow to remove CONFIG_PPC_STD_MMU_32 in a later patch. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
#
9a8dd708 |
|
30-Oct-2018 |
Mike Rapoport <rppt@linux.vnet.ibm.com> |
memblock: rename memblock_alloc{_nid,_try_nid} to memblock_phys_alloc* Make it explicit that the caller gets a physical address rather than a virtual one. This will also allow using meblock_alloc prefix for memblock allocations returning virtual address, which is done in the following patches. The conversion is done using the following semantic patch: @@ expression e1, e2, e3; @@ ( - memblock_alloc(e1, e2) + memblock_phys_alloc(e1, e2) | - memblock_alloc_nid(e1, e2, e3) + memblock_phys_alloc_nid(e1, e2, e3) | - memblock_alloc_try_nid(e1, e2, e3) + memblock_phys_alloc_try_nid(e1, e2, e3) ) Link: http://lkml.kernel.org/r/1536927045-23536-7-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
26973fa5 |
|
09-Oct-2018 |
Christophe Leroy <christophe.leroy@c-s.fr> |
powerpc/mm: use pte helpers in generic code Get rid of platform specific _PAGE_XXXX in powerpc common code and use helpers instead. mm/dump_linuxpagetables.c will be handled separately Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
#
34eb138e |
|
09-Oct-2018 |
Christophe Leroy <christophe.leroy@c-s.fr> |
powerpc/mm: don't use _PAGE_EXEC for calling hash_preload() The 'access' parameter of hash_preload() is either 0 or _PAGE_EXEC. Among the two versions of hash_preload(), only the PPC64 one is doing something with this 'access' parameter. In order to remove the use of _PAGE_EXEC outside platform code, 'access' parameter is replaced by 'is_exec' which will be either true of false, and the PPC64 version of hash_preload() creates the access flag based on 'is_exec'. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
#
c766ee72 |
|
09-Oct-2018 |
Christophe Leroy <christophe.leroy@c-s.fr> |
powerpc: handover page flags with a pgprot_t parameter In order to avoid multiple conversions, handover directly a pgprot_t to map_kernel_page() as already done for radix. Do the same for __ioremap_caller() and __ioremap_at(). Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
#
56f3c1413 |
|
09-Oct-2018 |
Christophe Leroy <christophe.leroy@c-s.fr> |
powerpc/mm: properly set PAGE_KERNEL flags in ioremap() Set PAGE_KERNEL directly in the caller and do not rely on a hack adding PAGE_KERNEL flags when _PAGE_PRESENT is not set. As already done for PPC64, use pgprot_cache() helpers instead of _PAGE_XXX flags in PPC32 ioremap() derived functions. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
#
86c391bd |
|
09-Oct-2018 |
Christophe Leroy <christophe.leroy@c-s.fr> |
powerpc/32: Add ioremap_wt() and ioremap_coherent() Other arches have ioremap_wt() to map IO areas write-through. Implement it on PPC as well in order to avoid drivers using __ioremap(_PAGE_WRITETHRU) Also implement ioremap_coherent() to avoid drivers using __ioremap(_PAGE_COHERENT) Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
#
7e140591 |
|
27-Mar-2018 |
Jonathan Neuschäfer <j.neuschaefer@gmx.net> |
powerpc/mm/32: Remove the reserved memory hack This hack, introduced in commit c5df7f775148 ("powerpc: allow ioremap within reserved memory regions") is now unnecessary. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
#
2bbf6326 |
|
27-Mar-2018 |
Jonathan Neuschäfer <j.neuschaefer@gmx.net> |
powerpc/mm/32: Use page_is_ram to check for RAM On systems where there is MMIO space between different blocks of RAM in the physical address space, __ioremap_caller did not allow mapping these MMIO areas, because they were below the end RAM and thus considered RAM as well. Use the memblock-based page_is_ram function, which returns false for such MMIO holes. v2: Keep the check for p < virt_to_phys(high_memory). On 32-bit systems with high memory (memory above physical address 4GiB), the high memory is expected to be available though ioremap. The high_memory variable marks the end of low memory; comparing against it means that only ioremap requests for low RAM will be denied. Reported by Michael Ellerman. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
#
812fadcb |
|
12-Jan-2018 |
Christophe Leroy <christophe.leroy@c-s.fr> |
powerpc/mm: extend _PAGE_PRIVILEGED to all CPUs commit ac29c64089b74 ("powerpc/mm: Replace _PAGE_USER with _PAGE_PRIVILEGED") introduced _PAGE_PRIVILEGED for BOOK3S/64 This patch generalises _PAGE_PRIVILEGED for all CPUs, allowing to have either _PAGE_PRIVILEGED or _PAGE_USER or both. PPC_8xx has a _PAGE_SHARED flag which is set for and only for all non user pages. Lets rename it _PAGE_PRIVILEGED to remove confusion as it has nothing to do with Linux shared pages. On BookE, there's a _PAGE_BAP_SR which has to be set for kernel pages: defining _PAGE_PRIVILEGED as _PAGE_BAP_SR will make this generic Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
#
7c6a4f3b |
|
24-Sep-2017 |
Guenter Roeck <linux@roeck-us.net> |
powerpc/mm: Call flush_tlb_kernel_range with interrupts enabled flush_tlb_kernel_range() may call smp_call_function_many() which expects interrupts to be enabled. This results in a traceback. WARNING: CPU: 0 PID: 1 at kernel/smp.c:416 smp_call_function_many+0xcc/0x2fc CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.14.0-rc1-00009-g0666f56 #1 task: cf830000 task.stack: cf82e000 NIP: c00a93c8 LR: c00a9634 CTR: 00000001 REGS: cf82fde0 TRAP: 0700 Not tainted (4.14.0-rc1-00009-g0666f56) MSR: 00021000 <CE,ME> CR: 24000082 XER: 00000000 GPR00: c00a9634 cf82fe90 cf830000 c050ad3c c0015a54 00000000 00000001 00000001 GPR08: 00000001 00000000 00000000 cf82e000 24000084 00000000 c0003150 00000000 GPR16: 00000000 00000000 00000000 00000000 00000000 00000001 00000000 c0510000 GPR24: 00000000 c0015a54 00000000 c050ad3c c051823c c050ad3c 00000025 00000000 NIP [c00a93c8] smp_call_function_many+0xcc/0x2fc LR [c00a9634] smp_call_function+0x3c/0x50 Call Trace: [cf82fe90] [00000010] 0x10 (unreliable) [cf82fed0] [c00a9634] smp_call_function+0x3c/0x50 [cf82fee0] [c0015d2c] flush_tlb_kernel_range+0x20/0x38 [cf82fef0] [c001524c] mark_initmem_nx+0x154/0x16c [cf82ff20] [c001484c] free_initmem+0x20/0x4c [cf82ff30] [c000316c] kernel_init+0x1c/0x108 [cf82ff40] [c000f3a8] ret_from_kernel_thread+0x5c/0x64 Instruction dump: 7c0803a6 7d808120 38210040 4e800020 3d20c052 812981a0 2f890000 40beffac 3d20c051 8929ac64 2f890000 40beff9c <0fe00000> 4bffff94 7fc3f378 7f64db78 Fixes: 3184cc4b6f6a ("powerpc/mm: Fix kernel RAM protection after freeing ...") Fixes: e611939fc8ec ("powerpc/mm: Ensure change_page_attr() doesn't ...") Cc: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
#
4cfac2f9 |
|
02-Aug-2017 |
Christophe Leroy <christophe.leroy@c-s.fr> |
powerpc/mm: Simplify __set_fixmap() __set_fixmap() uses __fix_to_virt() then does the boundary checks by it self. Instead, we can use fix_to_virt() which does the verification at build time. For this, we need to use it inline so that GCC can see the real value of idx at buildtime. In the meantime, we remove the 'fixmaps' variable. This variable is set but has never been used from the beginning (commit 2c419bdeca1d9 ("[POWERPC] Port fixmap from x86 and use for kmap_atomic")) Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
#
86b19520 |
|
02-Aug-2017 |
Christophe Leroy <christophe.leroy@c-s.fr> |
powerpc/mm: declare some local functions static get_pteptr() and __mapin_ram_chunk() are only used locally, so define them static Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
#
95902e6c |
|
02-Aug-2017 |
Christophe Leroy <christophe.leroy@c-s.fr> |
powerpc/mm: Implement STRICT_KERNEL_RWX on PPC32 This patch implements STRICT_KERNEL_RWX on PPC32. As for CONFIG_DEBUG_PAGEALLOC, it deactivates BAT and LTLB mappings in order to allow page protection setup at the level of each page. As BAT/LTLB mappings are deactivated, there might be a performance impact. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
#
3184cc4b |
|
02-Aug-2017 |
Christophe Leroy <christophe.leroy@c-s.fr> |
powerpc/mm: Fix kernel RAM protection after freeing unused memory on PPC32 As seen below, allthough the init sections have been freed, the associated memory area is still marked as executable in the page tables. ~ dmesg [ 5.860093] Freeing unused kernel memory: 592K (c0570000 - c0604000) ~ cat /sys/kernel/debug/kernel_page_tables ---[ Start of kernel VM ]--- 0xc0000000-0xc0497fff 4704K rw X present dirty accessed shared 0xc0498000-0xc056ffff 864K rw present dirty accessed shared 0xc0570000-0xc059ffff 192K rw X present dirty accessed shared 0xc05a0000-0xc7ffffff 125312K rw present dirty accessed shared ---[ vmalloc() Area ]--- This patch fixes that. The implementation is done by reusing the change_page_attr() function implemented for CONFIG_DEBUG_PAGEALLOC Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
#
e611939f |
|
02-Aug-2017 |
Christophe Leroy <christophe.leroy@c-s.fr> |
powerpc/mm: Ensure change_page_attr() doesn't invalidate pinned TLBs __change_page_attr() uses flush_tlb_page(). flush_tlb_page() uses tlbie instruction, which also invalidates pinned TLBs, which is not what we expect. This patch modifies the implementation to use flush_tlb_kernel_range() instead. This will make use of tlbia which will preserve pinned TLBs. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
#
4386c096 |
|
29-May-2017 |
Christophe Leroy <christophe.leroy@c-s.fr> |
powerpc/mm: Rename map_page() to map_kernel_page() on 32-bit These two functions implement the same semantics, so unify their naming so we can share code that calls them. The longer name is more descriptive so use it. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Acked-by: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
#
abd667be |
|
01-May-2017 |
Balbir Singh <bsingharora@gmail.com> |
powerpc/mm/book(e)(3s)/32: Add page table accounting Add support in pte_alloc_one() and pgd_alloc() by passing __GFP_ACCOUNT in the flags Signed-off-by: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
#
9affa9e2 |
|
29-May-2017 |
Christophe Leroy <christophe.leroy@c-s.fr> |
powerpc/mm: Remove __this_fixmap_does_not_exist() This function has not been used since commit 9494a1e8428ea ("powerpc: use generic fixmap.h) Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
#
9b081e10 |
|
07-Dec-2016 |
Christophe Leroy <christophe.leroy@c-s.fr> |
powerpc: port 64 bits pgtable_cache to 32 bits Today powerpc64 uses a set of pgtable_caches while powerpc32 uses standard pages when using 4k pages and a single pgtable_cache if using other size pages. In preparation of implementing huge pages on the 8xx, this patch replaces the specific powerpc32 handling by the 64 bits approach. This is done by: * moving 64 bits pgtable_cache_add() and pgtable_cache_init() in a new file called init-common.c * modifying pgtable_cache_init() to also handle the case without PMD * removing the 32 bits version of pgtable_cache_add() and pgtable_cache_init() * copying related header contents from 64 bits into both the book3s/32 and nohash/32 header files On the 8xx, the following cache sizes will be used: * 4k pages mode: - PGT_CACHE(10) for PGD - PGT_CACHE(3) for 512k hugepage tables * 16k pages mode: - PGT_CACHE(6) for PGD - PGT_CACHE(7) for 512k hugepage tables - PGT_CACHE(3) for 8M hugepage tables Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Scott Wood <oss@buserror.net>
|
#
bd721ea7 |
|
02-Aug-2016 |
Fabian Frederick <fabf@skynet.be> |
treewide: replace obsolete _refok by __ref There was only one use of __initdata_refok and __exit_refok __init_refok was used 46 times against 82 for __ref. Those definitions are obsolete since commit 312b1485fb50 ("Introduce new section reference annotations tags: __ref, __refdata, __refconst") This patch removes the following compatibility definitions and replaces them treewide. /* compatibility defines */ #define __init_refok __ref #define __initdata_refok __refdata #define __exit_refok __ref I can also provide separate patches if necessary. (One patch per tree and check in 1 month or 2 to remove old definitions) [akpm@linux-foundation.org: coding-style fixes] Link: http://lkml.kernel.org/r/1466796271-3043-1-git-send-email-fabf@skynet.be Signed-off-by: Fabian Frederick <fabf@skynet.be> Cc: Ingo Molnar <mingo@redhat.com> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
32d6bd90 |
|
24-Jun-2016 |
Michal Hocko <mhocko@suse.com> |
tree wide: get rid of __GFP_REPEAT for order-0 allocations part I This is the third version of the patchset previously sent [1]. I have basically only rebased it on top of 4.7-rc1 tree and dropped "dm: get rid of superfluous gfp flags" which went through dm tree. I am sending it now because it is tree wide and chances for conflicts are reduced considerably when we want to target rc2. I plan to send the next step and rename the flag and move to a better semantic later during this release cycle so we will have a new semantic ready for 4.8 merge window hopefully. Motivation: While working on something unrelated I've checked the current usage of __GFP_REPEAT in the tree. It seems that a majority of the usage is and always has been bogus because __GFP_REPEAT has always been about costly high order allocations while we are using it for order-0 or very small orders very often. It seems that a big pile of them is just a copy&paste when a code has been adopted from one arch to another. I think it makes some sense to get rid of them because they are just making the semantic more unclear. Please note that GFP_REPEAT is documented as * __GFP_REPEAT: Try hard to allocate the memory, but the allocation attempt * _might_ fail. This depends upon the particular VM implementation. while !costly requests have basically nofail semantic. So one could reasonably expect that order-0 request with __GFP_REPEAT will not loop for ever. This is not implemented right now though. I would like to move on with __GFP_REPEAT and define a better semantic for it. $ git grep __GFP_REPEAT origin/master | wc -l 111 $ git grep __GFP_REPEAT | wc -l 36 So we are down to the third after this patch series. The remaining places really seem to be relying on __GFP_REPEAT due to large allocation requests. This still needs some double checking which I will do later after all the simple ones are sorted out. I am touching a lot of arch specific code here and I hope I got it right but as a matter of fact I even didn't compile test for some archs as I do not have cross compiler for them. Patches should be quite trivial to review for stupid compile mistakes though. The tricky parts are usually hidden by macro definitions and thats where I would appreciate help from arch maintainers. [1] http://lkml.kernel.org/r/1461849846-27209-1-git-send-email-mhocko@kernel.org This patch (of 19): __GFP_REPEAT has a rather weak semantic but since it has been introduced around 2.6.12 it has been ignored for low order allocations. Yet we have the full kernel tree with its usage for apparently order-0 allocations. This is really confusing because __GFP_REPEAT is explicitly documented to allow allocation failures which is a weaker semantic than the current order-0 has (basically nofail). Let's simply drop __GFP_REPEAT from those places. This would allow to identify place which really need allocator to retry harder and formulate a more specific semantic for what the flag is supposed to do actually. Link: http://lkml.kernel.org/r/1464599699-30131-2-git-send-email-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Andy Lutomirski <luto@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chen Liqin <liqin.linux@gmail.com> Cc: Chris Metcalf <cmetcalf@mellanox.com> [for tile] Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: John Crispin <blogic@openwrt.org> Cc: Lennox Wu <lennox.wu@gmail.com> Cc: Ley Foon Tan <lftan@altera.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
060ef9d8 |
|
10-Feb-2016 |
Christophe Leroy <christophe.leroy@c-s.fr> |
powerpc32: PAGE_EXEC required for inittext PAGE_EXEC is required for inittext, otherwise CONFIG_DEBUG_PAGEALLOC ends up with an Oops [ 0.000000] Inode-cache hash table entries: 8192 (order: 1, 32768 bytes) [ 0.000000] Sorting __ex_table... [ 0.000000] bootmem::free_all_bootmem_core nid=0 start=0 end=2000 [ 0.000000] Unable to handle kernel paging request for instruction fetch [ 0.000000] Faulting instruction address: 0xc045b970 [ 0.000000] Oops: Kernel access of bad area, sig: 11 [#1] [ 0.000000] PREEMPT DEBUG_PAGEALLOC CMPC885 [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 3.18.25-local-dirty #1673 [ 0.000000] task: c04d83d0 ti: c04f8000 task.ti: c04f8000 [ 0.000000] NIP: c045b970 LR: c045b970 CTR: 0000000a [ 0.000000] REGS: c04f9ea0 TRAP: 0400 Not tainted (3.18.25-local-dirty) [ 0.000000] MSR: 08001032 <ME,IR,DR,RI> CR: 39955d35 XER: a000ff40 [ 0.000000] GPR00: c045b970 c04f9f50 c04d83d0 00000000 ffffffff c04dcdf4 00000048 c04f6b10 GPR08: c04f6ab0 00000001 c0563488 c04f6ab0 c04f8000 00000000 00000000 b6db6db7 GPR16: 00003474 00000180 00002000 c7fec000 00000000 000003ff 00000176 c0415014 GPR24: c0471018 c0414ee8 c05304e8 c03aeaac c0510000 c0471018 c0471010 00000000 [ 0.000000] NIP [c045b970] free_all_bootmem+0x164/0x228 [ 0.000000] LR [c045b970] free_all_bootmem+0x164/0x228 [ 0.000000] Call Trace: [ 0.000000] [c04f9f50] [c045b970] free_all_bootmem+0x164/0x228 (unreliable) [ 0.000000] [c04f9fa0] [c0454044] mem_init+0x3c/0xd0 [ 0.000000] [c04f9fb0] [c045080c] start_kernel+0x1f4/0x390 [ 0.000000] [c04f9ff0] [c0002214] start_here+0x38/0x98 [ 0.000000] Instruction dump: [ 0.000000] 2f150000 7f968840 72a90001 3ad60001 56b5f87e 419a0028 419e0024 41a20018 [ 0.000000] 807cc20c 38800000 7c638214 4bffd2f5 <3a940001> 3a100024 4bffffc8 7e368b78 [ 0.000000] ---[ end trace dc8fa200cb88537f ]--- Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Scott Wood <oss@buserror.net>
|
#
e974cd4b |
|
09-Feb-2016 |
Christophe Leroy <christophe.leroy@c-s.fr> |
powerpc32: remove ioremap_base ioremap_base is not initialised and is nowhere used so remove it Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Scott Wood <oss@buserror.net>
|
#
3084cdb7 |
|
09-Feb-2016 |
Christophe Leroy <christophe.leroy@c-s.fr> |
powerpc32: refactor x_mapped_by_bats() and x_mapped_by_tlbcam() together x_mapped_by_bats() and x_mapped_by_tlbcam() serve the same kind of purpose, and are never defined at the same time. So rename them x_block_mapped() and define them in the relevant places Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Scott Wood <oss@buserror.net>
|
#
f691fa10 |
|
29-Mar-2015 |
Michael Ellerman <mpe@ellerman.id.au> |
powerpc: Replace mem_init_done with slab_is_available() We have a powerpc specific global called mem_init_done which is "set on boot once kmalloc can be called". But that's not *quite* true. We set it at the bottom of mem_init(), and rely on the fact that mm_init() calls kmem_cache_init() immediately after that, and nothing is running in parallel. So replace it with the generic and 100% correct slab_is_available(). Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
#
4f9c53c8 |
|
25-Mar-2015 |
Michael Ellerman <mpe@ellerman.id.au> |
powerpc: Fix compile errors with STRICT_MM_TYPECHECKS enabled Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> [mpe: Fix the 32-bit code also] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
#
91108335 |
|
25-Mar-2015 |
Michael Ellerman <mpe@ellerman.id.au> |
powerpc/mm: Remove duplicate declaration of setbat() This is already declared in mmu_decl.h, so we don't need a second version in the C file. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
#
cc83458d |
|
11-Mar-2015 |
Scott Wood <scottwood@freescale.com> |
powerpc/32: %pF is only for function pointers Use %pS for actual addresses, otherwise you'll get bad output on arches like ppc64 where %pF expects a function descriptor. Even on other architectures, refrain from setting a bad example that people copy. Signed-off-by: Scott Wood <scottwood@freescale.com> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
#
ce67f5d0 |
|
20-Jan-2015 |
LEROY Christophe <christophe.leroy@c-s.fr> |
powerpc32: Use kmem_cache memory for PGDIR When pages are not 4K, PGDIR table is allocated with kmalloc(). In order to optimise TLB handlers, aligned memory is needed. kmalloc() doesn't provide aligned memory blocks, so lets use a kmem_cache pool instead. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Scott Wood <scottwood@freescale.com>
|
#
a7b9f671 |
|
19-Jan-2015 |
LEROY Christophe <christophe.leroy@c-s.fr> |
powerpc32: adds handling of _PAGE_RO Some powerpc like the 8xx don't have a RW bit in PTE bits but a RO (Read Only) bit. This patch implements the handling of a _PAGE_RO flag to be used in place of _PAGE_RW Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> [scottwood@freescale.com: fix whitespace] Signed-off-by: Scott Wood <scottwood@freescale.com>
|
#
238cac16 |
|
21-Jan-2015 |
Emil Medve <Emilian.Medve@freescale.com> |
powerpc: Remove duplicate tlbcam_index declarations They seem to be leftovers from '14cf11a powerpc: Merge enough to start building in arch/powerpc' Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
|
#
031bc574 |
|
12-Dec-2014 |
Joonsoo Kim <iamjoonsoo.kim@lge.com> |
mm/debug-pagealloc: make debug-pagealloc boottime configurable Now, we have prepared to avoid using debug-pagealloc in boottime. So introduce new kernel-parameter to disable debug-pagealloc in boottime, and makes related functions to be disabled in this case. Only non-intuitive part is change of guard page functions. Because guard page is effective only if debug-pagealloc is enabled, turning off according to debug-pagealloc is reasonable thing to do. Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Dave Hansen <dave@sr71.net> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Jungsoo Son <jungsoo.son@lge.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
10239733 |
|
17-Sep-2014 |
Anton Blanchard <anton@samba.org> |
powerpc: Remove bootmem allocator At the moment we transition from the memblock alloctor to the bootmem allocator. Gitting rid of the bootmem allocator removes a bunch of complicated code (most of which I owe the dubious honour of being responsible for writing). Signed-off-by: Anton Blanchard <anton@samba.org> Tested-by: Emil Medve <Emilian.Medve@Freescale.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
#
c3993f10 |
|
09-Jul-2014 |
Michael Ellerman <mpe@ellerman.id.au> |
powerpc: Remove CONFIG_POWER3 Now that we have dropped power3 support we can remove CONFIG_POWER3. The usage in pgtable_32.c was already dead code as CONFIG_POWER3 was not selectable on PPC32. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
|
#
47ce8af4 |
|
11-Oct-2013 |
Scott Wood <scottwood@freescale.com> |
powerpc: add barrier after writing kernel PTE There is no barrier between something like ioremap() writing to a PTE, and returning the value to a caller that may then store the pointer in a place that is visible to other CPUs. Such callers generally don't perform barriers of their own. Even if callers of ioremap() and similar things did use barriers, the most logical choise would be smp_wmb(), which is not architecturally sufficient when BookE hardware tablewalk is used. A full sync is specified by the architecture. For userspace mappings, OTOH, we generally already have an lwsync due to locking, and if we occasionally take a spurious fault due to not having a full sync with hardware tablewalk, it will not be fatal because we will retry rather than oops. Signed-off-by: Scott Wood <scottwood@freescale.com>
|
#
4f804943 |
|
14-Nov-2013 |
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> |
powerpc: handle pgtable_page_ctor() fail Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
ae3a197e |
|
28-Mar-2012 |
David Howells <dhowells@redhat.com> |
Disintegrate asm/system.h for PowerPC Disintegrate asm/system.h for PowerPC. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> cc: linuxppc-dev@lists.ozlabs.org
|
#
a2234b4b |
|
28-Feb-2012 |
Joe Perches <joe@perches.com> |
powerpc: Use vsprintf extention %pf with builtin_return_address Emit the function name not the address when possible. builtin_return_address() gives an address. When building a kernel with CONFIG_KALLSYMS, emit the actual function name not the address. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
|
#
40f1ce7f |
|
08-May-2011 |
Anton Blanchard <anton@samba.org> |
powerpc: Remove ioremap_flags We have a confusing number of ioremap functions. Make things just a bit simpler by merging ioremap_flags and ioremap_prot. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
|
#
be135f40 |
|
08-May-2011 |
Anton Blanchard <anton@samba.org> |
powerpc: Add ioremap_wc Add ioremap_wc so drivers can request write combining on kernel mappings. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
|
#
ae9fd31a |
|
08-Nov-2010 |
Jesper Juhl <jj@chaosbits.net> |
powerpc: Remove unnecessary casts of void ptr Hi, The [vk][cmz]alloc(_node) family of functions return void pointers which it's completely unnecessary/pointless to cast to other pointer types since that happens implicitly. This patch removes such casts from arch/powerpc/ Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
|
#
7a9d1256 |
|
28-Nov-2010 |
Michael Ellerman <michael@ellerman.id.au> |
powerpc: Record vma->phys_addr in ioremap() The vmalloc code can track the physical address of a vma, when the vma is used for ioremap, if set it is displayed in /proc/vmallocinfo. Because get_vm_area_caller() doesn't know it's being called for ioremap() it's up to the arch code to set the phys_addr. A bunch of other arch's do this, I'm not sure why powerpc doesn't? Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
|
#
95f72d1e |
|
11-Jul-2010 |
Yinghai Lu <yinghai@kernel.org> |
lmb: rename to memblock via following scripts FILES=$(find * -type f | grep -vE 'oprofile|[^K]config') sed -i \ -e 's/lmb/memblock/g' \ -e 's/LMB/MEMBLOCK/g' \ $FILES for N in $(find . -name lmb.[ch]); do M=$(echo $N | sed 's/lmb/memblock/g') mv $N $M done and remove some wrong change like lmbench and dlmb etc. also move memblock.c from lib/ to mm/ Suggested-by: Ingo Molnar <mingo@elte.hu> Acked-by: "H. Peter Anvin" <hpa@zytor.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
|
#
8054a342 |
|
08-Jun-2010 |
Christoph Egger <siccegge@cs.fau.de> |
powerpc: Remove dead CONFIG_HIGHPTE CONFIG_HIGHPTE doesn't exist in Kconfig, therefore removing all references for it from the source code. Signed-off-by: Christoph Egger <siccegge@cs.fau.de> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
|
#
75c1d539 |
|
27-Apr-2010 |
Benjamin Herrenschmidt <benh@kernel.crashing.org> |
powerpc: Fix CONFIG_DEBUG_PAGEALLOC on 603/e300 So we tried to speed things up a bit using flush_hash_pages() directly but that falls over on 603 of course meaning we fail to flush the TLB properly and we may even end up having it corrupt memory randomly by accessing a hash table that doesn't exist. This removes the "optimization" by always going through flush_tlb_page() for now at least. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
|
#
55052eec |
|
06-Apr-2010 |
Benjamin Herrenschmidt <benh@kernel.crashing.org> |
powerpc: Fix ioremap_flags() with book3e pte definition We can't just clear the user read permission in book3e pte, because that will also clear supervisor read permission. This surely isn't desired. Fix the problem by adding the supervisor read back. BenH: Slightly simplified the ifdef and applied to ppc64 too Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
|
#
5a0e3ad6 |
|
24-Mar-2010 |
Tejun Heo <tj@kernel.org> |
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
|
#
50891457 |
|
08-Dec-2009 |
Benjamin Herrenschmidt <benh@kernel.crashing.org> |
powerpc/mm: Fix a WARN_ON() with CONFIG_DEBUG_PAGEALLOC and CONFIG_DEBUG_VM Set need to call __set_pte_at() and not set_pte_at() from __change_page_attr() since the later will perform checks with CONFIG_DEBUG_VM that aren't suitable to the way we override an existing PTE. (More specifically, it doesn't let you write over a present PTE). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
|
#
c5df7f77 |
|
11-Dec-2009 |
Albert Herranz <albert_herranz@yahoo.es> |
powerpc: allow ioremap within reserved memory regions Add a flag to let a platform ioremap memory regions marked as reserved. This flag will be used later by the Nintendo Wii support code to allow ioremapping the I/O region sitting between MEM1 and MEM2 and marked as reserved RAM in the patch "wii: use both mem1 and mem2 as ram". This will no longer be needed when proper discontig memory support for 32-bit PowerPC is added to the kernel. Signed-off-by: Albert Herranz <albert_herranz@yahoo.es> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
|
#
de32400d |
|
11-Dec-2009 |
Albert Herranz <albert_herranz@yahoo.es> |
wii: use both mem1 and mem2 as ram The Nintendo Wii video game console has two discontiguous RAM regions: - MEM1: 24MB @ 0x00000000 - MEM2: 64MB @ 0x10000000 Unfortunately, the kernel currently does not support discontiguous RAM memory regions on 32-bit PowerPC platforms. This patch adds a series of workarounds to allow the use of the second memory region (MEM2) as RAM by the kernel. Basically, a single range of memory from the beginning of MEM1 to the end of MEM2 is reported to the kernel, and a memory reservation is created for the hole between MEM1 and MEM2. With this patch the system is able to use all the available RAM and not just ~27% of it. This will no longer be needed when proper discontig memory support for 32-bit PowerPC is added to the kernel. Signed-off-by: Albert Herranz <albert_herranz@yahoo.es> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
|
#
ea3cc330 |
|
18-Aug-2009 |
Benjamin Herrenschmidt <benh@kernel.crashing.org> |
powerpc/mm: Cleanup handling of execute permission This is an attempt at cleaning up a bit the way we handle execute permission on powerpc. _PAGE_HWEXEC is gone, _PAGE_EXEC is now only defined by CPUs that can do something with it, and the myriad of #ifdef's in the I$/D$ coherency code is reduced to 2 cases that hopefully should cover everything. The logic on BookE is a little bit different than what it was though not by much. Since now, _PAGE_EXEC will be set by the generic code for executable pages, we need to filter out if they are unclean and recover it. However, I don't expect the code to be more bloated than it already was in that area due to that change. I could boast that this brings proper enforcing of per-page execute permissions to all BookE and 40x but in fact, we've had that now for some time as a side effect of my previous rework in that area (and I didn't even know it :-) We would only enable execute permission if the page was cache clean and we would only cache clean it if we took and exec fault. Since we now enforce that the later only work if VM_EXEC is part of the VMA flags, we de-fact already enforce per-page execute permissions... Unless I missed something Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
|
#
f637a49e |
|
26-May-2009 |
Benjamin Herrenschmidt <benh@kernel.crashing.org> |
powerpc: Minor cleanups of kernel virt address space definitions Make FIXADDR_TOP a compile time constant and cleanup a couple of definitions relative to the layout of the kernel address space on ppc32. We also print out that layout at boot time for debugging purposes. This is a pre-requisite for properly fixing non-coherent DMA allocactions. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
|
#
8d1cf34e |
|
19-Mar-2009 |
Benjamin Herrenschmidt <benh@kernel.crashing.org> |
powerpc/mm: Tweak PTE bit combination definitions This patch tweaks the way some PTE bit combinations are defined, in such a way that the 32 and 64-bit variant become almost identical and that will make it easier to bring in a new common pte-* file for the new variant of the Book3-E support. The combination of bits defining access to kernel pages are now clearly separated from the combination used by userspace and the core VM. The resulting generated code should remain identical unless I made a mistake. Note: While at it, I removed a non-sensical statement related to CONFIG_KGDB in ppc_mmu_32.c which could cause kernel mappings to be user accessible when that option is enabled. Probably something that bitrot. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
|
#
1cdab55d |
|
22-Feb-2009 |
Benjamin Herrenschmidt <benh@kernel.crashing.org> |
powerpc: Wire up /proc/vmallocinfo to our ioremap() This adds the necessary bits and pieces to powerpc implementation of ioremap to benefit from caller tracking in /proc/vmallocinfo, at least for ioremap's done after mem init as the older ones aren't tracked. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
|
#
6c24b174 |
|
09-Feb-2009 |
Kumar Gala <galak@kernel.crashing.org> |
powerpc/fsl-booke: Fix mapping functions to use phys_addr_t Fixed v_mapped_by_tlbcam() and p_mapped_by_tlbcam() to use phys_addr_t instead of unsigned long. In 36-bit physical mode we really need these functions to deal with phys_addr_t when trying to match a physical address or when returning one. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
|
#
7021d86a |
|
28-Dec-2008 |
Anton Vorontsov <avorontsov@ru.mvista.com> |
powerpc/mm: Make clear_fixmap() actually work The clear_fixmap() routine issues map_page() with flags set to 0. Currently this causes a BUG_ON() inside the map_page(), as it assumes that a PTE should be clear before mapping. This patch makes the map_page() to trigger the BUG_ON() only if the flags were set. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
|
#
ca9153a3 |
|
10-Dec-2008 |
Ilya Yanok <yanok@emcraft.com> |
powerpc/44x: Support 16K/64K base page sizes on 44x This adds support for 16k and 64k page sizes on PowerPC 44x processors. The PGDIR table is much smaller than a page when using 16k or 64k pages (512 and 32 bytes respectively) so we allocate the PGDIR with kzalloc() instead of __get_free_pages(). One PTE table covers rather a large memory area when using 16k or 64k pages (32MB or 512MB respectively), so we can easily put FIXMAP and PKMAP in the area covered by one PTE table. Signed-off-by: Yuri Tikhonov <yur@emcraft.com> Signed-off-by: Vladimir Panfilov <pvr@emcraft.com> Signed-off-by: Ilya Yanok <yanok@emcraft.com> Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
|
#
ccdcef72 |
|
17-Dec-2008 |
Dale Farnsworth <dale@farnsworth.org> |
powerpc/32: Add the ability for a classic ppc kernel to be loaded at 32M Add the ability for a classic ppc kernel to be loaded at an address of 32MB. This done by fixing a few places that assume we are loaded at address 0, and by changing several uses of KERNELBASE to use PAGE_OFFSET, instead. Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
|
#
01695a96 |
|
17-Dec-2008 |
Anton Vorontsov <avorontsov@ru.mvista.com> |
powerpc/32: Allow __ioremap on RAM addresses for kdump kernel While for debugging it is good to catch bogus users of ioremap, though for kdump support it is more convenient to use __ioremap for copy_oldmem_page() (exactly as we do for PPC64 currently). Note that copy_oldmem_page() calls __ioremap with flags set to '0', so it should be safe with the regard to the caches. The other option is to use kmap_atomic_pfn()[1], but it will not work for kernels compiled without HIGHMEM. That is, on a board with 256MB RAM and crashkernel=64M@32M case, the !HIGHMEM capturing kernel maps 0-96M range, which does not include all the memory needed to capture the dump. And, obviously, accessing anything upper than 96M will cause faults. [1] http://ozlabs.org/pipermail/linuxppc-dev/2007-November/046747.html Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
|
#
f63837f0 |
|
14-Dec-2008 |
Benjamin Herrenschmidt <benh@kernel.crashing.org> |
powerpc/mm: Remove flush_HPTE() The function flush_HPTE() is used in only one place, the implementation of DEBUG_PAGEALLOC on ppc32. It's actually a dup of flush_tlb_page() though it's -slightly- more efficient on hash based processors. We remove it and replace it by a direct call to the hash flush code on those processors and to flush_tlb_page() for everybody else. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
|
#
0186f47e |
|
18-Nov-2008 |
Kumar Gala <galak@kernel.crashing.org> |
powerpc: Use RCU based pte freeing mechanism for all powerpc Refactor the RCU based pte free code that was used on ppc64 to be used on all powerpc. Additionally refactor pte_free() & pte_free_kernel() into common code between ppc32 & ppc64. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
|
#
f4f3a126 |
|
18-Nov-2008 |
Kumar Gala <galak@kernel.crashing.org> |
powerpc: hash_page_sync should only be used on SMP & STD_MMU_32 Clean up the ifdefs so we only use hash_page_sync if we have CONFIG_SMP && CONFIG_PPC_STD_MMU_32. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
|
#
4ee7084e |
|
24-Sep-2008 |
Becky Bruce <becky.bruce@freescale.com> |
POWERPC: Allow 32-bit hashed pgtable code to support 36-bit physical This rearranges a bit of code, and adds support for 36-bit physical addressing for configs that use a hashed page table. The 36b physical support is not enabled by default on any config - it must be explicitly enabled via the config system. This patch *only* expands the page table code to accomodate large physical addresses on 32-bit systems and enables the PHYS_64BIT config option for 86xx. It does *not* allow you to boot a board with more than about 3.5GB of RAM - for that, SWIOTLB support is also required (and coming soon). Signed-off-by: Becky Bruce <becky.bruce@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
|
#
a1f242ff |
|
23-Jul-2008 |
Benjamin Herrenschmidt <benh@kernel.crashing.org> |
powerpc ioremap_prot This adds ioremap_prot and pte_pgprot() so that one can extract protection bits from a PTE and use them to ioremap_prot() (in order to support ptrace of VM_IO | VM_PFNMAP as per Rik's patch). This moves a couple of flag checks around in the ioremap implementations of arch/powerpc. There's a side effect of allowing non-cacheable and non-guarded mappings on ppc32 which before would always have _PAGE_GUARDED set whenever _PAGE_NO_CACHE is. (standard ioremap will still set _PAGE_GUARDED, but ioremap_prot will be capable of setting such a non guarded mapping). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Rik van Riel <riel@redhat.com> Cc: Dave Airlie <airlied@linux.ie> Cc: Hugh Dickins <hugh@veritas.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
7c5c4325 |
|
13-Jun-2008 |
Becky Bruce <becky.bruce@freescale.com> |
powerpc: Change BAT code to use phys_addr_t Currently, the physical address is an unsigned long, but it should be phys_addr_t in set_bat, [v/p]_mapped_by_bat. Also, create a macro that can convert a large physical address into the correct format for programming the BAT registers. Signed-off-by: Becky Bruce <becky.bruce@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
|
#
46a74179 |
|
19-May-2008 |
David Gibson <david@gibson.dropbear.id.au> |
[POWERPC] Fix __set_fixmap() for STRICT_MM_TYPECHECKS __set_fixmap() in pgtable_32.c currently fails to compile if STRICT_MM_TYPECHECKS is defined. This fixes it. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
|
#
2c419bde |
|
23-Apr-2008 |
Kumar Gala <galak@kernel.crashing.org> |
[POWERPC] Port fixmap from x86 and use for kmap_atomic The fixmap code from x86 allows us to have compile time virtual addresses that we change the physical addresses of at run time. This is useful for applications like kmap_atomic, PCI config that is done via direct memory map, kexec/kdump. We got ride of CONFIG_HIGHMEM_START as we can now determine a more optimal location for PKMAP_BASE based on where the fixmap addresses start and working back from there. Additionally, the kmap code in asm-powerpc/highmem.h always had debug enabled. Moved to using CONFIG_DEBUG_HIGHMEM to determine if we should have the extra debug checking. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
|
#
99c62dd7 |
|
15-Apr-2008 |
Kumar Gala <galak@kernel.crashing.org> |
[POWERPC] Remove and replace uses of PPC_MEMSTART with memstart_addr A number of users of PPC_MEMSTART (40x, ppc_mmu_32) can just always use 0 as we don't support booting these kernels at non-zero physical addresses since their exception vectors must be at 0 (or 0xfffx_xxxx). For the sub-arches that support relocatable interrupt vectors (book-e), it's reasonable to have memory start at a non-zero physical address. For those cases use the variable memstart_addr instead of the #define PPC_MEMSTART since the only uses of PPC_MEMSTART are for initialization and in the future we can set memstart_addr at runtime to have a relocatable kernel. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
|
#
2f569afd |
|
08-Feb-2008 |
Martin Schwidefsky <schwidefsky@de.ibm.com> |
CONFIG_HIGHPTE vs. sub-page page tables. Background: I've implemented 1K/2K page tables for s390. These sub-page page tables are required to properly support the s390 virtualization instruction with KVM. The SIE instruction requires that the page tables have 256 page table entries (pte) followed by 256 page status table entries (pgste). The pgstes are only required if the process is using the SIE instruction. The pgstes are updated by the hardware and by the hypervisor for a number of reasons, one of them is dirty and reference bit tracking. To avoid wasting memory the standard pte table allocation should return 1K/2K (31/64 bit) and 2K/4K if the process is using SIE. Problem: Page size on s390 is 4K, page table size is 1K or 2K. That means the s390 version for pte_alloc_one cannot return a pointer to a struct page. Trouble is that with the CONFIG_HIGHPTE feature on x86 pte_alloc_one cannot return a pointer to a pte either, since that would require more than 32 bit for the return value of pte_alloc_one (and the pte * would not be accessible since its not kmapped). Solution: The only solution I found to this dilemma is a new typedef: a pgtable_t. For s390 pgtable_t will be a (pte *) - to be introduced with a later patch. For everybody else it will be a (struct page *). The additional problem with the initialization of the ptl lock and the NR_PAGETABLE accounting is solved with a constructor pgtable_page_ctor and a destructor pgtable_page_dtor. The page table allocation and free functions need to call these two whenever a page table page is allocated or freed. pmd_populate will get a pgtable_t instead of a struct page pointer. To get the pgtable_t back from a pmd entry that has been installed with pmd_populate a new function pmd_pgtable is added. It replaces the pmd_page call in free_pte_range and apply_to_pte_range. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
5e541973 |
|
04-Feb-2008 |
Benjamin Herrenschmidt <benh@kernel.crashing.org> |
add mm argument to pte/pmd/pud/pgd_free (with Martin Schwidefsky <schwidefsky@de.ibm.com>) The pgd/pud/pmd/pte page table allocation functions get a mm_struct pointer as first argument. The free functions do not get the mm_struct argument. This is 1) asymmetrical and 2) to do mm related page table allocations the mm argument is needed on the free function as well. [kamalesh@linux.vnet.ibm.com: i386 fix] [akpm@linux-foundation.org: coding-syle fixes] Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
#
c0770f68 |
|
12-Jun-2007 |
David Gibson <david@gibson.dropbear.id.au> |
[POWERPC] Remove a couple of unused definitions from pgtable_32.c In arch/powerpc/mm/pgtable_32.c, the variable io_bat_index and the macro is_power_of_4() no longer have any users. This removes them. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
|
#
f21f49ea |
|
12-Jun-2007 |
David Gibson <david@gibson.dropbear.id.au> |
[POWERPC] Remove the dregs of APUS support from arch/powerpc APUS (the Amiga Power-Up System) is not supported under arch/powerpc and it's unlikely it ever will be. Therefore, this patch removes the fragments of APUS support code from arch/powerpc which have been copied from arch/ppc. A few APUS references are left in asm-powerpc in .h files which are still used from arch/ppc. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
|
#
90ac19a8 |
|
12-Jun-2007 |
David Gibson <david@gibson.dropbear.id.au> |
[POWERPC] Abolish iopa(), mm_ptov(), io_block_mapping() from arch/powerpc These old-fashioned IO mapping functions no longer have any callers in code which remains relevant on arch/powerpc. Therefore, this removes them from arch/powerpc. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
|
#
f1aed924 |
|
23-May-2007 |
Kumar Gala <galak@kernel.crashing.org> |
[POWERPC] Fix modpost warning Mark pte_alloc_one_kernel as __init_refok to fix the following warning: WARNING: arch/powerpc/mm/built-in.o(.text+0x1068): Section mismatch: reference to .init.text:early_get_page (between 'pte_alloc_one_kernel' and 'steal_context') Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
|
#
d1953c88 |
|
07-May-2007 |
David Gibson <david@gibson.dropbear.id.au> |
[POWERPC] Remove use of 4level-fixup.h for ppc32 For 32-bit systems, powerpc still relies on the 4level-fixup.h hack, to pretend that the generic pagetable handling stuff is 3-levels rather than 4. This patch removes this, instead using the newer pgtable-nopmd.h to handle the elision of both the pud and pmd pagetable levels (ppc32 pagetables are actually 2 levels). This removes a little extraneous code, and makes it more easily compared to the 64-bit pagetable code. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
|
#
37f01d64 |
|
23-Apr-2007 |
David Gibson <david@gibson.dropbear.id.au> |
[POWERPC] Abolish PHYS_FMT macro from arch/powerpc 32-bit powerpc systems define a macro, PHYS_FMT, giving a printf format string fragment for displaying physical addresses, since most 32-bit powerpc platforms use 32-bit physical addresses but a few use 64-bit physical addresses. This macro is used in exactly one place, a rare error message, where we can solve the problem more simply by just unconditionally casting the address up to 64-bit quantity before formatting it. This patch does so, meaning that as we bring MMU definitions from asm-ppc over to asm-powerpc, cleaning them up in the process, we don't need to implement this ugly macro (which additionally has a very bad name for something global). Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
|
#
88df6e90 |
|
11-Apr-2007 |
Benjamin Herrenschmidt <benh@kernel.crashing.org> |
[POWERPC] DEBUG_PAGEALLOC for 32-bit Here's an implementation of DEBUG_PAGEALLOC for ppc32. It disables BAT mapping and is only tested with Hash table based processor though it shouldn't be too hard to adapt it to others. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> arch/powerpc/Kconfig.debug | 9 ++++++ arch/powerpc/mm/init_32.c | 4 +++ arch/powerpc/mm/pgtable_32.c | 52 +++++++++++++++++++++++++++++++++++++++ arch/powerpc/mm/ppc_mmu_32.c | 4 ++- include/asm-powerpc/cacheflush.h | 6 ++++ 5 files changed, 74 insertions(+), 1 deletion(-) Signed-off-by: Paul Mackerras <paulus@samba.org>
|
#
ee4f2ea4 |
|
11-Apr-2007 |
Benjamin Herrenschmidt <benh@kernel.crashing.org> |
[POWERPC] Fix 32-bit mm operations when not using BATs On hash table based 32 bits powerpc's, the hash management code runs with a big spinlock. It's thus important that it never causes itself a hash fault. That code is generally safe (it does memory accesses in real mode among other things) with the exception of the actual access to the code itself. That is, the kernel text needs to be accessible without taking a hash miss exceptions. This is currently guaranteed by having a BAT register mapping part of the linear mapping permanently, which includes the kernel text. But this is not true if using the "nobats" kernel command line option (which can be useful for debugging) and will not be true when using DEBUG_PAGEALLOC implemented in a subsequent patch. This patch fixes this by pre-faulting in the hash table pages that hit the kernel text, and making sure we never evict such a page under hash pressure. Signed-off-by: Benjamin Herrenchmidt <benh@kernel.crashing.org> arch/powerpc/mm/hash_low_32.S | 22 ++++++++++++++++++++-- arch/powerpc/mm/mem.c | 3 --- arch/powerpc/mm/mmu_decl.h | 4 ++++ arch/powerpc/mm/pgtable_32.c | 11 +++++++---- 4 files changed, 31 insertions(+), 9 deletions(-) Signed-off-by: Paul Mackerras <paulus@samba.org>
|
#
3be4e699 |
|
11-Apr-2007 |
Benjamin Herrenschmidt <benh@kernel.crashing.org> |
[POWERPC] Cleanup 32-bit map_page The 32 bits map_page() function is used internally by the mm code for early mmu mappings and for ioremap. It should never be called for an address that already has a valid PTE or hash entry, so we add a BUG_ON for that and remove the useless flush_HPTE call. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> arch/powerpc/mm/pgtable_32.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) Signed-off-by: Paul Mackerras <paulus@samba.org>
|
#
8dabba5d |
|
09-Feb-2007 |
Kumar Gala <galak@kernel.crashing.org> |
[POWERPC] Fix is_power_of_4(x) compile error When building an 85xx kernel we get: CC arch/powerpc/mm/pgtable_32.o arch/powerpc/mm/pgtable_32.c: In function 'io_block_mapping': arch/powerpc/mm/pgtable_32.c:330: error: expected identifier before '(' token arch/powerpc/mm/pgtable_32.c:330: error: expected statement before ')' token The is_power_of_2(x) fixup patch left an extra ')' on the is_power_of_4 macro. There is a similiar issue on the arch/ppc side. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
|
#
63c2f782 |
|
30-Jan-2007 |
Robert P. J. Day <rpjday@mindspring.com> |
[POWERPC] Add "is_power_of_2" checking to log2.h. Add the inline function "is_power_of_2()" to log2.h, where the value zero is *not* considered to be a power of two. Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Acked-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
|
#
68a64357 |
|
12-Nov-2006 |
Benjamin Herrenschmidt <benh@kernel.crashing.org> |
[POWERPC] Merge 32 and 64 bits asm-powerpc/io.h powerpc: Merge 32 and 64 bits asm-powerpc/io.h The rework on io.h done for the new hookable accessors made it easier, so I just finished the work and merged 32 and 64 bits io.h for arch/powerpc. arch/ppc still uses the old version in asm-ppc, there is just too much gunk in there that I really can't be bothered trying to cleanup. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
|
#
3d1ea8e8 |
|
10-Nov-2006 |
Benjamin Herrenschmidt <benh@kernel.crashing.org> |
[POWERPC] Remove ioremap64 and fixup_bigphys_addr In order to suppose platforms with devices above 4Gb on 32 bits platforms with a >32 bits physical address space, we used to have a special ioremap64 along with a fixup routine fixup_bigphys_addr. This shouldn't be necessary anymore as struct resource now supports 64 bits addresses even on 32 bits archs. This patch enables that option when CONFIG_PHYS_64BIT is set and removes ioremap64 and fixup_bigphys_addr. This is a preliminary work for the upcoming merge of 32 and 64 bits io.h Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
|
#
6ab3d562 |
|
30-Jun-2006 |
Jörn Engel <joern@wohnheim.fh-wedel.de> |
Remove obsolete #include <linux/config.h> Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
|
#
bab70a4a |
|
28-Mar-2006 |
Eugene Surovegin <ebs@ebshome.net> |
[PATCH] lock PTE before updating it in 440/BookE page fault handler Fix 44x and BookE page fault handler to correctly lock PTE before trying to pte_update() it, otherwise this PTE might be swapped out after pte_present() check but before pte_uptdate() call, resulting in corrupted PTE. This can happen with enabled preemption and low memory condition. Signed-off-by: Eugene Surovegin <ebs@ebshome.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
|
#
920573bd |
|
14-Mar-2006 |
Olaf Hering <olh@suse.de> |
[PATCH] powerpc: remove duplicate EXPORT_SYMBOLS remove warnings when building a 64bit kernel. smp_call_function triggers also with 32bit kernel. WARNING: vmlinux: duplicate symbol 'smp_call_function' previous definition was in vmlinux arch/powerpc/kernel/ppc_ksyms.c:164:EXPORT_SYMBOL(smp_call_function); arch/powerpc/kernel/smp.c:300:EXPORT_SYMBOL(smp_call_function); WARNING: vmlinux: duplicate symbol 'ioremap' previous definition was in vmlinux arch/powerpc/kernel/ppc_ksyms.c:113:EXPORT_SYMBOL(ioremap); arch/powerpc/mm/pgtable_64.c:321:EXPORT_SYMBOL(ioremap); WARNING: vmlinux: duplicate symbol '__ioremap' previous definition was in vmlinux arch/powerpc/kernel/ppc_ksyms.c:117:EXPORT_SYMBOL(__ioremap); arch/powerpc/mm/pgtable_64.c:322:EXPORT_SYMBOL(__ioremap); WARNING: vmlinux: duplicate symbol 'iounmap' previous definition was in vmlinux arch/powerpc/kernel/ppc_ksyms.c:118:EXPORT_SYMBOL(iounmap); arch/powerpc/mm/pgtable_64.c:323:EXPORT_SYMBOL(iounmap); Signed-off-by: Olaf Hering <olh@suse.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
|
#
e2f2e58e |
|
30-Oct-2005 |
Paul Mackerras <paulus@samba.org> |
powerpc: import a fix from arch/ppc/mm/pgtable.c ... namely, the change to the 2-argument pte_alloc_kernel. Signed-off-by: Paul Mackerras <paulus@samba.org>
|
#
3ee1fcac |
|
29-Oct-2005 |
Paul Mackerras <paulus@samba.org> |
powerpc: import a gfp_t fix to arch/powerpc/mm/pgtable_32.c This applies the same fix as Al Viro recently made to arch/ppc/mm/pgtable.c. Signed-off-by: Paul Mackerras <paulus@samba.org>
|
#
70d64cea |
|
10-Oct-2005 |
Paul Mackerras <paulus@samba.org> |
powerpc: Rename files to have consistent _32/_64 suffixes This doesn't change any code, just renames things so we consistently have foo_32.c and foo_64.c where we have separate 32- and 64-bit versions. Signed-off-by: Paul Mackerras <paulus@samba.org>
|