powerpc/64: Set task pt_regs->link to the LR value on scv entry

Nysal reported that userspace backtraces are missing in offcputime bcc
tool. As an example:
$ sudo ./bcc/tools/offcputime.py -uU
Tracing off-CPU time (us) of user threads by user stack... Hit Ctrl-C to end.

^C
write
- python (9107)
8

write
- sudo (9105)
9

mmap
- python (9107)
16

clock_nanosleep
- multipathd (697)
3001604

The offcputime bcc tool attaches a bpf program to a kprobe on
finish_task_switch(), which is usually hit on a syscall from userspace.
With the switch to system call vectored, we started setting
pt_regs->link to zero. This is because system call vectored behaves like
a function call with LR pointing to the system call return address, and
with no modification to SRR0/SRR1. The LR value does indicate our next
instruction, so it is being saved as pt_regs->nip, and pt_regs->link is
being set to zero. This is not a problem by itself, but BPF uses perf
callchain infrastructure for capturing stack traces, and that stores LR
as the second entry in the stack trace. perf has code to cope with the
second entry being zero, and skips over it. However, generic userspace
unwinders assume that a zero entry indicates end of the stack trace,
resulting in a truncated userspace stack trace.

Rather than fixing all userspace unwinders to ignore/skip past the
second entry, store the real LR value in pt_regs->link so that there
continues to be a valid, though duplicate entry in the stack trace.

With this change:
$ sudo ./bcc/tools/offcputime.py -uU
Tracing off-CPU time (us) of user threads by user stack... Hit Ctrl-C to end.

^C
write
write
[unknown]
[unknown]
[unknown]
[unknown]
[unknown]
PyObject_VectorcallMethod
[unknown]
[unknown]
PyObject_CallOneArg
PyFile_WriteObject
PyFile_WriteString
[unknown]
[unknown]
PyObject_Vectorcall
_PyEval_EvalFrameDefault
PyEval_EvalCode
[unknown]
[unknown]
[unknown]
_PyRun_SimpleFileObject
_PyRun_AnyFileObject
Py_RunMain
[unknown]
Py_BytesMain
[unknown]
__libc_start_main
- python (1293)
7

write
write
[unknown]
sudo_ev_loop_v1
sudo_ev_dispatch_v1
[unknown]
[unknown]
[unknown]
[unknown]
__libc_start_main
- sudo (1291)
7

syscall
syscall
bpf_open_perf_buffer_opts
[unknown]
[unknown]
[unknown]
[unknown]
_PyObject_MakeTpCall
PyObject_Vectorcall
_PyEval_EvalFrameDefault
PyEval_EvalCode
[unknown]
[unknown]
[unknown]
_PyRun_SimpleFileObject
_PyRun_AnyFileObject
Py_RunMain
[unknown]
Py_BytesMain
[unknown]
__libc_start_main
- python (1293)
11

clock_nanosleep
clock_nanosleep
nanosleep
sleep
[unknown]
[unknown]
__clone
- multipathd (698)
3001661

Fixes: 7fa95f9adaee ("powerpc/64s: system call support for scv/rfscv instructions")
Cc: stable@vger.kernel.org
Reported-by: "Nysal Jan K.A" <nysal@linux.ibm.com>
Signed-off-by: Naveen N Rao <naveen@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240202154316.395276-1-naveen@kernel.org

powerpc: Fix merge conflict between pcrel and copy_thread changes

Fix a conflict between commit 4e991e3c16a35 ("powerpc: add CFUNC
assembly label annotation") and commit b504b6aade040 ("powerpc:
differentiate kthread from user kernel thread start").

Fixes: 4e991e3c16a35 ("powerpc: add CFUNC assembly label annotation")
Fixes: b504b6aade040 ("powerpc: differentiate kthread from user kernel thread start")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230426055848.402993-2-npiggin@gmail.com

powerpc: add CFUNC assembly label annotation

This macro is to be used in assembly where C functions are called.
pcrel addressing mode requires branches to functions with a
localentry value of 1 to have either a trailing nop or @notoc.
This macro permits the latter without changing callers.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Add dummy definitions to fix selftests build]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230408021752.862660-5-npiggin@gmail.com

powerpc: copy_thread don't set _TIF_RESTOREALL

In the kernel user thread path, don't set _TIF_RESTOREALL because
the thread is required to call kernel_execve() before it returns,
which will set _TIF_RESTOREALL if necessary via start_thread().

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230325122904.2375060-8-npiggin@gmail.com

powerpc: differentiate kthread from user kernel thread start

Kernel created user threads start similarly to kernel threads in that
they call a kernel function after first returning from _switch, so
they share ret_from_kernel_thread for this. Kernel threads never return
from that function though, whereas user threads often do (although some
don't, e.g., IO threads).

Split these startup functions in two, and catch kernel threads that
improperly return from their function. This is intended to make the
complicated code a little bit easier to understand.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230325122904.2375060-7-npiggin@gmail.com

powerpc/64: ret_from_fork avoid restoring regs twice

If the system call return path always restores NVGPRs then there is no
need for ret_from_fork to do it. The HANDLER_RESTORE_NVGPRS does the
right thing for this.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230325122904.2375060-5-npiggin@gmail.com

powerpc: use switch frame for ret_from_kernel_thread parameters

The kernel thread path in copy_thread creates a user interrupt frame on
stack and stores the function and arg parameters there, and
ret_from_kernel_thread loads them. This is a slightly confusing way to
overload that frame. Non-volatile registers are loaded from the switch
frame, so the parameters can be stored there. The user interrupt frame
is now only used by user threads when they return to user.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230325122904.2375060-4-npiggin@gmail.com

powerpc/64s: Zeroise gprs on interrupt routine entry on Book3S

Zeroise user state in gprs (assign to zero) to reduce the influence of user
registers on speculation within kernel syscall handlers. Clears occur
at the very beginning of the sc and scv 0 interrupt handlers, with
restores occurring following the execution of the syscall handler.

Zeroise GPRS r0, r2-r11, r14-r31, on entry into the kernel for all
other interrupt sources. The remaining gprs are overwritten by
entry macros to interrupt handlers, irrespective of whether or not a
given handler consumes these register values. If an interrupt does not
select the IMSR_R12 IOption, zeroise r12.

Prior to this commit, r14-r31 are restored on a per-interrupt basis at
exit, but now they are always restored on 64bit Book3S. Remove explicit
REST_NVGPRS invocations on 64-bit Book3S. 32-bit systems do not clear
user registers on interrupt, and continue to depend on the return value
of interrupt_exit_user_prepare to determine whether or not to restore
non-volatiles.

The mmap_bench benchmark in selftests should rapidly invoke pagefaults.
See ~0.8% performance regression with this mitigation, but this
indicates the worst-case performance due to heavier-weight interrupt
handlers. This mitigation is able to be enabled/disabled through
CONFIG_INTERRUPT_SANITIZE_REGISTERS.

Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Rohan McLure <rmclure@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221201071019.1953023-5-rmclure@linux.ibm.com

powerpc/64: Sanitise common exit code for interrupts

Interrupt code is shared between Book3E/S 64-bit systems for interrupt
handlers. Ensure that exit code correctly restores non-volatile gprs on
each system when CONFIG_INTERRUPT_SANITIZE_REGISTERS is enabled.

Also introduce macros for clearing/restoring registers on interrupt
entry for when this configuration option is either disabled or enabled.

Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Rohan McLure <rmclure@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221201071019.1953023-3-rmclure@linux.ibm.com

powerpc: add a definition for the marker offset within the interrupt frame

Define a constant rather than open-code the offset for the
"regs" marker.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221127124942.1665522-9-npiggin@gmail.com

powerpc: add definition for pt_regs offset within an interrupt frame

This is a common offset that currently uses the overloaded
STACK_FRAME_OVERHEAD constant. It's easier to read and more
flexible to use a specific regs offset for this.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221127124942.1665522-8-npiggin@gmail.com

powerpc/64s/interrupt: Fix clear of PACA_IRQS_HARD_DIS when returning to soft-masked context

Commit a4cb3651a1743 ("powerpc/64s/interrupt: Fix lost interrupts when
returning to soft-masked context") fixed the problem of pending irqs
being cleared when clearing the HARD_DIS bit, but then it didn't clear
the bit at all. This change clears HARD_DIS without affecting other bits
in the mask.

When an interrupt hits in a soft-masked section that has MSR[EE]=1, it
can hard disable and set PACA_IRQS_HARD_DIS, which must be cleared when
returning to the EE=1 caller (unless it was set due to a MUST_HARD_MASK
interrupt becoming pending). Failure to clear this leaves the
returned-to context running with MSR[EE]=1 and PACA_IRQS_HARD_DIS, which
confuses irq assertions and could be dangerous for code that might test
the flag.

This was observed in a hash MMU kernel where a kernel hash fault hits in
a local_irqs_disabled region that has EE=1. The hash fault also runs
with EE=1, then as it returns, a decrementer hits in the restart section
and the irq restart code hard-masks which sets the PACA_IRQ_HARD_DIS
flag, which is not clear when the original context is returned to.

Reported-by: Sachin Sant <sachinp@linux.ibm.com>
Fixes: a4cb3651a1743 ("powerpc/64s/interrupt: Fix lost interrupts when returning to soft-masked context")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221022052207.471328-1-npiggin@gmail.com

powerpc/64s/interrupt: Fix lost interrupts when returning to soft-masked context

It's possible for an interrupt returning to an irqs-disabled context to
lose a pending soft-masked irq because it branches to part of the exit
code for irqs-enabled contexts, which is meant to clear only the
PACA_IRQS_HARD_DIS flag from PACAIRQHAPPENED by zeroing the byte. This
just looks like a simple thinko from a recent commit (if there was no
hard mask pending, there would be no reason to clear it anyway).

This also adds comment to the code that actually does need to clear the
flag.

Fixes: e485f6c751e0a ("powerpc/64/interrupt: Fix return to masked context after hard-mask irq becomes pending")
Reported-by: Sachin Sant <sachinp@linux.ibm.com>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221013064418.1311104-1-npiggin@gmail.com

powerpc/64: provide a helper macro to load r2 with the kernel TOC

A later change stops the kernel using r2 and loads it with a poison
value. Provide a PACATOC loading abstraction which can hide this
detail.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220926034057.2360083-5-npiggin@gmail.com

powerpc/64: use 32-bit immediate for STACK_FRAME_REGS_MARKER

Using a 32-bit constant for this marker allows it to be loaded with
two ALU instructions, like 32-bit. This avoids a TOC entry and a
TOC load that depends on the r2 value that has just been loaded from
the PACA.

This changes the value for 32-bit as well, so both have the same
value in the low 4 bytes and 64-bit has 0 in the top bytes.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220926034057.2360083-2-npiggin@gmail.com

powerpc/64/interrupt: Fix return to masked context after hard-mask irq becomes pending

If a synchronous interrupt (e.g., hash fault) is taken inside an
irqs-disabled region which has MSR[EE]=1, then an asynchronous interrupt
that is PACA_IRQ_MUST_HARD_MASK (e.g., PMI) is taken inside the
synchronous interrupt handler, then the synchronous interrupt will
return with MSR[EE]=1 and the asynchronous interrupt fires again.

If the asynchronous interrupt is a PMI and the original context does not
have PMIs disabled (only Linux IRQs), the asynchronous interrupt will
fire despite having the PMI marked soft pending. This can confuse the
perf code and cause warnings.

This patch changes the interrupt return so that irqs-disabled MSR[EE]=1
contexts will be returned to with MSR[EE]=0 if a PACA_IRQ_MUST_HARD_MASK
interrupt has become pending in the meantime.

The longer explanation for what happens:
1. local_irq_disable()
2. Hash fault interrupt fires, do_hash_fault handler runs
3. interrupt_enter_prepare() sets IRQS_ALL_DISABLED
4. interrupt_enter_prepare() sets MSR[EE]=1
5. PMU interrupt fires, masked handler runs
6. Masked handler marks PMI pending
7. Masked handler returns with PACA_IRQ_HARD_DIS set, MSR[EE]=0
8. do_hash_fault interrupt return handler runs
9. interrupt_exit_kernel_prepare() clears PACA_IRQ_HARD_DIS
10. interrupt returns with MSR[EE]=1
11. PMU interrupt fires, perf handler runs

Fixes: 4423eb5ae32e ("powerpc/64/interrupt: make normal synchronous interrupts enable MSR[EE] if possible")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220926054305.2671436-4-npiggin@gmail.com

powerpc: Change system_call_exception calling convention

Change system_call_exception arguments to pass a pointer to a stack
frame container caller state, as well as the original r0, which
determines the number of the syscall. This has been observed to yield
improved performance to passing them by registers, circumventing the
need to allocate a stack frame.

Signed-off-by: Rohan McLure <rmclure@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Retain clearing of high bits of args for compat tasks]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220921065605.1051927-21-rmclure@linux.ibm.com

powerpc/64s: Use {ZEROIZE,SAVE,REST}_GPRS macros in sc, scv 0 handlers

Use the convenience macros for saving/clearing/restoring gprs in keeping
with syscall calling conventions. The plural variants of these macros
can store a range of registers for concision.

This works well when the user gpr value we are hoping to save is still
live. In the syscall interrupt handlers, user register state is
sometimes juggled between registers. Hold-off from issuing the SAVE_GPR
macro for applicable neighbouring lines to highlight the delicate
register save logic.

Signed-off-by: Rohan McLure <rmclure@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220921065605.1051927-5-rmclure@linux.ibm.com

powerpc: Save caller r3 prior to system_call_exception

This reverts commit 8875f47b7681 ("powerpc/syscall: Save r3 in regs->orig_r3
").

Save caller's original r3 state to the kernel stackframe before entering
system_call_exception. This allows for user registers to be cleared by
the time system_call_exception is entered, reducing the influence of
user registers on speculation within the kernel.

Prior to this commit, orig_r3 was saved at the beginning of
system_call_exception. Instead, save orig_r3 while the user value is
still live in r3.

Also replicate this early save in 32-bit. A similar save was removed in
commit 6f76a01173cc ("powerpc/syscall: implement system call entry/exit
logic in C for PPC32") when 32-bit adopted system_call_exception. Revert
its removal of orig_r3 saves.

Signed-off-by: Rohan McLure <rmclure@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220921065605.1051927-3-rmclure@linux.ibm.com

powerpc: Remove CONFIG_PPC_FSL_BOOK3E

CONFIG_PPC_FSL_BOOK3E is redundant with CONFIG_PPC_E500.

Remove it.

And rename five files accordingly.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Rename include guards to match new file names]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/795cb93b88c9a0279289712e674f39e3b108a1b4.1663606876.git.christophe.leroy@csgroup.eu

powerpc/64: Remove unused SYS_CALL_TABLE symbol

In interrupt_64.S, formerly entry_64.S, there are two toc entries
created for sys_call_table and compat_sys_call_table.

These are no longer used, since the system call entry was converted from
asm to C, so remove them.

Fixes: 68b34588e202 ("powerpc/64/sycall: Implement syscall entry/exit logic in C")
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220913124545.2817825-1-mpe@ellerman.id.au

powerpc: Replace PPC64_ELF_ABI_v{1/2} by CONFIG_PPC64_ELF_ABI_V{1/2}

Replace all uses of PPC64_ELF_ABI_v1 and PPC64_ELF_ABI_v2 by
resp CONFIG_PPC64_ELF_ABI_V1 and CONFIG_PPC64_ELF_ABI_V2.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/ba13d59e8c50bc9aa6328f1c7f0c0d0278e0a3a7.1652074503.git.christophe.leroy@csgroup.eu

powerpc/64: remove system call instruction emulation

emulate_step() instruction emulation including sc instruction emulation
initially appeared in xmon. It was then moved into sstep.c where kprobes
could use it too, and later hw_breakpoint and uprobes started to use it.

Until uprobes, the only instruction emulation users were for kernel
mode instructions.

- xmon only steps / breaks on kernel addresses.
- kprobes is kernel only.
- hw_breakpoint only emulates kernel instructions, single steps user.

At one point, there was support for the kernel to execute sc
instructions, although that is long removed and it's not clear whether
there were any in-tree users. So system call emulation is not required
by the above users.

uprobes uses emulate_step and it appears possible to emulate sc
instruction in userspace. Userspace system call emulation is broken and
it's not clear it ever worked well.

The big complication is that userspace takes an interrupt to the kernel
to emulate the instruction. The user->kernel interrupt sets up registers
and interrupt stack frame expecting to return to userspace, then system
call instruction emulation re-directs that stack frame to the kernel,
early in the system call interrupt handler. This means the interrupt
return code takes the kernel->kernel restore path, which does not
restore everything as the system call interrupt handler would expect
coming from userspace. regs->iamr appears to get lost for example,
because the kernel->kernel return does not restore the user iamr.
Accounting such as irqflags tracing and CPU accounting does not get
flipped back to user mode as the system call handler expects, so those
appear to enter the kernel twice without returning to userspace.

These things may be individually fixable with various complication, but
it is a big complexity for unclear real benefit.

Furthermore, it is not possible to single step a system call instruction
since it causes an interrupt. As such, a separate patch disables probing
on system call instructions.

This patch removes system call emulation and disables stepping system
calls.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[minor commit log edit, and also get rid of '#ifdef CONFIG_PPC64']
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/a412e3b3791ed83de18704c8d90f492e7a0049c0.1648648712.git.naveen.n.rao@linux.vnet.ibm.com

powerpc/64s: Mask SRR0 before checking against the masked NIP

Commit 314f6c23dd8d ("powerpc/64s: Mask NIP before checking against
SRR0") masked off the low 2 bits of the NIP value in the interrupt
stack frame in case they are non-zero and mis-compare against a SRR0
register value of a CPU which always reads back 0 from the 2 low bits
which are reserved.

This now causes the opposite problem that an implementation which does
implement those bits in SRR0 will mis-compare against the masked NIP
value in which they have been cleared. QEMU is one such implementation,
and this is allowed by the architecture.

This can be triggered by sigfuz by setting low bits of PT_NIP in the
signal context.

Fix this for now by masking the SRR0 bits as well. Cleaner is probably
to sanitise these values before putting them in registers or stack, but
this is the quick and backportable fix.

Fixes: 314f6c23dd8d ("powerpc/64s: Mask NIP before checking against SRR0")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220117134403.2995059-1-npiggin@gmail.com

powerpc/64s: Use EMIT_WARN_ENTRY for SRR debug warnings

When CONFIG_PPC_RFI_SRR_DEBUG=y we check the SRR values before returning
from interrupts. This is done in asm using EMIT_BUG_ENTRY, and passing
BUGFLAG_WARNING.

However that fails to create an exception table entry for the warning,
and so do_program_check() fails the exception table search and proceeds
to call _exception(), resulting in an oops like:

Oops: Exception in kernel mode, sig: 5 [#1]
LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries
Modules linked in:
CPU: 2 PID: 1204 Comm: sigreturn_unali Tainted: P 5.16.0-rc2-00194-g91ca3d4f77c5 #12
NIP: c00000000000c5b0 LR: 0000000000000000 CTR: 0000000000000000
...
NIP [c00000000000c5b0] system_call_common+0x150/0x268
LR [0000000000000000] 0x0
Call Trace:
[c00000000db73e10] [c00000000000c558] system_call_common+0xf8/0x268 (unreliable)
...
Instruction dump:
7cc803a6 888d0931 2c240000 4082001c 38800000 988d0931 e8810170 e8a10178
7c9a03a6 7cbb03a6 7d7a02a6 e9810170 <7f0b6088> 7d7b02a6 e9810178 7f0b6088

We should instead use EMIT_WARN_ENTRY, which creates an exception table
entry for the warning, allowing the warning to be correctly recognised,
and the code to resume after printing the warning.

Note however that because this warning is buried deep in the interrupt
return path, we are not able to recover from it (due to MSR_RI being
clear), so we still end up in die() with an unrecoverable exception.

Fixes: 59dc5bfca0cb ("powerpc/64s: avoid reloading (H)SRR registers if they are still valid")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211221135101.2085547-2-mpe@ellerman.id.au

powerpc/64s: Mask NIP before checking against SRR0

When CONFIG_PPC_RFI_SRR_DEBUG=y we check that NIP and SRR0 match when
returning from interrupts. This can trigger falsely if NIP has either of
its two low bits set via sigreturn or ptrace, while SRR0 has its low two
bits masked in hardware.

As a quick fix make sure to mask the low bits before doing the check.

Fixes: 59dc5bfca0cb ("powerpc/64s: avoid reloading (H)SRR registers if they are still valid")
Reported-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Tested-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Link: https://lore.kernel.org/r/20211221135101.2085547-1-mpe@ellerman.id.au

powerpc/64/asm: Do not reassign labels

The LLVM integrated assembler really does not like us reassigning things
to the same label:

<instantiation>:7:9: error: invalid reassignment of non-absolute variable 'fs_label'

This happens across a bunch of platforms:
https://github.com/ClangBuiltLinux/linux/issues/1043
https://github.com/ClangBuiltLinux/linux/issues/1008
https://github.com/ClangBuiltLinux/linux/issues/920
https://github.com/ClangBuiltLinux/linux/issues/1050

There is no hope of getting this fixed in LLVM (see
https://github.com/ClangBuiltLinux/linux/issues/1043#issuecomment-641571200
and https://bugs.llvm.org/show_bug.cgi?id=47798#c1 )
so if we want to build with LLVM_IAS, we need to hack
around it ourselves.

For us the big problem comes from this:

\#define USE_FIXED_SECTION(sname) \
fs_label = start_##sname; \
fs_start = sname##_start; \
use_ftsec sname;

\#define USE_TEXT_SECTION()
fs_label = start_text; \
fs_start = text_start; \
.text

and in particular fs_label.

This works around it by not setting those 'variables' and requiring
that users of the variables instead track for themselves what section
they are in. This isn't amazing, by any stretch, but it gets us further
in the compilation.

Note that even though users have to keep track of the section, using
a wrong one produces an error with both binutils and llvm which prevents
from using wrong section at the compile time:

llvm error example:

AS arch/powerpc/kernel/head_64.o
<unknown>:0: error: Cannot represent a difference across sections
make[3]: *** [/home/aik/p/kernels-llvm/llvm/scripts/Makefile.build:388: arch/powerpc/kernel/head_64.o] Error 1

binutils error example:

/home/aik/p/kernels-llvm/llvm/arch/powerpc/kernel/exceptions-64s.S: Assembler messages:
/home/aik/p/kernels-llvm/llvm/arch/powerpc/kernel/exceptions-64s.S:1974: Error: can't resolve `system_call_common' {.text section} - `start_r
eal_vectors' {.head.text.real_vectors section}
make[3]: *** [/home/aik/p/kernels-llvm/llvm/scripts/Makefile.build:388: arch/powerpc/kernel/head_64.o] Error 1

Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211221055904.555763-5-aik@ozlabs.ru

powerpc: flexible GPR range save/restore macros

Introduce macros that operate on a (start, end) range of GPRs, which
reduces lines of code and need to do mental arithmetic while reading the
code.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211022061322.2671178-1-npiggin@gmail.com

powerpc/64s: system call scv tabort fix for corrupt irq soft-mask state

If a system call is made with a transaction active, the kernel
immediately aborts it and returns. scv system calls disable irqs even
earlier in their interrupt handler, and tabort_syscall does not fix this
up.

This can result in irq soft-mask state being messed up on the next
kernel entry, and crashing at BUG_ON(arch_irq_disabled_regs(regs)) in
the kernel exit handlers, or possibly worse.

This can't easily be fixed in asm because at this point an async irq may
have hit, which is soft-masked and marked pending. The pending interrupt
has to be replayed before returning to userspace. The fix is to move the
tabort_syscall code to C in the main syscall handler, and just skip the
system call but otherwise return as usual, which will take care of the
pending irqs. This also does a bunch of other things including possible
signal delivery to the process, but the doomed transaction should still
be aborted when it is eventually returned to.

The sc system call path is changed to use the new C function as well to
reduce code and path differences. This slows down how quickly system
calls are aborted when called while a transaction is active, which could
potentially impact TM performance. But making any system call is already
bad for performance, and TM is on the way out, so go with simpler over
faster.

Fixes: 7fa95f9adaee7 ("powerpc/64s: system call support for scv/rfscv instructions")
Reported-by: Eirik Fuller <efuller@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Use #ifdef rather than IS_ENABLED() to fix build error on 32-bit]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210903125707.1601269-1-npiggin@gmail.com

powerpc/64e: Fix system call illegal mtmsrd instruction

BookE does not have mtmsrd, switch to use wrteei to enable MSR[EE].

Fixes: dd152f70bdc1 ("powerpc/64s: system call avoid setting MSR[RI] until we set MSR[EE]")
Reported-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210706051310.608992-1-npiggin@gmail.com

powerpc/64s: move ret_from_fork etc above __end_soft_masked

Code which runs with interrupts enabled should be moved above
__end_soft_masked where possible, because maskable interrupts that hit
below that symbol will need to consult the soft mask table, which is an
extra cost.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210630074621.2109197-10-npiggin@gmail.com

powerpc/64s/interrupt: clean up interrupt return labels

Normal kernel-interrupt exits can get interrupt_return_srr_user_restart
in their backtrace, which is an unusual and notable function, and it is
part of the user-interrupt exit path, which is doubly confusing.

Add non-local labels for both user and kernel interrupt exit cases to
address this and make the user and kernel cases more symmetric. Also get
rid of an unused label.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210630074621.2109197-9-npiggin@gmail.com

powerpc/64/interrupt: add missing kprobe annotations on interrupt exit symbols

If one interrupt exit symbol must not be kprobed, none of them can be,
without more justification for why it's safe. Disallow kprobing on any
of the (non-local) labels in the exit paths.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210630074621.2109197-8-npiggin@gmail.com

powerpc/64s: add a table of implicit soft-masked addresses

Commit 9d1988ca87dd ("powerpc/64: treat low kernel text as irqs
soft-masked") ends up catching too much code, including ret_from_fork,
and parts of interrupt and syscall return that do not expect to be
interrupts to be soft-masked. If an interrupt gets marked pending,
and then the code proceeds out of the implicit soft-masked region it
will fail to deal with the pending interrupt.

Fix this by adding a new table of addresses which explicitly marks
the regions of code that are soft masked. This table is only checked
for interrupts that below __end_soft_masked, so most kernel interrupts
will not have the overhead of the table search.

Fixes: 9d1988ca87dd ("powerpc/64: treat low kernel text as irqs soft-masked")
Reported-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210630074621.2109197-5-npiggin@gmail.com

powerpc/64e: remove implicit soft-masking and interrupt exit restart logic

The implicit soft-masking to speed up interrupt return was going to be
used by 64e as well, but it has not been extensively tested on that
platform and is not considered ready. It was intended to be disabled
before merge. Disable it for now.

Most of the restart code is common with 64s, so with more correctness
and performance testing this could be re-enabled again by adding the
extra soft-mask checks to interrupt handlers and flipping
exit_must_hard_disable().

Fixes: 9d1988ca87dd ("powerpc/64: treat low kernel text as irqs soft-masked")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210630074621.2109197-4-npiggin@gmail.com

powerpc/64: use interrupt restart table to speed up return from interrupt

Use the restart table facility to return from interrupt or system calls
without disabling MSR[EE] or MSR[RI].

Interrupt return asm is put into the low soft-masked region, to prevent
interrupts being processed here, although they are still taken as masked
interrupts which causes SRRs to be clobbered, and a pending soft-masked
interrupt to require replaying.

The return code uses restart table regions to redirct to a fixup handler
rather than continue with the exit, if such an interrupt happens. In
this case the interrupt return is redirected to a fixup handler which
reloads r1 for the interrupt stack and reloads registers and sets state
up to replay the soft-masked interrupt and try the exit again.

Some types of security exit fallback flushes and barriers are currently
unable to cope with reentrant interrupts, e.g., because they store some
state in the scratch SPR which would be clobbered even by masked
interrupts. For now the interrupts-enabled exits are disabled when these
flushes are used.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Guard unused exit_must_hard_disable() as reported by lkp]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210617155116.2167984-13-npiggin@gmail.com

powerpc/64: treat low kernel text as irqs soft-masked

Treat code below __end_soft_masked as soft-masked for the purpose
of alternate return. 64s already mostly does this for scv entry.

This will be used to exit from interrupts without disabling MSR[EE].

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210617155116.2167984-12-npiggin@gmail.com

powerpc/64s: system call avoid setting MSR[RI] until we set MSR[EE]

This extends the MSR[RI]=0 window a little further into the system
call in order to pair RI and EE enabling with a single mtmsrd.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210617155116.2167984-8-npiggin@gmail.com

powerpc/64: move interrupt return asm to interrupt_64.S

The next patch would like to move interrupt return assembly code to a low
location before general text, so move it into its own file and include via
head_64.S

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210617155116.2167984-7-npiggin@gmail.com