powerpc/configs/64s: Enable CONFIG_MEM_SOFT_DIRTY

Enable CONFIG_MEM_SOFT_DIRTY to get some test coverage. Distros enable
it, and it has been broken previously. See commit 66b2ca086210
("powerpc/64s/radix: Fix soft dirty tracking").

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231024112726.1819795-1-mpe@ellerman.id.au

powerpc/64: Enable accelerated crypto algorithms in defconfig

Enable all the acclerated crypto algorithms as modules in the 64-bit
defconfig, to get more test coverage.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230717115223.286158-1-mpe@ellerman.id.au

arch/*/configs/*defconfig: Replace AUTOFS4_FS by AUTOFS_FS

Commit a2225d931f75 ("autofs: remove left-over autofs4 stubs")
promised the removal of the fs/autofs/Kconfig fragment for AUTOFS4_FS
within a couple of releases, but five years later this still has not
happened yet, and AUTOFS4_FS is still enabled in 63 defconfigs.

Get rid of it mechanically:

git grep -l CONFIG_AUTOFS4_FS -- '*defconfig' |
xargs sed -i 's/AUTOFS4_FS/AUTOFS_FS/'

Also just remove the AUTOFS4_FS config option stub. Anybody who hasn't
regenerated their config file in the last five years will need to just
get the new name right when they do.

Signed-off-by: Sven Joachim <svenjoac@gmx.de>
Acked-by: Ian Kent <raven@themaw.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

powerpc/configs/64s: Drop JFS Filesystem

Unlikely that anyone is still regularly using JFS, drop it from the
defconfig.

Suggested-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230420051609.1324201-2-mpe@ellerman.id.au

powerpc/configs/64s: Use EXT4 to mount EXT2 filesystems

The ext4 code will mount ext2 filesystems, no need to build in both.

Suggested-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230420051609.1324201-1-mpe@ellerman.id.au

powerpc/configs/64s: Enable Device Mapper options

Add device mapper options for test coverage and in case folks are
booting systems that require them.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230414132415.821564-28-mpe@ellerman.id.au

powerpc/configs/64s: Enable PSTORE

Like pseries & powernv_defconfig, enable PSTORE.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230414132415.821564-27-mpe@ellerman.id.au

powerpc/configs/64s: Enable VLAN support

Most other configs, and distros enable it.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230414132415.821564-26-mpe@ellerman.id.au

powerpc/configs/64s: Enable BLK_DEV_NVME

Copy powernv_defconfig and enable BLK_DEV_NVME.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230414132415.821564-25-mpe@ellerman.id.au

powerpc/configs/64s: Drop REISERFS

No reason to use this anymore.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230414132415.821564-24-mpe@ellerman.id.au

powerpc/configs/64s: Use SHA512 for module signatures

Modern distros use SHA512 for module signing.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230414132415.821564-23-mpe@ellerman.id.au

powerpc/configs/64s: Enable IO_STRICT_DEVMEM

Distros enable it.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230414132415.821564-22-mpe@ellerman.id.au

powerpc/configs/64s: Enable SCHEDSTATS

Distros enable it.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230414132415.821564-21-mpe@ellerman.id.au

powerpc/configs/64s: Enable DEBUG_VM & other options

Fedora enables DEBUG_VM, which has led to occasions where a VM_BUG_ON()
is not caught by upstream testing, but rather is first found in Fedora,
which is not how it's meant to be.

PAGE_OWNER & PAGE_POISONING both need to be enabled on the kernel
command line, so should not add much overhead in normal operation.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230414132415.821564-20-mpe@ellerman.id.au

powerpc/configs/64s: Enable EMULATED_STATS

This is enabled in some of the other powerpc configs, and can be useful
for debugging, so enable it in ppc64[le]_defconfig.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230414132415.821564-19-mpe@ellerman.id.au

powerpc/configs/64s: Enable KUNIT and most tests

All built as modules, so the tests only happen when the modules are
loaded, not affecting normal boot time.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230414132415.821564-18-mpe@ellerman.id.au

powerpc/configs/64s: Enable SELINUX

Fedora, CentOS, RHEL & SUSE all enable it.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230414132415.821564-17-mpe@ellerman.id.au

powerpc/configs/64s: Enable YAMA, LANDLOCK & BPF LSMs

Multiple distros enable these.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230414132415.821564-16-mpe@ellerman.id.au

powerpc/configs/64s: Enable SLAB hardening options

Fedora & CentOS enable these.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230414132415.821564-15-mpe@ellerman.id.au

powerpc/configs/64s: Enable ZSWAP & ZRAM

Most distros enable these. In particular Fedore uses zram in the default
install.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230414132415.821564-14-mpe@ellerman.id.au

powerpc/configs/64s: Enable CHECKPOINT_RESTORE

Most distros enable this.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230414132415.821564-13-mpe@ellerman.id.au

powerpc/configs/64s: Enable common CGROUP & related options

Distros enable these options.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230414132415.821564-12-mpe@ellerman.id.au

powerpc/configs/64s: Enable NO_HZ_FULL

At least Fedora & SUSE enable it.

VIRT_CPU_ACCOUNTING_GEN is selected so no longer needs to be in the
defconfig.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230414132415.821564-11-mpe@ellerman.id.au

powerpc/configs/64s: Enable common accounting options

These options are enabled by most distros.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230414132415.821564-10-mpe@ellerman.id.au

powerpc/configs/64s: Enable AUDIT

Essentially all distros enable it.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230414132415.821564-9-mpe@ellerman.id.au

powerpc/configs/64s: Enable PREEMPT_VOLUNTARY

Traditionally on powerpc servers PREEMPT_NONE was used, but these days
multiple distros are building with PREEMPT_VOLUNTARY - Ubuntu, Fedora &
CentOS all enable it.

So update the upstream config to reflect that, and get test coverage
before code hits the distros.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230414132415.821564-8-mpe@ellerman.id.au

powerpc/configs/64s: Add secure boot options to defconfig

Add the numerous options required to get secure boot enabled.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230414132415.821564-6-mpe@ellerman.id.au

powerpc/configs/64s: Enable PAPR_SCM

This is a powerpc specific driver so add the symbols required to enable
it so it gets some build/boot test coverage.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230414132415.821564-5-mpe@ellerman.id.au

powerpc/configs/6s: Drop obsolete crypto ALGs

These algorithms were marked obsolete in commit 1674aea5f080 ("crypto:
Kconfig - mark unused ciphers as obsolete").

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230414132415.821564-4-mpe@ellerman.id.au

powerpc/configs/64s: Drop IPV6 which is default y

Since commit de551f2eb22a ("net: Build IPv6 into kernel by default"),
IPV6 is default y.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230414132415.821564-3-mpe@ellerman.id.au

powerpc/configs/64s: Drop SPLPAR which is default y

SPLPAR is default y since commit 20c0e8269e9d ("powerpc/pseries:
Implement paravirt qspinlocks for SPLPAR"), so doesn't need to be in the
defconfig.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230414132415.821564-2-mpe@ellerman.id.au

powerpc/configs/64s: Update defconfig for symbol movement

Update ppc64_defconfig to account for symbols moving around, no actual
changes.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230414132415.821564-1-mpe@ellerman.id.au

ixgb: Remove ixgb driver

There are likely no users of this driver as the hardware has been
discontinued since 2010. Remove the driver and all references to it
in documentation.

Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

powerpc/configs: Update config files for removed/renamed symbols

Clean up config files by:
- removing configs that were deleted in the past
- removing configs not in tree and without recently pending patches
- adding new configs that are replacements for old configs in the file

For some detailed information, see:
https://lore.kernel.org/kernel-janitors/20220929090645.1389-1-lukas.bulwahn@gmail.com/

Renamed:
- CONFIG_PPC_PTDUMP -> CONFIG_GENERIC_PTDUMP
e084728393a5 ("powerpc/ptdump: Convert powerpc to GENERIC_PTDUMP")

Removed:
- CONFIG_BLK_DEV_CRYPTOLOOP
47e9624616c8 ("block: remove support for cryptoloop and the xor transfer")

- CONFIG_CRYPTO_RMD128
b21b9a5e0aef ("crypto: rmd128 - remove RIPE-MD 128 hash algorithm")

- CONFIG_CRYPTO_RMD256
c15d4167f0b0 ("crypto: rmd256 - remove RIPE-MD 256 hash algorithm")

- CONFIG_CRYPTO_RMD320
93f64202926f ("crypto: rmd320 - remove RIPE-MD 320 hash algorithm")

- CONFIG_CRYPTO_SALSA20
663f63ee6d9c ("crypto: salsa20 - remove Salsa20 stream cipher algorithm")

- CONFIG_CRYPTO_TGR192
87cd723f8978 ("crypto: tgr192 - remove Tiger 128/160/192 hash algorithms")

- CONFIG_HARDENED_USERCOPY_PAGESPAN
1109a5d90701 ("usercopy: Remove HARDENED_USERCOPY_PAGESPAN")

- CONFIG_RAPIDIO_TSI568, CONFIG_RAPIDIO_TSI57X
612d4904191f ("rapidio: remove not used code about RIO_VID_TUNDRA")

- CONFIG_RAW_DRIVER
603e4922f1c8 ("remove the raw driver")

- CONFIG_ROCKETPORT
3b00b6af7a5b ("tty: rocket, remove the driver")

- CONFIG_ENABLE_MUST_CHECK
196793946264 ("Compiler Attributes: remove CONFIG_ENABLE_MUST_CHECK")

Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
[mpe: Add documentation of relevant commit for each symbol change]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220929101502.32527-1-lukas.bulwahn@gmail.com

powerpc/64: Remove PPC64 special case for cputime accounting default

Distro kernels tend to be moving to VIRT_CPU_ACCOUNTING_GEN, and there
is not much reason why PPC64 should be special here. Remove the special
case and make the ppc64 and pseries defconfigs use GEN accounting
(others will use TICK, as-per Kconfig defaults).

VIRT_CPU_ACCOUNTING_NATIVE does provide scaled vtime and stolen time
apportioned between system and user time, and vtime accounting is not
unconditionally enabled, and possibly other things. But it would be
better at this point to extend GEN to cover important missing features
rather than directing users back to a less used option.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220902085316.2071519-4-npiggin@gmail.com

powerpc/pseries: delete scanlog

Remove the pseries scanlog driver.

This code supports functions from Power4-era servers that are not present
on targets currently supported by arch/powerpc. System manuals from this
time have this description:

Scan Dump data is a set of chip data that the service processor gathers
after a system malfunction. It consists of chip scan rings, chip trace
arrays, and Scan COM (SCOM) registers. This data is stored in the
scan-log partition of the system’s Nonvolatile Random Access
Memory (NVRAM).

PowerVM partition firmware development doesn't recognize the associated
function call or property, and they don't see any references to them in
their codebase. It seems to have been specific to non-virtualized pseries.

References:

Historical Linux commit from February 2003 (interesting to note this seems
to be the source of non-GPL exports for rtas_call etc):
https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git/commit/?id=f92e361842d5251e50562b09664082dcbd0548bb

IntelliStation and pSeries docs which refer to the feature:
http://ps-2.retropc.se/basil.holloway/ALL%20PDF/380635.pdf
http://ps-2.kev009.com/rs6000/manuals/p/p615-6C3-6E3/6C3_and_6E3_Users_Guide_SA38-0629.pdf

Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210920173203.1800475-1-nathanl@linux.ibm.com

powerpc/64s: Default to 64K pages for 64 bit book3s

For 64-bit book3s the default should be 64K as that's what modern CPUs
are designed for.

The following defconfigs already set CONFIG_PPC_64K_PAGES:

cell_defconfig
pasemi_defconfig
powernv_defconfig
ppc64_defconfig
pseries_defconfig
skiroot_defconfig

The have the option removed from the defconfig, as it is now the
default.

The defconfigs that now need to set CONFIG_PPC_4K_PAGES to maintain
their existing behaviour are:

g5_defconfig
maple_defconfig
microwatt_defconfig
ps3_defconfig

Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
BugLink: https://github.com/linuxppc/issues/issues/109
Link: https://lore.kernel.org/r/20211015001649.45591-1-joel@jms.id.au

powerpc/configs: Enable STACK_TRACER and FTRACE_SYSCALLS in some of the configs

Both these config options are generally enabled in distro kernels.
Enable the same in a few powerpc64 configs to get better coverage and
testing.

Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210524120227.3333208-1-naveen.n.rao@linux.vnet.ibm.com

powerpc/configs: Add IBMVNIC to some 64-bit configs

This is an IBM specific driver that we should enable to get some
build/boot testing.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210302020954.2980046-1-mpe@ellerman.id.au

powerpc/64s: Add FA_DUMP to defconfig

FA_DUMP (Firmware Assisted Dump) is a powerpc only feature that should
be enabled in our defconfig to get some build / test coverage.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210420042209.1641634-1-mpe@ellerman.id.au

arch: powerpc: Stop building and using oprofile

The "oprofile" user-space tools don't use the kernel OPROFILE support
any more, and haven't in a long time. User-space has been converted to
the perf interfaces.

This commits stops building oprofile for powerpc and removes any
reference to it from directories in arch/powerpc/ apart from
arch/powerpc/oprofile, which will be removed in the next commit (this is
broken into two commits as the size of the commit became very big, ~5k
lines).

Note that the member "oprofile_cpu_type" in "struct cpu_spec" isn't
removed as it was also used by other parts of the code.

Suggested-by: Christoph Hellwig <hch@infradead.org>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Robert Richter <rric@kernel.org>
Acked-by: William Cohen <wcohen@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Thomas Gleixner <tglx@linutronix.de>

powerpc/configs: Remove dead symbols

Remove references to symbols that no longer exist as reported by
scripts/checkkconfigsymbols.py.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200724131728.1643966-2-mpe@ellerman.id.au

powerpc/configs: Add LIBNVDIMM to ppc64_defconfig

This gives us OF_PMEM which is useful in mambo.

This adds 153K to the text of ppc64le_defconfig which 0.8% of the
total text.

LIBNVDIMM text data bss dec hex
Without 18574833 5518150 1539240 25632223 1871ddf
With 18727834 5546206 1539368 25813408 189e1a0

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200519043009.3081885-1-mikey@neuling.org

powerpc/configs/64s: Enable CONFIG_PRINTK_CALLER

This adds the CPU or thread number to printk messages. This helps a
lot when deciphering concurrent oopses that have been interleaved.

Example output, of PID1 (T1) triggering a warning:

[ 1.581678][ T1] WARNING: CPU: 0 PID: 1 at crypto/rsa-pkcs1pad.c:539 pkcs1pad_verify+0x38/0x140
[ 1.581681][ T1] Modules linked in:
[ 1.581693][ T1] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.5.0-rc5-gcc-8.2.0-00121-gf84c2e595927-dirty #1515
[ 1.581700][ T1] NIP: c000000000207d64 LR: c000000000207d3c CTR: c000000000207d2c
[ 1.581708][ T1] REGS: c0000000fd2e7560 TRAP: 0700 Not tainted (5.5.0-rc5-gcc-8.2.0-00121-gf84c2e595927-dirty)
[ 1.581712][ T1] MSR: 9000000000029033 <SF,HV,EE,ME,IR,DR,RI,LE> CR: 44000222 XER: 00040000

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200520121257.961112-1-mpe@ellerman.id.au

scsi: sr: remove references to BLK_DEV_SR_VENDOR, leave it enabled

This kernel configuration is basically enabling/disabling sr driver quirks
detection. While these quirks are for fairly rare devices (very old CD
burners, and a glucometer), the additional detection of these models is a
very minimal amount of code.

The logic behind the quirks is always built into the sr driver.

This also removes the config from all the defconfig files that are enabling
this already.

Link: https://lore.kernel.org/r/20200223191144.726-1-flameeyes@flameeyes.com
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Diego Elio Pettenò <flameeyes@flameeyes.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

powerpc/configs: Drop CONFIG_QLGE which moved to staging

The QLGE driver moved to staging in commit 955315b0dc8c ("qlge: Move
drivers/net/ethernet/qlogic/qlge/ to drivers/staging/qlge/"), meaning
our defconfigs that enable it have no effect as we don't enable
CONFIG_STAGING.

It sounds like the device is obsolete, so drop the driver.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20200121043000.16212-1-mpe@ellerman.id.au

powerpc/configs: Enable secure guest support in pseries and ppc64 defconfigs

Enables running as a secure guest in platforms with an Ultravisor.

Signed-off-by: Ryan Grimm <grimm@linux.vnet.ibm.com>
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190820021326.6884-17-bauerman@linux.ibm.com

powerpc: Enable CONFIG_IPV6 in ppc64_defconfig

Enable CONFIG_IPV6 in ppc64_defconfig to enable
certain network functionalities required for tests.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/configs: Disable latencytop

latencytop adds almost 4kB to each and every task struct and as such
it doesn't deserve to be in our defconfigs.

Signed-off-by: Anton Blanchard <anton@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/configs: Remove useless UEVENT_HELPER_PATH

Remove the CONFIG_UEVENT_HELPER_PATH because:
1. It is disabled since commit 1be01d4a5714 ("driver: base: Disable
CONFIG_UEVENT_HELPER by default") as its dependency (UEVENT_HELPER) was
made default to 'n',
2. It is not recommended (help message: "This should not be used today
[...] creates a high system load") and was kept only for ancient
userland,
3. Certain userland specifically requests it to be disabled (systemd
README: "Legacy hotplug slows down the system and confuses udev").

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/configs: Don't enable PPC_EARLY_DEBUG in defconfigs

This reverts the remains of commit b9ef7d6b11c1 ("powerpc: Update
default configurations").

That commit was proceeded by a commit which added a config option to
control use of BOOTX for early debug, ie. PPC_EARLY_DEBUG_BOOTX, and
then the update of the defconfigs was intended to not change behaviour
by then enabling the new config option.

However enabling PPC_EARLY_DEBUG had other consequences, notably
causing us to register the udbg console at the end of udbg_early_init().

This means on a system which doesn't have anything that BOOTX can
use (most systems), we register the udbg console very early but the
bootx code just throws everything away, meaning early boot messages
are never printed to the console.

What we want to happen is for the udbg console to only be registered
later (from setup_arch()) once we've setup udbg_putc, and then all
early boot messages will be replayed.

Fixes: b9ef7d6b11c1 ("powerpc: Update default configurations")
Reported-by: Torsten Duwe <duwe@lst.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/configs: Add missing config symbols for ppc64_defconfig

This patch adds missing config symbols for ppc64_defconfig
to enable cgroups, memhotplug, numa balancing and XFS
in core kernel image.

Signed-off-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/configs: Add CONFIG_NR_CPUS to ppc64_defconfig

CONFIG_NR_CPUS is not set in ppc64_defconfig, So it gets default of 32
which is quite small for modern powerpc systems. Instead set a default
of 2048 like other powerpc defconfigs.

Signed-off-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/configs: Update ppc64_defconfig with savedefconfig

Update ppc64_defconfig with savedefconfig. No symbols are added or
removed, this is 100% movement.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/configs: Remove unnecessary ftrace symbols

In commit 539df7fcb303 ("powerpc/configs: Enable function trace by
default") we added:

CONFIG_FTRACE=y
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y

To ppc64_defconfig, powernv_defconfig and pseries_defconfig.

But only CONFIG_FUNCTION_TRACER=y is required, CONFIG_FTRACE is
default y if DEBUG_KERNEL is enabled, which we have. And then
CONFIG_FUNCTION_GRAPH_TRACER is default y when CONFIG_FUNCTION_TRACER
is enabled.

The extra symbols were already removed from powernv_defconfig in
commit 9a018fb1e147 ("powerpc/config: powernv_defconfig updates").

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/config: Enable CONFIG_PRINTK_TIME

for 64bit configs which use for CONFIG_LOG_BUF_SHIFT the same
or higher value than the default (currently 17).

Signed-off-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/powernv: Don't select the cpufreq governors

Deciding wich govenors should be built into the kernel can be left to
users to configure.

Fixes: 81f359027a3a ("cpufreq: powernv: Select CPUFreq related Kconfig options for powernv")
Signed-off-by: Joel Stanley <joel@jms.id.au>
[mpe: Update powernv/ppc64 defconfigs to enable them by default]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

irqdomain: Kill CONFIG_IRQ_DOMAIN_DEBUG

CONFIG_IRQ_DOMAIN_DEBUG is similar to CONFIG_GENERIC_IRQ_DEBUGFS,
just with less information.

Spring cleanup time.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Yang Shunyong <shunyong.yang@hxt-semitech.com>
Link: https://lkml.kernel.org/r/20180117142647.23622-1-marc.zyngier@arm.com

powerpc/configs: Update for CONFIG_SND changes

Commit eb3b705aaed9 ("ALSA: Make CONFIG_SND_OSSEMUL user-selectable")
means we need to set CONFIG_SND_OSSEMUL in our configs, otherwise we
lose some of the SND symbols.

And commit 0181307abc1d ("ALSA: seq: Reorganize kconfig and build")
reorganised things, which causes the churn.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/configs: Enable THP and 64K for ppc64(le)_defconfig

Enable 64K page size and THP. I use ppc64le_defconfig when I need
a single config across guest and host, but having 4K page size
as default is not what I expect. I could move these over to
server.config and merge if ppc64_defconfig is meant for systems
that use 4k pages by default.

Signed-off-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/configs: Enable function trace by default

Most (all?) distros turn these on, so it makes sense to enable them
for testing coverage, and they're also useful for developers.

Signed-off-by: Balbir Singh <bsingharora@gmail.com>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
[mpe: Reword change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/configs: Add CONFIG_RAS now required for CONFIG_EDAC

In commit e3c4ff6d8c94 ("EDAC: Remove EDAC_MM_EDAC") CONFIG_EDAC grew
a dependency on CONFIG_RAS. Some of our defconfigs don't have the
latter, which means we lose CONFIG_EDAC, so add CONFIG_RAS to fix
that.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/configs: Drop CONFIG_SERIAL_TXX9_* from cell/ppc64

In commit bf4981a00636 ("powerpc: Remove the celleb support") we
dropped the celleb support, which made these symbols unselectable
because we no longer select HAS_TX99_SERIAL. So drop them from the
defconfigs.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/configs: Drop MEMORY_HOTREMOVE from ppc64/cell

xxxx

In commit 577ec789a79e ("powerpc/cell: Drop select of MEMORY_HOTPLUG")
we removed the last traces of any dependency between

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/configs: Drop no longer needed CONFIG_SMP for pseries/ppc64/powernv

In commit 40e275653e2c ("powerpc/powernv: Always enable SMP when
building powernv") and 270e2dc9b803 ("powerpc/pseries: Always enable
SMP when building pseries") we forced CONFIG_SMP on for some configs.
Therefore we don't need to set it in those configs anymore.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/configs: Drop unnecessary CONFIG_UPROBE_EVENT

In commit 6b0b7551428e ("perf/core: Rename CONFIG_[UK]PROBE_EVENT to
CONFIG_[UK]PROBE_EVENTS") it was renamed to CONFIG_UPROBE_EVENTS.

Additionally it's default y, and we have the prerequisites enabled, so
we don't need it in our defconfigs.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/configs: Drop no longer needed CONFIG_CRYPTO_DEV_VMX_ENCRYPT

Since commit ccf5c442a1b8 ("crypto: vmx - Convert to CPU feature based
module autoloading") we no longer need to set
CONFIG_CRYPTO_DEV_VMX_ENCRYPT in our defconfigs.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/configs: Drop no longer needed CONFIG_FHANDLE

Since commit f76be61755c5 ("Make CONFIG_FHANDLE default y") we no
longer need to set CONFIG_FHANDLE in our defconfigs.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/configs: Explicitly drop CONFIG_INPUT_MOUSEDEV

In commit 73d8ef76006b ("Input: mousedev - stop offering PS/2 to userspace by
default") (Jan 2017), CONFIG_INPUT_MOUSEDEV was switched from default y to
default n, with the explanation:

Evdev interface has been available for many years and by now everyone
is switched to using it, so let's stop offering /dev/input/mouseN
and /dev/psaux by default.

We had a number of configs which had it enabled, but going by the above
explanation probably don't need it enabled anymore.

So drop the last remnants of it from our defconfigs.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/configs: Drop unneeded CONFIG_CRYPTO_ANSI_CPRNG

Since commit 401e4238f35c ("crypto: rng - Make DRBG the default RNG") we no longer need to set CONFIG_CRYPTO_ANSI_CPRNG in our defconfigs.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/configs: Update for symbol movement only

Update defconfigs for symbols that have moved around, without their
value changing.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/configs: Re-enable HARD/SOFT lockup detectors

In commit 05a4a9527931 ("kernel/watchdog: split up config options"),
CONFIG_LOCKUP_DETECTOR was split into two separate config options,
CONFIG_HARDLOCKUP_DETECTOR and CONFIG_SOFTLOCKUP_DETECTOR.

Our defconfigs still have CONFIG_LOCKUP_DETECTOR=y, but that is no longer
user selectable, and we don't mention the new options, so we end up with
none of them enabled.

So update the defconfigs to turn on the new SOFT and HARD options, the
end result being the same as what we had previously.

Fixes: 05a4a9527931 ("kernel/watchdog: split up config options")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

EDAC: Remove EDAC_MM_EDAC

Move all the EDAC core functionality behind CONFIG_EDAC and get rid of
that indirection. Update defconfigs which had it.

While at it, fix dependencies such that EDAC depends on RAS for the
tracepoints.

Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: linux-edac@vger.kernel.org

powerpc/configs: Re-enable POWER8 crc32c

The config option for the POWER8 crc32c recently changed from
CONFIG_CRYPT_CRC32C_VPMSUM to CONFIG_CRYPTO_CRC32C_VPMSUM. Update
the configs.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/configs: Make oprofile a module

Most people use perf these days, so save about 31kB by making oprofile
a module.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/configs: Re-enable ISO9660_FS as a built-in in 64 bit configs

It turns out cloud-config uses ISO9660 filesystems to inject
configuration data into cloud images. The cloud-config failures when
ISO9660_FS is not enabled are cryptic, and building it in makes
mainline testing easier, so re-enable it.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/64: Include bpf/bcc related config options in defconfigs

Specifically:
- CONFIG_BPF_SYSCALL
- CONFIG_NET_SCHED
- CONFIG_NET_CLS_BPF
- CONFIG_NET_CLS_ACT
- CONFIG_NET_ACT_BPF
- CONFIG_CGROUP_BPF
- CONFIG_UPROBE_EVENT

... in pseries, ppc64 and powernv defconfigs.

Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc: Enable CONFIG_KEXEC_FILE in powerpc server defconfigs.

Enable CONFIG_KEXEC_FILE in powernv_defconfig, ppc64_defconfig and
pseries_defconfig.

It depends on CONFIG_CRYPTO_SHA256=y, so add that as well.

Signed-off-by: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/configs: Turn on PPC crypto implementations in the server defconfigs

These are the PPC optimised versions of various crypto algorithms, so we
should turn them on by default to get test coverage.

Suggested-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc: convert ppc64_defconfig to use libata PATA drivers

IDE subsystem has been deprecated since 2009 and the majority
(if not all) of Linux distributions have switched to use
libata for ATA support exclusively. However there are still
some users (mostly old or/and embedded non-x86 systems) that
have not converted from using IDE subsystem to libata PATA
drivers. This doesn't seem to be good thing in the long-term
for Linux as while there is less and less PATA systems left
in use:

* testing efforts are divided between two subsystems

* having duplicate drivers for same hardware confuses users

This patch converts ppc64_defconfig to use libata PATA
drivers.

Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

powerpc/configs: Enable Intel i40e on 64 bit configs

We are starting to see i40e adapters in recent machines, so enable
it in our configs.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/configs: Change a few things from built in to modules

Change a few devices and filesystems that are seldom used any more
from built in to modules. This reduces our vmlinux about 500kB.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/configs: Bump kernel ring buffer size on 64 bit configs

When we issue a system reset, every CPU in the box prints an Oops,
including a backtrace. Each of these can be quite large (over 4kB)
and we may end up wrapping the ring buffer and losing important
information.

Bump the base size from 128kB to 256kB and the per CPU size from
4kB to 8kB.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/configs: Enable VMX crypto

We see big improvements with the VMX crypto functions (often 10x or more),
so enable it as a module.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/configs: Remove old symbols from defconfigs

Update defconfigs to remove old symbols and comments referencing old
symbols.

Dropped:

* AVERAGE
* INET_LRO
* EXT3_DEFAULTS_TO_ORDERED
* EXT3_FS_XATTR
* I2O
* INFINIBAND_AMSO1100
* INFINIBAND_EHCA
* IP1000

Replaced:

* BLK_DEV_XIP -> BLK_DEV_RAM_DAX
* CLK_PPC_CORENET -> CLK_QORIQ
* EXT2_FS_XIP -> FS_DAX
* EXT3_FS* -> EXT4_FS*

Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/cell: Remove the Cell QPACE code

All users of QPACE have upgraded to QPACE2 so remove the Cell QPACE code.

Signed-off-by: Rashmica Gupta <rashmicy@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/configs: Re-enable CONFIG_SCSI_DH

Commit 086b91d052eb ("scsi_dh: integrate into the core SCSI code")
changed CONFIG_SCSI_DH from tristate to bool.

Our defconfigs have CONFIG_SCSI_DH=m, which the kconfig machinery warns
us is invalid, but instead of converting it to =y it leaves it unset.
This means we loose the CONFIG_SCSI_DH code and everything that depends
on it.

So convert the values in the defconfigs to =y.

Fixes: 086b91d052eb ("scsi_dh: integrate into the core SCSI code")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/powernv: Enable LEDS support

Commit 84ad6e5c added LEDS support for PowerNV platform. Lets
update ppc64_defconfig to pick LEDS driver.

PowerNV LEDS driver looks for "/ibm,opal/leds" node in device
tree and loads if this node exists. Hence added it as 'm'.

Also note that powernv LEDS driver needs NEW_LEDS and LEDS_CLASS
as well. Hence added them to config file.

mpe: Also add them to pseries_defconfig, which is currently also used
for powernv systems.

Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
Cc: Stewart Smith <stewart@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/config: Enable bnx2x on ppc64 and pseries defconfigs

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc: Remove the celleb support

The celleb code has seen no actual development for ~7 years.

We (maintainers) have no access to test hardware, and it is highly
likely the code has bit-rotted.

As far as we're aware the hardware was never widely available, and is
certainly no longer available, and no one on the list has shown any
interest in it over the years.

So remove it. If anyone has one and cares please speak up.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Jeremy Kerr <jk@ozlabs.org>

powerpc: Enable overlayfs on pseries and ppc64 defconfigs

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc: Enable KSM on pseries and ppc64 defconfigs

KSM will only be used on areas marked for merging via madvise, and it
is showing nice improvements on KVM workloads, so enable it by
default.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc: Enable CONFIG_SATA_AHCI on pseries and ppc64 defconfigs

We are starting to see ppc64 boxes with SATA AHCI adapters in it,
so enable it in our defconfigs.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc: Enable on demand governor on ppc64_defconfig

This was enabled on the pseries defconfigs recently, but missed
the ppc64 one.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc: Update all configs using savedefconfig

It looks like it's ~4 years since we updated some of these, so do a bulk
update.

Verified that the before and after generated configs are exactly the
same.

Which begs the question why update them? The answer is that it can be
confusing when the stored defconfig drifts too far from the generated
result.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

netpoll: delete defconfig references to obsolete NETPOLL_TRAP

In commit 9c62a68d13119a1ca9718381d97b0cb415ff4e9d ("netpoll:
Remove dead packet receive code (CONFIG_NETPOLL_TRAP)") this
Kconfig option was removed. So remove references to it from
all defconfigs as well.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

powerpc: Enable CONFIG_CRASH_DUMP=y for ppc64_defconfig

It pulls in more code, including causing us to build a relocatable
kernel, which is good for testing.

The resulting kernel is still usable as a non-crash dump kernel.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc: Set CONFIG_NET=y in defconfigs

Commit 5d6be6a5 ("scsi_netlink : Make SCSI_NETLINK dependent on NET
instead of selecting NET") removed what happened to be the only instance
of 'select NET'. Defconfigs that were relying on the select now lack
networking support.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>

powerpc: Make CONFIG_FHANDLE=y for all 64 bit powerpc defconfigs

CONFIG_FHANDLE is a requirement for systemd and with the increasing
uptake of systemd within distros it makes sense for 64 bit defconfigs
to include it.

Signed-off-by: Cyril Bur <cyril.bur@au1.ibm.com>

powerpc: Use default set of netfilter modules (CONFIG_NETFILTER_ADVANCED=n)

Our netfilter options are stale and important things like masquerading
are no longer enabled. Instead of trying to keep up with any updates,
set CONFIG_NETFILTER_ADVANCED=n on ppc64* and pseries* defconfigs.
This enables the most common netfilter modules for us.

While here, enable the network bridge module which is heavily used in
KVM setups.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc: add SATA_MV to ppc64_defconfig

This makes ppc64_defconfig bootable without initrd on pasemi systems,
most of whom have MV SATA controllers. Some have SIL24, but that driver
is already enabled.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc: Enable virtio on ppc64 and pseries configs

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc: Enable multipath modules on ppc64 and pseries

Enable a few modules required to boot on a POWER multipath
box.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc: sync ppc64, ppc64e and pseries configs

Run savedefconfig over the ppc64, ppc64e and pseries config

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

PCI: hotplug: Convert to be builtin only, not modular

Convert CONFIG_HOTPLUG_PCI from tristate to bool. This only affects
the hotplug core; several of the hotplug drivers can still be modules.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Yinghai Lu <yinghai@kernel.org>

powerpc: Update default configurations

Update default configurations for systems with CONFIG_BOOTX_TEXT
selected so that they continue to print early debug messages as is
currently the case.

Signed-off-by: Alistair Popple <alistair@popple.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc: Add transactional memory to pseries and ppc64 defconfigs

Signed-off-by: Matt Evans <matt@ozlabs.org>
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc: Enable devtmpfs, EFI partition support and tmpfs ACLs on pseries, ppc64 and ppc64e defconfig

We need devtmpfs enabled to boot on recent versions of Fedora. EFI
partitions will be useful for large block devices. tmpfs ACL support
is used by some distros for managing access to devices.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc: Cleanup NLS config options on pseries, ppc64 and ppc64e defconfig

Set CONFIG_NLS_DEFAULT to utf8. The distros do this (eg ppc64 FC17
and RHEL6) as well as the x86 defconfigs. Userspace these days is
most likely to expect utf8 anyway.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc: Run savedefconfig over pseries, ppc64 and ppc64e defconfig

No changes, just update the configs with savedefconfig.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc: Add denormalisation exception handling for POWER6/7

On POWER6 and POWER7 if the input operand to an instruction is a
denormalised single precision binary floating point value we can take
a denormalisation exception where it's expected that the hypervisor
(HV=1) will fix up the inputs before the instruction is run.

This adds code to handle this denormalisation exception for POWER6 and
POWER7.

It also add a CONFIG_PPC_DENORMALISATION option and sets it in
pseries/ppc64_defconfig.

This is useful on bare metal systems only. Based on patch from Milton
Miller.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

netfilter: remove xt_NOTRACK

It was scheduled to be removed for a long time.

Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Cc: Patrick McHardy <kaber@trash.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: netfilter@vger.kernel.org
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

powerpc/crypto: rework Kconfig

This patch creates a new submenu for the NX cryptographic
hardware accelerator and breaks the NX options into their own
Kconfig file under drivers/crypto/nx/Kconfig.

This will permit additional NX functionality to be easily
and more cleanly added in the future without touching
drivers/crypto/Makefile|Kconfig.

Signed-off-by: Seth Jennings <sjenning@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

powerpc: Enable pseries hardware RNG and crypto modules

Enable the hardware RNG and crypto modules. I verified they both
autoload via the VIO subsystem, so there is no need to build them in.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc: Turn on BPF_JIT in ppc64_defconfig

Matt added BPF_JIT support in commit 0ca87f05, but currently none of our
defconfigs build it. Turn that sucker on.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc: Enable jump label support

When looking through some instruction traces I noticed our tracepoint
checks were inline. It turns out we don't have CONFIG_JUMP_LABEL
enabled.

By enabling CONFIG_JUMP_LABEL we replace a load/compare/branch with
a nop at every tracepoint call. For example in do_IRQ:

CONFIG_JUMP_LABEL disabled:
stdx 3,11,9
lwz 0,8(29)
cmpwi 7,0,0
bne- 7,.L124
bl .irq_enter

CONFIG_JUMP_LABEL enabled:
stdx 3,11,9
nop
bl .irq_enter

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

irqdomain/powerpc: updated defconfigs for VIRQ_DEBUG rename

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

powerpc: Remove legacy iSeries from ppc64_defconfig

Since we are heading towards removing the Legacy iSeries platform, start
by no longer building it for ppc64_defconfig.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc: Enable squashfs as a module

Most distros use it so we may as well enable it and get regular compile
testing.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc: Add KVM as module to defconfigs

Add HV mode KVM to Book3 server 64bit defconfigs as a module.

Doesn't add much to the size:
text data bss dec hex filename
8244109 4686767 994000 13924876 d47a0c vmlinux.vanilla
8256092 4691607 994128 13941827 d4bc43 vmlinux.kvm

This should enable more testing of this configuration.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc: Enable lockup and hung task detectors in pseries and ppc64 defeconfigs

As a result of changes to Kconfig files, we no longer enable
the lockup and hung task detectors. Both are very light weight
and provide useful information in the event of a hang, so
reenable them.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc: Add mpt2sas driver to pseries and ppc64 defconfig

Add mpt2sas driver to pseries and ppc64 defconfig.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc: Disable IRQs off tracer in ppc64 defconfig

The IRQs off tracer enables mcount which has a big impact on
performance. Disable it.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc: Sync pseries and ppc64 defconfigs

The pseries defconfig had a number of drivers enabled and we may
as well add them to the ppc64 defconfig.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc: Trim defconfigs

This trims all our defconfigs using make savedefconfig

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc: Disable CONFIG_SYSFS_DEPRECATED

Acked-by: Grant Likely <grant.likely@secretlab.ca>

On 5 May 2010 21:33, "Anton Blanchard" <anton@samba.org> wrote:

CONFIG_SYSFS_DEPRECATED can cause issues with newer distros and should not
be required for any distro in the last 3 or 4 years, so disable it.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc: Build-in e1000e for pseries & ppc64_defconfig

The e1000e device is becoming more common these days, so let's just
build it in for pseries & ppc64_defconfig.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc: Reduce differences between pseries and ppc64 defconfigs

The pseries and ppc64 defconfigs have drifted apart over the years. Reduce
some of the differences while still keeping the idea that the ppc64 defconfig
is cross platform but enables fewer features than pseries, eg NR_CPUS is
lower.

Also enable a number of common adapters as modules.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

ps3_gelic_wireless: Remove PS3 gelic legacy wpa support

The current PS3 gelic wireless driver has support for wireless
extensions. The original PS3 gelic wireless driver exposed a
dedicated API for a dedicated wpa_supplicant driver. This old
API could be enabled with CONFIG_GELIC_WIRELESS_OLD_PSK_INTERFACE,
however, as this is not being used by any distros, and it is being
removed from the driver and from wpa_supplicant.

Signed-off-by: Hamish Guthrie <hamish.guthrie@sonycom.com>
Acked-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

powerpc/defconfigs: Set HZ=100 on pseries and ppc64 defconfigs

Now we have high res timers there is less of a reason for a high HZ value.
Furthermore I think there a few reasons we should reduce HZ to 100:

- Timer interrupt overhead. While this overhead is small, there are
applications that are very sensitive to jitter (eg some HPC apps).

- Issues with the timer wheel code. When coming out of NO_HZ idle we work our
way through the timer code one tick at a time. If we have been idle a long
time, this adds up - I sometimes see milliseconds of time spent in that
loop.

Long term we should fix the timer wheel algorithm, but for now if we reduce
HZ then we reduce the amount of work the timer code has to do when coming
out of idle.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc/defconfigs: Disable token ring in powerpc defconfigs

Token what? Lets save some space in our powerpc kernels and remove token
ring support.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc/defconfigs: Reduce 64bit vmlinux by making acenic and cramfs modules

Machines with acenic adapters are rare these days, so we may as well make it
a module. Cramfs is also very rarely used so we can make it a module.

Together this saves 143kB on a 64bit compile:

text data bss dec hex filename
8247176 1729404 1221988 11198568 aae068 vmlinux~
8134997 1727588 1188836 11051421 a8a19d vmlinux

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc: Turn on self-tests in ppc64_defconfig

Most of the code enabled by these options is __init, and it's much
more useful to actually run the tests.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

eeprom: More consistent symbol names

Now that all EEPROM drivers live in the same place, let's harmonize
their symbol names.

Also fix eeprom's dependencies, it definitely needs sysfs, and is no
longer experimental after many years in the kernel tree.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: David Brownell <dbrownell@users.sourceforge.net>

powerpc: Enable PS3 options and QPACE in ppc64_defconfig

To increase the amount of code that's built for a defconfig build.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc: Update desktop/server defconfigs

Turned off CONFIG_PCI_LEGACY and turned on EXT4, and otherwise mostly
took the defaults. This also updates ppc6xx_defconfig, which covers
the 6xx/7xx/7xxx-based embedded boards.

Signed-off-by: Paul Mackerras <paulus@samba.org>

powerpc: Update defconfigs for most non-embedded platforms

Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Turn on ATA_SFF so we get SATA_SVW back in defconfigs

This enables CONFIG_ATA_SFF in the defconfigs that are intended to
work on a G5 powermac, i.e. g5_defconfig and ppc64_defconfig. Since
the support for the SATA cell in the K2 chipset is provided by the
sata_svw.c driver, and that depends on CONFIG_ATA_SFF, we need to turn
that and CONFIG_SATA_SVW back on so we can get to the hard disk on G5s.

Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Update defconfigs for desktop/server systems

Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Remove CONFIG_PCI_LEGACY from some configs

This will remove some build warnings and doesn't stop us building any
drivers that we were building previously with these configs.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Update some defconfigs

Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Add EHEA and EHCA as modules in the ppc64_defconfig

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Update defconfigs

This updates all the defconfigs in arch/powerpc/configs except iseries
and ps3, which were updated by the preceding commits.

This mostly takes the defaults, except that I turned on tickless idle
and high-resolution timers for everything, and turned off instrumentation
support and "Fair group CPU scheduler" for the smaller/embedded platforms.

Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Refresh ppc64_defconfig and enable pasemi-related options

Refresh ppc64_defconfig, add PPC_PASEMI and various options that the
common boards there need:

* Chip drivers (iommu, ethernet, IDE, CF, EDAC, MDIO/PHY)
* PCMCIA
* PATA_PCMCIA
* RTC_CLASS
* SATA_MV
* SATA_SIL24
* IP_PNP + NFS_ROOT for diskless booting

+ possibly some other things I might have missed to list

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>

task cgroups: enable cgroups by default in some configs

In pre-cgroup cpusets, a few config files enabled cpusets by default.

Signed-off-by: Paul Jackson <pj@sgi.com>
Cc: Paul Menage <menage@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[POWERPC] Enable NO_HZ and high res timers for pseries and ppc64 configs

Enable NO_HZ and high res timers for the ppc64 and pseries defconfigs.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Enable SLUB in *_defconfig

When checking out the new NO_HZ support in powerpc, I noticed we never
slept for more than 2 seconds. It turns out SLAB has a 2 second per cpu
timer that causes this.

After switching to SLUB I see some nice 4 second sleeps which is the
limit on this POWER6 box (the decrementer ticks at 512MHz):

slept 4.19 sec
slept 4.19 sec
slept 4.19 sec
slept 4.19 sec
slept 3.96 sec
slept 3.80 sec
slept 2.99 sec

Since SLUB is now the default and some powerpc defconfigs already enable
it, lets enable SLUB across the board for consistency. While doing this
I also noticed that the maple defconfig has SLAB debugging enabled which
is sure to make your box nice and slow. Fix that too.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Update defconfigs

Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Update defconfigs

Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Rename MPIC_BROKEN_U3 to MPIC_U3_HT_IRQS

Rename MPIC_BROKEN_U3 to something a little more descriptive. Its
effect is to enable support for HT irqs behind the PCI-X/HT bridge on
U3/U4 (aka. CPC9x5) parts.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] use winbond libata instead of ide driver for pseries CD drives

Change the default for the built-in IDE on p610/p615/p630 from
ide to libata. libata has better error handling and the drive can
recover when hald does its CD media polling.

Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Update defconfigs

Mostly took the defaults, except tried to get the netfilter options
more or less as they were before.

Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Add legacy iSeries to ppc64_defconfig

Since we can now boot legacy iSeries and other machines with the same
config, enable legacy iSeries in ppc64_defconfig.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Update ppc64_defconfig

Enabled new netfilter stuff corresponding to what was enabled before
under different names, and turned on the gxt4500 video driver;
otherwise just took the defaults.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Change ppc64_defconfig to use AUTOFS_V4 not V3

Defconfig ppc64 kernels running under late-model distros
may hang in the automounter rc.d script, which seems to be
expecting autofs version 4. This patch uses the newer autofs.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] update powerpc defconfig files after libata kconfig breakage

Update defconfig files after libata .config breakage

sed -i 's/CONFIG_SCSI_SATA_/CONFIG_SATA_/;s/CONFIG_SCSI_SATA/CONFIG_ATA/' arch/powerpc/configs/*g

Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Update defconfigs

Signed-off-by: Paul Mackerras <paulus@samba.org>

[PATCH] powerpc/64: enable CONFIG_BLK_DEV_SL82C105

Enable the onboard IDE driver for p610, p615 and p630.
They have the CD connected to this card. All other RS/6000 systems with this
controller have no connectors and dont need this option.

Signed-off-by: Olaf Hering <olh@suse.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[PATCH] powerpc: Update {g5,pseries,ppc64}_defconfig

Update defconfigs for g5, pseries and generic ppc64. Default choices
for everything, with the following exceptions:

* Enable WINDFARM_PM112 on g5 and ppc64.
* Increase CONFIG_NR_CPUS to 4 in g5_defconfig
* CONFIG_TIGON3=y instead of =m in g5_defconfig

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[PATCH] e1000: Added disable packet split capability

Adds the ability to disability packet split at compile time and use the legacy receive path on PCI express hardware. Made this a CONFIG option and modified the Kconfig, to reflect the new option.

Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: John Ronciak <john.ronciak@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

[PATCH] enable the RTC driver in ppc64_defconfig

Enable the RTC driver.

Signed-off-by: Olaf Hering <olh@suse.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[PATCH] Serial: disable jsm in ppc64 defconfig

Changes to the serial driver to remove flip buffers have broken the serial
jsm driver. It doesn't even compile anymore. The jsm driver was enabled
in only one defconfig - ppc64. In order to keep defconfigs building,
disable CONFIG_SERIAL_JSM for the time being.

Signed-off-by: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

powerpc: update defconfigs

Signed-off-by: Paul Mackerras <paulus@samba.org>

powerpc: Move defconfig over and remove remaining arch/ppc64 files

make defconfig will now use arch/powerpc/configs/ppc64_defconfig
if running on a ppc64 system. I need to add an
arch/powerpc/configs/ppc_defconfig sometime.

Signed-off-by: Paul Mackerras <paulus@samba.org>