powerpc/configs: Update config files for removed/renamed symbols

Clean up config files by:
- removing configs that were deleted in the past
- removing configs not in tree and without recently pending patches
- adding new configs that are replacements for old configs in the file

For some detailed information, see:
https://lore.kernel.org/kernel-janitors/20220929090645.1389-1-lukas.bulwahn@gmail.com/

Renamed:
- CONFIG_PPC_PTDUMP -> CONFIG_GENERIC_PTDUMP
e084728393a5 ("powerpc/ptdump: Convert powerpc to GENERIC_PTDUMP")

Removed:
- CONFIG_BLK_DEV_CRYPTOLOOP
47e9624616c8 ("block: remove support for cryptoloop and the xor transfer")

- CONFIG_CRYPTO_RMD128
b21b9a5e0aef ("crypto: rmd128 - remove RIPE-MD 128 hash algorithm")

- CONFIG_CRYPTO_RMD256
c15d4167f0b0 ("crypto: rmd256 - remove RIPE-MD 256 hash algorithm")

- CONFIG_CRYPTO_RMD320
93f64202926f ("crypto: rmd320 - remove RIPE-MD 320 hash algorithm")

- CONFIG_CRYPTO_SALSA20
663f63ee6d9c ("crypto: salsa20 - remove Salsa20 stream cipher algorithm")

- CONFIG_CRYPTO_TGR192
87cd723f8978 ("crypto: tgr192 - remove Tiger 128/160/192 hash algorithms")

- CONFIG_HARDENED_USERCOPY_PAGESPAN
1109a5d90701 ("usercopy: Remove HARDENED_USERCOPY_PAGESPAN")

- CONFIG_RAPIDIO_TSI568, CONFIG_RAPIDIO_TSI57X
612d4904191f ("rapidio: remove not used code about RIO_VID_TUNDRA")

- CONFIG_RAW_DRIVER
603e4922f1c8 ("remove the raw driver")

- CONFIG_ROCKETPORT
3b00b6af7a5b ("tty: rocket, remove the driver")

- CONFIG_ENABLE_MUST_CHECK
196793946264 ("Compiler Attributes: remove CONFIG_ENABLE_MUST_CHECK")

Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
[mpe: Add documentation of relevant commit for each symbol change]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220929101502.32527-1-lukas.bulwahn@gmail.com

powerpc: Restore CONFIG_DEBUG_INFO in defconfigs

Commit f9b3cd245784 ("Kconfig.debug: make DEBUG_INFO selectable from a
choice") broke the selection of CONFIG_DEBUG_INFO by powerpc defconfigs.

It is now necessary to select one of the three DEBUG_INFO_DWARF*
options to get DEBUG_INFO enabled.

Replace DEBUG_INFO=y by DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y in all
defconfigs using the following command:

sed -i s/DEBUG_INFO=y/DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y/g `git grep -l DEBUG_INFO arch/powerpc/configs/`

Fixes: f9b3cd245784 ("Kconfig.debug: make DEBUG_INFO selectable from a choice")
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/98a4c2603bf9e4b776e219f5b8541d23aa24e854.1654930308.git.christophe.leroy@csgroup.eu

powerpc/configs: Regenerate mpc885_ads_defconfig

Regenerate atop v5.14-rc6 by doing a make savedefconfig.

The changes a re-ordering except for the following (which are still set
indirectly):

- CONFIG_DEBUG_KERNEL=y selected by EXPERT

- CONFIG_PPC_EARLY_DEBUG_CPM_ADDR=0xff002008 which is the default
setting

Signed-off-by: Joel Stanley <joel@jms.id.au>
Acked-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210817045407.2445664-4-joel@jms.id.au

powerpc/config: Renable MTD_PHYSMAP_OF

CONFIG_MTD_PHYSMAP_OF is not longer enabled as it depends on
MTD_PHYSMAP which is not enabled.

This is a regression from commit 642b1e8dbed7 ("mtd: maps: Merge
physmap_of.c into physmap-core.c"), which added the extra dependency.
Add CONFIG_MTD_PHYSMAP=y so this stays in the config, as Christophe said
it is useful for build coverage.

Fixes: 642b1e8dbed7 ("mtd: maps: Merge physmap_of.c into physmap-core.c")
Signed-off-by: Joel Stanley <joel@jms.id.au>
Acked-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210817045407.2445664-3-joel@jms.id.au

powerpc/config: Fix IPV6 warning in mpc855_ads

When building this config there's a warning:

79:warning: override: reassigning to symbol IPV6

Commit 9a1762a4a4ff ("powerpc/8xx: Update mpc885_ads_defconfig to
improve CI") added CONFIG_IPV6=y, but left '# CONFIG_IPV6 is not set'
in.

IPV6 is default y, so remove both to clean up the build.

Fixes: 9a1762a4a4ff ("powerpc/8xx: Update mpc885_ads_defconfig to improve CI")
Signed-off-by: Joel Stanley <joel@jms.id.au>
Acked-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210817045407.2445664-2-joel@jms.id.au

powerpc/8xx: Update mpc885_ads_defconfig to improve CI

mpc885_ads_defconfig is used by several CI robots.

A few functionnalities are specific to 8xx and are not covered
by other default configuration, so improve build test coverage
by adding them to mpc885_ads_defconfig.

8xx is the only platform supporting 16k page size in addition
to 4k page size. Considering that 4k page size is widely tested
by other configurations, lets make 16k pages the selection for
8xx, as it has demonstrated in the past to be a weakness.

CONFIG_PIN_TLB is specific to 8xx, select it as it mainly adds
code with removing much.

CONFIG_BDI_SWITCH is specific to PPC32 and adds codes.

CONFIG_PPC_PTDUMP has specific part for 8xx.

CONFIG_MODULES has specific handling for 8xx.

CONFIG_SMC_UCODE_PATCH is specific to 8xx for loading microcode.

CONFIG_PERF_EVENTS has specific parts for 8xx.

CONFIG_MATH_EMULATION is used by 8xx.

CONFIG_STRICT_KERNEL_RWX has specificities for 8xx.

CONFIG_VIRT_CPU_ACCOUNTING_NATIVE has specific parts for PPC32.

CONFIG_IPV6 has specificities for PPC32.

CONFIG_BPF_JIT has specificities for PPC32.

A few drivers are tightly linked to the 8xx:
- CONFIG_SPI_FSL_SPI
- CONFIG_CRYPTO_DEV_TALITOS
- CONFIG_8xxx_WDT
- CONFIG_8xx_GPIO
- CONFIG_PPC_EARLY_DEBUG_CPM

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/2541e4e415505b27db8ccbb8977035c20e408ef4.1620405461.git.christophe.leroy@csgroup.eu

powerpc/8xx: Drop CONFIG_8xx_COPYBACK option

CONFIG_8xx_COPYBACK was there to help disabling copyback cache mode
for debuging hardware. But nobody will design new boards with 8xx now.

All 8xx platforms select it, so make it the default and remove
the option.

Also remove the Mx_RESETVAL values which are pretty useless and hide
the real value while reading code.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/bcc968cda075516eb76e2f25e09821f582c566b4.1589866984.git.christophe.leroy@csgroup.eu

powerpc: configs: Cleanup old Kconfig options

CONFIG_ENABLE_WARN_DEPRECATED is gone since
commit 771c035372a0 ("deprecate the '__deprecated' attribute warnings
entirely and for good").

CONFIG_IOSCHED_DEADLINE and CONFIG_IOSCHED_CFQ are gone since
commit f382fb0bcef4 ("block: remove legacy IO schedulers").

The IOSCHED_DEADLINE was replaced by MQ_IOSCHED_DEADLINE and it will be
now enabled by default (along with MQ_IOSCHED_KYBER).

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200130195223.3843-1-krzk@kernel.org

powerpc/configs: remove obsolete CONFIG_INET_XFRM_MODE_* and CONFIG_INET6_XFRM_MODE_*

These Kconfig options has been removed in commit 4c145dce2601 ("xfrm:
make xfrm modes builtin") So there is no point to keep it in
defconfigs any longer.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
[mpe: Extract from cross arch patch]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190612071901.21736-1-yuehaibing@huawei.com

powerpc/configs: Remove useless UEVENT_HELPER_PATH

Remove the CONFIG_UEVENT_HELPER_PATH because:
1. It is disabled since commit 1be01d4a5714 ("driver: base: Disable
CONFIG_UEVENT_HELPER by default") as its dependency (UEVENT_HELPER) was
made default to 'n',
2. It is not recommended (help message: "This should not be used today
[...] creates a high system load") and was kept only for ancient
userland,
3. Certain userland specifically requests it to be disabled (systemd
README: "Legacy hotplug slows down the system and confuses udev").

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/configs: Update for symbol movement only

Update defconfigs for symbols that have moved around, without their
value changing.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/configs: Remove old symbols from defconfigs

Update defconfigs to remove old symbols and comments referencing old
symbols.

Dropped:

* AVERAGE
* INET_LRO
* EXT3_DEFAULTS_TO_ORDERED
* EXT3_FS_XATTR
* I2O
* INFINIBAND_AMSO1100
* INFINIBAND_EHCA
* IP1000

Replaced:

* BLK_DEV_XIP -> BLK_DEV_RAM_DAX
* CLK_PPC_CORENET -> CLK_QORIQ
* EXT2_FS_XIP -> FS_DAX
* EXT3_FS* -> EXT4_FS*

Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc: Update all configs using savedefconfig

It looks like it's ~4 years since we updated some of these, so do a bulk
update.

Verified that the before and after generated configs are exactly the
same.

Which begs the question why update them? The answer is that it can be
confusing when the stored defconfig drifts too far from the generated
result.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc 8xx: defconfig: slice by 4 is more efficient than the default slice by 8 on Powerpc 8xx.

On PPC_8xx, CRC32_SLICEBY4 is more efficient (almost twice) than CRC32_SLICEBY8,
as shown below:

With CRC32_SLICEBY8:
[ 1.109204] crc32: CRC_LE_BITS = 64, CRC_BE BITS = 64
[ 1.114401] crc32: self tests passed, processed 225944 bytes in 15118910 nsec
[ 1.130655] crc32c: CRC_LE_BITS = 64
[ 1.134235] crc32c: self tests passed, processed 225944 bytes in 4479879 nsec

With CRC32_SLICEBY4:
[ 1.097129] crc32: CRC_LE_BITS = 32, CRC_BE BITS = 32
[ 1.101878] crc32: self tests passed, processed 225944 bytes in 8616242 nsec
[ 1.116298] crc32c: CRC_LE_BITS = 32
[ 1.119607] crc32c: self tests passed, processed 225944 bytes in 3289576 nsec

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Scott Wood <scottwood@freescale.com>

kconfig: rename CONFIG_EMBEDDED to CONFIG_EXPERT

The meaning of CONFIG_EMBEDDED has long since been obsoleted; the option
is used to configure any non-standard kernel with a much larger scope than
only small devices.

This patch renames the option to CONFIG_EXPERT in init/Kconfig and fixes
references to the option throughout the kernel. A new CONFIG_EMBEDDED
option is added that automatically selects CONFIG_EXPERT when enabled and
can be used in the future to isolate options that should only be
considered for embedded systems (RISC architectures, SLOB, etc).

Calling the option "EXPERT" more accurately represents its intention: only
expert users who understand the impact of the configuration changes they
are making should enable it.

Reviewed-by: Ingo Molnar <mingo@elte.hu>
Acked-by: David Woodhouse <david.woodhouse@intel.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Greg KH <gregkh@suse.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Robin Holt <holt@sgi.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

powerpc: Trim defconfigs

This trims all our defconfigs using make savedefconfig

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc: 2.6.34 update of defconfigs for embedded 6xx/7xxx, 8xx, 8xxx

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

powerpc/mpc8xxx defconfigs - turn off SYSFS_DEPRECATED

a recent fc11 udev update on an 83xx board made root console login
disappear:

Updating : udev-141-8.fc11.ppc 32/83
udev: starting version 141
udev: deprecated sysfs layout; update the kernel or disable CONFIG_SYSFS_DEPRECATED;
some udev features will not work correctly

and sure enough, turning off SYSFS_DEPRECATED brings the login prompt back.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

powerpc: 2.6.33 update of defconfigs for embedded 6xx/7xxx, 8xx, 8xxx

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

powerpc: 2.6.32 update of defconfigs for embedded 6xx/7xxx, 8xx, 8{3,5,6}xxx

Updated mpc85xx_{smp_}defconfig to enable:
* XES_MPC85xx board
* PCI MSI
* RapidIO

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

powerpc: Update defconfigs for embedded 6xx/7xxx, 8xx, 8{3,5,6}xxx

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

powerpc/8xx: Update defconfigs

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

powerpc/8xx: Update defconfigs

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

powerpc: Updated Freescale PPC related defconfigs

unset CONFIG_PCI_LEGACY in the defconfigs as none of them enable
ISDN drivers which seem to be the only place we are using pci_find_device

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

powerpc: Update defconfigs for FSL PPC boards

Since we are updated defconfigs I went ahead and moved the
asp8347_defconfig under 83xx/ and the mpc8536_ds_defconfig under
85xx/ as that is where they should have been to start with.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

[POWERPC] Updated Freescale PPC defconfigs

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

[POWERPC] Update some defconfigs

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

[POWERPC] Update defconfigs

This updates all the defconfigs in arch/powerpc/configs except iseries
and ps3, which were updated by the preceding commits.

This mostly takes the defaults, except that I turned on tickless idle
and high-resolution timers for everything, and turned off instrumentation
support and "Fair group CPU scheduler" for the smaller/embedded platforms.

Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] 8xx: mpc885ads cleanup

It now uses the new CPM binding and the generic pin/clock functions, and
has assorted fixes and cleanup.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

[POWERPC] Update defconfigs

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

[POWERPC] Update defconfigs

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

[POWERPC] 8xx: Add mpc885ads support and common mpc8xx files

This adds the core 8xx stuff and specifically mpc885ads board-specific
bits to arch/powerpc. Respective Kconfig has been cleaned up from the stuff
not yet ported over to avoid confusion. Updated and cleaned version.

Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>