powerpc: Restore CONFIG_DEBUG_INFO in defconfigs

Commit f9b3cd245784 ("Kconfig.debug: make DEBUG_INFO selectable from a
choice") broke the selection of CONFIG_DEBUG_INFO by powerpc defconfigs.

It is now necessary to select one of the three DEBUG_INFO_DWARF*
options to get DEBUG_INFO enabled.

Replace DEBUG_INFO=y by DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y in all
defconfigs using the following command:

sed -i s/DEBUG_INFO=y/DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y/g `git grep -l DEBUG_INFO arch/powerpc/configs/`

Fixes: f9b3cd245784 ("Kconfig.debug: make DEBUG_INFO selectable from a choice")
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/98a4c2603bf9e4b776e219f5b8541d23aa24e854.1654930308.git.christophe.leroy@csgroup.eu

powerpc/sysdev: drop simple gpio

There is a config item CONFIG_SIMPLE_GPIO which
provides simple memory mapped GPIOs specific to powerpc.

However, the only platform which selects this option is
mpc5200, and this platform doesn't use it.

There are three boards calling simple_gpiochip_init(), but
as they don't select CONFIG_SIMPLE_GPIO, this is just a nop.

Simple_gpio is just redundant with the generic MMIO GPIO
driver which can be found in driver/gpio/ and selected via
CONFIG_GPIO_GENERIC_PLATFORM, so drop simple_gpio driver.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/bf930402613b41b42d0441b784e0cc43fc18d1fb.1572529632.git.christophe.leroy@c-s.fr

powerpc/configs: Remove useless UEVENT_HELPER_PATH

Remove the CONFIG_UEVENT_HELPER_PATH because:
1. It is disabled since commit 1be01d4a5714 ("driver: base: Disable
CONFIG_UEVENT_HELPER by default") as its dependency (UEVENT_HELPER) was
made default to 'n',
2. It is not recommended (help message: "This should not be used today
[...] creates a high system load") and was kept only for ancient
userland,
3. Certain userland specifically requests it to be disabled (systemd
README: "Legacy hotplug slows down the system and confuses udev").

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/configs/mpc5200: Drop no longer needed CONFIG_FB

Since commit a03fdcb18632 ("drm: Add top level Kconfig option for DRM
fbdev emulation") we no longer need to set CONFIG_FB in our
defconfigs.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/configs: Update for CONFIG_FIXED_PHY being selected by CONFIG_OF_MDIO

In commit a5e4bd991362 ("of_mdio: select fixed phy support
unconditionally"), CONFIG_OF_MDIO began selecting CONFIG_FIXED_PHY.

That means we no longer need to set it some of our defconfigs.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/configs: Drop unneeded CONFIG_CRYPTO_ANSI_CPRNG

Since commit 401e4238f35c ("crypto: rng - Make DRBG the default RNG") we no longer need to set CONFIG_CRYPTO_ANSI_CPRNG in our defconfigs.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/configs: Remove old symbols from defconfigs

Update defconfigs to remove old symbols and comments referencing old
symbols.

Dropped:

* AVERAGE
* INET_LRO
* EXT3_DEFAULTS_TO_ORDERED
* EXT3_FS_XATTR
* I2O
* INFINIBAND_AMSO1100
* INFINIBAND_EHCA
* IP1000

Replaced:

* BLK_DEV_XIP -> BLK_DEV_RAM_DAX
* CLK_PPC_CORENET -> CLK_QORIQ
* EXT2_FS_XIP -> FS_DAX
* EXT3_FS* -> EXT4_FS*

Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc: Update all configs using savedefconfig

It looks like it's ~4 years since we updated some of these, so do a bulk
update.

Verified that the before and after generated configs are exactly the
same.

Which begs the question why update them? The answer is that it can be
confusing when the stored defconfig drifts too far from the generated
result.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

tgt: defconfig cleanup

Because of the removal of the scsi_tgt kernel module, the kbuild variables
CONFIG_SCSI_TGT, CONFIG_SCSI_SRP_TGT_ATTRS and CONFIG_SCSI_FC_TGT_ATTRS
are obsolete. This patch removes these variables. This patch is the result
of the following command:

find -name '*defconfig' | while read f; do grep -vwE 'CONFIG_SCSI_TGT|CONFIG_SCSI_SRP_TGT_ATTRS|CONFIG_SCSI_FC_TGT_ATTRS|CONFIG_SRP' $f >/tmp/t && mv /tmp/t $f; done

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>

USB: delete CONFIG_USB_DEVICEFS from defconfig

It no longer occurs in Kconfig.
USB: remove CONFIG_USB_DEVICEFS(fb28d58b) leaked remove defconfig.

Signed-off-by: Naoki MATSUMOTO <nekomatu+linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/52xx: Re-enable bestcomm driver in defconfigs

The bestcomm driver has been moved to drivers/dma, so to select
this driver by default additionally CONFIG_DMADEVICES has to be
enabled. Currently it is not enabled in the config despite existing
CONFIG_PPC_BESTCOMM=y in the config files. Fix it.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc/mpc5200: add options to mpc5200_defconfig

Add the following options to the mpc5200_defconfig, needed
for the a4m072 board support:

CONFIG_AMD_PHY=y
CONFIG_GPIO_SYSFS=y
CONFIG_SENSORS_LM87=m
CONFIG_RTC_DRV_PCF8563=m

Signed-off-by: Heiko Schocher <hs@denx.de>
cc: Wolfgang Denk <wd@denx.de>
Signed-off-by: Anatolij Gustschin <agust@denx.de>

powerpc/mpc5200: update mpc5200_defconfig to fit for charon board

Add following options to mpc5200_defconfig:

- CONFIG_MTD_PLATRAM=y
(selects CONFIG_MTD_RAM, so this is removed)
- CONFIG_FIXED_PHY=y
- CONFIG_SENSORS_LM80=y
- CONFIG_FB_FOREIGN_ENDIAN=y
- CONFIG_FB_SM501=m
- CONFIG_RTC_DRV_DS1374=y

Signed-off-by: Heiko Schocher <hs@denx.de>
cc: Grant Likely <grant.likely@secretlab.ca>
cc: Wolfgang Denk <wd@denx.de>
Signed-off-by: Anatolij Gustschin <agust@denx.de>

powerpc/5200: enable audio in the defconfig

Audio support for the MPC5200 exists, so enable it by default.

Signed-off-by: Timur Tabi <timur@freescale.com>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Anatolij Gustschin <agust@denx.de>

powerpc: Restore some misc devices to our configs

Uwe Kleine-König reported:

while working on an defconfig (arm/mx27) I noticed that just updating
it[1] results in removing CONFIG_EEPROM_AT24=y. The reason is that
since commit

v2.6.36-5965-g5f2365d (misc devices: do not enable by default)

MISC_DEVICES isn't enabled anymore by default. So all defconfigs that
have CONFIG_SOME_SYMBOL=y (or =m) (with SOME_SYMBOL depending on
MISC_DEVICES) but not CONFIG_MISC_DEVICES=y suffer from the same
problem.

This restores those misc devices to the powerpc defconfigs.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de
Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Acked-by: Uwe Kleine-König
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc: Trim defconfigs

This trims all our defconfigs using make savedefconfig

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc: Disable CONFIG_SYSFS_DEPRECATED

Acked-by: Grant Likely <grant.likely@secretlab.ca>

On 5 May 2010 21:33, "Anton Blanchard" <anton@samba.org> wrote:

CONFIG_SYSFS_DEPRECATED can cause issues with newer distros and should not
be required for any distro in the last 3 or 4 years, so disable it.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc/52xx: update defconfigs

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

powerpc/5200: update defconfigs

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

powerpc/5200: Update defconfigs

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

mpc5200: support for the MAN mpc5200 based board mucmc52

- serial Console on PSC1
- 64MB SDRAM
- MTD CFI Flash
- Ethernet FEC
- IDE support

Signed-off-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

powerpc/5200: defconfig updates

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

powerpc/5200: Add digsy-mtc support to mpc5200_defconfig

The following options are enabled to support the digsy-mtc.
- LXT phy
- AT24 eeprom
- RTC (DS1337)
- MTD partitioning based on OF description

Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

powerpc/5200: update defconfigs

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

eeprom: More consistent symbol names

Now that all EEPROM drivers live in the same place, let's harmonize
their symbol names.

Also fix eeprom's dependencies, it definitely needs sysfs, and is no
longer experimental after many years in the kernel tree.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: David Brownell <dbrownell@users.sourceforge.net>

powerpc/52xx: update defconfigs

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

[POWERPC] mpc5200: merge defconfigs for all mpc5200 boards

There is no reason to have separate defconfigs for each mpc5200 board.
Instead, here is a common defconfig that can be used for all supported
platforms.

Merging the defconfigs means there are fewer configuration to test when
compile testing all of arch/powerpc and should make support easier.

Supported boards:
Lite5200(b), Efika, TQM5200, CM5200, MotionPro

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>