powerpc/configs: Remove ReiserFS from defconfig

ReiserFS has been deprecated for a year and a half, yet is still built
as part of a defconfig kernel.

According to commit eb103a51640e ("reiserfs: Deprecate reiserfs"), the
filesystem is slated to be removed in 2025. Remove it from the defconfig
profiles now, as part of its deprecation process.

Signed-off-by: Peter Lafreniere <peter@n8pjl.ca>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230918175529.19011-3-peter@n8pjl.ca

powerpc/configs: Update config files for removed/renamed symbols

Clean up config files by:
- removing configs that were deleted in the past
- removing configs not in tree and without recently pending patches
- adding new configs that are replacements for old configs in the file

For some detailed information, see:
https://lore.kernel.org/kernel-janitors/20220929090645.1389-1-lukas.bulwahn@gmail.com/

Renamed:
- CONFIG_PPC_PTDUMP -> CONFIG_GENERIC_PTDUMP
e084728393a5 ("powerpc/ptdump: Convert powerpc to GENERIC_PTDUMP")

Removed:
- CONFIG_BLK_DEV_CRYPTOLOOP
47e9624616c8 ("block: remove support for cryptoloop and the xor transfer")

- CONFIG_CRYPTO_RMD128
b21b9a5e0aef ("crypto: rmd128 - remove RIPE-MD 128 hash algorithm")

- CONFIG_CRYPTO_RMD256
c15d4167f0b0 ("crypto: rmd256 - remove RIPE-MD 256 hash algorithm")

- CONFIG_CRYPTO_RMD320
93f64202926f ("crypto: rmd320 - remove RIPE-MD 320 hash algorithm")

- CONFIG_CRYPTO_SALSA20
663f63ee6d9c ("crypto: salsa20 - remove Salsa20 stream cipher algorithm")

- CONFIG_CRYPTO_TGR192
87cd723f8978 ("crypto: tgr192 - remove Tiger 128/160/192 hash algorithms")

- CONFIG_HARDENED_USERCOPY_PAGESPAN
1109a5d90701 ("usercopy: Remove HARDENED_USERCOPY_PAGESPAN")

- CONFIG_RAPIDIO_TSI568, CONFIG_RAPIDIO_TSI57X
612d4904191f ("rapidio: remove not used code about RIO_VID_TUNDRA")

- CONFIG_RAW_DRIVER
603e4922f1c8 ("remove the raw driver")

- CONFIG_ROCKETPORT
3b00b6af7a5b ("tty: rocket, remove the driver")

- CONFIG_ENABLE_MUST_CHECK
196793946264 ("Compiler Attributes: remove CONFIG_ENABLE_MUST_CHECK")

Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
[mpe: Add documentation of relevant commit for each symbol change]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220929101502.32527-1-lukas.bulwahn@gmail.com

powerpc/64s: Default to 64K pages for 64 bit book3s

For 64-bit book3s the default should be 64K as that's what modern CPUs
are designed for.

The following defconfigs already set CONFIG_PPC_64K_PAGES:

cell_defconfig
pasemi_defconfig
powernv_defconfig
ppc64_defconfig
pseries_defconfig
skiroot_defconfig

The have the option removed from the defconfig, as it is now the
default.

The defconfigs that now need to set CONFIG_PPC_4K_PAGES to maintain
their existing behaviour are:

g5_defconfig
maple_defconfig
microwatt_defconfig
ps3_defconfig

Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
BugLink: https://github.com/linuxppc/issues/issues/109
Link: https://lore.kernel.org/r/20211015001649.45591-1-joel@jms.id.au

arch: powerpc: Stop building and using oprofile

The "oprofile" user-space tools don't use the kernel OPROFILE support
any more, and haven't in a long time. User-space has been converted to
the perf interfaces.

This commits stops building oprofile for powerpc and removes any
reference to it from directories in arch/powerpc/ apart from
arch/powerpc/oprofile, which will be removed in the next commit (this is
broken into two commits as the size of the commit became very big, ~5k
lines).

Note that the member "oprofile_cpu_type" in "struct cpu_spec" isn't
removed as it was also used by other parts of the code.

Suggested-by: Christoph Hellwig <hch@infradead.org>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Robert Richter <rric@kernel.org>
Acked-by: William Cohen <wcohen@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Thomas Gleixner <tglx@linutronix.de>

USB: serial: keyspan_pda: clean up xircom/entrega support

Drop the separate Kconfig symbol for Xircom / Entrega and always include
support in the keyspan_pda driver.

Note that all configs that enabled CONFIG_USB_SERIAL_XIRCOM also enable
CONFIG_USB_SERIAL_KEYSPAN_PDA.

Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>

powerpc/configs: Remove dead symbols

Remove references to symbols that no longer exist as reported by
scripts/checkkconfigsymbols.py.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200724131728.1643966-2-mpe@ellerman.id.au

scsi: sr: remove references to BLK_DEV_SR_VENDOR, leave it enabled

This kernel configuration is basically enabling/disabling sr driver quirks
detection. While these quirks are for fairly rare devices (very old CD
burners, and a glucometer), the additional detection of these models is a
very minimal amount of code.

The logic behind the quirks is always built into the sr driver.

This also removes the config from all the defconfig files that are enabling
this already.

Link: https://lore.kernel.org/r/20200223191144.726-1-flameeyes@flameeyes.com
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Diego Elio Pettenò <flameeyes@flameeyes.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

powerpc/configs: Disable latencytop

latencytop adds almost 4kB to each and every task struct and as such
it doesn't deserve to be in our defconfigs.

Signed-off-by: Anton Blanchard <anton@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/configs: Remove useless UEVENT_HELPER_PATH

Remove the CONFIG_UEVENT_HELPER_PATH because:
1. It is disabled since commit 1be01d4a5714 ("driver: base: Disable
CONFIG_UEVENT_HELPER by default") as its dependency (UEVENT_HELPER) was
made default to 'n',
2. It is not recommended (help message: "This should not be used today
[...] creates a high system load") and was kept only for ancient
userland,
3. Certain userland specifically requests it to be disabled (systemd
README: "Legacy hotplug slows down the system and confuses udev").

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/configs: Don't enable PPC_EARLY_DEBUG in defconfigs

This reverts the remains of commit b9ef7d6b11c1 ("powerpc: Update
default configurations").

That commit was proceeded by a commit which added a config option to
control use of BOOTX for early debug, ie. PPC_EARLY_DEBUG_BOOTX, and
then the update of the defconfigs was intended to not change behaviour
by then enabling the new config option.

However enabling PPC_EARLY_DEBUG had other consequences, notably
causing us to register the udbg console at the end of udbg_early_init().

This means on a system which doesn't have anything that BOOTX can
use (most systems), we register the udbg console very early but the
bootx code just throws everything away, meaning early boot messages
are never printed to the console.

What we want to happen is for the udbg console to only be registered
later (from setup_arch()) once we've setup udbg_putc, and then all
early boot messages will be replayed.

Fixes: b9ef7d6b11c1 ("powerpc: Update default configurations")
Reported-by: Torsten Duwe <duwe@lst.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/config: Enable CONFIG_PRINTK_TIME

for 64bit configs which use for CONFIG_LOG_BUF_SHIFT the same
or higher value than the default (currently 17).

Signed-off-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

USB: serial: keyspan: Drop firmware Kconfig options

The USB_SERIAL_KEYSPAN_* firmware options no longer do anything.

Fixes: 5620a0d1aacd ("firmware: delete in-kernel firmware")
Signed-off-by: Benjamin Gilbert <benjamin.gilbert@coreos.com>
Cc: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/configs: Update for CONFIG_SND changes

Commit eb3b705aaed9 ("ALSA: Make CONFIG_SND_OSSEMUL user-selectable")
means we need to set CONFIG_SND_OSSEMUL in our configs, otherwise we
lose some of the SND symbols.

And commit 0181307abc1d ("ALSA: seq: Reorganize kconfig and build")
reorganised things, which causes the churn.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/configs: Drop no longer needed CONFIG_CRYPTO_NULL in g5 / c2k

Since commit 3491244c6298 ("crypto: echainiv - Set Kconfig default to
m") we no longer need to set CONFIG_CRYPTO_NULL in our defconfigs.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/configs: Update for CONFIG_DEBUG_FS being selected via CONFIG_RCU_TRACE

In commit 961518259b3b ("rcu: Enable RCU tracepoints by default to aid
in debugging"), CONFIG_RCU_TRACE was made default y (if CONFIG_TREE_RCU=y,
which it is for some of our configs).

That in turn causes CONFIG_TREE_RCU_TRACE to be enabled, which selects
CONFIG_DEBUG_FS. The end result is that CONFIG_DEBUG_FS is forced on,
meaning we don't have to enable it in some of our configs.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/configs: Drop no longer needed CONFIG_FHANDLE

Since commit f76be61755c5 ("Make CONFIG_FHANDLE default y") we no
longer need to set CONFIG_FHANDLE in our defconfigs.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/configs: Explicitly drop CONFIG_INPUT_MOUSEDEV

In commit 73d8ef76006b ("Input: mousedev - stop offering PS/2 to userspace by
default") (Jan 2017), CONFIG_INPUT_MOUSEDEV was switched from default y to
default n, with the explanation:

Evdev interface has been available for many years and by now everyone
is switched to using it, so let's stop offering /dev/input/mouseN
and /dev/psaux by default.

We had a number of configs which had it enabled, but going by the above
explanation probably don't need it enabled anymore.

So drop the last remnants of it from our defconfigs.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/configs: Drop unneeded CONFIG_CRYPTO_ANSI_CPRNG

Since commit 401e4238f35c ("crypto: rng - Make DRBG the default RNG") we no longer need to set CONFIG_CRYPTO_ANSI_CPRNG in our defconfigs.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/configs: Update for symbol movement only

Update defconfigs for symbols that have moved around, without their
value changing.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc: convert g5_defconfig to use libata PATA drivers

IDE subsystem has been deprecated since 2009 and the majority
(if not all) of Linux distributions have switched to use
libata for ATA support exclusively. However there are still
some users (mostly old or/and embedded non-x86 systems) that
have not converted from using IDE subsystem to libata PATA
drivers. This doesn't seem to be good thing in the long-term
for Linux as while there is less and less PATA systems left
in use:

* testing efforts are divided between two subsystems

* having duplicate drivers for same hardware confuses users

This patch converts g5_defconfig to use libata PATA drivers.

Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

powerpc/configs: Remove old symbols from defconfigs

Update defconfigs to remove old symbols and comments referencing old
symbols.

Dropped:

* AVERAGE
* INET_LRO
* EXT3_DEFAULTS_TO_ORDERED
* EXT3_FS_XATTR
* I2O
* INFINIBAND_AMSO1100
* INFINIBAND_EHCA
* IP1000

Replaced:

* BLK_DEV_XIP -> BLK_DEV_RAM_DAX
* CLK_PPC_CORENET -> CLK_QORIQ
* EXT2_FS_XIP -> FS_DAX
* EXT3_FS* -> EXT4_FS*

Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc: Update G5 defconfig

Add CGROUPS and DEVTMPFS, which allows booting with newer userspaces.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc: Update all configs using savedefconfig

It looks like it's ~4 years since we updated some of these, so do a bulk
update.

Verified that the before and after generated configs are exactly the
same.

Which begs the question why update them? The answer is that it can be
confusing when the stored defconfig drifts too far from the generated
result.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc: Don't build powernv for other platform defconfigs

Because powernv arrived after these other platforms, the defconfigs
didn't have PPC_POWERNV disabled, and being default y it gets turned on.

If we're going to bother having defconfigs for the specific platforms
then they should only build the code required for those platforms.

The grab bag of everything config is ppc64_defconfig.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc: Make CONFIG_FHANDLE=y for all 64 bit powerpc defconfigs

CONFIG_FHANDLE is a requirement for systemd and with the increasing
uptake of systemd within distros it makes sense for 64 bit defconfigs
to include it.

Signed-off-by: Cyril Bur <cyril.bur@au1.ibm.com>

USB: delete CONFIG_USB_DEVICEFS from defconfig

It no longer occurs in Kconfig.
USB: remove CONFIG_USB_DEVICEFS(fb28d58b) leaked remove defconfig.

Signed-off-by: Naoki MATSUMOTO <nekomatu+linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc: Update default configurations

Update default configurations for systems with CONFIG_BOOTX_TEXT
selected so that they continue to print early debug messages as is
currently the case.

Signed-off-by: Alistair Popple <alistair@popple.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Revert "powerpc: Update g5_defconfig"

This reverts commit b1acf1bb544cf28c1f4be0a45620fa899c74b7e9.

Something went horribly wrong when I did savedefconfig, not sure what,
but what's in there is busted so let's revert it.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc: Update g5_defconfig

This updates the g5 defconfig to include nouveau instead of nvidiafb
(which works much better nowadays, in fact the latter crashes on modern
distros), and to set CONFIG_VT_HW_CONSOLE_BINDING without which takeover
from the firmware offb by nouveau doesn't work properly (and leads to
unexplained black screens for some users).

The rest is churn of going through defconfig / savedefconfig

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc: Remove CONFIG_POWER4_ONLY

Remove CONFIG_POWER4_ONLY, the option is badly named and only does two
things:

- It wraps the MMU segment table code. With feature fixups there is
little downside to compiling this in.

- It uses the newer mtocrf instruction in various assembly functions.
Instead of making this a compile option just do it at runtime via
a feature fixup.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc: Trim defconfigs

This trims all our defconfigs using make savedefconfig

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc: Disable CONFIG_SYSFS_DEPRECATED

Acked-by: Grant Likely <grant.likely@secretlab.ca>

On 5 May 2010 21:33, "Anton Blanchard" <anton@samba.org> wrote:

CONFIG_SYSFS_DEPRECATED can cause issues with newer distros and should not
be required for any distro in the last 3 or 4 years, so disable it.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc/defconfigs: Disable token ring in powerpc defconfigs

Token what? Lets save some space in our powerpc kernels and remove token
ring support.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc/defconfigs: Reduce 64bit vmlinux by making acenic and cramfs modules

Machines with acenic adapters are rare these days, so we may as well make it
a module. Cramfs is also very rarely used so we can make it a module.

Together this saves 143kB on a 64bit compile:

text data bss dec hex filename
8247176 1729404 1221988 11198568 aae068 vmlinux~
8134997 1727588 1188836 11051421 a8a19d vmlinux

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

eeprom: More consistent symbol names

Now that all EEPROM drivers live in the same place, let's harmonize
their symbol names.

Also fix eeprom's dependencies, it definitely needs sysfs, and is no
longer experimental after many years in the kernel tree.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: David Brownell <dbrownell@users.sourceforge.net>

powerpc: Update desktop/server defconfigs

Turned off CONFIG_PCI_LEGACY and turned on EXT4, and otherwise mostly
took the defaults. This also updates ppc6xx_defconfig, which covers
the 6xx/7xx/7xxx-based embedded boards.

Signed-off-by: Paul Mackerras <paulus@samba.org>

powerpc: Update defconfigs for most non-embedded platforms

Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Turn on ATA_SFF so we get SATA_SVW back in defconfigs

This enables CONFIG_ATA_SFF in the defconfigs that are intended to
work on a G5 powermac, i.e. g5_defconfig and ppc64_defconfig. Since
the support for the SATA cell in the K2 chipset is provided by the
sata_svw.c driver, and that depends on CONFIG_ATA_SFF, we need to turn
that and CONFIG_SATA_SVW back on so we can get to the hard disk on G5s.

Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Update defconfigs for desktop/server systems

Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] windfarm: Add PowerMac 12,1 support

This implements a new driver named windfarm_pm121, which drives the
fans on PowerMac 12,1 machines : iMac G5 iSight (rev C) 17" and
20". It's based on the windfarm_pm81 driver from Benjamin
Herrenschmidt.

This includes fixes from David Woodhouse correcting the names of some
of the sensors.

Signed-off-by: Étienne Bersac <bersace@gmail.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Remove CONFIG_PCI_LEGACY from some configs

This will remove some build warnings and doesn't stop us building any
drivers that we were building previously with these configs.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Update some defconfigs

Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Update defconfigs

This updates all the defconfigs in arch/powerpc/configs except iseries
and ps3, which were updated by the preceding commits.

This mostly takes the defaults, except that I turned on tickless idle
and high-resolution timers for everything, and turned off instrumentation
support and "Fair group CPU scheduler" for the smaller/embedded platforms.

Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Enable SLUB in *_defconfig

When checking out the new NO_HZ support in powerpc, I noticed we never
slept for more than 2 seconds. It turns out SLAB has a 2 second per cpu
timer that causes this.

After switching to SLUB I see some nice 4 second sleeps which is the
limit on this POWER6 box (the decrementer ticks at 512MHz):

slept 4.19 sec
slept 4.19 sec
slept 4.19 sec
slept 4.19 sec
slept 3.96 sec
slept 3.80 sec
slept 2.99 sec

Since SLUB is now the default and some powerpc defconfigs already enable
it, lets enable SLUB across the board for consistency. While doing this
I also noticed that the maple defconfig has SLAB debugging enabled which
is sure to make your box nice and slow. Fix that too.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Update defconfigs

Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Update defconfigs

Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Update g5_defconfig

Update the g5_defconfig with default settings.
This is to keep things up to date, and specifically to ensure that the
CONFIG_MACINTOSH_DRIVERS option is enabled. This also turns on
CONFIG_MSI.

Signed-off-by: Will Schmidt <will_schmidt@vnet.ibm.com>
cc: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Rename MPIC_BROKEN_U3 to MPIC_U3_HT_IRQS

Rename MPIC_BROKEN_U3 to something a little more descriptive. Its
effect is to enable support for HT irqs behind the PCI-X/HT bridge on
U3/U4 (aka. CPC9x5) parts.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Update defconfigs

Mostly took the defaults, except tried to get the netfilter options
more or less as they were before.

Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] update powerpc defconfig files after libata kconfig breakage

Update defconfig files after libata .config breakage

sed -i 's/CONFIG_SCSI_SATA_/CONFIG_SATA_/;s/CONFIG_SCSI_SATA/CONFIG_ATA/' arch/powerpc/configs/*g

Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Update defconfigs

Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] update {g5,iseries,pseries}_defconfigs

Updating the defconfigs for iseries, pseries, and G5. Sticking with
the defaults, with the following exceptions: I've turned off HW_RANDOM
for all three configs. For G5, I've enabled SND_AOA and friends as
modules; this includes the FABRIC_LAYOUT, ONYX, TAS, TOONIE and
SOUNDBUS* config options.

Signed-off-by: Will Schmidt <will_schmidt@vnet.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[PATCH] powerpc: update {g5,iseries,pseries}_defconfigs

Default choices for all.

Signed-off-by: Will Schmidt <willschm@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[PATCH] powerpc: Update {g5,pseries,ppc64}_defconfig

Update defconfigs for g5, pseries and generic ppc64. Default choices
for everything, with the following exceptions:

* Enable WINDFARM_PM112 on g5 and ppc64.
* Increase CONFIG_NR_CPUS to 4 in g5_defconfig
* CONFIG_TIGON3=y instead of =m in g5_defconfig

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[PATCH] e1000: Added disable packet split capability

Adds the ability to disability packet split at compile time and use the legacy receive path on PCI express hardware. Made this a CONFIG option and modified the Kconfig, to reflect the new option.

Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: John Ronciak <john.ronciak@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

powerpc: update defconfigs

Signed-off-by: Paul Mackerras <paulus@samba.org>

[PATCH] powerpc: update defconfigs

My patch moving ppc64 RTC to genrtc was supposed to update all
defconfigs, but for some reason, the patch actually posted only had the
pseries one... ouch. This patch properly updates all defconfigs.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[PATCH] ppc64: Update g5_defconfig for ARCH=powerpc

This patch updates g5_defconfig for ARCH=powerpc in order to add the SMU
support & thermal drivers to it, the pmac sound driver (works on some
G5s) and replaces rivafb with nvidiafb which works better for the cards
found in G5 based machines.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

powerpc: Copy default configs into arch/powerpc/configs

Copy default configs into arch/powerpc/configs, rename bpa_defconfig to
cell_defconfig while we're at it.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>