#
32c53420 |
|
18-May-2022 |
Jakub Kicinski <kuba@kernel.org> |
eth: de4x5: remove support for Generic DECchip & DIGITAL EtherWORKS PCI/EISA Looks like almost all changes to this driver had been tree-wide refactoring since git era begun. There is one commit from Al 15 years ago which could potentially be fixing a real bug. The driver is using virt_to_bus() and is a real magnet for pointless cleanups. It seems unlikely to have real users. Let's try to shed this maintenance burden. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
679b2ec8 |
|
23-Feb-2020 |
Diego Elio Pettenò <flameeyes@flameeyes.com> |
scsi: sr: remove references to BLK_DEV_SR_VENDOR, leave it enabled This kernel configuration is basically enabling/disabling sr driver quirks detection. While these quirks are for fairly rare devices (very old CD burners, and a glucometer), the additional detection of these models is a very minimal amount of code. The logic behind the quirks is always built into the sr driver. This also removes the config from all the defconfig files that are enabling this already. Link: https://lore.kernel.org/r/20200223191144.726-1-flameeyes@flameeyes.com Reviewed-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Diego Elio Pettenò <flameeyes@flameeyes.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
#
93a1544a |
|
12-Nov-2019 |
YueHaibing <yuehaibing@huawei.com> |
powerpc/configs: remove obsolete CONFIG_INET_XFRM_MODE_* and CONFIG_INET6_XFRM_MODE_* These Kconfig options has been removed in commit 4c145dce2601 ("xfrm: make xfrm modes builtin") So there is no point to keep it in defconfigs any longer. Signed-off-by: YueHaibing <yuehaibing@huawei.com> [mpe: Extract from cross arch patch] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190612071901.21736-1-yuehaibing@huawei.com
|
#
14b2f7d9 |
|
04-Jun-2019 |
Krzysztof Kozlowski <krzk@kernel.org> |
powerpc/configs: Remove useless UEVENT_HELPER_PATH Remove the CONFIG_UEVENT_HELPER_PATH because: 1. It is disabled since commit 1be01d4a5714 ("driver: base: Disable CONFIG_UEVENT_HELPER by default") as its dependency (UEVENT_HELPER) was made default to 'n', 2. It is not recommended (help message: "This should not be used today [...] creates a high system load") and was kept only for ancient userland, 3. Certain userland specifically requests it to be disabled (systemd README: "Legacy hotplug slows down the system and confuses udev"). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
#
5ee5d808 |
|
22-Aug-2017 |
Michael Ellerman <mpe@ellerman.id.au> |
powerpc/configs: Drop unneeded CONFIG_CRYPTO_ANSI_CPRNG Since commit 401e4238f35c ("crypto: rng - Make DRBG the default RNG") we no longer need to set CONFIG_CRYPTO_ANSI_CPRNG in our defconfigs. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
#
980b4503 |
|
22-Aug-2017 |
Michael Ellerman <mpe@ellerman.id.au> |
powerpc/configs: Update for symbol movement only Update defconfigs for symbols that have moved around, without their value changing. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
#
f22cc4d7 |
|
03-Feb-2016 |
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> |
powerpc: convert chrp32_defconfig to use libata PATA drivers IDE subsystem has been deprecated since 2009 and the majority (if not all) of Linux distributions have switched to use libata for ATA support exclusively. However there are still some users (mostly old or/and embedded non-x86 systems) that have not converted from using IDE subsystem to libata PATA drivers. This doesn't seem to be good thing in the long-term for Linux as while there is less and less PATA systems left in use: * testing efforts are divided between two subsystems * having duplicate drivers for same hardware confuses users This patch converts chrp32_defconfig to use libata PATA drivers. Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
|
#
bdd91001 |
|
05-Jul-2016 |
Andrew Donnellan <andrew.donnellan@au1.ibm.com> |
powerpc/configs: Remove old symbols from defconfigs Update defconfigs to remove old symbols and comments referencing old symbols. Dropped: * AVERAGE * INET_LRO * EXT3_DEFAULTS_TO_ORDERED * EXT3_FS_XATTR * I2O * INFINIBAND_AMSO1100 * INFINIBAND_EHCA * IP1000 Replaced: * BLK_DEV_XIP -> BLK_DEV_RAM_DAX * CLK_PPC_CORENET -> CLK_QORIQ * EXT2_FS_XIP -> FS_DAX * EXT3_FS* -> EXT4_FS* Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
#
a85cade6 |
|
19-Jan-2015 |
Michael Ellerman <mpe@ellerman.id.au> |
powerpc: Update all configs using savedefconfig It looks like it's ~4 years since we updated some of these, so do a bulk update. Verified that the before and after generated configs are exactly the same. Which begs the question why update them? The answer is that it can be confusing when the stored defconfig drifts too far from the generated result. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
#
3a0d89d3 |
|
15-May-2014 |
Naoki MATSUMOTO <nekomatu@gmail.com> |
USB: delete CONFIG_USB_DEVICEFS from defconfig It no longer occurs in Kconfig. USB: remove CONFIG_USB_DEVICEFS(fb28d58b) leaked remove defconfig. Signed-off-by: Naoki MATSUMOTO <nekomatu+linux@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
#
61a3e166 |
|
08-Aug-2010 |
Benjamin Herrenschmidt <benh@kernel.crashing.org> |
powerpc: Trim defconfigs This trims all our defconfigs using make savedefconfig Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
|
#
65cf840f |
|
06-Jun-2010 |
Grant Likely <grant.likely@secretlab.ca> |
powerpc: Disable CONFIG_SYSFS_DEPRECATED Acked-by: Grant Likely <grant.likely@secretlab.ca> On 5 May 2010 21:33, "Anton Blanchard" <anton@samba.org> wrote: CONFIG_SYSFS_DEPRECATED can cause issues with newer distros and should not be required for any distro in the last 3 or 4 years, so disable it. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
|
#
dd7f8dbe |
|
26-Jan-2009 |
Jean Delvare <khali@linux-fr.org> |
eeprom: More consistent symbol names Now that all EEPROM drivers live in the same place, let's harmonize their symbol names. Also fix eeprom's dependencies, it definitely needs sysfs, and is no longer experimental after many years in the kernel tree. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Cc: David Brownell <dbrownell@users.sourceforge.net>
|
#
cb8fdc69 |
|
11-Nov-2008 |
Paul Mackerras <paulus@samba.org> |
powerpc: Update desktop/server defconfigs Turned off CONFIG_PCI_LEGACY and turned on EXT4, and otherwise mostly took the defaults. This also updates ppc6xx_defconfig, which covers the 6xx/7xx/7xxx-based embedded boards. Signed-off-by: Paul Mackerras <paulus@samba.org>
|
#
9bdbb963 |
|
25-Aug-2008 |
Paul Mackerras <paulus@samba.org> |
powerpc: Update defconfigs for most non-embedded platforms Signed-off-by: Paul Mackerras <paulus@samba.org>
|
#
09c20121 |
|
20-May-2008 |
Paul Mackerras <paulus@samba.org> |
[POWERPC] Update defconfigs for desktop/server systems Signed-off-by: Paul Mackerras <paulus@samba.org>
|
#
a8f75ea7 |
|
26-Mar-2008 |
Stephen Rothwell <sfr@canb.auug.org.au> |
[POWERPC] Remove CONFIG_PCI_LEGACY from some configs This will remove some build warnings and doesn't stop us building any drivers that we were building previously with these configs. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
|
#
93ce4e2d |
|
19-Mar-2008 |
Paul Mackerras <paulus@samba.org> |
[POWERPC] Update some defconfigs Signed-off-by: Paul Mackerras <paulus@samba.org>
|
#
43af66e1 |
|
05-Dec-2007 |
Paul Mackerras <paulus@samba.org> |
[POWERPC] Update defconfigs This updates all the defconfigs in arch/powerpc/configs except iseries and ps3, which were updated by the preceding commits. This mostly takes the defaults, except that I turned on tickless idle and high-resolution timers for everything, and turned off instrumentation support and "Fair group CPU scheduler" for the smaller/embedded platforms. Signed-off-by: Paul Mackerras <paulus@samba.org>
|
#
309a1092 |
|
14-Oct-2007 |
Anton Blanchard <anton@samba.org> |
[POWERPC] Enable SLUB in *_defconfig When checking out the new NO_HZ support in powerpc, I noticed we never slept for more than 2 seconds. It turns out SLAB has a 2 second per cpu timer that causes this. After switching to SLUB I see some nice 4 second sleeps which is the limit on this POWER6 box (the decrementer ticks at 512MHz): slept 4.19 sec slept 4.19 sec slept 4.19 sec slept 4.19 sec slept 3.96 sec slept 3.80 sec slept 2.99 sec Since SLUB is now the default and some powerpc defconfigs already enable it, lets enable SLUB across the board for consistency. While doing this I also noticed that the maple defconfig has SLAB debugging enabled which is sure to make your box nice and slow. Fix that too. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
|
#
13a6976a |
|
30-Aug-2007 |
Paul Mackerras <paulus@samba.org> |
[POWERPC] Update defconfigs Signed-off-by: Paul Mackerras <paulus@samba.org>
|
#
ca74c013 |
|
25-Jun-2007 |
Paul Mackerras <paulus@samba.org> |
[POWERPC] Update defconfigs Signed-off-by: Paul Mackerras <paulus@samba.org>
|
#
e89debcd |
|
22-Jan-2007 |
Paul Mackerras <paulus@samba.org> |
[POWERPC] Update defconfigs Mostly took the defaults, except tried to get the netfilter options more or less as they were before. Signed-off-by: Paul Mackerras <paulus@samba.org>
|
#
2cec1b45 |
|
24-Sep-2006 |
Olaf Hering <olaf@aepfle.de> |
[POWERPC] update powerpc defconfig files after libata kconfig breakage Update defconfig files after libata .config breakage sed -i 's/CONFIG_SCSI_SATA_/CONFIG_SATA_/;s/CONFIG_SCSI_SATA/CONFIG_ATA/' arch/powerpc/configs/*g Signed-off-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
|
#
fb7d527c |
|
09-Sep-2006 |
Paul Mackerras <paulus@samba.org> |
[POWERPC] Update defconfigs Signed-off-by: Paul Mackerras <paulus@samba.org>
|
#
4ce631e7 |
|
03-Jul-2006 |
Paul Mackerras <paulus@samba.org> |
[POWERPC] Add a default config for 32-bit CHRP machines Signed-off-by: Paul Mackerras <paulus@samba.org>
|