MIPS: Explicitly include correct DT includes

The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it was merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.

Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

mips: ralink: match all supported system controller compatible strings

Recently, A new clock and reset controller driver has been introduced to
the ralink mips target[1]. It provides proper system control and adds more
SoC specific compatible strings. In order to better initialize CPUs, this
patch removes the outdated "ralink,mt7620a-sysc" and add all dt-binding
documented compatible strings to the system controller match table.

[1] https://lore.kernel.org/all/20230619040941.1340372-1-sergio.paracuellos@gmail.com/

Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

mips: ralink: introduce commonly used remap node function

The ralink_of_remap() function is repeated several times on SoC specific
source files. They have the same structure, but just differ in compatible
strings. In order to make commonly use of these codes, this patch
introduces a newly designed mtmips_of_remap_node() function to match and
remap all supported system controller and memory controller nodes.

Build and run tested on MT7620 and MT7628.

Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

mips: ralink: remove reset related code

A proper clock driver for ralink SoCs has been added. This driver is also
a reset provider for the SoC. Hence there is no need to have reset related
code in 'arch/mips/ralink' folder anymore. The only code that remains is
the one related with mips_reboot_setup where a PCI reset is performed.
We maintain this because I cannot test old ralink board with PCI to be
sure all works if we remove also this code.

Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

of/fdt: run soc memory setup when early_init_dt_scan_memory fails

If memory has been found early_init_dt_scan_memory now returns 1. If
it hasn't found any memory it will return 0, allowing other memory
setup mechanisms to carry on.

Previously early_init_dt_scan_memory always returned 0 without
distinguishing between any kind of memory setup being done or not. Any
code path after the early_init_dt_scan memory call in the ramips
plat_mem_setup code wouldn't be executed anymore. Making
early_init_dt_scan_memory the only way to initialize the memory.

Some boards, including my mt7621 based Cudy X6 board, depend on memory
initialization being done via the soc_info.mem_detect function
pointer. Those wouldn't be able to obtain memory and panic the kernel
during early bootup with the message "early_init_dt_alloc_memory_arch:
Failed to allocate 12416 bytes align=0x40".

Fixes: 1f012283e936 ("of/fdt: Rework early_init_dt_scan_memory() to call directly")
Cc: stable@vger.kernel.org
Signed-off-by: Andreas Rammhold <andreas@rammhold.de>
Link: https://lore.kernel.org/r/20221223112748.2935235-1-andreas@rammhold.de
Signed-off-by: Rob Herring <robh@kernel.org>

MIPS: ralink: mt7621: avoid to init common ralink reset controller

Commit 38a8553b0a22 ("clk: ralink: make system controller node a reset provider")
make system controller a reset provider for mt7621 ralink SoCs. Ralink init code
also tries to start previous common reset controller which at the end tries to
find device tree node 'ralink,rt2880-reset'. mt7621 device tree file is not
using at all this node anymore. Hence avoid to init this common reset controller
for mt7621 ralink SoCs to avoid 'Failed to find reset controller node' boot
error trace error.

Fixes: 64b2d6ffff86 ("staging: mt7621-dts: align resets with binding documentation")
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

mips: ralink: Fix refcount leak in of.c

In plat_of_remap_node(), plat_of_remap_node() will return a node
pointer with refcount incremented. We should use of_node_put()
when it is not used anymore.

Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

MIPS: Remove redundant definitions of device_tree_init()

There exists many same definitions of device_tree_init() for various
platforms, add a weak function in arch/mips/kernel/prom.c to clean
up the related code.

Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

of/fdt: Rework early_init_dt_scan_memory() to call directly

Use of the of_scan_flat_dt() function predates libfdt and is discouraged
as libfdt provides a nicer set of APIs. Rework
early_init_dt_scan_memory() to be called directly and use libfdt.

Cc: John Crispin <john@phrozen.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: linux-mips@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Reviewed-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Tested-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211215150102.1303588-1-robh@kernel.org

MIPS: ralink: export rt_sysc_membase for rt2880_wdt.c

rt2880_wdt.c uses (well, attempts to use) rt_sysc_membase. However,
when this watchdog driver is built as a loadable module, there is a
build error since the rt_sysc_membase symbol is not exported.
Export it to quell the build error.

ERROR: modpost: "rt_sysc_membase" [drivers/watchdog/rt2880_wdt.ko] undefined!

Fixes: 473cf939ff34 ("watchdog: add ralink watchdog driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Wim Van Sebroeck <wim@iguana.be>
Cc: John Crispin <john@phrozen.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-watchdog@vger.kernel.org
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

MIPS: ralink: mt7621: add memory detection support

mt7621 has the following memory map:
0x0-0x1c000000: lower 448m memory
0x1c000000-0x2000000: peripheral registers
0x20000000-0x2400000: higher 64m memory

detect_memory_region in arch/mips/kernel/setup.c only adds the first
memory region and isn't suitable for 512m memory detection because
it may accidentally read the memory area for peripheral registers.

This commit adds memory detection capability for mt7621:
1. Add the highmem area when 512m is detected.
2. Guard memcmp from accessing peripheral registers:
This only happens when a user decided to change kernel load address
to 256m or higher address. Since this is a quite unusual case, we
just skip 512m testing and return 256m as memory size.

Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
[Minor commit message reword, make mt7621_memory_detect static]
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

MIPS: of: Introduce helper function to get DTB

Selection of the DTB to be used was burried in more or less readable
code in head.S. Move this code into a inline helper function and
use it.

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>

MIPS: Use address-of operator on section symbols

When building xway_defconfig with clang:

arch/mips/lantiq/prom.c:82:23: error: array comparison always evaluates
to true [-Werror,-Wtautological-compare]
else if (__dtb_start != __dtb_end)
^
1 error generated.

These are not true arrays, they are linker defined symbols, which are
just addresses. Using the address of operator silences the warning
and does not change the resulting assembly with either clang/ld.lld
or gcc/ld (tested with diff + objdump -Dr). Do the same thing across
the entire MIPS subsystem to ensure there are no more warnings around
this type of comparison.

Link: https://github.com/ClangBuiltLinux/linux/issues/1232
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

MIPS: replace add_memory_region with memblock

add_memory_region was the old interface for registering memory and
was already changed to used memblock internaly. Replace it by
directly calling memblock functions.

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

remove ioremap_nocache and devm_ioremap_nocache

ioremap has provided non-cached semantics by default since the Linux 2.6
days, so remove the additional ioremap_nocache interface.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500

Based on 2 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation #

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-only

has been chosen to replace the boilerplate/reference in 4122 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: remove include/linux/bootmem.h

Move remaining definitions and declarations from include/linux/bootmem.h
into include/linux/memblock.h and remove the redundant header.

The includes were replaced with the semantic patch below and then
semi-automated removal of duplicated '#include <linux/memblock.h>

@@
@@
- #include <linux/bootmem.h>
+ #include <linux/memblock.h>

[sfr@canb.auug.org.au: dma-direct: fix up for the removal of linux/bootmem.h]
Link: http://lkml.kernel.org/r/20181002185342.133d1680@canb.auug.org.au
[sfr@canb.auug.org.au: powerpc: fix up for removal of linux/bootmem.h]
Link: http://lkml.kernel.org/r/20181005161406.73ef8727@canb.auug.org.au
[sfr@canb.auug.org.au: x86/kaslr, ACPI/NUMA: fix for linux/bootmem.h removal]
Link: http://lkml.kernel.org/r/20181008190341.5e396491@canb.auug.org.au
Link: http://lkml.kernel.org/r/1536927045-23536-30-git-send-email-rppt@linux.vnet.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Serge Semin <fancer.lancer@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MIPS: ralink: Fix request_mem_region error handling

request_mem_region returns a NULL pointer on error, comparing it
against a number results in a warning:

arch/mips/ralink/of.c: In function 'plat_of_remap_node':
arch/mips/ralink/of.c:45:15: error: ordered comparison of pointer with integer zero [-Werror=extra]
arch/mips/ralink/irq.c: In function 'intc_of_init':
arch/mips/ralink/irq.c:167:15: error: ordered comparison of pointer with integer zero [-Werror=extra]

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: John Crispin <john@phrozen.org>
Cc: Tobias Wolf <dev-NTEO@vplace.de>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/15045/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

ralink: Introduce fw_passed_dtb to arch/mips/ralink

This patch adds fw_passed_dtb to arch/mips/ralink to support
CONFIG_MIPS_RAW_APPENDED_DTB. Furthermore it adds a check that __dtb_start is
not the same address as __dtb_end.

Signed-off-by: Tobias Wolf <dev-NTEO@vplace.de>
Acked-by: John Crispin <john@phrozen.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14662/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Change my email address

The old address is no longer valid. Use the my new one instead.

Signed-off-by: John Crispin <john@phrozen.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/13201/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Make MIPS_CMDLINE_DTB default

Seval of-enabled machines (bmips, lantiq, xlp, pistachio, ralink) copied
the arguments from dtb to arcs_command_line to prevent the kernel from
overwriting them.

Since there is now an option to keep the dtb arguments, default to the
new option remove the "backup" to arcs_command_line in case of USE_OF is
enabled, except for those platforms that still take the bootloader
arguments or do not use any at all.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: Kevin Cernekee <cernekee@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: John Crispin <blogic@openwrt.org>
Cc: Ganesan Ramalingam <ganesanr@broadcom.com>
Cc: Jayachandran C <jchandra@broadcom.com>
Cc: Andrew Bresticker <abrestic@chromium.org>
Cc: James Hartley <james.hartley@imgtec.com>
Patchwork: https://patchwork.linux-mips.org/patch/11285/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: ralink: copy the commandline from the devicetree

This is a regression caused by:
commit afb46f7996e91aeb36e07bc92cf96e8045bec00e
Author: Rob Herring <robh@kernel.org>
Date: Wed Apr 2 19:07:24 2014 -0500
mips: ralink: convert to use unflatten_and_copy_device_tree

Make the of init code reuse the cmdline defined inside the dts.

Signed-off-by: John Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/8008/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: ralink: allow manual memory override

RT5350 relies on the bootloader setting up the memc correctly. On some boards
the setup is incorrect leading to 32 MB being available but only 16 MB being
recognized. Allow these boards to manually override the memory range.

Signed-off-by: John Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/8004/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Create a helper function for DT setup

A couple of platforms register two buses and call of_platform_populate().
Move this into a common function to reduce duplication.

Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Cc: f.fainelli@gmail.com
Cc: mbizon@freebox.fr
Cc: jogo@openwrt.org
Cc: jfraser@broadcom.com
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/8167/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: ralink: Use strlcpy to ensure string is always NUL-terminated.

Replacing strncpy with strlcpy to avoid strings that lacks null terminate.

Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Cc: Rob Herring <robh@kernel.org>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: John Crispin <blogic@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/7485/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

of/fdt: consolidate built-in dtb section variables

Unify the various architectures __dtb_start and __dtb_end definitions
moving them into of_fdt.h.

Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Vineet Gupta <vgupta@synopsys.com>
Acked-by: James Hogan <james.hogan@imgtec.com>
Tested-by: Michal Simek <michal.simek@xilinx.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Chris Zankel <chris@zankel.net>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: linux-metag@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux@lists.openrisc.net
Cc: linux-xtensa@linux-xtensa.org
Tested-by: Grant Likely <grant.likely@linaro.org>
Tested-by: Stephen Chivers <schivers@csc.com>

mips: convert fdt pointers to opaque pointers

The architecture code does not need to access the internals of the FDT
blob directly, so make the pointers to it void * and use char arrays
for section variables.

Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Tested-by: Grant Likely <grant.likely@linaro.org>

mips: ralink: convert to use unflatten_and_copy_device_tree

The ralink FDT code can be simplified by using
unflatten_and_copy_device_tree function. This removes all accesses to
FDT header data by the arch code.

Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Tested-by: Grant Likely <grant.likely@linaro.org>

MIPS: Panic messages should not end in \n.

Panic() is going to add a \n itself and it's annoying if a panic message rolls
of the screen on a device with no scrollback.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

mips: add explicit includes of prom.h

In preparation of removing prom.h include by of.h, add explicit includes.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Grant Likely <grant.likely@linaro.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org

MIPS: ralink: Add support for reset-controller API

Add a helper for reseting different devices on the SoC.

Signed-off-by: John Crispin <blogic@openwrt.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5804/
Patchwork: https://patchwork.linux-mips.org/patch/5797/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Ralink: Use strlcpy() instead of strncpy().

'compatible' is used by strlen() in __of_device_is_compatible().

Ensure strings are always '\0' terminated.

'of_ids is not a structure in "include/uapi/*", so no need to initialize
it completly; using strlcpy() instead of strncpy() will do.

Signed-off-by: Chen Gang <gang.chen@asianux.com>
Acked-by: John Crispin <blogic@openwrt.org>
Cc: juhosg@openwrt.org
Cc: linux-mips@linux-mips.org
Cc: Linux-Arch <linux-arch@vger.kernel.org>
Patchwork: https://patchwork.linux-mips.org/patch/5330/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: ralink: add missing SZ_1M multiplier

On RT5350 the memory size is set to Bytes and not MegaBytes due to a missing
multiplier.

Signed-off-by: John Crispin <blogic@openwrt.org>
Cc: John Crispin <blogic@openwrt.org>
Patchwork: https://patchwork.linux-mips.org/patch/5378/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: ralink: make use of the new memory detection code

Call detect_memory_region() from plat_mem_setup() unless the size was already
read from the system controller.

Signed-off-by: John Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/5184/

MIPS: ralink: adds OF code

Until there is a generic MIPS way of handing the DTB over from bootloader to
kernel we rely on a built in devicetrees. The OF code also remaps those register
ranges that we use global in our drivers.

Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/4895/