arm64: Also reset KASAN tag if page is not PG_mte_tagged

Consider the following sequence of events:

1) A page in a PROT_READ|PROT_WRITE VMA is faulted.
2) Page migration allocates a page with the KASAN allocator,
causing it to receive a non-match-all tag, and uses it
to replace the page faulted in 1.
3) The program uses mprotect() to enable PROT_MTE on the page faulted in 1.

As a result of step 3, we are left with a non-match-all tag for a page
with tags accessible to userspace, which can lead to the same kind of
tag check faults that commit e74a68468062 ("arm64: Reset KASAN tag in
copy_highpage with HW tags only") intended to fix.

The general invariant that we have for pages in a VMA with VM_MTE_ALLOWED
is that they cannot have a non-match-all tag. As a result of step 2, the
invariant is broken. This means that the fix in the referenced commit
was incomplete and we also need to reset the tag for pages without
PG_mte_tagged.

Fixes: e5b8d9218951 ("arm64: mte: reset the page tag in page->flags")
Cc: <stable@vger.kernel.org> # 5.15
Link: https://linux-review.googlesource.com/id/I7409cdd41acbcb215c2a7417c1e50d37b875beff
Signed-off-by: Peter Collingbourne <pcc@google.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20230420210945.2313627-1-pcc@google.com
Signed-off-by: Will Deacon <will@kernel.org>

arm64: Reset KASAN tag in copy_highpage with HW tags only

During page migration, the copy_highpage function is used to copy the
page data to the target page. If the source page is a userspace page
with MTE tags, the KASAN tag of the target page must have the match-all
tag in order to avoid tag check faults during subsequent accesses to the
page by the kernel. However, the target page may have been allocated in
a number of ways, some of which will use the KASAN allocator and will
therefore end up setting the KASAN tag to a non-match-all tag. Therefore,
update the target page's KASAN tag to match the source page.

We ended up unintentionally fixing this issue as a result of a bad
merge conflict resolution between commit e059853d14ca ("arm64: mte:
Fix/clarify the PG_mte_tagged semantics") and commit 20794545c146 ("arm64:
kasan: Revert "arm64: mte: reset the page tag in page->flags""), which
preserved a tag reset for PG_mte_tagged pages which was considered to be
unnecessary at the time. Because SW tags KASAN uses separate tag storage,
update the code to only reset the tags when HW tags KASAN is enabled.

Signed-off-by: Peter Collingbourne <pcc@google.com>
Link: https://linux-review.googlesource.com/id/If303d8a709438d3ff5af5fd85706505830f52e0c
Reported-by: "Kuan-Ying Lee (李冠穎)" <Kuan-Ying.Lee@mediatek.com>
Cc: <stable@vger.kernel.org> # 6.1
Fixes: 20794545c146 ("arm64: kasan: Revert "arm64: mte: reset the page tag in page->flags"")
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Link: https://lore.kernel.org/r/20230215050911.1433132-1-pcc@google.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

arm64: mte: Lock a page for MTE tag initialisation

Initialising the tags and setting PG_mte_tagged flag for a page can race
between multiple set_pte_at() on shared pages or setting the stage 2 pte
via user_mem_abort(). Introduce a new PG_mte_lock flag as PG_arch_3 and
set it before attempting page initialisation. Given that PG_mte_tagged
is never cleared for a page, consider setting this flag to mean page
unlocked and wait on this bit with acquire semantics if the page is
locked:

- try_page_mte_tagging() - lock the page for tagging, return true if it
can be tagged, false if already tagged. No acquire semantics if it
returns true (PG_mte_tagged not set) as there is no serialisation with
a previous set_page_mte_tagged().

- set_page_mte_tagged() - set PG_mte_tagged with release semantics.

The two-bit locking is based on Peter Collingbourne's idea.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Peter Collingbourne <pcc@google.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Peter Collingbourne <pcc@google.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221104011041.290951-6-pcc@google.com

arm64: mte: Fix/clarify the PG_mte_tagged semantics

Currently the PG_mte_tagged page flag mostly means the page contains
valid tags and it should be set after the tags have been cleared or
restored. However, in mte_sync_tags() it is set before setting the tags
to avoid, in theory, a race with concurrent mprotect(PROT_MTE) for
shared pages. However, a concurrent mprotect(PROT_MTE) with a copy on
write in another thread can cause the new page to have stale tags.
Similarly, tag reading via ptrace() can read stale tags if the
PG_mte_tagged flag is set before actually clearing/restoring the tags.

Fix the PG_mte_tagged semantics so that it is only set after the tags
have been cleared or restored. This is safe for swap restoring into a
MAP_SHARED or CoW page since the core code takes the page lock. Add two
functions to test and set the PG_mte_tagged flag with acquire and
release semantics. The downside is that concurrent mprotect(PROT_MTE) on
a MAP_SHARED page may cause tag loss. This is already the case for KVM
guests if a VMM changes the page protection while the guest triggers a
user_mem_abort().

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
[pcc@google.com: fix build with CONFIG_ARM64_MTE disabled]
Signed-off-by: Peter Collingbourne <pcc@google.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Peter Collingbourne <pcc@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221104011041.290951-3-pcc@google.com

arm64: kasan: Revert "arm64: mte: reset the page tag in page->flags"

This reverts commit e5b8d9218951e59df986f627ec93569a0d22149b.

Pages mapped in user-space with PROT_MTE have the allocation tags either
zeroed or copied/restored to some user values. In order for the kernel
to access such pages via page_address(), resetting the tag in
page->flags was necessary. This tag resetting was deferred to
set_pte_at() -> mte_sync_page_tags() but it can race with another CPU
reading the flags (via page_to_virt()):

P0 (mte_sync_page_tags): P1 (memcpy from virt_to_page):
Rflags!=0xff
Wflags=0xff
DMB (doesn't help)
Wtags=0
Rtags=0 // fault

Since now the post_alloc_hook() function resets the page->flags tag when
unpoisoning is skipped for user pages (including the __GFP_ZEROTAGS
case), revert the arm64 commit calling page_kasan_tag_reset().

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Peter Collingbourne <pcc@google.com>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Acked-by: Andrey Konovalov <andreyknvl@gmail.com>
Link: https://lore.kernel.org/r/20220610152141.2148929-5-catalin.marinas@arm.com
Signed-off-by: Will Deacon <will@kernel.org>

arm64: fix types in copy_highpage()

In copy_highpage() the `kto` and `kfrom` local variables are pointers to
struct page, but these are used to hold arbitrary pointers to kernel memory
. Each call to page_address() returns a void pointer to memory associated
with the relevant page, and copy_page() expects void pointers to this
memory.

This inconsistency was introduced in commit 2563776b41c3 ("arm64: mte:
Tags-aware copy_{user_,}highpage() implementations") and while this
doesn't appear to be harmful in practice it is clearly wrong.

Correct this by making `kto` and `kfrom` void pointers.

Fixes: 2563776b41c3 ("arm64: mte: Tags-aware copy_{user_,}highpage() implementations")
Signed-off-by: Tong Tiangen <tongtiangen@huawei.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Link: https://lore.kernel.org/r/20220420030418.3189040-3-tongtiangen@huawei.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

arm64: mte: reset the page tag in page->flags

The hardware tag-based KASAN for compatibility with the other modes stores
the tag associated to a page in page->flags. Due to this the kernel
faults on access when it allocates a page with an initial tag and the user
changes the tags.

Reset the tag associated by the kernel to a page in all the meaningful
places to prevent kernel faults on access.

Note: An alternative to this approach could be to modify page_to_virt().
This though could end up being racy, in fact if a CPU checks the
PG_mte_tagged bit and decides that the page is not tagged but another CPU
maps the same with PROT_MTE and becomes tagged the subsequent kernel
access would fail.

Link: https://lkml.kernel.org/r/9073d4e973747a6f78d5bdd7ebe17f290d087096.1606161801.git.andreyknvl@google.com
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Marco Elver <elver@google.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

arm64: Avoid unnecessary clear_user_page() indirection

Since clear_user_page() calls clear_page() directly, avoid the
unnecessary indirection.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>

arm64: mte: Tags-aware copy_{user_,}highpage() implementations

When the Memory Tagging Extension is enabled, the tags need to be
preserved across page copy (e.g. for copy-on-write, page migration).

Introduce MTE-aware copy_{user_,}highpage() functions to copy tags to
the destination if the source page has the PG_mte_tagged flag set.
copy_user_page() does not need to handle tag copying since, with this
patch, it is only called by the DAX code where there is no source page
structure (and no source tags).

Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Co-developed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 234

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details you should have received a copy of the gnu general
public license along with this program if not see http www gnu org
licenses

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-only

has been chosen to replace the boilerplate/reference in 503 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Enrico Weigelt <info@metux.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190602204653.811534538@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: Defer dcache flush in __cpu_copy_user_page

Defer dcache flushing to __sync_icache_dcache by calling
flush_dcache_page which clears PG_dcache_clean flag.

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Ashok Kumar <ashoks@broadcom.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

arm64: export __cpu_{clear,copy}_user_page functions

The __cpu_clear_user_page() and __cpu_copy_user_page() functions
are not currently exported. This prevents modules from using
clear_user_page() and copy_user_page().

Signed-off-by: Mark Salter <msalter@redhat.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

arm64: MMU fault handling and page table management

This patch adds support for the handling of the MMU faults (exception
entry code introduced by a previous patch) and page table management.

The user translation table is pointed to by TTBR0 and the kernel one
(swapper_pg_dir) by TTBR1. There is no translation information shared or
address space overlapping between user and kernel page tables.

Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Olof Johansson <olof@lixom.net>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>