arm64, crash: wrap crash dumping code into crash related ifdefs

Now crash codes under kernel/ folder has been split out from kexec
code, crash dumping can be separated from kexec reboot in config
items on arm64 with some adjustments.

Here wrap up crash dumping codes with CONFIG_CRASH_DUMP ifdeffery.

[bhe@redhat.com: fix building error in generic codes]
Link: https://lkml.kernel.org/r/20240129135033.157195-2-bhe@redhat.com
Link: https://lkml.kernel.org/r/20240124051254.67105-8-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Pingfan Liu <piliu@redhat.com>
Cc: Klara Modin <klarasmodin@gmail.com>
Cc: Michael Kelley <mhklinux@outlook.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

kexec_file, arm64: print out debugging message if required

Then when specifying '-d' for kexec_file_load interface, loaded locations
of kernel/initrd/cmdline etc can be printed out to help debug.

Here replace pr_debug() with the newly added kexec_dprintk() in kexec_file
loading related codes.

And also remove the kimage->segment[] printing because the generic code
has done the printing.

Link: https://lkml.kernel.org/r/20231213055747.61826-5-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Cc: Conor Dooley <conor@kernel.org>
Cc: Joe Perches <joe@perches.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

arm64/kexec: Fix missing extra range for crashkres_low.

Like crashk_res, Calling crash_exclude_mem_range function with
crashk_low_res area would need extra crash_mem range too.

Add one more extra cmem slot in case of crashk_low_res is used.

Signed-off-by: Levi Yun <ppbuk5246@gmail.com>
Fixes: 944a45abfabc ("arm64: kdump: Reimplement crashkernel=X")
Cc: <stable@vger.kernel.org> # 5.19.x
Acked-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220831103913.12661-1-ppbuk5246@gmail.com
Signed-off-by: Will Deacon <will@kernel.org>

arm64: kdump: Reimplement crashkernel=X

There are following issues in arm64 kdump:
1. We use crashkernel=X to reserve crashkernel in DMA zone, which
will fail when there is not enough low memory.
2. If reserving crashkernel above DMA zone, in this case, crash dump
kernel will fail to boot because there is no low memory available
for allocation.

To solve these issues, introduce crashkernel=X,[high,low].
The "crashkernel=X,high" is used to select a region above DMA zone, and
the "crashkernel=Y,low" is used to allocate specified size low memory.

Signed-off-by: Chen Zhou <chenzhou10@huawei.com>
Co-developed-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20220506114402.365-4-thunder.leizhen@huawei.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

arm64: kexec: Fix missing error code 'ret' warning in load_other_segments()

Since commit ac10be5cdbfa ("arm64: Use common
of_kexec_alloc_and_setup_fdt()"), smatch reports the following warning:

arch/arm64/kernel/machine_kexec_file.c:152 load_other_segments()
warn: missing error code 'ret'

Return code is not set to an error code in load_other_segments() when
of_kexec_alloc_and_setup_fdt() call returns a NULL dtb. This results
in status success (return code set to 0) being returned from
load_other_segments().

Set return code to -EINVAL if of_kexec_alloc_and_setup_fdt() returns
NULL dtb.

Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: ac10be5cdbfa ("arm64: Use common of_kexec_alloc_and_setup_fdt()")
Link: https://lore.kernel.org/r/20211210010121.101823-1-nramas@linux.microsoft.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

arm64: Use common of_kexec_alloc_and_setup_fdt()

The code for setting up the /chosen node in the device tree
and updating the memory reservation for the next kernel has been
moved to of_kexec_alloc_and_setup_fdt() defined in "drivers/of/kexec.c".

Use the common of_kexec_alloc_and_setup_fdt() to setup the device tree
and update the memory reservation for kexec for arm64.

Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210221174930.27324-7-nramas@linux.microsoft.com

arm64: Use ELF fields defined in 'struct kimage'

ELF related fields elf_headers, elf_headers_sz, and elf_headers_mem
have been moved from 'struct kimage_arch' to 'struct kimage' as
elf_headers, elf_headers_sz, and elf_load_addr respectively.

Use the ELF fields defined in 'struct kimage'.

Suggested-by: Rob Herring <robh@kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210221174930.27324-3-nramas@linux.microsoft.com

arm64: kexec_file: fix memory leakage in create_dtb() when fdt_open_into() fails

in function create_dtb(), if fdt_open_into() fails, we need to vfree
buf before return.

Fixes: 52b2a8af7436 ("arm64: kexec_file: load initrd and device-tree")
Cc: stable@vger.kernel.org # v5.0
Signed-off-by: qiuguorui1 <qiuguorui1@huawei.com>
Link: https://lore.kernel.org/r/20210218125900.6810-1-qiuguorui1@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>

arm64: kexec_file: try more regions if loading segments fails

It's possible that the first region picked for the new kernel will make
it impossible to fit the other segments in the required 32GB window,
especially if we have a very large initrd.

Instead of giving up, we can keep testing other regions for the kernel
until we find one that works.

Suggested-by: Ryan O'Leary <ryanoleary@google.com>
Signed-off-by: Benjamin Gwin <bgwin@google.com>
Link: https://lore.kernel.org/r/20201103201106.2397844-1-bgwin@google.com
Signed-off-by: Will Deacon <will@kernel.org>

memblock: reduce number of parameters in for_each_mem_range()

Currently for_each_mem_range() and for_each_mem_range_rev() iterators are
the most generic way to traverse memblock regions. As such, they have 8
parameters and they are hardly convenient to users. Most users choose to
utilize one of their wrappers and the only user that actually needs most
of the parameters is memblock itself.

To avoid yet another naming for memblock iterators, rename the existing
for_each_mem_range[_rev]() to __for_each_mem_range[_rev]() and add a new
for_each_mem_range[_rev]() wrappers with only index, start and end
parameters.

The new wrapper nicely fits into init_unavailable_mem() and will be used
in upcoming changes to simplify memblock traversals.

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> [MIPS]
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Emil Renner Berthing <kernel@esmil.dk>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: https://lkml.kernel.org/r/20200818151634.14343-11-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

arm64: kexec_file: Use struct_size() in kmalloc()

Make use of the struct_size() helper instead of an open-coded version
in order to avoid any potential type mistakes.

This code was detected with the help of Coccinelle and, audited and
fixed manually.

Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20200617213407.GA1385@embeddedor
Signed-off-by: Will Deacon <will@kernel.org>

arm64: kexec_file: print appropriate variable

The value of kbuf->memsz may be different than kbuf->bufsz after calling
kexec_add_buffer(). Hence both values should be logged.

Fixes: 52b2a8af74360 ("arm64: kexec_file: load initrd and device-tree")
Fixes: 3751e728cef29 ("arm64: kexec_file: add crash dump support")
Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>
Cc: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: James Morse <james.morse@arm.com>
Cc: Bhupesh Sharma <bhsharma@redhat.com>
Link: https://lore.kernel.org/r/20200430163142.27282-2-l.stelmach@samsung.com
Signed-off-by: Will Deacon <will@kernel.org>

arm64: kexec_file: Avoid temp buffer for RNG seed

After using get_random_bytes(), you want to wipe the buffer
afterward so the seed remains secret.

In this case, we can eliminate the temporary buffer entirely.
fdt_setprop_placeholder() returns a pointer to the property value
buffer, allowing us to put the random data directly in there without
using a temporary buffer at all. Faster and less stack all in one.

Signed-off-by: George Spelvin <lkml@sdf.org>
Acked-by: Will Deacon <will@kernel.org>
Cc: Hsin-Yi Wang <hsinyi@chromium.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20200330173801.GA9199@SDF.ORG
Signed-off-by: Will Deacon <will@kernel.org>

arm64: kexec_file: Fixed code style.

Remove unnecessary blank.

Signed-off-by: Li Tao <tao.li@vivo.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

arm64: kexec_file: add crash dump support

Enabling crash dump (kdump) includes
* prepare contents of ELF header of a core dump file, /proc/vmcore,
using crash_prepare_elf64_headers(), and
* add two device tree properties, "linux,usable-memory-range" and
"linux,elfcorehdr", which represent respectively a memory range
to be used by crash dump kernel and the header's location

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Reviewed-by: James Morse <james.morse@arm.com>
Tested-and-reviewed-by: Bhupesh Sharma <bhsharma@redhat.com>
Signed-off-by: Will Deacon <will@kernel.org>

arm64: kexec_file: add rng-seed support

Adding "rng-seed" to dtb. It's fine to add this property if original
fdt doesn't contain it. Since original seed will be wiped after
read, so use a default size 128 bytes here.

Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Will Deacon <will@kernel.org>

arm64/kexec: Use consistent convention of initializing 'kxec_buf.mem' with KEXEC_BUF_MEM_UNKNOWN

With commit b6664ba42f14 ("s390, kexec_file: drop arch_kexec_mem_walk()"),
we introduced the KEXEC_BUF_MEM_UNKNOWN macro. If kexec_buf.mem is set
to this value, kexec_locate_mem_hole() will try to allocate free memory.

While other arch(s) like s390 and x86_64 already use this macro to
initialize kexec_buf.mem with, arm64 uses an equivalent value of 0.
Replace it with KEXEC_BUF_MEM_UNKNOWN, to keep the convention of
initializing 'kxec_buf.mem' consistent across various archs.

Cc: takahiro.akashi@linaro.org
Cc: james.morse@arm.com
Reviewed-by: Matthias Brugger <mbrugger@suse.com>
Signed-off-by: Bhupesh Sharma <bhsharma@redhat.com>
Signed-off-by: Will Deacon <will@kernel.org>

arm64: kexec_file: handle empty command-line

Calling strlen() on cmdline == NULL produces a kernel oops. Since having
a NULL cmdline is valid, handle this case explicitly.

Fixes: 52b2a8af7436 ("arm64: kexec_file: load initrd and device-tree")
Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

arm64: kexec_file: return successfully even if kaslr-seed doesn't exist

In kexec_file_load, kaslr-seed property of the current dtb will be deleted
any way before setting a new value if possible. It doesn't matter whether
it exists in the current dtb.

So "ret" should be reset to 0 here.

Fixes: commit 884143f60c89 ("arm64: kexec_file: add kaslr support")
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>

arm64: kexec_file: include linux/vmalloc.h

This is needed for compilation in some configurations that don't
include it implicitly:

arch/arm64/kernel/machine_kexec_file.c: In function 'arch_kimage_file_post_load_cleanup':
arch/arm64/kernel/machine_kexec_file.c:37:2: error: implicit declaration of function 'vfree'; did you mean 'kvfree'? [-Werror=implicit-function-declaration]

Fixes: 52b2a8af7436 ("arm64: kexec_file: load initrd and device-tree")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Will Deacon <will.deacon@arm.com>

arm64: kexec_file: Refactor setup_dtb() to consolidate error checking

setup_dtb() is a little difficult to read. This is largely because it
duplicates the FDT -> Linux errno conversion for every intermediate
return value, but also because of silly cosmetic things like naming
and formatting.

Given that this is all brand new, refactor the function to get us off on
the right foot.

Signed-off-by: Will Deacon <will.deacon@arm.com>

arm64: kexec_file: add kaslr support

Adding "kaslr-seed" to dtb enables triggering kaslr, or kernel virtual
address randomization, at secondary kernel boot. We always do this as
it will have no harm on kaslr-incapable kernel.

We don't have any "switch" to turn off this feature directly, but still
can suppress it by passing "nokaslr" as a kernel boot argument.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
[will: Use rng_is_initialized()]
Signed-off-by: Will Deacon <will.deacon@arm.com>

arm64: kexec_file: allow for loading Image-format kernel

This patch provides kexec_file_ops for "Image"-format kernel. In this
implementation, a binary is always loaded with a fixed offset identified
in text_offset field of its header.

Regarding signature verification for trusted boot, this patch doesn't
contains CONFIG_KEXEC_VERIFY_SIG support, which is to be added later
in this series, but file-attribute-based verification is still a viable
option by enabling IMA security subsystem.

You can sign(label) a to-be-kexec'ed kernel image on target file system
with:
$ evmctl ima_sign --key /path/to/private_key.pem Image

On live system, you must have IMA enforced with, at least, the following
security policy:
"appraise func=KEXEC_KERNEL_CHECK appraise_type=imasig"

See more details about IMA here:
https://sourceforge.net/p/linux-ima/wiki/Home/

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Reviewed-by: James Morse <james.morse@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

arm64: kexec_file: load initrd and device-tree

load_other_segments() is expected to allocate and place all the necessary
memory segments other than kernel, including initrd and device-tree
blob (and elf core header for crash).
While most of the code was borrowed from kexec-tools' counterpart,
users may not be allowed to specify dtb explicitly, instead, the dtb
presented by the original boot loader is reused.

arch_kimage_kernel_post_load_cleanup() is responsible for freeing arm64-
specific data allocated in load_other_segments().

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Reviewed-by: James Morse <james.morse@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

arm64: enable KEXEC_FILE config

Modify arm64/Kconfig to enable kexec_file_load support.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Acked-by: James Morse <james.morse@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>