arm64: dts: qcom: sc7180: Reorganize trogdor rt5682 audio codec dts

It was asserted that the "/delete-property/ VBAT-supply;" that we
needed to do in the rt5682s dts fragment was ugly. Let's change up all
the trogdor device trees to make it explicit which version of "rt5682"
we have and avoid the need for the "delete-property".

As a side effect, this nicely gets rid of the need for a delete-node
in coachz, which doesn't use "rt5682" at all.

A few notes:
- This doesn't get rid of every "/delete-node/" in trogdor, just the
one that was used for rt5682s.
- Though we no longer have any "/delete-node/", we do still override
the "model" in the "sound" node in one case (in pompom) since that
uses the "2mic" sound setup.

This is validated to produce the same result (other than a few
properties being reordered) when taking the dtbs generated by the
kernel build and then doing:

for dtb in *trogdor*.dtb; do
dtc -I dtb -O dts $dtb -o out/$dtb.dts;
done

Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com>
Link: https://lore.kernel.org/r/20230816112143.2.I29a5a330b6994afca81871f74bbacaf55b155937@changeid
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: Only include sc7180.dtsi in sc7180-trogdor.dtsi

The SoC is always present on sc7180-trogdor.dtsi and thus we should
include it in the "generic" dtsi file for trogdor. Previously we had
removed it from there because we had to do the spi6/spi0 swizzle, so
each trogdor variant board had to include sc7180.dtsi and then
sc7180-trogdor.dtsi so that the latter dtsi file could modify the right
spi bus for EC and H1 properties that are common to all trogdor boards.

Now that we're done with that we can replace sc7180.dtsi includes with
sc7180-trogdor.dtsi and include sc7180.dtsi in sc7180-trogdor.dtsi as
was originally intended. We still need to include sc7180-trogdor.dtsi
before the bridge dtsi files though because those rely on the panel
label.

Cc: "Joseph S. Barrera III" <joebar@chromium.org>
Cc: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220427020339.360855-4-swboyd@chromium.org

arm64: dts: qcom: sc7180: Support Lazor/Limozeen rev9

Support Lazor/Limozeen rev9 board where Parade ps8640 is added as the
second source edp bridge.

To support different edp bridge chips in different board revisions,
now we move the #incldue line of the edp bridge dts fragment (e.g.
sc7180-trogdor-ti-sn65dsi86.dtsi) from "sc7180-trogdor-lazor.dtsi" to
per-board-rev dts files.

Since the edp bridge dts fragment overrides 'dsi0_out', which is
defined in "sc7180.dtsi", move the #incldue line of "sc7180.dtsi" from
"sc7180-trogdor-lazor.dtsi" to per-board-rev dts files too, before
the #include line of the edp bridge dts fragment.

Signed-off-by: Philip Chen <philipchen@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211029152647.v3.3.Ie56f55924f5c7706fe3194e710bbef6fdb8b5bc6@changeid

arm64: dts: qcom: sc7180: lazor: Simplify disabling of charger thermal zone

Commit f73558cc83d1 ("arm64: dts: qcom: sc7180: Disable charger
thermal zone for lazor") disables the charger thermal zone for
specific lazor revisions due to an unsupported thermistor type.
The initial idea was to disable the thermal zone for older
revisions and leave it enabled for newer ones that use a
supported thermistor. Finally the thermistor won't be changed
on newer revisions, hence the thermal zone should be disabled
for all lazor (and limozeen) revisions. Instead of disabling
it per revision do it once in the shared .dtsi for lazor.

Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20210322094628.v4.1.I6d587e7ae72a5a47253bb95dfdc3158f8cc8a157@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sc7180: Set up lazor r3+ as sc7180-lite SKUs

Lazor rev3 and later use the 'lite' version of the SC7180 SoC.

Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Cc: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
[dianders: Adjust commit message which referred to downstream history]
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20210301133318.v2.10.Ia3795e192f5bbe17e6714e45fcb0bf5acdbd4c17@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sc7180: Disable charger thermal zone for lazor

Lazor is stuffed with a 47k NTC as thermistor for the charger
temperature which currently isn't supported by the PM6150 ADC
driver. Disable the charger thermal zone to avoid the use of
bogus temperature values.

Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lore.kernel.org/r/20210225103330.v2.2.Ia4c1022191d09fe8c56a16486b77796b83ffcae4@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sc7180: Add sc7180-lazor-r2/r3

Add configs for lazor rev2 and rev3. There are no relevant deltas
between rev1 and rev2, so just add the rev2 compatible string to the
rev1 config.

One important delta in rev3 is a switch of the power supply for the
onboard USB hub from 'pp3300_l7c' to 'pp3300_a' + a load switch. The
actual regulator switch is done by the patch 'arm64: dts: qcom:
sc7180-trogdor: Make pp3300_a the default supply for pp3300_hub',
since it affects the entire trogdor platform. Here we only add the
.dts files for lazor rev3 and replace the generic compatible entries
in the rev1 .dts files.

Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lore.kernel.org/r/20201106140125.v3.1.I5a75056d573808f40fed22ab7d28ea6be5819f84@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>