#
d2912cb1 |
|
04-Jun-2019 |
Thomas Gleixner <tglx@linutronix.de> |
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
#
48f66937 |
|
31-May-2017 |
Tony Lindgren <tony@atomide.com> |
ARM: OMAP2+: Remove unused legacy code for McBSP We are now booting all mach-omap2 in device tree only mode. Any code that is only called in legacy boot mode where of_have_populated_dt() is not set is safe to remove now. Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
|
#
3774bec7 |
|
30-May-2016 |
Peter Ujfalusi <peter.ujfalusi@ti.com> |
ARM: OMAP2+: McBSP: Remove the old iclk allow/deny idle code The new pdata callback (force_ick_on) is now used by the driver and the old callback related code can be removed. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
|
#
c26c84c9 |
|
30-May-2016 |
Peter Ujfalusi <peter.ujfalusi@ti.com> |
ARM: OMAP3: pdata-quirks: Add support for McBSP2/3 sidetone handling McBSP2/3 module's sidetone module operates using the module's ICLK clock. When the Sidetone is in use the interface clock of the module must not idle. To prevent the iclk idling the driver expects to have pdata callback to call. With this patch the callback is going to be set up for DT boot also. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
|
#
53ae95f6 |
|
30-May-2016 |
Peter Ujfalusi <peter.ujfalusi@ti.com> |
ARM: OMAP3: McBSP: New callback for McBSP2/3 ICLK idle configuration McBSP2/3 module's sidetone module operates using the module's ICLK clock. When the Sidetone is in use the interface clock of the module must not idle. The new callback expects to receive the *clk of the module's ick and not the id number of the McBSP. This will allow us more cleanups and going to simplify the ICLK handling. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
|
#
7a90da2a |
|
11-Oct-2013 |
Tero Kristo <t-kristo@ti.com> |
ARM: OMAP3: McBSP: do not access CM register directly McBSP driver require special hacks to enable/disable the autoidle feature for its interface clock for the proper function of the sidetone hardware. Currently the driver just writes CM registers directly, which should be avoided. Thus, changed the driver to use the new deny/allow_autoidle clock API calls. Signed-off-by: Tero Kristo <t-kristo@ti.com> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
|
#
c1d1cd59 |
|
26-Jan-2013 |
Paul Walmsley <paul@pwsan.com> |
ARM: OMAP2+: omap_device: remove obsolete pm_lats and early_device code Remove now-obsolete code from arch/arm/mach-omap2/omap_device.c. This mostly consists of removing the first attempt at device PM latency handling. This was never really used, has been replaced by the common dev_pm_qos code, and needs to go away as part of the DT conversion. Also, the early platform_device creation code has been removed, as it appears to be unused. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com>
|
#
b76c8b19 |
|
11-Jan-2013 |
Tony Lindgren <tony@atomide.com> |
ARM: OMAP2+: Use omap initcalls This way the initcalls don't run on other SoCs on multiplatform kernels. Otherwise we'll get something like this when booting on vexpress: omap_hwmod: _ensure_mpu_hwmod_is_setup: MPU initiator hwmod mpu not yet registered ... WARNING: at arch/arm/mach-omap2/pm.c:82 _init_omap_device+0x74/0x94() _init_omap_device: could not find omap_hwmod for mpu ... omap-dma-engine omap-dma-engine: OMAP DMA engine driver ... Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
|
#
45c3eb7d |
|
30-Nov-2012 |
Tony Lindgren <tony@atomide.com> |
ARM: OMAP: Move plat-omap/dma-omap.h to include/linux/omap-dma.h Based on earlier discussions[1] we attempted to find a suitable location for the omap DMA header in commit 2b6c4e73 (ARM: OMAP: DMA: Move plat/dma.h to plat-omap/dma-omap.h) until the conversion to dmaengine is complete. Unfortunately that was before I was able to try to test compile of the ARM multiplatform builds for omap2+, and the end result was not very good. So I'm creating yet another all over the place patch to cut the last dependency for building omap2+ for ARM multiplatform. After this, we have finally removed the driver dependencies to the arch/arm code, except for few drivers that are being worked on. The other option was to make the <plat-omap/dma-omap.h> path to work, but we'd have to add some new header directory to for multiplatform builds. Or we would have to manually include arch/arm/plat-omap/include again from arch/arm/Makefile for omap2+. Neither of these alternatives sound appealing as they will likely lead addition of various other headers exposed to the drivers, which we want to avoid for the multiplatform kernels. Since we already have a minimal include/linux/omap-dma.h, let's just use that instead and add a note to it to not use the custom omap DMA functions any longer where possible. Note that converting omap DMA to dmaengine depends on dmaengine supporting automatically incrementing the FIFO address at the device end, and converting all the remaining legacy drivers. So it's going to be few more merge windows. [1] https://patchwork.kernel.org/patch/1519591/# cc: Russell King <linux@arm.linux.org.uk> cc: Kevin Hilman <khilman@ti.com> cc: "Benoît Cousson" <b-cousson@ti.com> cc: Herbert Xu <herbert@gondor.apana.org.au> cc: "David S. Miller" <davem@davemloft.net> cc: Vinod Koul <vinod.koul@intel.com> cc: Dan Williams <djbw@fb.com> cc: Mauro Carvalho Chehab <mchehab@infradead.org> cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> cc: David Woodhouse <dwmw2@infradead.org> cc: Kyungmin Park <kyungmin.park@samsung.com> cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> cc: Tomi Valkeinen <tomi.valkeinen@ti.com> cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> cc: Hans Verkuil <hans.verkuil@cisco.com> cc: Vaibhav Hiremath <hvaibhav@ti.com> cc: Lokesh Vutla <lokeshvutla@ti.com> cc: Rusty Russell <rusty@rustcorp.com.au> cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> cc: Afzal Mohammed <afzal@ti.com> cc: linux-crypto@vger.kernel.org cc: linux-media@vger.kernel.org cc: linux-mtd@lists.infradead.org cc: linux-usb@vger.kernel.org cc: linux-fbdev@vger.kernel.org Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
|
#
d9a16f9a |
|
29-Oct-2012 |
Paul Walmsley <paul@pwsan.com> |
ARM: OMAP2+: PRCM: split and relocate the PRM/CM globals setup Split omap2_set_globals_prcm() into PRM, CM, and PRCM_MPU variants, since these are all separate IP blocks. This should make it easier to move the PRM, CM, PRCM_MPU code into drivers/ in future patchsets. At this point arch/arm/plat-omap/include/plat/prcm.h is empty; a subsequent patch will remove it, and remove the #include from all the files that #include it. Signed-off-by: Paul Walmsley <paul@pwsan.com> Tested-by: Vaibhav Hiremath <hvaibhav@ti.com>
|
#
25c7d49e |
|
02-Oct-2012 |
Tony Lindgren <tony@atomide.com> |
ARM: OMAP: Make omap_device local to mach-omap2 Let's make omap_device local to mach-omap2 for ARM common zImage support. Signed-off-by: Tony Lindgren <tony@atomide.com>
|
#
2b6c4e73 |
|
15-Oct-2012 |
Lokesh Vutla <lokeshvutla@ti.com> |
ARM: OMAP: DMA: Move plat/dma.h to plat-omap/dma-omap.h Move plat/dma.h to plat-omap/dma-omap.h as part of single zImage work Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
|
#
2203747c |
|
24-Aug-2012 |
Arnd Bergmann <arnd@arndb.de> |
ARM: omap: move platform_data definitions Platform data for device drivers should be defined in include/linux/platform_data/*.h, not in the architecture and platform specific directories. This moves such data out of the omap include directories Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Tony Lindgren <tony@atomide.com> Cc: Kevin Hilman <khilman@ti.com> Cc: "Benoît Cousson" <b-cousson@ti.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Omar Ramirez Luna <omar.ramirez@ti.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Jarkko Nikula <jarkko.nikula@bitmer.com> Cc: Liam Girdwood <lrg@ti.com> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Jean Pihet <j-pihet@ti.com> Cc: J Keerthy <j-keerthy@ti.com> Cc: linux-omap@vger.kernel.org
|
#
dbc04161 |
|
31-Aug-2012 |
Tony Lindgren <tony@atomide.com> |
ARM: OMAP: Split plat/hardware.h, use local soc.h for omap2+ As the plat and mach includes need to disappear for single zImage work, we need to remove plat/hardware.h. Do this by splitting plat/hardware.h into omap1 and omap2+ specific files. The old plat/hardware.h already has omap1 only defines, so it gets moved to mach/hardware.h for omap1. For omap2+, we use the local soc.h that for now just includes the related SoC headers to keep this patch more readable. Note that the local soc.h still includes plat/cpu.h that can be dealt with in later patches. Let's also include plat/serial.h from common.h for all the board-*.c files. This allows making the include files local later on without patching these files again. Note that only minimal changes are done in this patch for the drivers/watchdog/omap_wdt.c driver to keep things compiling. Further patches are needed to eventually remove cpu_is_omap usage in the drivers. Also only minimal changes are done to sound/soc/omap/* to remove the unneeded includes and to define OMAP44XX_MCPDM_L3_BASE locally so there's no need to include omap44xx.h. While at it, also sort some of the includes in the standard way. Cc: linux-watchdog@vger.kernel.org Cc: alsa-devel@alsa-project.org Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Jarkko Nikula <jarkko.nikula@bitmer.com> Cc: Liam Girdwood <lrg@ti.com> Acked-by: Wim Van Sebroeck <wim@iguana.be> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
|
#
7d7e1eba |
|
27-Aug-2012 |
Tony Lindgren <tony@atomide.com> |
ARM: OMAP2+: Prepare for irqs.h removal As the interrupts should only be defined in the platform_data, and eventually coming from device tree, there's no need to define them in header files. Let's remove the hardcoded references to irqs.h and fix up the includes so we don't rely on headers included in irqs.h. Note that we're defining OMAP_INTC_START as 0 to the interrupts. This will be needed when we enable SPARSE_IRQ. For some drivers we need to add #include <plat/cpu.h> for now until these drivers are fixed to remove cpu_is_omapxxxx() usage. While at it, sort som of the includes the standard way, and add the trailing commas where they are missing in the related data structures. Note that for drivers/staging/tidspbridge we just define things locally. Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
|
#
e586e955 |
|
16-Aug-2012 |
Peter Ujfalusi <peter.ujfalusi@ti.com> |
ARM: OMAP2+: McBSP: Do not create legacy devices when booting with DT data Only create the devices in a legacy way if we do not have the DT data. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
|
#
8fef6263 |
|
16-Aug-2012 |
Peter Ujfalusi <peter.ujfalusi@ti.com> |
ARM/ASoC: omap-mcbsp: Remove CLKR/FSR mux configuration code Remove the feature to configure the CLKR/FSR mux on McBSP port with 6pin configuration. When moving to devicetree these callback can no longer be used in a clean way anymore. If a board require to change the 6pin port to work in 4pin setup it needs to set up the mux in the board file. For OMAP2/3: u32 devconf0; /* McBSP1 CLKR/FSR signal to be connected to CLKX/FSX pin */ devconf0 = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0); devconf0 |= OMAP2_MCBSP1_CLKR_MASK | OMAP2_MCBSP1_FSR_MASK; omap_ctrl_writel(devconf0, OMAP2_CONTROL_DEVCONF0); For OMAP4: u32 mcbsp_pad; /* McBSP4 CLKR/FSR signal to be connected to CLKX/FSX pin */ mcbsp_pad = omap4_ctrl_pad_readl(OMAP2_CONTROL_DEVCONF0); mcbsp_pad |= ((1 << 31) | (1 << 30)); omap4_ctrl_pad_writel(mcbsp_pad, OMAP2_CONTROL_DEVCONF0); In case when the kernel is booted with DT blob the pinctrl-single will be provided as soon as it is enabled on the platform. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
|
#
cafebc4a |
|
16-Aug-2012 |
Peter Ujfalusi <peter.ujfalusi@ti.com> |
ARM: OMAP: mcbsp: Enable FIFO use for OMAP2430 On OMAP2430 all McBSP ports have 128 word long buffer, enable the use of the FIFO for the audio stack. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
|
#
f199131a |
|
16-Aug-2012 |
Peter Ujfalusi <peter.ujfalusi@ti.com> |
ARM/ASoC: omap-mcbsp: Move OMAP2+ clock parenting code to ASoC driver Move the McBSP CLKS re-parenting code to ASoC driver from arch/arm/mach-omap2. The call fort the re-parenting has been already limited to OMAP2+ SoC in the ASoC driver. There is no longer need to have callback function for it. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
|
#
40c0764b |
|
08-Mar-2012 |
Peter Ujfalusi <peter.ujfalusi@ti.com> |
ARM: OMAP2+: McBSP: Correct CLKR/FSR clock source mux configuration On OMAP2/3 McBSP1 port has 6 pin setup, while on OMAP4 the port is McBSP4. Implement the CLKR/FSR clock mux selection for OMAP4, and make sure that we add the correct callback for the correct port across supported OMAP versions. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
|
#
45656b44 |
|
14-Feb-2012 |
Peter Ujfalusi <peter.ujfalusi@ti.com> |
ASoC: omap-mcbsp: Create a single driver for McBSP The OMAP McBSP driver stack used to contain two different drivers. One of them was used as kind low-level access to the IP, while the other driver was the ASoC DAI driver. There were global, shared structures, in different places, the McBSP instances are reffered with id numbers (sometimes 0 based, in other cases 1 based id numbers). Create one single driver for OMAP McBSP with name: omap-mcbsp. Convert the old omap-mcbsp driver initially to be a library for the omap-mcbsp DAI driver. With this change we can get rid of all global variables, structures. Further cleanup is coming... Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Grazvydas Ignotas <notasas@gmail.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
|
#
0210dc4e |
|
25-Jan-2012 |
Peter Ujfalusi <peter.ujfalusi@ti.com> |
ARM: OMAP: mcbsp: Convert core driver to proper platform driver Convert the plat-omap/mcbsp.c driver to be proper platform driver. Remove the omap_mcbsp_init function call which was called from mach-omap1/2/mcbsp.c to register the platform driver for the just created platform device in the same function. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Tested-by: Grazvydas Ignotas <notasas@gmail.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
|
#
9cf793f9 |
|
20-Feb-2012 |
Kevin Hilman <khilman@ti.com> |
ARM: OMAP: convert omap_device_build() and callers to __init Building omap_devices should only be done at init time, and since omap_device_build() is using early_platform calls which are also __init, this ensures that omap_device isn't trying to use functions that disappear. Signed-off-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
|
#
da76250e |
|
15-Dec-2011 |
Peter Ujfalusi <peter.ujfalusi@ti.com> |
OMAP4: mcbsp: Enable FIFO usage All McBSP instances on OMAP4 has 128 word long FIFO Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
|
#
0c8551e5 |
|
12-Dec-2011 |
Jarkko Nikula <jarkko.nikula@bitmer.com> |
ARM: OMAP: mcbsp: Fix possible memory corruption Commits 09d28d ("ARM: OMAP: mcbsp: Start generalize omap2_mcbsp_set_clks_src") and 7bc0c4 ("ARM: OMAP: mcbsp: Start generalize signal muxing functions") incorrectly set two struct omap_mcbsp_platform_data fields after omap_device_build_ss and kfree calls. Fix this by moving these pdata assignments before those calls. Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Reported-by: NeilBrown <neilb@suse.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
|
#
f718e2c0 |
|
10-Aug-2011 |
Benoit Cousson <b-cousson@ti.com> |
ARM: OMAP2+: devices: Remove all omap_device_pm_latency structures Remove all these duplicated structures since a default one is now available. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
|
#
7bc0c4ba |
|
26-Sep-2011 |
Jarkko Nikula <jarkko.nikula@bitmer.com> |
ARM: OMAP: mcbsp: Start generalize signal muxing functions This generalizes the omap2_mcbsp1_mux_clkr_src and omap2_mcbsp1_mux_fsr_src implementation between generic McBSP and OMAP2 specific McBSP code. These functions are used to select source for CLKR and FSR signals on OMAP2+. Start generalizing the code by implementing an optional mux_signal function pointer in platform data that will implement the actual muxing and which is called now from omap2_mcbsp1_mux_clkr_src and omap2_mcbsp1_mux_fsr_src. These functions are to be removed later and cleanup the API so that mux_signal gets its arguments directly from client code. Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Tony Lindgren <tony@atomide.com>
|
#
09d28d2c |
|
26-Sep-2011 |
Jarkko Nikula <jarkko.nikula@bitmer.com> |
ARM: OMAP: mcbsp: Start generalize omap2_mcbsp_set_clks_src This generalizes the omap2_mcbsp_set_clks_src implementation between generic McBSP and OMAP2 specific McBSP code. Currently this function is used to select either internal fclk or clks pin as a McBSP CLKS source on OMAP2+. Implement generalization by having an optional set_clk_src function pointer in platform data that is used to select parent for a given clock. Idea is to pass higher level source clock name (later coming from client driver) that platform specific code will map to platform specific clock name. API cleanup between McBSP and client code comes later. Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Tony Lindgren <tony@atomide.com>
|
#
1743d14f |
|
26-Sep-2011 |
Jarkko Nikula <jhnikula@gmail.com> |
ARM: OMAP: mcbsp: Move sidetone clock management to mach-omap2/mcbsp.c Active sidetone requires that McBSP interface clock doesn't idle and there is no mechanism in hwmod to turn autoidling on/off in runtime. McBSP2 and 3 in OMAP34xx share their interface clock with McBSP sidetone module and that interface clock must be active when the sidetone is operating. Sidetone has its own autoidle bit which should keep the interface clock active but it is broken. Putting the McBSP core to no-idle mode when the sidetone is active is no good either since it results to higher power consumption when using the threshold based DMA transfers. For making the McBSP code more generic, move this sidetone clock management with fixme comments to mach-omap2/mcbsp.c and pass pointer to it via platform data. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Cc: Paul Wamsley <paul@pwsan.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Tony Lindgren <tony@atomide.com>
|
#
88408230 |
|
26-Sep-2011 |
Jarkko Nikula <jarkko.nikula@bitmer.com> |
ARM: OMAP: mcbsp: Make tranceiver configuration control register access generic McBSP transmit and receive configuration control registers must be set up for OMAP2430 and later. Replace is_omap tests in generic code with a new feature flag has_ccr in platform data so that there is no need to change code for any upcoming OMAP version. Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Tony Lindgren <tony@atomide.com>
|
#
1a645884 |
|
26-Sep-2011 |
Jarkko Nikula <jarkko.nikula@bitmer.com> |
ARM: OMAP: mcbsp: Make wakeup control generic Currently wakeup control code is compiled only when CONFIG_ARCH_OMAP3 is set even it should be available for CONFIG_ARCH_OMAP4 only builds also. Fix this by making wakeup control generic so that it is executed whenever new feature flag has_wakeup in platform data is set. Currently flag is set for McBSP config types 3 and 4. Remove also old comments about idle mode settings and HW bug workarounds that were not updated during hwmod conversion. Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Tony Lindgren <tony@atomide.com>
|
#
cdc71514 |
|
26-Sep-2011 |
Jarkko Nikula <jarkko.nikula@bitmer.com> |
ARM: OMAP: mcbsp: Implement generic register access Register access can be made more generic by calculating register address offsets runtime from common register definitions and by using reg_size and reg_step variables that are passed via platform data. Common register definitions are possible since McBSP registers are ordered similarly between OMAP versions. Remove also references to OMAP2+ specific config_type variable from generic McBSP code since other variables and feature flags are better to carry needed information from platform code. Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Tony Lindgren <tony@atomide.com>
|
#
3528c58e |
|
21-Jul-2011 |
Kevin Hilman <khilman@ti.com> |
OMAP: omap_device: when building return platform_device instead of omap_device All of the device init and device driver interaction with omap_device is done using platform_device pointers. To make this more explicit, have omap_device return a platform_device pointer instead of an omap_device pointer. All current users of the omap_device pointer were only using it to get at the platform_device pointer or struct device pointer, so fixing all of the users was trivial. This also makes it more difficult for device init code to directly access members of struct omap_device, and allows for easier changing of omap_device internals. Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
|
#
25985edc |
|
30-Mar-2011 |
Lucas De Marchi <lucas.demarchi@profusion.mobi> |
Fix common misspellings Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
|
#
9504ba64 |
|
24-Feb-2011 |
Kishon Vijay Abraham I <kishon@ti.com> |
OMAP: McBSP: APIs to pass DMA params from McBSP driver to client drivers After McBSP driver is hwmod adapted, the information about the hw would be obtained from the hwmod database by the mcbsp driver. Since DMA programming is handled by the client driver, APIs are provided to pass the DMA channel number and base address of data register required by the client driver for DMA programming. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Charulatha V <charu@ti.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
|
#
e95496d4 |
|
24-Feb-2011 |
Kishon Vijay Abraham I <kishon@ti.com> |
OMAP: McBSP: Add pm runtime support Add pm runtime support for McBSP driver. Reference to fclk is not removed because it is required when the functional clock is switched from one source to another. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
|
#
64bcbd33 |
|
24-Feb-2011 |
Kishon Vijay Abraham I <kishon@ti.com> |
OMAP2+: McBSP: hwmod adaptation for McBSP Modify OMAP2+ McBSP to use omap hwmod framework APIs Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Charulatha V <charu@ti.com> Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
|
#
3cf32bba |
|
24-Feb-2011 |
Kishon Vijay Abraham I <kishon@ti.com> |
OMAP: McBSP: Convert McBSP to platform device model Implement McBSP as platform device and add support for registering through platform device layer using resource structures. Later in this patch series, OMAP2+ McBSP driver would be modified to use hwmod framework after populating the omap2+ hwmod database. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
|
#
59b479e0 |
|
27-Jan-2011 |
Tony Lindgren <tony@atomide.com> |
omap: Start using CONFIG_SOC_OMAP We want to have just CONFIG_ARCH_OMAP2, 3 and 4. The rest are nowadays just subcategories of these. Search and replace the following: ARCH_OMAP2420 SOC_OMAP2420 ARCH_OMAP2430 SOC_OMAP2430 ARCH_OMAP3430 SOC_OMAP3430 No functional changes. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Thomas Weber <weber@corscience.de> Acked-by: Sourav Poddar <sourav.poddar@ti.com>
|
#
4367260c |
|
08-Oct-2010 |
Jarkko Nikula <jhnikula@gmail.com> |
OMAP: McBSP: Remove null omap44xx ops comment It seems these comments where accidentally added so remove them. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Paul Walmsley <paul@pwsan.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
|
#
425925dd |
|
08-Oct-2010 |
Jarkko Nikula <jhnikula@gmail.com> |
OMAP: McBSP: Fix CLKR and FSR signal muxing Fix bit clear. Now it clears all other bits than mask bit where it should clear only it. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Paul Walmsley <paul@pwsan.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
|
#
4814ced5 |
|
08-Oct-2010 |
Paul Walmsley <paul@pwsan.com> |
OMAP: control: move plat-omap/control.h to mach-omap2/control.h Only OMAP2+ platforms have the System Control Module (SCM) IP block. In the past, we've kept the SCM header file in plat-omap. This has led to abuse - device drivers including it; includes being added that create implicit dependencies on OMAP2+ builds; etc. In response, move the SCM headers into mach-omap2/. As part of this, remove the direct SCM access from the OMAP UDC driver. It was clearly broken. The UDC code needs an indepth review for use on OMAP2+ chips. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Cory Maccarrone <darkstar6262@gmail.com> Cc: Kyungmin Park <kyungmin.park@samsung.com>
|
#
d1358657 |
|
08-Oct-2010 |
Paul Walmsley <paul@pwsan.com> |
OMAP: McBSP: implement functional clock switching via clock framework Previously the OMAP McBSP ASoC driver implemented CLKS switching by using omap_ctrl_{read,write}l() directly. This is against policy; the OMAP System Control Module functions are not intended to be exported to drivers. These symbols are no longer exported, so as a result, the OMAP McBSP ASoC driver does not build as a module. Resolve the CLKS clock changing portion of this problem by creating a clock parent changing function that lives in arch/arm/mach-omap2/mcbsp.c, and modify the ASoC driver to use it. Due to the unfortunate way that McBSP support is implemented in ASoC and the OMAP tree, this symbol must be exported for use by sound/soc/omap/omap-mcbsp.c. Going forward, the McBSP device driver should be moved from arch/arm/*omap* into drivers/ or sound/soc/* and the CPU DAI driver should be implemented as a platform_driver as many other ASoC CPU DAI drivers are. These two steps should resolve many of the layering problems, which will rapidly reappear during a McBSP hwmod/PM runtime conversions. Signed-off-by: Paul Walmsley <paul@pwsan.com> Acked-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
|
#
cf4c87ab |
|
08-Oct-2010 |
Paul Walmsley <paul@pwsan.com> |
OMAP: McBSP: implement McBSP CLKR and FSR signal muxing via mach-omap2/mcbsp.c The OMAP ASoC McBSP code implemented CLKR and FSR signal muxing via direct System Control Module writes on OMAP2+. This required the omap_ctrl_{read,write}l() functions to be exported, which is against policy: the only code that should call those functions directly is OMAP core code, not device drivers. omap_ctrl_{read,write}*() are no longer exported, so the driver no longer builds as a module. Fix the pinmuxing part of the problem by removing calls to omap_ctrl_{read,write}l() from the OMAP ASoC McBSP code and implementing signal muxing functions in arch/arm/mach-omap2/mcbsp.c. Due to the unfortunate way that McBSP support is implemented in ASoC and the OMAP tree, these symbols must be exported for use by sound/soc/omap/omap-mcbsp.c. Going forward, the McBSP device driver should be moved from arch/arm/*omap* into drivers/ or sound/soc/*, and the CPU DAI driver should be implemented as a platform_driver as many other ASoC CPU DAI drivers are. These two steps should resolve many of the layering problems, which will rapidly reappear during a McBSP hwmod/PM runtime conversion. Signed-off-by: Paul Walmsley <paul@pwsan.com> Acked-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
|
#
7193559a |
|
31-Aug-2010 |
Jarkko Nikula <jhnikula@gmail.com> |
omap2: McBSP: Remove mux code for OMAP2420 McBSP2 and do cleanups This 'legacy' OMAP2420 McBSP2 muxing code is currently broken after recent conversion to new mux code. The omap_mcbsp_request calling this code is usually called after booting whereas the omap_mux_init_signal is __init marked so null pointer dereference would occur. Fix this by removing the muxing code and let the bootloader or board file to do it if necessary. Remove also omap2_mcbsp_ops as there is no use for it. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
|
#
f99bf16d |
|
05-Jul-2010 |
Tony Lindgren <tony@atomide.com> |
omap: mux: Convert 2420 platform init code to use new mux code Convert 2420 platform init code to use new mux code Signed-off-by: Tony Lindgren <tony@atomide.com>
|
#
451fd82d |
|
02-Jun-2010 |
Peter Ujfalusi <peter.ujfalusi@nokia.com> |
OMAP3: McBSP: Change the way how the FIFO is handled Use the actual FIFO size in words as buffer_size on OMAP3. Change the threshold configuration to use 1 based numbering, when specifying the allowed threshold maximum or the McBSP threshold value. Set the default maximum threshold to (buffer_size - 0x10) intialy. >From users of McBSP, now it is expected to use this method. Asking for threshold 1 means that the value written to threshold registers are going to be 0, which means 1 word threshold. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolsfonmicro.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
|
#
9319b9da |
|
11-May-2010 |
Jorge Eduardo Candelaria <jorge.candelaria@ti.com> |
ARM: McBSP: Fix request for irq in OMAP4 In OMAP4, there is only one irq line for TX and RX paths. Use the correct irq line to avoid errors at runtime. Also, request irq line only once (instead of requesting for TX and RX). Signed-off-by: Jorge Eduardo Candelaria <jorge.candelaria@ti.com> Acked-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
|
#
5a0e3ad6 |
|
24-Mar-2010 |
Tejun Heo <tj@kernel.org> |
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
|
#
d912fa92 |
|
21-Feb-2010 |
Eero Nurkkala <ext-eero.nurkkala@nokia.com> |
McBSP: OMAP3: Add sidetone feature Add sidetone feature to McBSP instances 2 and 3 on OMAP3 based devices. Signed-off-by: Ilkka Koskinen <ilkka.koskinen@nokia.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Jarkko Nikula <jhnikula@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
|
#
c8c99699 |
|
15-Feb-2010 |
Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> |
omap: McBSP: Introduce caching in register write operations Determine cache size required per McBSP port at init time, based on processor type running on. Allocate space for storing cached copies of McBSP register values at port request. Modify omap_msbcp_write() function to update the cache with every register write operation. Modify omap_mcbsp_read() to support reading from cache or hardware. Update MCBSP_READ() macro for modified omap_mcbsp_read() function API. Introduce a new macro that reads from the cache. Tested on OMAP1510 based Amstrad Delta using linux-omap for-next, commit fb7380d70e041e4b3892f6b19dff7efb609d15a4 (2.6.33-rc3+ dated 2010-01-11). Compile-tested with: omap_perseus2_730_defconfig, omap_generic_1610_defconfig, omap_generic_2420_defconfig, omap_2430sdp_defconfig, omap_3430sdp_defconfig, omap_4430sdp_defconfig with CONFIG_OMAP_MCBSP=y selected. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Jarkko Nikula <jhnikula@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
|
#
a8eb7ca0 |
|
12-Feb-2010 |
Tony Lindgren <tony@atomide.com> |
omap3: Replace ARCH_OMAP34XX with ARCH_OMAP3 Replace ARCH_OMAP34XX with ARCH_OMAP3 Signed-off-by: Tony Lindgren <tony@atomide.com>
|
#
ce491cf8 |
|
20-Oct-2009 |
Tony Lindgren <tony@atomide.com> |
omap: headers: Move remaining headers from include/mach to include/plat Move the remaining headers under plat-omap/include/mach to plat-omap/include/plat. Also search and replace the files using these headers to include using the right path. This was done with: #!/bin/bash mach_dir_old="arch/arm/plat-omap/include/mach" plat_dir_new="arch/arm/plat-omap/include/plat" headers=$(cd $mach_dir_old && ls *.h) omap_dirs="arch/arm/*omap*/ \ drivers/video/omap \ sound/soc/omap" other_files="drivers/leds/leds-ams-delta.c \ drivers/mfd/menelaus.c \ drivers/mfd/twl4030-core.c \ drivers/mtd/nand/ams-delta.c" for header in $headers; do old="#include <mach\/$header" new="#include <plat\/$header" for dir in $omap_dirs; do find $dir -type f -name \*.[chS] | \ xargs sed -i "s/$old/$new/" done find drivers/ -type f -name \*omap*.[chS] | \ xargs sed -i "s/$old/$new/" for file in $other_files; do sed -i "s/$old/$new/" $file done done for header in $(ls $mach_dir_old/*.h); do git mv $header $plat_dir_new/ done Signed-off-by: Tony Lindgren <tony@atomide.com>
|
#
7e4f943b |
|
20-Aug-2009 |
Peter Ujfalusi <peter.ujfalusi@nokia.com> |
OMAP3: McBSP: Lower the maximum buffersize for McBSP1, 3, 4, 5 Do not allow applications to use the full buffer found on McBSP1,3,4,5. Using the full buffer in threshold mode causes the McBSP buffer to run dry, which can be observed as channels are switching (in reality the channels are shifting). Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
|
#
a1a56f5f |
|
20-Aug-2009 |
Eduardo Valentin <eduardo.valentin@nokia.com> |
OMAP: McBSP: Create and export max_(r|t)x_thres property This patch export through sysfs two properties to configure maximum threshold for transmission and reception on each mcbsp instance. Also, it exports two helper functions to allow mcbsp users to read this values. Signed-off-by: Eduardo Valentin <eduardo.valentin@nokia.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
|
#
a5b92cc3 |
|
28-Jul-2009 |
Syed Rafiuddin <rafiuddin.syed@ti.com> |
ARM: OMAP4: Add McBSP support This patch creates McBSP support on OMAP4430 development platform. This patch includes corresponding base address changes for OMAP4. Signed-off-by: Syed Rafiuddin <rafiuddin.syed@ti.com>
|
#
efda2b4c |
|
08-Jul-2009 |
Jaswinder Singh Rajput <jaswinder@kernel.org> |
ARM: includecheck fix: mach-omap2/mcbsp.c fix the following 'make includecheck' warning: arch/arm/mach-omap2/mcbsp.c: mach/irqs.h is included more than once. Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Acked-by: Eduardo Valentin <eduardo.valentin@nokia.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
#
ee0049d4 |
|
10-Jul-2009 |
Huang Weiyi <weiyi.huang@gmail.com> |
[ARM] remove duplicated #include Remove duplicated #include('s) in arch/arm/mach-mx3/devices.c arch/arm/mach-omap1/mcbsp.c arch/arm/mach-omap2/mcbsp.c arch/arm/plat-stmp3xxx/pinmux.c Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
#
b820ce4e |
|
23-Jan-2009 |
Russell King <rmk@dyn-67.arm.linux.org.uk> |
[ARM] omap: mcbsp: convert to use fck/ick clocks directly Rather than introducing a special 'mcbsp_clk' with code behind it in mach-omap*/mcbsp.c to handle the SoC specifics, arrange for the mcbsp driver to be like any other driver. mcbsp requests its fck and ick clocks directly, and the SoC specific code deals with selecting the correct clock. There is one oddity to deal with - OMAP1 fiddles with the DSP clocks and DSP reset, so we move this to the two callback functions. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
#
06151158 |
|
29-Jan-2009 |
Stanley.Miao <stanley.miao@windriver.com> |
ARM: OMAP: Fix McBSP spin_lock deadlock A spin_lock deadlock will occur when omap_mcbsp_request() is invoked. omap_mcbsp_request() \- clk_enable(mcbsp->clk) [takes and holds clockfw_lock] \- omap2_clk_enable() \- _omap2_clk_enable() \- omap_mcbsp_clk_enable() \- clk_enable(child clock) [tries for clockfw_lock again] mcbsp_clk is a virtual clock and it comprises several child clocks. when enable mcbsp_clk in omap_mcbsp_request(), the enable function of mcbsp_clk will enable its child clocks, then the deadlock occurs. The solution is to remove the virtual clock and enable these child clocks in omap_mcbsp_request() directly. Signed-off-by: Stanley.Miao <stanley.miao@windriver.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
|
#
dd7667aa |
|
15-Jan-2009 |
Tony Lindgren <tony@atomide.com> |
ARM: OMAP: Fix compile for various McBSP Include irqs.h or cpu.h directly as needed to fix omap builds. Signed-off-by: Tony Lindgren <tony@atomide.com>
|
#
80b02c17 |
|
08-Jan-2009 |
Russell King <rmk@dyn-67.arm.linux.org.uk> |
[ARM] fix AT91, davinci, h720x, ks8695, msm, mx2, mx3, netx, omap1, omap2, pxa, s3c arch/arm/mach-at91/at91cap9.c:337: error: 'NR_AIC_IRQS' undeclared here (not in a function) arch/arm/mach-at91/at91rm9200.c:301: error: 'NR_AIC_IRQS' undeclared here (not in a function) arch/arm/mach-at91/at91sam9260.c:351: error: 'NR_AIC_IRQS' undeclared here (not in a function) arch/arm/mach-at91/at91sam9261.c:287: error: 'NR_AIC_IRQS' undeclared here (not in a function) arch/arm/mach-at91/at91sam9263.c:312: error: 'NR_AIC_IRQS' undeclared here (not in a function) arch/arm/mach-at91/at91sam9rl.c:304: error: 'NR_AIC_IRQS' undeclared here (not in a function) arch/arm/mach-h720x/h7202-eval.c:38: error: implicit declaration of function 'IRQ_CHAINED_GPIOB' arch/arm/mach-ks8695/devices.c:46: error: 'KS8695_IRQ_WAN_RX_STATUS' undeclared here (not in a function) arch/arm/mach-msm/devices.c:28: error: 'INT_UART1' undeclared here (not in a function) arch/arm/mach-mx2/devices.c:233: error: 'MXC_GPIO_IRQ_START' undeclared here (not in a function) arch/arm/mach-mx3/devices.c:128: error: 'MXC_GPIO_IRQ_START' undeclared here (not in a function) arch/arm/mach-omap1/mcbsp.c:140: error: 'INT_730_McBSP1RX' undeclared here (not in a function) arch/arm/mach-omap1/mcbsp.c:165: error: 'INT_McBSP1RX' undeclared here (not in a function) arch/arm/mach-omap1/mcbsp.c:200: error: 'INT_McBSP1RX' undeclared here (not in a function) arch/arm/mach-omap2/board-apollon.c:286: error: implicit declaration of function 'omap_set_gpio_direction' arch/arm/mach-omap2/mcbsp.c:154: error: 'INT_24XX_MCBSP1_IRQ_RX' undeclared here (not in a function) arch/arm/mach-omap2/mcbsp.c:181: error: 'INT_24XX_MCBSP1_IRQ_RX' undeclared here (not in a function) arch/arm/mach-pxa/e350.c:36: error: 'IRQ_BOARD_START' undeclared here (not in a function) arch/arm/plat-s3c/dev-i2c0.c:32: error: 'IRQ_IIC' undeclared here (not in a function) ... Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
#
05228c35 |
|
08-Oct-2008 |
Jarkko Nikula <jarkko.nikula@nokia.com> |
ARM: OMAP: Add support for OMAP2430 in McBSP Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
|
#
9c8e3a0f |
|
08-Oct-2008 |
Chandra Shekhar <x0044955@ti.com> |
ARM: OMAP: Add support for McBSP devices 3 - 5 on 34xx Based on Chandra's earlier patches in linux-omap tree. Signed-off-by: Chandra Shekhar <x0044955@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
|
#
b4b58f58 |
|
08-Oct-2008 |
Chandra Shekhar <x0044955@ti.com> |
ARM: OMAP: Allocate McBSP devices dynamically Based on Chandra's earlier patches in linux-omap tree. Note that omap1_mcbsp_check and omap2_mcbsp_check are no longer needed as there's now omap_mcbsp_check_valid_id() defined. Also some functions can now be marked __init. Signed-off-by: Chandra Shekhar <x0044955@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
|
#
d592dd1a |
|
04-Sep-2008 |
Russell King <rmk@dyn-67.arm.linux.org.uk> |
[ARM] omap: convert mcbsp to use ioremap() Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
#
65846909 |
|
03-Sep-2008 |
Russell King <rmk@dyn-67.arm.linux.org.uk> |
[ARM] omap: fix virtual vs physical address space confusions mcbsp is confused as to what takes a physical or virtual address. Fix the two instances where it gets it wrong. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
#
a09e64fb |
|
05-Aug-2008 |
Russell King <rmk@dyn-67.arm.linux.org.uk> |
[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach This just leaves include/asm-arm/plat-* to deal with. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
#
78673bc8 |
|
02-Jul-2008 |
Eduardo Valentin <eduardo.valentin@indt.org.br> |
ARM: OMAP: McBSP: Add support for mcbsp on mach-omap2 This patch adds support for mach-omap2 based on current mcbsp platform driver. Signed-off-by: Eduardo Valentin <eduardo.valentin@indt.org.br> Signed-off-by: Tony Lindgren <tony@atomide.com>
|