ARM: rework endianess selection

Choosing big-endian vs little-endian kernels in Kconfig has not worked
correctly since the introduction of CONFIG_ARCH_MULTIPLATFORM a long
time ago.

The problems is that CONFIG_BIG_ENDIAN depends on
ARCH_SUPPORTS_BIG_ENDIAN, which can set by any one platform
in the config, but would actually have to be supported by all
of them.

This was mostly ok for ARMv6/ARMv7 builds, since these are BE8 and
tend to just work aside from problems in nonportable device drivers.
For ARMv4/v5 machines, CONFIG_BIG_ENDIAN and CONFIG_ARCH_MULTIPLATFORM
were never set together, so this was disabled on all those machines
except for IXP4xx.

As IXP4xx can now become part of ARCH_MULTIPLATFORM, it seems better to
formalize this logic: all ARMv4/v5 platforms get an explicit dependency
on being either big-endian (ixp4xx) or little-endian (the rest). We may
want to fix ixp4xx in the future to support both, but it does not work
in LE mode at the moment.

For the ARMv6/v7 platforms, there are two ways this could be handled

a) allow both modes only for platforms selecting
'ARCH_SUPPORTS_BIG_ENDIAN' today, but only LE mode for the
others, given that these were added intentionally at some
point.

b) allow both modes everwhere, given that it was already possible
to build that way by e.g. selecting ARCH_VIRT, and that the
list is not an accurate reflection of which platforms may or
may not work.

Out of these, I picked b) because it seemed slighly more logical
to me.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

treewide: Add SPDX license identifier - Makefile/Kconfig

Add SPDX license identifiers to all Make/Kconfig files which:

- Have no license information of any form

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

GPL-2.0-only

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

soc: ti: Add ti_sci_pm_domains driver

Introduce a ti_sci_pm_domains driver to act as a generic pm domain
provider to allow each device to attach and associate it's ti-sci-id so
that it can be controlled through the TI SCI protocol.

This driver implements a simple genpd where each device node has a
phandle to the power domain node and also must provide an index which
represents the ID to be passed with TI SCI representing the device using
a single phandle cell. The driver manually parses the phandle to get the
cell value. Through this interface the genpd dev_ops start and stop
hooks will use TI SCI to turn on and off each device as determined by
pm_runtime usage.

Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>

ARM: Keystone: Enable ARCH_HAS_RESET_CONTROLLER

The Keystone 2 family of SoCs will use various Reset Controller
drivers for managing the resets of remote processor devices like
DSPs on the SoC, so select the ARCH_HAS_RESET_CONTROLLER option
by default to enable the Reset framework.

Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>

ARM: select PCI_DOMAINS config from ARCH_MULTIPLATFORM

PCI_DOMAINS config should be selected for any SoCs
having more than a single PCIe controller. Without PCI_DOMAINS
config, only one PCIe controller gets registered.

Select PCI_DOMAINS in ARCH_MULTIPLATFORM if PCI is selected, since
it doesn't harm even if a platform has a single PCIe port.
Also remove PCI_DOMAINS being selected from other platform
specific configs.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

ARM: stop *MIGHT_HAVE_PCI* config from being selected redundantly

*MIGHT_HAVE_PCI* config is already selected in ARCH_MULTIPLATFORM.
Don't select it redundantly in all ARCH_MULTIPLATFORM based machines.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

clocksource/drivers/keystone: Add the COMPILE_TEST option

Change the Kconfig option logic to fullfil with the current approach.

A new Kconfig option is added, CONFIG_KEYSTONE_TIMER and is selected by the
platform. Then the clocksource's Kconfig is changed to make this option
selectable by the user if the COMPILE_TEST option is set. Otherwise, it is
up to the platform's Kconfig to select the timer.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>

ARM: keystone: remove redundant depends on ARM_PATCH_PHYS_VIRT

KeyStone is Multi-platform. ARM_PATCH_PHYS_VIRT is already select'ed
by ARCH_MULTIPLATFORM.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>

ARM: keystone: Enable PINCTRL config

Some Keystone 2 devices utilize pinmuxing which requires PINCTRL
to be enabled. Therefore, enable PINCTRL for all Keystone 2 devices.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>

ARM: keystone: add pcie related options

Now that Keystone PCI controller is merged, add pcie related options
by default for keystone architecture so that driver can be enabled in
the build.

Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>

ARM: keystone requires ARM_PATCH_PHYS_VIRT

The dynamic relocation that the keystone platform performs
only works if we can pick the phys offset at boot time. It's
possible that there is another solution for this, but this
is the easiest workaround. Kernels with ARM_PATCH_PHYS_VIRT
are not portable across platforms, and I see no reason why
anyone would run a kernel without ARM_PATCH_PHYS_VIRT on
keystone.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>

ARM: select HAVE_SMP for V7 multi-platform

All V7 platforms can run SMP kernels, so make CONFIG_SMP visible for V7
multi-platform builds.

Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>

ARM: centralize common multi-platform kconfig options

Multi-platform requires various kconfig options to be selected, so
platforms don't need to select them individually.

Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Russell King <linux@arm.linux.org.uk>
Acked-by: Stephen Warren <swarren@nvidia.com>
Tested-by: Stephen Warren <swarren@wwwdotorg.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>

ARM: keystone: config: fix build warning when CONFIG_DMADEVICES is not set

Drop automatic selection of TI_EDMA from Keystone Kconfig file,
as it produces build warning in case if CONFIG_DMADEVICES is not set:

warning: (ARCH_KEYSTONE) selects TI_EDMA which has unmet direct dependencies (DMADEVICES && (ARCH_DAVINCI || ARCH_OMAP || ARCH_KEYSTONE))

Instead enable TI EDMA support from defconfig.

Reported-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

ARM: keystone: enable DMA zone for LPAE

Keystone II peripheral devices support 32-bit DMA and hence can access only
first 2GB of the memory address space. So set the platform dma_zone_size
to handle that case.

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>

ARM: keystone: enable big endian support

Keystone code is big endian compatible,
so mark it as one that supports big endian.

Note this patch just allows to select Big endian build
for ARCH_KEYSTONE, but it does not enable BE by default.

Signed-off-by: Taras Kondratiuk <taras.kondratiuk@linaro.org>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>

ARM: keystone: Select TI_EDMA to be able to enable SPI driver

Select the TI EDMA to be able to enable SPI driver on Keystone
SOCs. Keystone SOCs share the EDMA IP with other TI SOCs.

Note that EDMA support hasn't been added and tested yet for
Keystone SOC data(device tree), but building it, is harmless since
driver like SPI already takes care of supporting non-dma mode
in the absence of such data.

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>

ARM: keystone: Enable clock drivers

Enable common clock drivers on Keystone 2 based SOCs.

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>

ARM: keystone: drop useless HAVE_SCHED_CLOCK

The Kconfig symbol HAVE_SCHED_CLOCK got removed in v3.4,
with commit 6905a65879b5 ("ARM: Make the sched_clock
framework mandatory"). But a select statement for it popped up again
through commit 828989ad87af ("ARM: keystone: Add minimal TI Keystone
platform support"). Drop that statement, as it is useless.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
[santosh.shilimkar@ti.com: Minor edit in the subject]
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>

ARM: keystone: select ARM_ERRATA_798181 only for SMP

Selecting this symbol causes a build warning without SMP:

warning: (ARCH_KEYSTONE) selects ARM_ERRATA_798181 which has unmet direct dependencies (CPU_V7 && SMP)

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>

ARM: keystone: Enable SMP support on Keystone machines

Add basic SMP support for Keystone machines. This does not
include support for CPU hotplug for now.

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: arm@kernel.org

Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>

ARM: keystone: Add minimal TI Keystone platform support

Texas Instruments Keystone family of multi-core devices are
based on ARM Cortex A15. Patch adds basic definitions for a
new Keystone sub-architecture in ARM.

The TCI66xxK2H Communications Infrastructure Keystone SoCs
are member of the C66x family based on TI's new KeyStone 2
multi-core SoC Architecture designed specifically for high
performance wireless and networking infrastructure applications.
The SOCs contains many subsystems like Cortex A15 ARM CorePacs,
C66XX DSP CorePacs, MSMC memory controller, Tera Net bus,
IP Network, Navigator, Hyperlink, 1G/10G Ethernet, Radio layers
and queue based communication systems.

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: arm@kernel.org

Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>