#
66ba9c05 |
|
17-Jul-2023 |
Rob Herring <robh@kernel.org> |
ARM: imx: Drop unused includes Several includes are not needed, so drop them. of_platform.h (for now) implicitly includes platform_device.h and of.h, so add explicit includes of those as needed. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
#
fcaf2036 |
|
27-May-2019 |
Thomas Gleixner <tglx@linutronix.de> |
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 159 Based on 1 normalized pattern(s): the code contained herein is licensed under the gnu general public license you may obtain a copy of the gnu general public license version 2 or later at the following locations http www opensource org licenses gpl license html http www gnu org copyleft gpl html extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 161 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.383790741@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
#
26b754f9 |
|
10-Jul-2018 |
Fabio Estevam <fabio.estevam@nxp.com> |
ARM: mx5: Set the DBGEN bit in ARM_GPC register On i.MX51/i.MX53 it is necessary to set the DBGEN bit in ARM_GPC register in order to turn on the debug clocks. The DBGEN bit of ARM_GPC register has the following description in the i.MX53 Reference Manual: "This allows the user to manually activate clocks within the debug system. This register bit directly controls the platform's dbgen_out output signal which connects to the DAP_SYS to enable all debug clocks. Once enabled, the clocks cannot be disabled except by asserting the disable_trace input of the DAP_SYS." Based on a previous patch from Sebastian Reichel. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
#
850bea23 |
|
01-Jun-2016 |
Kefeng Wang <wangkefeng.wang@huawei.com> |
arm: Remove unnecessary of_platform_populate with default match table After patch "of/platform: Add common method to populate default bus", it is possible for arch code to remove unnecessary callers of of_platform_populate with default match table. Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Ray Jui <rjui@broadcom.com> Cc: Lee Jones <lee@kernel.org> Cc: Krzysztof Halasa <khalasa@piap.pl> Cc: Kukjin Kim <kgene@kernel.org> Cc: Rob Herring <robh@kernel.org> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Santosh Shilimkar <ssantosh@kernel.org> Cc: Roland Stigge <stigge@antcom.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Viresh Kumar <vireshk@kernel.org> Cc: Shiraz Hashim <shiraz.linux.kernel@gmail.com> Cc: Tony Prisk <linux@prisktech.co.nz> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Rob Herring <robh@kernel.org>
|
#
ead81266 |
|
01-Jun-2016 |
Alexander Shiyan <shc_work@mail.ru> |
ARM: imx: Use IRQCHIP_DECLARE for TZIC Remove boilerplate code by using IRQCHIP_DECLARE macro. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
#
7ead83f6 |
|
22-Apr-2016 |
Viresh Kumar <viresh.kumar@linaro.org> |
cpufreq: imx: Use generic platdev driver The cpufreq-dt-platdev driver supports creation of cpufreq-dt platform device now, reuse that and remove similar code from platform code. Note that the complete routine imx27_dt_init() is removed as of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); has same effect as a NULL .init_machine machine callback pointer. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
#
9a31634d |
|
26-Sep-2014 |
Lucas Stach <l.stach@pengutronix.de> |
ARM: imx53: add cpufreq support Instanciate device for the generic cpufreq-dt driver. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
|
#
08ae9646 |
|
31-Oct-2014 |
Jingchang Lu <jingchang.lu@freescale.com> |
ARM: imx: clean up machine mxc_arch_reset_init_dt reset init System restart mechanism has been changed with the introduction of "kernel restart handler call chain support". The imx2 watchdog based restart handler has been moved to the driver, and these restart can be removed from the machine layer. This patch cleans up the device tree version machine reset init with mxc_arch_reset_init_dt and removes corresponding .restart handler, for the .init_machine that can be handled by system default after removing the mxc_arch_reset_init_dt, the .init_machine is also removed. Signed-off-by: Jingchang Lu <jingchang.lu@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
|
#
6befda9a |
|
07-Jul-2014 |
Steffen Trumtrar <s.trumtrar@pengutronix.de> |
ARM: i.MX53: globally disable supervisor protect Most peripherals on the i.MX53 have an Off-Platform Peripheral Access Control Register (OPACR) in which the access rights (together with the MPROT registers) can be declared. However, this does not seem to work for example for SSI1+SDMA, because the supervisor bit is not set for the SDMA unit. It does work for SSI2, the QSB for example uses SSI2 for its audio. But SSI2 only works because it does NOT have an OPACR. The right solution would be to fix the access rights for the SDMA, but the unit responsible for this is the Central Security Unit (CSU), which of course is NOT documented. So, until documentation for this is openly available, turn off the supervisor protection because it cripples the hardware. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
|
#
8756dd92 |
|
01-Jul-2014 |
Shawn Guo <shawn.guo@freescale.com> |
ARM: imx: mark .dt_compat as const Otherwise GCC will mark the .init.rodata section R/W, which causes a compile error once we add other real R/O data. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
|
#
48b5393b |
|
20-May-2014 |
Shawn Guo <shawn.guo@freescale.com> |
ARM: imx5: remove mx51.h and mx53.h Now all the macros in mx51.h and mx53.h are used nowhere, so remove them. Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
|
#
c745cae7 |
|
20-May-2014 |
Shawn Guo <shawn.guo@freescale.com> |
ARM: imx5: remove file mm-imx5.c The only code left in mm-imx5.c is to create static mapping. While all IMX platform code are moved to use dynamic mapping, the file can just be removed now. Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
|
#
ff4ab231 |
|
20-May-2014 |
Shawn Guo <shawn.guo@freescale.com> |
ARM: imx5: move init hooks into mach-imx5x.c These imx5 init_early[late] hooks are called only from mach-imx5x.c. Let's move them into mach-imx5x.c. While at it, replace the static mapping in imx51_ipu_mipi_setup() with dynamic mapping. Also this function and imx_src_init() do not necessarily to be called at .init_early hook, so move them into .init_machine. The mxc_iomux_v3_init() is dropped from imx51_init_early() in the moving, since it's only needed by non-DT boot. Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
|
#
fffa0512 |
|
19-May-2014 |
Shawn Guo <shawn.guo@freescale.com> |
ARM: imx5: tzic_init_irq() can directly be .init_irq hook After i.MX51 supports DT only, tzic_init_irq() can figure out the tzic_base on its own. Thus, it can directly be .init_irq hook, and mx51[53]_init_irq() can be saved. Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
|
#
000bf9ee |
|
11-May-2014 |
Alexander Shiyan <shc_work@mail.ru> |
ARM: i.MX: Setup IRQ handler from IRQ driver This patch moves IRQ handler setup to the its corresponded IRQ driver (AVIC, TZIC). Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
|
#
df79bc9c |
|
08-Dec-2013 |
Shawn Guo <shawn.guo@linaro.org> |
ARM: imx: use __initconst for const init definition 0-DAY kernel build testing backend reports the following. scripts/checkpatch.pl 0001-ARM-imx-add-support-code-for-IMX50-based-machines.patch # many are suggestions rather than must-fix ERROR: Use of const init definition must use __initconst #80: arch/arm/mach-imx/mach-imx50.c:26: +static const char *imx50_dt_board_compat[] __initdata = { While at it, fix the error globally for IMX platform. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Acked-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
|
#
4d9d18a5 |
|
27-Aug-2013 |
Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> |
ARM: imx: remove custom .init_time hook With arch/arm calling of_clk_init(NULL) from time_init(), we can now remove custom .init_time hooks. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Shawn Guo <shawn.guo@linaro.org>
|
#
59d5c0ce |
|
21-Apr-2013 |
Shawn Guo <shawn.guo@linaro.org> |
ARM: imx: move imx53-qsb audio codec clk lookup into DT With device tree clk lookup support in place, we can move audio codec clk lookup for ssi_ext1 into device tree now, so that imx53_qsb_init() can be saved. Since ssi_ext2 lookup is used nowhere, it gets removed together with ssi_ext1 lookup from clk driver. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
|
#
c1e31d12 |
|
09-May-2013 |
Shawn Guo <shawn.guo@linaro.org> |
ARM: imx: create mxc_arch_reset_init_dt() for DT boot The mxc_arch_reset_init() uses static mapping and calls clk_get_sys() to get clock. It's suitable for non-DT boot but not for DT boot where dynamic mapping and of_clk_get() should be used instead. Create mxc_arch_reset_init_dt() as the DT variant of mxc_arch_reset_init(), and change DT platforms to use it. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
|
#
18cb680f |
|
09-May-2013 |
Shawn Guo <shawn.guo@linaro.org> |
ARM: imx: move clk_prepare() out from mxc_restart() It's inappropriate to call clk_prepare() in mxc_restart(), because the restart routine could be called in atomic context. Move clk_get() and clk_prepare() into mxc_arch_reset_init() and only have the atomic part clk_enable() be called in mxc_restart(). As a result, mxc_arch_reset_init() needs to be called after clk gets initialized. While there, it also changes printk(KERN_ERR ...) to pr_err() and adds __init annotation for mxc_arch_reset_init(). Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
|
#
6bb27d73 |
|
08-Nov-2012 |
Stephen Warren <swarren@nvidia.com> |
ARM: delete struct sys_timer Now that the only field in struct sys_timer is .init, delete the struct, and replace the machine descriptor .timer field with the initialization function itself. This will enable moving timer drivers into drivers/clocksource without having to place a public prototype of each struct sys_timer object into include/linux; the intent is to create a single of_clocksource_init() function that determines which timer driver to initialize by scanning the device dtree, much like the proposed irqchip_init() at: http://www.spinics.net/lists/arm-kernel/msg203686.html Includes mach-omap2 fixes from Igor Grinberg. Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Stephen Warren <swarren@nvidia.com>
|
#
f40f38d1 |
|
21-Nov-2012 |
Fabio Estevam <fabio.estevam@freescale.com> |
ARM: mx5: Replace clk_register_clkdev with clock DT lookup Similarly as it was done for mx6q, use a DT lookup in order to make maintainance task for the clock devices easier. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
#
50f2de61 |
|
14-Sep-2012 |
Shawn Guo <shawn.guo@linaro.org> |
ARM: imx: include hardware.h rather than mach/hardware.h It moves a bunch of header files included in hardware.h and itself from mach-imx/include/mach to mach-imx, and updates users to include hardware.h rather than mach/hardware.h. The files in mach-imx/devices will need to include "../hardware.h". Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de>
|
#
5bdfba29 |
|
14-Sep-2012 |
Shawn Guo <shawn.guo@linaro.org> |
i2c: imx: remove cpu_is_xxx by using platform_device_id This is some amount of work left/forgot from device tree conversion. Instead of checking cpu_is_xxx to determine the controller type, the driver should use platform_device_id, which should match the device tree compatible string. The patch changes the driver to use platform_device_id rather than cpu_is_xxx to determine the controller type/version. It also updates the platform code and device tree source accordingly. As the result, mach/hardware.h inclusion gets removed from the driver. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: Wolfram Sang <w.sang@pengutronix.de> Cc: linux-i2c@vger.kernel.org
|
#
e3372474 |
|
13-Sep-2012 |
Shawn Guo <shawn.guo@linaro.org> |
ARM: imx: include common.h rather than mach/common.h Rename mach-imx/include/mach/common.h to mach-imx/common.h and update all users to include common.h rather than mach/common.h. It also removes an unneeded inclusion to common.h in mach-imx/devices/devices.c. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de>
|
#
442279da |
|
12-Aug-2012 |
Shawn Guo <shawn.guo@linaro.org> |
ARM: imx53: support device tree boot only With device tree kernel provides the equal support as those imx53 board files, it's time to remove the board files and get imx53 support device tree only. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
|