ARM: davinci: remove include/mach/ subdirectory

The files in include/mach are only used from mach/davinci,
so they are no longer needed in the traditional location.

Move them to arch/arm/mach-davinci/ and drop the logic for
the special include path.

The mach/uncompress.h file is not used at all and can just
be removed.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

ARM: davinci: Replace HTTP links with HTTPS ones

Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.

Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.

Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
[nsekhar@ti.com: drop obsolete hawkboard.org URL completeley
fixup subject line prefix]
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500

Based on 2 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation #

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-only

has been chosen to replace the boilerplate/reference in 4122 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: davinci: da8xx-dt: switch to device tree clocks

This removes all of the clock init code from da8xx-dt.c. This includes
all of the OF_DEV_AUXDATA that was just used for looking up clocks.

Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

ARM: davinci: da850: Remove legacy clock init

This removes the unused legacy clock init code from
arch/arm/mach-davinci/da850.c.

Signed-off-by: David Lechner <david@lechnology.com>
Reviewed-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

ARM: davinci: da8xx: add new USB PHY clock init using common clock framework

This adds the new USB PHY clock init in mach-davinci/usb-da8xx.c using
the new common clock framework drivers.

The #ifdefs are needed to prevent compile errors until the entire
ARCH_DAVINCI is converted.

Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

ARM: davinci: da850: add new clock init using common clock framework

This adds the new board-specific clock init in mach-davinci/da850.c
using the new common clock framework drivers.

The #ifdefs are needed to prevent compile errors until the entire
ARCH_DAVINCI is converted.

Also clean up the #includes since we are adding some here.

Some CFGCHIP macros were removed because we are now including
linux/mfd/da8xx-cfgchip.h which defines the same values.

Reviewed-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

ARM: davinci: move davinci_clk_init() to init_time

This moves the call of davinci_clk_init() from map_io to init_time for all
boards.

This is the proper place to init clocks. This is also done in preparation
for moving to the common clock framework.

dm646x is a special case because we need to handle different ref_clk rates
depending on which board is being used. The clock init in this case is
modified to set the rate before registering the clocks instead of using
davinci_set_refclk_rate() to recalculate the entire clock tree after all
of the clocks are registered.

Also, the cpu_clks field is removed from struct davinci_soc_info since it
is no longer needed.

Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

ARM: davinci: remove watchdog reset

This removes the watchdog reset code. The reset has been moved to
drivers/watchdog/davinci_wdt.c. The watchdog driver registers the reset
with the kernel so defining a reset for each machine is no longer needed.

Signed-off-by: David Lechner <david@lechnology.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

ARM: davinci: da8xx-dt: Add OF_DEV_AUXDATA entry for DSP clock matching

Add the OF_DEV_AUXDATA entry needed to match the device-tree DSP node
to its non-device-tree clock, so that the da8xx-remoteproc driver can
properly enable the clocks. The device name has also been assigned
"davinci-rproc.0" to match the device id used in the da850_clks
clk_lookup array.

Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

ARM: davinci: da8xx: add OF_DEV_AUXDATA() for vpif

This is needed for the driver to access the vpif clock.

Signed-off-by: Kevin Hilman <khilman@baylibre.com>
[Bartosz: split the pdata-quirks patch in two with one
adding the OF_DEV_AUXDATA entry]
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

ARM: davinci: da850: model the SATA refclk

Register a fixed rate clock modelling the external SATA oscillator
for da850 (both DT and board file mode).

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

ARM: davinci: da8xx-dt: add OF_DEV_AUXDATA entry for SATA

This entry is needed for the ahci driver to get a functional clock.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
[nsekhar@ti.com: subject line adjustment]
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

ARM: davinci: add skeleton for pdata-quirks

Add skeleton pdata-quirks for davinci.

Signed-off-by: Kevin Hilman <khilman@baylibre.com>
[nsekhar@ti.com: move changes to build pdata-quirks.c and call
to pdata_quirks_init() to this patch]
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

ARM: da850: add the nand dev_id to the clock lookup table

The aemif driver can now access struct of_dev_auxdata (using platform
data).

Add the device id to the clock lookup table for the nand clock and
create a separate lookup table for aemif subnodes.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: davinci: da8xx: Fix ohci device name

While the clk lookup table is making reference to "ohci"
other subsystems (such as phy) are trying to match "ohci.0"

Since there is a single ohci instance, instead of changing
the clk name, change the dev id to -1, and add the "-da8xx"
postfix to match the driver name that will also be changed
in a subsequent patch.

Signed-off-by: Axel Haslam <ahaslam@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

ARM: davinci: PM: support da8xx DT platforms

Add PM support for DA850 device-tree boot.

Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

ARM: davinci: da850: Fix pwm name matching

This fixes pwm name matching for DA850 familiy devices. When using device
tree, the da850_auxdata_lookup[] table caused pwm devices to have the exact
same name, which caused errors when trying to register the devices.

We cannot have multiple entries for the same clock in in da850_clks[], so
we have added child clocks to the EHRPWM and ECAP LPSC clocks so that each
PWM device will have its own clock for proper name matching.

Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

ARM: davinci: da8xx: register USB PHY clocks in the DT file

The usb20_phy clock needs to be registered for the driver to be able
to get and enable a clock. Currently the usb phy clocks are registered
from board files, which will not be called during a device tree based
boot.

To be able to probe correctly usb form a device tree boot, register
the usb phy clocks from the DT specific init.

Unfortunately, davinci does not have proper clock support on device tree
yet, so by registering the clock from the DT specific file we are
forced to hardcode the parent clock, and cannot select refclkin as
parent for any of the phy clocks of the da850 family.

As none of the current da850 based boards currently in mainline use
refclkin as source. I guess we can live with this limitation until clocks
are correctly represented through CCF/device tree.

Signed-off-by: Axel Haslam <ahaslam@baylibre.com>
[Added error checking]
Signed-off-by: David Lechner <david@lechnology.com>
[nsekhar@ti.com: typo fixes in commit message]
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

ARM: davinci: da8xx-dt: add OF_DEV_AUXDATA entry for USB phy

Add OF_DEV_AUXDATA() entry for USB phy. This is required for
so that clock lookup will work for the USB PHY driver.

Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

ARM: davinci: da8xx: Add USB device names to clock lookup tables

This adds device names for the SoC USB devices to the clock lookup tables
in da830.c and da850.c.

Also add the USB device names to the da850_auxdata_lookup[] table.

Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

ARM: davinci: da8xx-dt: add OF_DEV_AUXDATA entry for lcdc

This is required for tilcdc to be able to acquire a functional clock
on da850 SoCs.

Signed-off-by: Karl Beldan <kbeldan@baylibre.com>
[Bartosz:
- added the commit description
- changed the compatible string to 'ti,da850-tilcdc']
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

ARM: davinci: da850: Add ti-aemif lookup for clock matching

The davinci boards don't have their clocks in DT yet and getting a clock
will fail, unless registering them as clk_lookups. This registers the
aemif clock for the ti-aemif memory driver.

The current aemif lookup entry resolving to the same clock:
'CLK(NULL, "aemif", &aemif_clk)'
is currently used by davinci_nand and remains for non-DT and backward
compatibility.

Currently the davinci boards only configure the AEMIF in case of non-DT
boot, via some code in mach-davinci.
This change will allow DT-based davinci platforms to do the same, via
the ti-aemif memory driver code.

Signed-off-by: Karl Beldan <kbeldan@baylibre.com>
[nsekhar@ti.com: reworded commit message]
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

ARM: dts: da850: Add basic DTS for the LCDK

The LCDK is the successor to the late Hawkboard.
Among the differences are the flash (16bits vs 8bits) and some pins
(MMC, LEDs, buttons, some external connectors), however the main
components remain the same (eth. phy, audio codec, video decoder and
DAC) except for the main PMIC, different and hard-wired on the LCDK (the
LDOs and DCDCs are always on).
A DT-only boot with this addition gives functional UART, reboot via
watchdog, RTC, ethernet and MMC (I added the CD GPIO for the MMC
although davinci_mmc doesn't call the OF facilities of mmc core).

Cc: Sekhar Nori <nsekhar@ti.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Karl Beldan <kbeldan@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

ARM: davinci: da8xx-dt: Add spi0 lookup for clock matching

Add AUXDATA needed to match the device-tree node for spi0 to the
non-device-tree clock.

Signed-off-by: David Lechner <david@lechnology.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
[nsekhar@ti.com: commit description updates]
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

ARM: davinci: use IRQCHIP_DECLARE for cp_intc

Remove boilerplate code by using IRQCHIP_DECLARE macro.

Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

ARM: davinci: remove unused DA8XX_NUM_UARTS

DA8X_NUM_UARTS not used in the code anywhere and should be determined
by DT anyway.

Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

ARM: davinci: simplify call to of populate

Take advantage of of_platoform_default_populate convience function.

Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

ARM: davinci: da8xx-dt: add OF_DEV_AUXDATA entry for i2c1

Add OF_DEV_AUXDATA entry for second i2c on the da850 DT board driver
to use i2c clock.

Signed-off-by: Petr Kulhavy <petr@barix.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

ARM: davinci: make headers more local

Some header files are never included outside of a mach-davinci
directory and do not need to be made visible in include/mach,
so let's just move them all down one level.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Sekhar Nori <nsekhar@ti.com>

ARM: appropriate __init annotation for const data

Init data marked const should be annotated with __initconst for
correctness and not __initdata. In some cases the array gathering
references to that data has to be marked const as well. This fixes
LTO builds that otherwise fail with section mismatch errors.

Signed-off-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

ARM: make of_device_ids const

of_device_ids (i.e. compatible strings and the respective data) are not
supposed to change at runtime. All functions working with of_device_ids
provided by <linux/of.h> work with const of_device_ids. So mark the
non-const structs in arch/arm as const, too.

While at it also add some __initconst annotations.

Acked-by: Jason Cooper <jason@lakedameon.net>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

ARM: davinci: da8xx-dt: add OF_DEV_AUXDATA entry for mcasp0

Add OF_DEV_AUXDATA for mcasp to be able to use clocks.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

watchdog: davinci: rename platform driver to davinci-wdt

As we switch to use the watchdog core which permits more than one
active watchdog in the system, rename platform driver to
"davinci-wdt" to be identifiable.

Acked-by: Wim Van Sebroeck <wim@iguana.be>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

ARM: davinci: da850: add OF_DEV_AUXDATA entry for davinci_emac

Add OF_DEV_AUXDATA for ethernet davinci_emac driver in da850 board dt
file to use emac clock.

Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

ARM: davinci: da850: add OF_DEV_AUXDATA entry for mdio.

Add OF_DEV_AUXDATA for mdio driver in da850 board dt
file to use mdio clock.

Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

ARM: davinci: da8xx: remove da8xx_uart_clk_enable

Serial clocks are enabled from of_platform_serial_setup:of_serial.c,
so remove davinci_serial_setup_clk from here.

Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

ARM: davinci: uart: move to devid based clk_get

For modules having single clock, clk_get should be done with dev_id.
But current davinci implementation handles multiple instances
of the UART devices with single platform_device_register. Hence clk_get
is based on con_id rather than dev_id, this is not correct. Do
platform_device_register for each instance and clk_get on dev_id.

Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com>
[nsekhar@ti.com: actually stop using con_id in clk_get(), squash the
patch adding OF aux data into this one]
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

ARM: davinci: da850: override SPI DT node device name

Populate OF_DEV_AUXDATA with desired device name expected by spi-davinci
driver. Without this clk_get of spi-davinci DT driver fails.

Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

ARM: davinci: da8xx dt: make file local symbols static

Make some file-local functions static. This fixes the sparse
warnings:

CHECK arch/arm/mach-davinci/da8xx-dt.c
arch/arm/mach-davinci/da8xx-dt.c:23:13: warning: symbol 'da8xx_uart_clk_enable' was not declared. Should it be static?
arch/arm/mach-davinci/da8xx-dt.c:40:23: warning: symbol 'da850_auxdata_lookup' was not declared. Should it be static?

Signed-off-by: Sekhar Nori <nsekhar@ti.com>

ARM: davinci: da850: add EHRPWM & ECAP DT node

Add da850 EHRPWM & ECAP DT node along with pin-mux details.
Also adds OF_DEV_AUXDATA for EHRPWM & ECAP driver to use EHRPWM & ECAP
clock.

Signed-off-by: Philip Avinash <avinashphilip@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

ARM: davinci: da850: override mmc DT node device name

Populate OF_DEV_AUXDATA with desired device name expected by
davinci_mmc driver. Without this clk_get of davinci_mmc DT driver
fails.

Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com>
Cc: linux-mmc@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: davinci-linux-open-source@linux.davincidsp.com
Cc: devicetree-discuss@lists.ozlabs.org
Cc: cjb@laptop.org
Cc: Sekhar Nori <nsekhar@ti.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

ARM: davinci: da850: add wdt DT node

Add da850 wdt DT node.
Add OF_DEV_AUXDATA for wdt driver to use wdt clock.

Signed-off-by: Kumar, Anil <anilkumar.v@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

ARM: davinci: da850: add DT node for I2C0

Add I2C0 device tree and pin muxing information to da850-evm.
Also, add OF_DEV_AUXDATA for I2C0 controller driver in da850
board dt file to use I2C0 clock.
Verified i2c0 node gets created in sys class interface as
"/sys/class/i2c-dev/i2c-0/subsystem/i2c-0".

nsekhar@ti.com: tested using i2cdetect and i2cdump.

Signed-off-by: Vishwanathrao Badarkhe, Manish <manishv.b@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

ARM: delete struct sys_timer

Now that the only field in struct sys_timer is .init, delete the struct,
and replace the machine descriptor .timer field with the initialization
function itself.

This will enable moving timer drivers into drivers/clocksource without
having to place a public prototype of each struct sys_timer object into
include/linux; the intent is to create a single of_clocksource_init()
function that determines which timer driver to initialize by scanning
the device dtree, much like the proposed irqchip_init() at:
http://www.spinics.net/lists/arm-kernel/msg203686.html

Includes mach-omap2 fixes from Igor Grinberg.

Tested-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Stephen Warren <swarren@nvidia.com>

ARM: davinci: add support for am1808 based EnBW CMC board

This board supports:

- AM1808 based board
- 64 MiB DDR ram
- 2 MiB Nor flash
- 128 MiB NAND flash
- use internal RTC
- I2C support
- hwmon lm75 support
- UBI/UBIFS support
- MMC support
- USB OTG support

This patch adds the basic DTS file enabling the serial ports.
Other features will be added in due course of time.

Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: devicetree-discuss@lists.ozlabs.org
Cc: davinci-linux-open-source@linux.davincidsp.com
Cc: Sekhar Nori <nsekhar@ti.com>
Cc: Kevin Hilman <khilman@ti.com>
Cc: Wolfgang Denk <wd@denx.de>
[nsekhar@ti.com: modified after dtsi refactoring and added binding
documentation]
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

ARM: davinci: da850 evm: add DT data

Add device tree data for DA850 EVM. At this time, only
information on serial ports is added.

Signed-off-by: Sekhar Nori <nsekhar@ti.com>

ARM: davinci: da850: add DT boot support

Add support for booting DA850 using flattened device
tree to describe the hardware. At this time only the
very basic bootup using a serial console is supported.

Signed-off-by: Sekhar Nori <nsekhar@ti.com>