ARM: defconfig: reorder config lines

As part of general housekeeping, change the defconfig files to
sort lines based on the 'make savedefconfig' output, to make
it easier to do additional changes on top.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

treewide: drop CONFIG_EMBEDDED

There is only one Kconfig user of CONFIG_EMBEDDED and it can be switched
to EXPERT or "if !ARCH_MULTIPLATFORM" (suggested by Arnd).

Link: https://lkml.kernel.org/r/20230816055010.31534-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com> [RISC-V]
Acked-by: Greg Ungerer <gerg@linux-m68k.org>
Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc]
Cc: Russell King <linux@armlinux.org.uk>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: Brian Cain <bcain@quicinc.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

ARM: reorder defconfig files

Some Kconfig options have moved around, so adapt the defconfig files
accordingly.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

ARM: qcom_defconfig: enable rest of ARMv7 SoCs pinctrl drivers

Enable rest of ARMv7 SoCs pin controller drivers.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220925112123.148897-1-krzysztof.kozlowski@linaro.org

nvmem: prefix all symbols with NVMEM_

This unifies all NVMEM symbols. They follow one style now.

Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220916122100.170016-8-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm: configs: Configs that had RPMSG_CHAR now get RPMSG_CTRL

In the commit 617d32938d1b ("rpmsg: Move the rpmsg control device
from rpmsg_char to rpmsg_ctrl"), we split the rpmsg_char driver in two.
By default give everyone who had the old driver enabled the rpmsg_ctrl
driver too.

Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

ARM: configs: replace CONFIG_NO_HZ=y with CONFIG_NO_HZ_IDLE=y

According to https://www.kernel.org/doc/html/latest/timers/no_hz.html,
CONFIG_NO_HZ=y should be replaced by CONFIG_NO_HZ_IDLE=y for newer
kernels, so let's reflect that in the 32-bit ARM defconfigs.

Signed-off-by: Stefan Hansson <newbie13xd@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> # Samsung
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220825162034.5901-1-newbie13xd@gmail.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

ARM: qcom_defconfig: enable more Qualcomm drivers

Enable Qualcomm drivers:
1. socinfo driver to provide some basic information about the
SoC being used.
2. Remote filesystem memory driver (used in MSM8974).
3. RPM Power domain (used in MSM8226).
4. Sleep stats driver (used in MSM8916, MSM8974 and APQ8084).

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220727065830.10681-2-krzysztof.kozlowski@linaro.org

ARM: defconfig: address renamed CONFIG_DEBUG_INFO=y

CONFIG_DEBUG_INFO is now implicitly selected if one picks one of the
explicit options that could be DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT,
DEBUG_INFO_DWARF4, DEBUG_INFO_DWARF5.

This was actually not what I had in mind when I suggested making
it a 'choice' statement, but it's too late to change again now,
and the Kconfig logic is more sensible in the new form.

Change any defconfig file that had CONFIG_DEBUG_INFO enabled
but did not pick DWARF4 or DWARF5 explicitly to now pick the toolchain
default.

Fixes: f9b3cd245784 ("Kconfig.debug: make DEBUG_INFO selectable from a choice")
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

ARM: refresh defconfig files

A lot of Kconfig options have changed over the years, and we tend
to not do a blind 'make defconfig' to refresh the files, to ensure
we catch options that should not have gone away.

I used some a bit of scripting to only rework the bits where an
option moved around in any of the defconfig files, without also
dropping any of the other lines, to make it clearer which options
we no longer have.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

ARM: qcom_defconfig: enable debug fs support

Enable CONFIG_DEBUG_FS since this is useful to have around.

Signed-off-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220311154919.1797920-3-bmasney@redhat.com

ARM: qcom_defconfig: enable options for Qualcomm random number generator

Enable the driver for the Qualcomm random number generator and the
userspace crypto API.

This was a tested on a Nexus 5 phone (msm8974 SoC).

Signed-off-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220311154919.1797920-2-bmasney@redhat.com

mm: remove cleancache

Patch series "remove Xen tmem leftovers".

Since the removal of the Xen tmem driver in 2019, the cleancache hooks
are entirely unused, as are large parts of frontswap. This series
against linux-next (with the folio changes included) removes
cleancaches, and cuts down frontswap to the bits actually used by zswap.

This patch (of 13):

The cleancache subsystem is unused since the removal of Xen tmem driver
in commit 814bbf49dcd0 ("xen: remove tmem driver").

[akpm@linux-foundation.org: remove now-unreachable code]

Link: https://lkml.kernel.org/r/20211224062246.1258487-1-hch@lst.de
Link: https://lkml.kernel.org/r/20211224062246.1258487-2-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Konrad Rzeszutek Wilk <Konrad.wilk@oracle.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ARM: configs: Everyone who had PANEL_SIMPLE now gets PANEL_EDP

In the patch ("drm/panel-simple-edp: Split eDP panels out of
panel-simple") we will split the PANEL_SIMPLE driver in two. By
default let's give everyone who had the old driver enabled the new
driver too. If folks want to opt-out of one or the other they always
can later.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210914132020.v5.5.I02250cd7d4799661b068bcc65849a456ed411734@changeid

ARM: configs: qcom_defconfig: Reduce CMA size to 64MB

Not all platforms are able to allocate CMA size of 256MB. One such
platform is SDX55. Hence, use the standard 64MB size for CMA.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210408170930.91834-8-manivannan.sadhasivam@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

ARM: configs: qcom_defconfig: Enable GLINK SMEM driver

Enable the Qualcomm GLINK SMEM driver to support GLINK protocol over
shared memory.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210408170930.91834-7-manivannan.sadhasivam@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

ARM: configs: qcom_defconfig: Enable SDX55 interconnect driver

Enable interconnect driver for SDX55 platform to manage the interconnect
providers.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210408170930.91834-6-manivannan.sadhasivam@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

ARM: configs: qcom_defconfig: Enable Q6V5_PAS remoteproc driver

Enable the Qualcomm Q6V5_PAS (Peripheral Authentication Service)
remoteproc driver to manage the modem co-processor in SDX55 platform.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210408170930.91834-5-manivannan.sadhasivam@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

ARM: configs: qcom_defconfig: Enable CPUFreq support

Enable CPUFreq and CPUFreq DT drivers to carry out CPU Frequency scaling
duties on platforms like SDX55.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210408170930.91834-4-manivannan.sadhasivam@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

ARM: configs: qcom_defconfig: Enable SDX55 A7 PLL and APCS clock driver

Enable A7 PLL driver and APCS clock driver on SDX55 platform.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210408170930.91834-3-manivannan.sadhasivam@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

ARM: configs: qcom_defconfig: Enable APCS IPC mailbox driver

Enable Qualcomm APCS IPC mailbox driver for IPC communication between
application processor and other masters in platforms like SDX55.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210408170930.91834-2-manivannan.sadhasivam@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arch: arm: Remove CONFIG_OPROFILE support

The "oprofile" user-space tools don't use the kernel OPROFILE support
any more, and haven't in a long time. User-space has been converted to
the perf interfaces.

Remove the old oprofile's architecture specific support.

Suggested-by: Christoph Hellwig <hch@infradead.org>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Robert Richter <rric@kernel.org>
Acked-by: William Cohen <wcohen@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Thomas Gleixner <tglx@linutronix.de>

ARM: qcom_defconfig: Enable Command DB driver

Enable Command DB driver to query the shared system resources on
platforms using RPMh such as SDX55.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210118053853.56224-14-manivannan.sadhasivam@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

ARM: qcom_defconfig: Enable RPMh power domain driver

Enable RPMh power domain driver to support power-domains on platforms
like SDX55.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210118053853.56224-13-manivannan.sadhasivam@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

ARM: qcom_defconfig: Enable ARM PSCI support

Enable ARM Power State Coordination Interface (PSCI) support on Qualcomm
platforms.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210118053853.56224-12-manivannan.sadhasivam@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

ARM: qcom_defconfig: Enable watchdog driver

Enable watchdog driver for Qualcomm platforms.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210118053853.56224-11-manivannan.sadhasivam@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

ARM: qcom_defconfig: Enable RPMh regulator

Enable RPMh regulator for using with platforms like SDX55.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210118053853.56224-10-manivannan.sadhasivam@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

ARM: qcom_defconfig: Enable ARM SMMU

Enable ARM SMMU driver for using with platforms like SDX55.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210118053853.56224-9-manivannan.sadhasivam@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

ARM: qcom_defconfig: Enable DWC3 controller and PHYs

Enable DWC3 controller, QMP PHY and SNPS HS PHY for using with platforms
like SDX55.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210118053853.56224-8-manivannan.sadhasivam@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

ARM: qcom_defconfig: Enable UBI file system

Enable UBI file system support.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210118053853.56224-7-manivannan.sadhasivam@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

ARM: qcom_defconfig: Enable MTD UBI driver

Enable MTD UBI driver for using partitions on top of NAND flash in
platforms like SDX55.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210118053853.56224-6-manivannan.sadhasivam@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

ARM: qcom_defconfig: Enable SMEM partition parser

Enable Qcom SMEM partition parser driver to make use of the NAND
partitions defined in Shared Memory (SMEM).

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210118053853.56224-5-manivannan.sadhasivam@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

ARM: qcom_defconfig: Enable SDX55 GCC driver

Enable Qcom SDX55 GCC driver for clock support.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210118053853.56224-4-manivannan.sadhasivam@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

ARM: qcom_defconfig: Enable SDX55 pinctrl driver

Enable the Qcom SDX55 pinctrl driver and also enable the PINCTRL_MSM
driver explicitly since it is not selected by default directly.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210118053853.56224-3-manivannan.sadhasivam@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

ARM: qcom_defconfig: Enable RPMh drivers

Enable Qcom RPMh drivers for using it in platforms like SDX55.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210118053853.56224-2-manivannan.sadhasivam@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

ARM: configs: drop unused BACKLIGHT_GENERIC option

Commit 7ecdea4a0226 ("backlight: generic_bl: Remove this driver as it is
unused") removed geenric_bl driver from the tree, together with
corresponding config option.

Remove BACKLIGHT_GENERIC config item from all ARM configurations.

Fixes: 7ecdea4a0226 ("backlight: generic_bl: Remove this driver as it is unused")
Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://lore.kernel.org/r/20201201222922.3183-2-andrey.zhizhikin@leica-geosystems.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

ARM: qcom_defconfig: Enable QRTR

This option is useful on msm8974, so enable it.

Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Link: https://lore.kernel.org/r/20200214183111.50919-1-luca@z3ntu.xyz
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

ARM: qcom_defconfig: add Broadcom bluetooth options

Add Broadcom bluetooth options and serial bus in order to support
Bluetooth on the Nexus 5 phone.

Signed-off-by: Brian Masney <masneyb@onstation.org>
Link: https://lore.kernel.org/r/20200129232031.34538-2-masneyb@onstation.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

ARM: qcom_defconfig: add anx78xx HDMI bridge support

Add the Analogix anx78xx driver so that the external display over HDMI
can be used on Nexus 5 phones.

Reviewed-by: Georgi Djakov <georgi.djakov@linaro.org>
Signed-off-by: Brian Masney <masneyb@onstation.org>
Link: https://lore.kernel.org/r/20191024103140.10077-3-masneyb@onstation.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

ARM: qcom_defconfig: add msm8974 interconnect support

Add interconnect support for msm8974-based SoCs in order to support the
GPU on this platform.

Reviewed-by: Georgi Djakov <georgi.djakov@linaro.org>
Signed-off-by: Brian Masney <masneyb@onstation.org>
Link: https://lore.kernel.org/r/20191024103140.10077-2-masneyb@onstation.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

sysctl: Remove the sysctl system call

This system call has been deprecated almost since it was introduced, and
in a survey of the linux distributions I can no longer find any of them
that enable CONFIG_SYSCTL_SYSCALL. The only indication that I can find
that anyone might care is that a few of the defconfigs in the kernel
enable CONFIG_SYSCTL_SYSCALL. However this appears in only 31 of 414
defconfigs in the kernel, so I suspect this symbols presence is simply
because it is harmless to include rather than because it is necessary.

As there appear to be no users of the sysctl system call, remove the
code. As this removes one of the few uses of the internal kernel mount
of proc I hope this allows for even more simplifications of the proc
filesystem.

Cc: Alex Smith <alex.smith@imgtec.com>
Cc: Anders Berg <anders.berg@lsi.com>
Cc: Apelete Seketeli <apelete@seketeli.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Chee Nouk Phoon <cnphoon@altera.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Christian Ruppert <christian.ruppert@abilis.com>
Cc: Greg Ungerer <gerg@uclinux.org>
Cc: Harvey Hunt <harvey.hunt@imgtec.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Hongliang Tao <taohl@lemote.com>
Cc: Hua Yan <yanh@lemote.com>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: John Crispin <blogic@openwrt.org>
Cc: Jonas Jensen <jonas.jensen@gmail.com>
Cc: Josh Boyer <jwboyer@gmail.com>
Cc: Jun Nie <jun.nie@linaro.org>
Cc: Kevin Hilman <khilman@linaro.org>
Cc: Kevin Wells <kevin.wells@nxp.com>
Cc: Kumar Gala <galak@codeaurora.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Noam Camus <noamc@ezchip.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Phil Edworthy <phil.edworthy@renesas.com>
Cc: Pierrick Hascoet <pierrick.hascoet@abilis.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Roland Stigge <stigge@antcom.de>
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: Scott Telford <stelford@cadence.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: Tanmay Inamdar <tinamdar@apm.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>

ARM: qcom_defconfig: add ocmem support

Add ocmem driver that's needed for some a3xx and a4xx based systems.

Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

ARM: qcom_defconfig: Add DRM_MSM to defconfigs with ARCH_QCOM

Now that CONFIG_DRM_MSM is no longer default 'y' add it as a module to all
ARCH_QCOM enabled defconfigs to restore the previous expected build
behavior.

Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

ARM: config: Remove left-over BACKLIGHT_LCD_SUPPORT

The CONFIG_BACKLIGHT_LCD_SUPPORT was removed in commit 8c5dc8d9f19c
("video: backlight: Remove useless BACKLIGHT_LCD_SUPPORT kernel
symbol"). Options protected by CONFIG_BACKLIGHT_LCD_SUPPORT are now
available directly.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

ARM: qcom_defconfig: add support for USB networking

Add support for USB networking as a module to qcom_defconfig since its
a useful feature to have for development purposes.

Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

ARM: qcom_defconfig: add display-related options

Add the CMA (Contiguous Memory Allocator) for the MSM DRM/KMS driver,
the simple panel, and the TI LM3630A driver in order to support the
display on the LG Nexus 5 (hammerhead) phone.

Signed-off-by: Brian Masney <masneyb@onstation.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

mtd: rawnand: Clarify Kconfig entry MTD_NAND

MTD_NAND is large and encloses much more than what the symbol is
actually used for: raw NAND. Clarify the symbol by naming it
MTD_RAW_NAND instead.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

ARM: qcom_defconfig: add options for LG Nexus 5 phone

Add wcn36xx wireless, msm vibrator, pm8941 power key, bq24190 charger,
spmi-iadc, spmi-vadc, mpu6515 gyroscope / accelerometer, and tsl2772
proximity / light drivers as modules to support the LG Nexus 5
(hammerhead) phone.

CFG80211 is changed to be a module to match MAC80211 since this isn't
required for initial bootup.

Device manager support is also added as a module since this is needed by
postmarketOS.

Signed-off-by: Brian Masney <masneyb@onstation.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Gross <agross@kernel.org>

ARM: qcom_defconfig: Enable MAILBOX

Problem:
ab460a2e72da ("rpmsg: qcom_smd: Access APCS through mailbox framework"
added a "depends on MAILBOX") to RPMSG_QCOM_SMD, thus RPMSG_QCOM_SMD
becomes unset since MAILBOX was not enabled in qcom_defconfig and is
not otherwise selected for the dragonboard. When the resulting
kernel is booted the mmc device which contains the root file system
is not available.

Fix:
add CONFIG_MAILBOX to qcom_defconfig

Fixes: ab460a2e72da ("rpmsg: qcom_smd: Access APCS through mailbox framework"
added a "depends on MAILBOX")

Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

ARM: qcom_defconfig: Enable QCOM NAND related configs

IPQ8064 and IPQ4019 boards contain NAND flash
memory for which these configs need to be enabled.

Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

ARM: qcom_defconfig: Enable Frambuffer console support

This patch adds framebuffer console support to qcom defconfig.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

ARM: qcom_defconfig: enable MSM IOMMU for display

MSM IOMMU is required for apq8064 display, so enable it by default.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

ARM: qcom_defconfig: Enable DRM for 8064 display

This enables DRM Kconfig for apq8064 display.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

ARM: qcom_defconfig: Enable Z2 Tablet related options

Select the options necessary to get USB, coincell, WiFI, touchscreen and
backlight on the Z2 Tablet (and other family B devices) working. The
device specific peripherals are selected as modules.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

ARM: qcom_defconfig: Disable DEBUG_GPIO

GPIO debug spams the kernel log quite a bit, so remove this from the
default Qualcomm defconfig.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

ARM: qcom_defconfig: Enable configs for USB on apq8064/msm8974

Enable the regulator driver, usb phy drivers, and hsic hub driver
to support USB devices on apq8064 and msm8974.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

ARM: qcom_defconfig: Resync with new Kconfig options

CONFIG_HWSPINLOCK must be selected explicitly for SMEM and its
dependencies to be enabled.

The update is generated by "make savedefconfig" and as such reflects
changes to the implicit state of other options, as of v4.14-rc1.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

ARM: qcom_defconfig: Cleanup from non-existing options

QCOM_SMD is gone since commit 395a48053af6 ("soc: qcom: smd: Remove
standalone driver").

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

ARM: qcom_defconfig: enable RPMSG_QCOM_SMD

As of commit 5052de8deff56, QCOM_SMD_RPM and various other config
options enabled in the qcom_defconfig depends on the RPMSG. If
QCOM_SMD_RPM config option is not selected it disables the
REGULATOR_QCOM_SMD_RPM and other essential config options.

Signed-off-by: Bhushan Shah <bshah@kde.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

ARM: defconfig: Cleanup from old Kconfig options

Remove old, dead Kconfig options (in order appearing in this commit):
- EXPERIMENTAL is gone since v3.9;
- INET_LRO: commit 7bbf3cae65b6 ("ipv4: Remove inet_lro library");
- MTD_CONCAT: commit f53fdebcc3e1 ("mtd: drop MTD_CONCAT from Kconfig entirely");
- MTD_PARTITIONS: commit 6a8a98b22b10 ("mtd: kill CONFIG_MTD_PARTITIONS");
- MTD_CHAR: commit 660685d9d1b4 ("mtd: merge mtdchar module with mtdcore");
- NETDEV_1000 and NETDEV_10000: commit f860b0522f65 ("drivers/net:
Kconfig and Makefile cleanup"); NET_ETHERNET should be replaced with
just ETHERNET but that is separate change;
- INOTIFY: commit 2dfc1cae4c42 ("inotify: remove inotify in kernel interface");
- MISC_DEVICES: commit 7c5763b8453a ("drivers: misc: Remove
MISC_DEVICES config option");
- HID_SUPPORT: commit 1f41a6a99476 ("HID: Fix the generic Kconfig options");
- BT_L2CAP and BT_SCO: commit f1e91e1640d8 ("Bluetooth: Always compile
SCO and L2CAP in Bluetooth Core");
- DEBUG_ERRORS: commit b025a3f836d1 ("ARM: 6876/1: Kconfig.debug:
Remove unused CONFIG_DEBUG_ERRORS");
- USB_DEVICE_CLASS: commit 007bab91324e ("USB: remove CONFIG_USB_DEVICE_CLASS");
- RCU_CPU_STALL_DETECTOR: commit a00e0d714fbd ("rcu: Remove conditional
compilation for RCU CPU stall warnings");
- SYSCTL_SYSCALL_CHECK: commit 7c60c48f58a7 ("sysctl: Improve the
sysctl sanity checks");
- IP_NF_QUEUE: commit 3dd6664fac7e ("netfilter: remove unused "config IP_NF_QUEUE"");
- IP_NF_TARGET_ULOG: commit d4da843e6fad ("netfilter: kill remnants of ulog targets");
- IP6_NF_QUEUE: commit d16cf20e2f2f ("netfilter: remove ip_queue support");
- IP6_NF_TARGET_LOG: commit 6939c33a757b ("netfilter: merge ipt_LOG and
ip6_LOG into xt_LOG");
- USB_LED: commit a335aaf3125c ("usb: misc: remove outdated USB LED driver");
- MMC_UNSAFE_RESUME: commit 2501c9179dff ("mmc: core: Use
MMC_UNSAFE_RESUME as default behavior");
- AUTOFS_FS: commit 561c5cf9236a ("staging: Remove autofs3");
- DISPLAY_SUPPORT: commit 5a6b5e02d673 ("fbdev: remove display subsystem");
- CFG80211_REG_DEBUG: commit c799ba6eab7a ("cfg80211: remove
CFG80211_REG_DEBUG");
- VIDEO_OUTPUT_CONTROL: commit f167a64e9d67 ("video / output: Drop
display output class support");
- USB_LIBUSUAL: commit f61870ee6f8c ("usb: remove libusual");
- CRYPTO_ZLIB: commit 110492183c4b ("crypto: compress - remove unused
pcomp interface");
- BLK_DEV_UB: commit 68a5059ecf82 ("block: remove the deprecated ub driver");

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
[for vexpress]
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>

ARM: qcom_defconfig: Enable IPQ4019 clock and pinctrl

These configs are required for booting kernel in QCOM IPQ4019 boards.

Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

ARM: qcom_defconfig: Enable Qualcomm remoteproc and related drivers

An adsp-pil node is present in at least the MSM8974 SoC. Simply enable
all Qualcomm remoteproc drivers to avoid more work in the future.

The SMP2P driver is required for adsp-pil to initialize correctly.

Enable the SMSM driver at Bjorn Andersson's request: "We also need
CONFIG_QCOM_SMSM=y here, its currently used to signal state of the ring
buffers for WiFi."

CONFIG_QCOM_WCNSS_CTRL is required to load firmware/configuration data
into the WCNSS core, which handles WiFi and Bluetooth.

Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

ARM: defconfig: qcom: add APQ8060 DragonBoard devices

This default-enables the devices found on the APQ8060 DragonBoard
in the qcom_defconfig:

- EBI2 bus
- SMSC911x ethernet
- LEDs class and PM8058 LEDs driver, trigger and heartbeat
trigger (so we get heartbeat on the board by default)
- IIO framework, including the HRTimer trigger, KXSD9
accelerometer, MPU3050 gyroscope, AK8975 magnetometer and
BMP085 pressure sensor

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

ARM: qcom_defconfig: enable thermal sensors

This patch enables thermal sensors and QFPROM support for qcom platforms.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

ARM: qcom_defconfig: add ahci configs

This patch enables configs required to get SATA functionality working on
IFC6410 board.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

ARM: qcom_defconfig: add pcie and atl1c ethernet configs

IFC6410 board has PCIE based ATL1C ethernet controller, so enable related configs.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

ARM: qcom_defconfig: add usb related configs

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

ARM: qcom_defconfig: Enable RPM/RPM-SMD clocks

Enable support for clocks, controlled by the RPM processor on
Qualcomm platforms.

Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

mfd: qcom-pm8xxx: Clean up PM8XXX namespace

The Kconfig and file naming for the PM8xxx driver is totally
confusing:

- Kconfig options MFD_PM8XXX and MFD_PM8921_CORE, some in-kernel
users depending on or selecting either at random.
- A driver file named pm8921-core.c even if it is indeed
used by the whole PM8xxx family of chips.
- An irqchip named pm8xxx since it was (I guess) realized that
the driver was generic for all pm8xxx PMICs.

As I may want to add support for PM8901 this is starting to get
really messy. Fix this situation by:

- Remove the MFD_PM8921_CORE symbol and rely solely on MFD_PM8XXX
and convert all users, including LEDs Kconfig and ARM defconfigs
for qcom and multi_v7 to use that single symbol.
- Renaming the driver to qcom-pm8xxx.c to fit along the two
other qcom* prefixed drivers.
- Rename functions withing the driver from 8921 to 8xxx to
indicate it is generic.
- Just drop the =m config from the pxa_defconfig, I have no clue
why it is even there, it is not a Qualcomm platform. (Possibly
older Kconfig noise from saveconfig.)

Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Gross <andy.gross@linaro.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

ARM: qcom_defconfig: Fix MDM9515 LCC and GCC config

Correct prefix is MDM instead of MSM.

Fixes: 8aa788d3e59a ("ARM: configs: qualcomm: Add MDM9615 missing defconfigs")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

ARM: configs: qualcomm: Add MDM9615 missing defconfigs

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

ARM: defconfig: enable the MSM8660 pin controller

After enabling this I get pins, GPIO, keys and everything on
the MSM8660 surf (APQ8660 DragonBoard).

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

ARM: defconfig: qcom: Enable SSBI drivers

Enable some ssbi drivers present on msm8660, msm8960 and apq8064
devices so that we fully exercise the devices present in the dts
files.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

ARM: defconfig: Update qcom_defconfig

This enables smem, smd, rpm, regulators, pmic pinctrl and hwspinlock as
these platform features are now merged. It enables gpio-keys as this is
used by most boards and enables fhandle and cgroups, so we can boot
systemd.

Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

ARM: qcom_defconfig: Enable HAVE_ARM_ARCH_TIMER

Enable this config in the defconfig so that we can delete the
selection logic surrounding it that exists in mach-qcom/Kconfig.

Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Andy Gross <agross@codeaurora.org>

ARM: qcom_defconfig: Enable SMD-RPM regulators

This patch enables all of the options required to support SMD RPM based
regulators.

Signed-off-by: Andy Gross <agross@codeaurora.org>

ARM: qcom_defconfig: Enable options for KS8851 ethernet

Enable the RPM and RPM regulator drivers as well as the KS8851
ethernet driver so that ethernet works on MSM8960 CDP.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Andy Gross <agross@codeaurora.org>

ARM: config: Update qcom_defconfig to enable cpuidle

Update qcom_defconfig to allow cpuidle for QCOM cpus.

* Enable QCOM_PM
* Enable ARM_CPUIDLE

Cc: Kumar Gala <galak@codeaurora.org>
Signed-off-by: Lina Iyer <lina.iyer@linaro.org>
Signed-off-by: Kumar Gala <galak@codeaurora.org>

ARM: qcom: Increase MMC_BLOCK_MINORS in defconfig

There are currently more than 16 partitions on the eMMC of all recent
Qualcomm devices. Increase the number of minors per block device to
detect all available partitions.

Signed-off-by: Georgi Djakov <gdjakov@mm-sol.com>
Signed-off-by: Kumar Gala <galak@codeaurora.org>

arm: qcom: Update defconfig

After removing ARCH_REQUIRE_GPIOLIB we need to select
CONFIG_GPIOLIB to keep building the pinctrl drivers. Make the
defconfig smaller too by running savedefconfig.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Kumar Gala <galak@codeaurora.org>

arm: qcom: Enable lpass clock driver in defconfig

Enable the LPASS clock controller driver so that audio drivers
can enable, disable, and set rates on their clocks.

Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Kumar Gala <galak@codeaurora.org>
[sboyd@codeaurora.org: Enable 8960 driver too]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Kumar Gala <galak@codeaurora.org>

ARM: qcom: Update defconfig

* Enable APQ8084 pinctrl

Signed-off-by: Kumar Gala <galak@codeaurora.org>

ARM: qcom: Update defconfig

* General defconfig update to match upstream changes
* Enable IPQ806x & APQ8084 clk support
* Enable pinctrl on MSM8960
* Enable CPU_IDLE to get basic wfi support
* Enable SPI NOR and MTD M25P80 support (used on AP148 board)
* Enable SATA PHY support on IPQ806x and APQ8064
* Enable Fixed regulator and ARM MMCI support (mmc support on APQ8064)

Signed-off-by: Kumar Gala <galak@codeaurora.org>

ARM: qcom: Enable GSBI driver in defconfig

Signed-off-by: Kumar Gala <galak@codeaurora.org>

ARM: config: Add qcom_defconfig

Add a defconfig for mach-qcom platforms (copied from msm_defconfig).
Although these platforms are part of the multi-platform kernel, it's
useful to have a stripped down version of the defconfig that just
selects the DT based Qualcomm platforms and drivers.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Kumar Gala <galak@codeaurora.org>