arc: Replace lkml.org links with lore

As started by commit 05a5f51ca566 ("Documentation: Replace lkml.org
links with lore"), replace lkml.org links with lore to better use a
single source that's more likely to stay available long-term.

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Vineet Gupta <vineetg@rivosinc.com>

ARC: [plat-hsdk] Remap CCMs super early in asm boot trampoline

ARC HSDK platform stopped booting on released v5.10-rc1, getting stuck
in startup of non master SMP cores.

This was bisected to upstream commit 7fef431be9c9ac25
"(mm/page_alloc: place pages to tail in __free_pages_core())"
That commit itself is harmless, it just exposed a subtle assumption in
our platform code (hence CC'ing linux-mm just as FYI in case some other
arches / platforms trip on it).

The upstream commit is semantically disruptive as it reverses the order
of page allocations (actually it can be good test for hardware
verification to exercise different memory patterns altogether).
For ARC HSDK platform that meant a remapped memory region (pertaining to
unused Closely Coupled Memory) started getting used early for dynamice
allocations, while not effectively remapped on all the cores, triggering
memory error exception on those cores.

The fix is to move the CCM remapping from early platform code to to early core
boot code. And while it is undesirable to riddle common boot code with
platform quirks, there is no other way to do this since the faltering code
involves setting up stack itself so even function calls are not allowed at
that point.

If anyone is interested, all the gory details can be found at Link below.

Link: https://github.com/foss-for-synopsys-dwc-arc-processors/linux/issues/32
Cc: David Hildenbrand <david@redhat.com>
Cc: linux-mm@kvack.org
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>

treewide: Convert macro and uses of __section(foo) to __section("foo")

Use a more generic form for __section that requires quotes to avoid
complications with clang and gcc differences.

Remove the quote operator # from compiler_attributes.h __section macro.

Convert all unquoted __section(foo) uses to quoted __section("foo").
Also convert __attribute__((section("foo"))) uses to __section("foo")
even if the __attribute__ has multiple list entry forms.

Conversion done using the script at:

https://lore.kernel.org/lkml/75393e5ddc272dc7403de74d645e6c6e0f4e70eb.camel@perches.com/2-convert_section.pl

Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@gooogle.com>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ARC: [plat-hsdk]: allow to switch between AXI DMAC port configurations

We want to use DW AXI DMAC on HSDK board in our automated verification
to test cache & dma kernel code changes. This is perfect candidate
as we don't depend on any external peripherals like MMC card / USB
storage / etc.
To increase test coverage we want to test both options:
* DW AXI DMAC is connected through IOC port & dma direct ops used
* DW AXI DMAC is connected to DDR port & dma noncoherent ops used

Introduce 'arc_hsdk_axi_dmac_coherent' global variable which can be
modified by debugger (same way as we patch 'ioc_enable') to switch
between these options without recompiling the kernel.
Depend on this value we tweak memory bridge configuration and
"dma-coherent" DTS property of DW AXI DMAC.

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500

Based on 2 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation #

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-only

has been chosen to replace the boilerplate/reference in 4122 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARC: [plat-hsdk]: unify memory apertures configuration

HSDK SoC has memory bridge which allows to configure memory map
for different AXI masters in runtime.
As of today we adjust memory apertures configuration in U-boot
so we have different configuration in case of loading kernel
via U-boot and JTAG.

It isn't really critical in case of existing platform configuration
as configuration differs for <currently> unused address space
regions or unused AXI masters. However we may face with this
issue when we'll bringup new peripherals or touch their address
space.

Fix that by perform full configuration of memory bridge in HSDK
platform code. Basically we simply copy memory bridge configuration
code from U-boot.

Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>

ARC: [plat-hsdk]: Configure APB GPIO controller on ARC HSDK platform

In case of HSDK we have intermediate INTC in for of DW APB GPIO controller
which is used as a de-bounce logic for interrupt wires that come from
outside the board.

We cannot use existing "irq-dw-apb-ictl" driver here because all input
lines are routed to corresponding output lines but not muxed into one
line (this is configured in RTL and we cannot change this in software).

But even if we add such a feature to "irq-dw-apb-ictl" driver that won't
benefit us as higher-level INTC (in case of HSDK it is IDU) anyways has
per-input control so adding fully-controller intermediate INTC will only
bring some overhead on interrupt processing but no other benefits.

Thus we just do one-time configuration of DW APB GPIO controller and
forget about it.

Based on implementation available on arch/arc/plat-axs10x/axs10x.c file.

Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>

ARC: [plat-hsdk]: Get rid of core pll frequency set in platform code

Get rid of core pll frequency set in platform code as we set it via
device tree using 'assigned-clock-rates' property.

Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>

ARC: [plat-hsdk] Increase SDIO CIU frequency to 50000000Hz

With current SDIO CIU clock frequency (12500000Hz) DW MMC
controller fails to initialize some SD cards (which don't
support slow mode).

So increase SDIO CIU frequency from 12500000Hz to 50000000Hz by
switching from the default divisor value (div-by-8) to the
minimum possible value of the divisor (div-by-2) in HSDK platform
code.

Reported-by: Vineet Gupta <vgupta@synopsys.com>
Tested-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>

ARC: [plat-hsdk]: Temporary fix to set CPU frequency to 1GHz

Add temporary fix to HSDK platform code to setup CPU frequency
to 1GHz on early boot.
We can remove this fix when smart hsdk pll driver will be
introduced, see discussion:
https://www.mail-archive.com/linux-snps-arc@lists.infradead.org/msg02689.html

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>

ARC: [plat-hsdk] initial port for HSDK board

This initial port adds support of ARC HS Development Kit board with some
basic features such serial port, USB, SD/MMC and Ethernet.

Essentially we run Linux kernel on all 4 cores (i.e. utilize SMP) and
heavily use IO Coherency for speeding-up DMA-aware peripherals.

Note as opposed to other ARC boards we link Linux kernel to
0x9000_0000 intentionally because cores 1 and 3 configured with DCCM
situated at our more usual link base 0x8000_0000. We still can use
memory region starting at 0x8000_0000 as we reallocate DCCM in our
platform code.

Note that PAE remapping for DMA clients does not work due to an RTL bug,
so CREG_PAE register must be programmed to all zeroes, otherwise it will
cause problems with DMA to/from peripherals even if PAE40 is not used.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>