ARC: build: use $(READELF) instead of hard-coded readelf

The top Makefile defines READELF as the readelf in the cross-toolchains.
Use it rather than the host readelf.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>

ARC: build: remove unneeded extra-y

Adding vmlinux.* to extra-y has no point because we expect they are
built on demand while building uImage.*

Add them to 'targets' is enough to include the corresponding .cmd file.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>

ARC: build: move symlink creation to arch/arc/Makefile to avoid race

If you run 'make uImage uImage.gz' with the parallel option, uImage.gz
will be created by two threads simultaneously.

This is because arch/arc/Makefile does not specify the dependency
between uImage and uImage.gz. Hence, GNU Make assumes they can be
built in parallel. One thread descends into arch/arc/boot/ to create
uImage, and another to create uImage.gz.

Please notice the same log is displayed twice in the following steps:

$ export CROSS_COMPILE=<your-arc-compiler-prefix>
$ make -s ARCH=arc defconfig
$ make -j$(nproc) ARCH=arc uImage uImage.gz
[ snip ]
LD vmlinux
SORTTAB vmlinux
SYSMAP System.map
OBJCOPY arch/arc/boot/vmlinux.bin
OBJCOPY arch/arc/boot/vmlinux.bin
GZIP arch/arc/boot/vmlinux.bin.gz
GZIP arch/arc/boot/vmlinux.bin.gz
UIMAGE arch/arc/boot/uImage.gz
UIMAGE arch/arc/boot/uImage.gz
Image Name: Linux-5.10.0-rc4-00003-g62f23044
Created: Sun Nov 22 02:52:26 2020
Image Type: ARC Linux Kernel Image (gzip compressed)
Data Size: 2109376 Bytes = 2059.94 KiB = 2.01 MiB
Load Address: 80000000
Entry Point: 80004000
Image arch/arc/boot/uImage is ready
Image Name: Linux-5.10.0-rc4-00003-g62f23044
Created: Sun Nov 22 02:52:26 2020
Image Type: ARC Linux Kernel Image (gzip compressed)
Data Size: 2815455 Bytes = 2749.47 KiB = 2.69 MiB
Load Address: 80000000
Entry Point: 80004000

This is a race between the two threads trying to write to the same file
arch/arc/boot/uImage.gz. This is a potential problem that can generate
a broken file.

I fixed a similar problem for ARM by commit 3939f3345050 ("ARM: 8418/1:
add boot image dependencies to not generate invalid images").

I highly recommend to avoid such build rules that cause a race condition.

Move the uImage rule to arch/arc/Makefile.

Another strangeness is that arch/arc/boot/Makefile compares the
timestamps between $(obj)/uImage and $(obj)/uImage.*:

$(obj)/uImage: $(obj)/uImage.$(suffix-y)
@ln -sf $(notdir $<) $@
@echo ' Image $@ is ready'

This does not work as expected since $(obj)/uImage is a symlink.
The symlink should be created in a phony target rule.

I used $(kecho) instead of echo to suppress the message
'Image arch/arc/boot/uImage is ready' when the -s option is given.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.

For non */uapi/* files that summary was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139

and resulted in the first patch in this series.

If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930

and resulted in the second patch in this series.

- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:

SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1

and that resulted in the third patch in this series.

- when the two scanners agreed on the detected license(s), that became
the concluded license(s).

- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.

- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).

- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.

- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct

This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARC: [build] Support gz, lzma compressed uImage

Add support for lzma compressed uImage.

Support for gzip was already available but could not be enabled because
we were missing CONFIG_HAVE_KERNEL_GZIP in arch/arc/Kconfig.

Signed-off-by: Daniel Mentz <danielmentz@google.com>
Cc: linux-snps-arc@lists.infradead.org
Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>

ARC: [build] Allow uncompressed uImage

The existing uImage target always generates gzip compressed image which
drags bootup for some very slow FPGA customer boards.

So introduce seperate make targets:uImage.{bin,gz} with uncompressed
being default. Also tie gz generation to CONFIG_KERNEL_GZIP, which a
platform can select in it's Kconfig if it wishes gz to be default.

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>

ARC: [build] cleanup Makefile a bit

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>

ARC: Build system: Makefiles, Kconfig, Linker script

Arnd in his review pointed out that arch Kconfig organisation has several
deficiencies:

* Build time entries for things which can be runtime extracted from DT
(e.g. SDRAM size, core clk frequency..)
* Not multi-platform-image-build friendly (choice .. endchoice constructs)
* cpu variants support (750/770) is exclusive.

The first 2 have been fixed in subsequent patches.
Due to the nature of the 750 and 770, it is not possible to build for
both together, w/o special runtime glue code which would hurt
performance.

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>