dt-bindings: Fix typos

Fix typos in Documentation/devicetree/bindings. The changes are in
descriptions or comments where they shouldn't affect functionality.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20230814212822.193684-3-helgaas@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: usb: dwc3-imx8mp: add power domain property

The USB controllers in the i.MX8MP are located inside the HSIO
power domain. Add the power-domains property to the DT binding
to be able to describe the hardware properly.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230110180804.594462-1-l.stach@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dt-bindings: usb: dwc3-imx8mp: Add imx8mp specific flags

This adds bindings for features in the USB glue block. They allow
setting polarity of PWR and OC as well as disabling port power control.
Also permanently attached can be annotated as well.
Additional IO address and clock are needed.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/20220218152707.2198357-3-alexander.stein@ew.tq-group.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dt-bindings: usb: dwc3-imx8mp: Use the correct name for child node "snps, dwc3"

File snps,dwc3.yaml describes the schema of Synopsys DesignWare USB3
Controller, it directly or indirectly contains "$ref: usb.yaml". So the
node name of "snps,dwc3" must start with "usb". Otherwise, the following
warning will be displayed:

Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.example.dt.yaml: \
dwc3@38100000: $nodename:0: 'dwc3@38100000' does not match '^usb(@.*)?'
From schema: Documentation/devicetree/bindings/usb/snps,dwc3.yaml

In addition, replace "type: object" with "$ref: snps,dwc3.yaml#". Ensure
that all properties of the child node comply with snps,dwc3.yaml.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20210329072714.2135-2-thunder.leizhen@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dt-bindings: usb: dwc3-imx8mp: add imx8mp dwc3 glue bindings

NXP imx8mp integrates 2 dwc3 3.30b IP and add some wakeup logic
to support low power mode, the glue layer is for this wakeup
functionality, which has a separated interrupt, can support
wakeup from U3 and connect events for host, and vbus wakeup for
device.

Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Li Jun <jun.li@nxp.com>
Link: https://lore.kernel.org/r/1609241866-9508-2-git-send-email-jun.li@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>