dt-bindings: soc: qcom: Drop unneeded quotes

Cleanup bindings dropping unneeded quotes. Once all these are fixed,
checking for this can be enabled in yamllint.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230327170205.4106310-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: soc: qcom,apr: correct qcom,intents type

The qcom,intents property is a list of pairs, thus it should be defined
as uint32-matrix.

Fixes: b2d7616e13c4 ("dt-bindings: soc: qcom: apr: add missing properties")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230208101545.45711-5-krzysztof.kozlowski@linaro.org

dt-bindings: drop redundant part of title (end, part three)

The Devicetree bindings document does not have to say in the title that
it is a "binding", but instead just describe the hardware.

Drop trailing "bindings" in various forms (also with trailing full
stop):

find Documentation/devicetree/bindings/ -type f -name '*.yaml' \
-not -name 'trivial-devices.yaml' \
-exec sed -i -e 's/^title: \(.*\) [bB]indings\?\.\?$/title: \1/' {} \;

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Matti Vaittinen <mazziesaccount@gmail.com> # ROHM
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # MMC
Acked-by: Stephen Boyd <sboyd@kernel.org> # clk
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> # input
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # media
Acked-by: Sebastian Reichel <sre@kernel.org> # power
Acked-by: Viresh Kumar <viresh.kumar@linaro.org> # cpufreq
Link: https://lore.kernel.org/r/20221216163815.522628-7-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: soc: qcom: apr: document generic qcom,apr compatible

Document the qcom,apr compatible, used by Qualcomm Asynchronous Packet
Router driver. There are no upstream DTSes using this compatible -
instead we have ones with APRv2 (qcom,apr-v2). The driver does not make
distinction between both compatibles, which raises the question whether
the compatible is really needed. Document it (as compatible with v2)
for completeness.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221201133637.46146-1-krzysztof.kozlowski@linaro.org

ASoC: dt-bindings: qcom,apr: Correct and extend example

Correct the APR/GPR example:
1. Use consistent 4-space indentation,
2. Add required properties to services nodes, so the binding check
passes once schema for these services is improved,
3. Add few other properties as APR/GPR is part of a GLINK edge:
qcom,glink-channels and qcom,intents.
4. Drop unnecessary services, to make the example compact.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221115120235.167812-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: dt-bindings: qcom,apr: Split services to shared schema

The APR/GPR nodes are organized like:

apr-or-gpr-device-node <- qcom,apr.yaml
apr-gpr-service@[0-9] <- qcom,apr.yaml
service-specific-components <- /schemas/sound/qcom,q6*.yaml

The schema for services (apr-gpr-service@[0-9]) already grows
considerably and is still quite not specific. It allows several
incorrect combinations, like adding a clock-controller to a APM device.
Restricting it would complicate the schema even more. Bringing new
support for sound on Qualcomm SM8450 and SC8280XP SoC would grow it as
well.

Simplify the qcom,apr.yaml by splitting the services to a shared file
which will be:
1. Referenced by qcom,apr.yaml with additionalProperties:true,
2. Referenced by specific bindings for services with
additionalProperties:false (not yet in this commit).

While moving the code, add also required 'reg' and
'qcom,protection-domain' to further constrain the bindings.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221115120235.167812-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: dt-bindings: qcom,apr: Add GLINK channel name for SM8450

On SM8450 and SC8280XP with Qualcomm GPR, the GLINK channel name
(qcom,glink-channels) for ADSP is "adsp_apps".

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221115120235.167812-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>

dt-bindings: soc: qcom: apr: add missing properties

The APR bindings were not describing all properties already used in DTS:
1. Add qcom,glink-channels, qcom,smd-channels and qcom,intents (widely
used).
2. Add power-domains for MSM8996.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220910091428.50418-16-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: dt-bindings: qcom,q6adm: convert to dtschema

Convert Qualcomm Audio Device Manager (Q6ADM) bindings to DT schema.

The original bindings documented:
1. APR service node with compatibles: "qcom,q6adm" and
"qcom,q6adm-v<MAJOR-NUMBER>.<MINOR-NUMBER>",
2. Routing child node with compatible "qcom,q6adm-routing".

The conversion entirely drops (1) because the compatible is already
documented in bindings/soc/qcom/qcom,apr.yaml. The
"qcom,q6adm-v<MAJOR-NUMBER>.<MINOR-NUMBER>" on the other hand is not
used at all - neither in existing DTS, nor in downstream sources - so
versions seems to be fully auto-detectable.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220910091428.50418-12-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: dt-bindings: qcom,q6asm: convert to dtschema

Convert Qualcomm Audio Stream Manager (Q6ASM) bindings to DT schema.

The original bindings documented:
1. APR service node with compatibles: "qcom,q6asm" and
"qcom,q6asm-v<MAJOR-NUMBER>.<MINOR-NUMBER>",
2. actual DAIs child node with compatible "qcom,q6asm-dais".

The conversion entirely drops (1) because the compatible is already
documented in bindings/soc/qcom/qcom,apr.yaml. The
"qcom,q6asm-v<MAJOR-NUMBER>.<MINOR-NUMBER>" on the other hand is not
used at all - neither in existing DTS, nor in downstream sources - so
versions seems to be fully auto-detectable.

Another change done in conversion is adding "iommus" property, which is
already used in DTS and Linux driver.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220910091428.50418-11-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>

dt-bindings: soc: qcom: apr: correct service children

The APR bindings were not describing properly children nodes for DAIs.
None of the DTSes use unit addresses for the children, so correct the
nodes and reference their schema: clock-controller, dais and routing.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220910091428.50418-10-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>

soc: dt-bindings: qcom: add gpr bindings

Qualcomm Generic Packet router aka GPR is the IPC mechanism found
in AudioReach next generation signal processing framework to perform
command and response messages between various processors.

GPR has concepts of static and dynamic port, all static services like
APM (Audio Processing Manager), PRM (Proxy resource manager) have
fixed port numbers where as dynamic services like graphs have dynamic
port numbers which are allocated at runtime. All GPR packet messages
will have source and destination domain and port along with opcode
and payload.

This support is added using existing APR driver to reuse most of
the code.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210927135559.738-5-srinivas.kandagatla@linaro.org

soc: dt-bindings: qcom: apr: deprecate qcom,apr-domain property

replace usage of qcom,apr-domain property with qcom,domain property so
that bindings and driver can be reused.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210927135559.738-3-srinivas.kandagatla@linaro.org

soc: dt-bindings: qcom: apr: convert to yaml

Convert APR bindings to yaml format so that we could add new bindings support.

All the dsp services bindings are now part of apr bindings instead
of adding them to audio bindings.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210927135559.738-2-srinivas.kandagatla@linaro.org