dt-bindings: opp: opp-v2-kryo-cpu: Document named opp-microvolt property

Document named opp-microvolt property for opp-v2-kryo-cpu schema.
This property is used to declare multiple voltage ranges selected on the
different values read from efuses. The selection is done based on the
speed pvs values and the named opp-microvolt property is selected by the
qcom-cpufreq-nvmem driver.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

dt-bindings: opp: opp-v2-kryo-cpu: support Qualcomm Krait SoCs

Exted the opp-v2-kryo-cpu.yaml to support defining OPP tables for the
previous generation of Qualcomm CPUs, 32-bit Krait-based platforms.

It makes no sense to use 'operating-points-v2-kryo-cpu' compatibility
node for the Krait cores. Add support for the Krait-specific
'operating-points-v2-krait-cpu' compatibility string and the relevant
opp-microvolt subclasses properties.

The listed opp-supported-hw values are applicable only to msm8996 /
msm8996pro platforms. Remove the enum as other platforms will use other
bit values. It makes little sense to list all possible values for all
the platforms here.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

dt-bindings: opp: opp-v2-kryo-cpu: Allow opp-peak-kBps

Many of the users of operating-points-v2-kryo-cpu scales interconnect
bandwidth based on the selected opp. Extend the binding to allow the
opp-peak-kBps property, inherited from opp-v2-base.yaml, to be used to
specify the requested bandwidth.

Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

dt-bindings: opp: opp-v2-kryo-cpu: enlarge opp-supported-hw maximum

Enlarge opp-supported-hw maximum value. In recent SoC we started
matching more bit and we currently match mask of 112. The old maximum of
7 was good for old SoC that didn't had complex id, but now this is
limiting and we need to enlarge it to support more variants.

Document all the various mask that can be used and limit them to only
reasonable values instead of using a generic maximum limit.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

dt-bindings: opp: opp-v2-kryo-cpu: Add missing 'cache-unified' property in example

The examples' cache nodes are incomplete as 'cache-unified' is a
required cache property for unified caches which an L2 cache certainly
is.

Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

dt-bindings: drop redundant part of title (end, part three)

The Devicetree bindings document does not have to say in the title that
it is a "binding", but instead just describe the hardware.

Drop trailing "bindings" in various forms (also with trailing full
stop):

find Documentation/devicetree/bindings/ -type f -name '*.yaml' \
-not -name 'trivial-devices.yaml' \
-exec sed -i -e 's/^title: \(.*\) [bB]indings\?\.\?$/title: \1/' {} \;

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Matti Vaittinen <mazziesaccount@gmail.com> # ROHM
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # MMC
Acked-by: Stephen Boyd <sboyd@kernel.org> # clk
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> # input
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # media
Acked-by: Sebastian Reichel <sre@kernel.org> # power
Acked-by: Viresh Kumar <viresh.kumar@linaro.org> # cpufreq
Link: https://lore.kernel.org/r/20221216163815.522628-7-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: opp: Add missing (unevaluated|additional)Properties on child nodes

In order to ensure only documented properties are present, node schemas
must have unevaluatedProperties or additionalProperties set to false
(typically).

Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

dt-bindings: opp: opp-v2-kryo-cpu: Fix example binding checks

Adding missing compat entries to the cpufreq node
Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml shows up
a dt_binding_check in this file.

opp-v2-kryo-cpu.example.dtb: /: cpus:cpu@0: 'power-domains' is a required property
opp-v2-kryo-cpu.example.dtb: /: cpus:cpu@0: 'power-domain-names' is a required property
opp-v2-kryo-cpu.example.dtb: /: opp-table-0:opp-307200000: 'required-opps' is a required property

Fixes: ec24d1d55469 ("dt-bindings: opp: Convert qcom-nvmem-cpufreq to DT schema")
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

dt-bindings: opp: opp-v2-kryo-cpu: Remove SMEM

qcom-cpufreq-nvmem no longer uses SMEM. Remove all references
to SMEM and change the description and maximum value of
opp-supported-hw to reflect the new set of possible values.

Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

dt-bindings: opp: Convert qcom-nvmem-cpufreq to DT schema

Convert qcom-nvmem-cpufreq to DT schema format, splitting it into
an OPP schema and a CPUFreq schema in the process.

Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>