#
ab040c42 |
|
16-Dec-2022 |
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> |
dt-bindings: drop redundant part of title of shared bindings The Devicetree bindings document does not have to say in the title that it is a "binding", but instead just describe the hardware. For shared (re-usable) schemas, name them all as "common properties". Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Guenter Roeck <linux@roeck-us.net> # watchdog Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # IIO Acked-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # MMC Acked-by: Stephen Boyd <sboyd@kernel.org> # clk Acked-by: Vinod Koul <vkoul@kernel.org> # dma Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # media Acked-by: Sebastian Reichel <sre@kernel.org> # power Acked-by: Viresh Kumar <viresh.kumar@linaro.org> # opp Link: https://lore.kernel.org/r/20221216163815.522628-2-krzysztof.kozlowski@linaro.org Signed-off-by: Rob Herring <robh@kernel.org>
|
#
785576c9 |
|
11-Jan-2022 |
Rob Herring <robh@kernel.org> |
dt-bindings: net: mdio: Drop resets/reset-names child properties resets/reset-names are device specific and don't belong in the MDIO bus schema. For example, it doesn't match what is defined for the "qca,ar9331-switch" binding which defines "reset-names" to be "switch" rather than "phy". Neither name is that useful IMO. Other child properties are also device specific, but those won't conflict with device schemas. Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220111170248.3160841-1-robh@kernel.org
|
#
ad31ce56 |
|
06-Dec-2021 |
Rob Herring <robh@kernel.org> |
dt-bindings: net: mdio: Allow any child node name An MDIO bus can have devices other than ethernet PHYs on it, so it should allow for any node name rather than just 'ethernet-phy'. Cc: Andrew Lunn <andrew@lunn.ch> Cc: Heiner Kallweit <hkallweit1@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: netdev@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Thierry Reding <treding@nvidia.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20211206174139.2296497-1-robh@kernel.org
|
#
d69c6ddd |
|
17-Dec-2020 |
Rob Herring <robh@kernel.org> |
dt-bindings: Fix JSON pointers The correct syntax for JSON pointers begins with a '/' after the '#'. Without a '/', the string should be interpreted as a subschema identifier. The jsonschema module currently doesn't handle subschema identifiers and incorrectly allows JSON pointers to begin without a '/'. Let's fix this before it becomes a problem when jsonschema module is fixed. Converted with: perl -p -i -e 's/yaml#definitions/yaml#\/definitions/g' `find Documentation/devicetree/bindings/ -name "*.yaml"` Cc: Maxime Ripard <mripard@kernel.org> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Daniel Thompson <daniel.thompson@linaro.org> Cc: Jingoo Han <jingoohan1@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Mark Brown <broonie@kernel.org> Cc: netdev@vger.kernel.org Acked-By: Vinod Koul <vkoul@kernel.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Sebastian Reichel <sre@kernel.org> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/r/20201217223429.354283-1-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
|
#
6a0e321e |
|
05-Oct-2020 |
Rob Herring <robh@kernel.org> |
dt-bindings: Explicitly allow additional properties in common schemas In order to add meta-schema checks for additional/unevaluatedProperties being present, all schema need to make this explicit. As common/shared schema are included by other schemas, they should always allow for additionalProperties. Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Sebastian Reichel <sre@kernel.org> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-By: Vinod Koul <vkoul@kernel.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20201005183830.486085-5-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
|
#
c44a1b91 |
|
30-Jul-2020 |
Bruno Thomsen <bruno.thomsen@gmail.com> |
dt-bindings: net: mdio: add reset-post-delay-us property Add "reset-post-delay-us" parameter to MDIO bus properties, so it's possible to add a delay after reset deassert. This is optional in case external hardware slows down release of the reset signal. Signed-off-by: Bruno Thomsen <bruno.thomsen@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
630c3ff8 |
|
20-Apr-2020 |
Florian Fainelli <f.fainelli@gmail.com> |
dt-bindings: net: mdio: Make descriptions more general A number of descriptions assume a PHY device, but since this binding describes a MDIO bus which can have different kinds of MDIO devices attached to it, rephrase some descriptions to be more general in that regard. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
b92d905f |
|
20-Apr-2020 |
Florian Fainelli <f.fainelli@gmail.com> |
dt-bindings: net: mdio: Document common properties Some of the properties pertaining to the broken turn around or resets were only documented in ethernet-phy.yaml while they are applicable across all MDIO devices and not Ethernet PHYs specifically which are a superset. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
3c01eb62 |
|
19-Apr-2020 |
Andrew Lunn <andrew@lunn.ch> |
net: ethernet: fec: Allow the MDIO preamble to be disabled An MDIO transaction normally starts with 32 1s as a preamble. However not all devices requires such a preamble. Add a device tree property which allows the preamble to be suppressed. This will half the size of the MDIO transaction, allowing faster transactions. But it should only be used when all devices on the bus support suppressed preamble. Suggested-by: Chris Healy <Chris.Healy@zii.aero> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
3e782985 |
|
19-Apr-2020 |
Andrew Lunn <andrew@lunn.ch> |
net: ethernet: fec: Allow configuration of MDIO bus speed MDIO busses typically operate at 2.5MHz. However many devices can operate at faster speeds. This then allows more MDIO transactions per second, useful for Ethernet switch statistics, or Ethernet PHY TDR data. Allow the bus speed to be configured, using the standard "clock-frequency" property, which i2c busses use to indicate the bus speed. Before using this property, ensure all devices on the bus do actually support the requested clock speed. Suggested-by: Chris Healy <Chris.Healy@zii.aero> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
867c1859 |
|
14-Feb-2020 |
Grygorii Strashko <grygorii.strashko@ti.com> |
dt-bindings: net: mdio: remove compatible string from example Remove vendor specific compatible string from example, otherwise DT YAML schemas validation may trigger warnings specific to TI ti,davinci_mdio and not to the generic MDIO example. For example, the "bus_freq" is required for davinci_mdio, but not required for generic mdio example. As result following warning will be produced: mdio.example.dt.yaml: mdio@5c030000: 'bus_freq' is a required property Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Rob Herring <robh@kernel.org>
|
#
5b19b6c3 |
|
03-Jul-2019 |
Maxime Ripard <mripard@kernel.org> |
dt-bindings: net: mdio: Add child nodes The child nodes of a mdio bus are supposed to be ethernet PHYs, with a reg property. Make sure that's validated as well. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Rob Herring <robh@kernel.org>
|
#
960ebc8a |
|
03-Jul-2019 |
Maxime Ripard <mripard@kernel.org> |
dt-bindings: net: mdio: Add address and size cells MDIO controllers should have child nodes with a singe value in their reg properties being the ID of the PHY in the bus. Let's add the proper constraints on #address-cells and #size-cells. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Rob Herring <robh@kernel.org>
|
#
4c2c04c2 |
|
03-Jul-2019 |
Maxime Ripard <mripard@kernel.org> |
dt-bindings: net: mdio: Add a nodename pattern The node name of an MDIO controller should be MDIO. Let's add a rule for this. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Rob Herring <robh@kernel.org>
|
#
62d77ff7 |
|
27-Jun-2019 |
Maxime Ripard <mripard@kernel.org> |
dt-bindings: net: Add a YAML schemas for the generic MDIO options The MDIO buses have a number of available device tree properties that can be used in their device tree node. Add a YAML schemas for those. Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org>
|