dt-bindings: Cleanup standard unit properties

Properties with standard unit suffixes already have a type and don't need
type definitions. They also default to a single entry, so 'maxItems: 1'
can be dropped.

adi,ad5758 is an oddball which defined an enum of arrays. While a valid
schema, it is simpler as a whole to only define scalar constraints.

Cc: Jean Delvare <jdelvare@suse.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Serge Semin <fancer.lancer@gmail.com>
Cc: linux-hwmon@vger.kernel.org
Cc: linux-i2c@vger.kernel.org
Cc: linux-iio@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-input@vger.kernel.org
Cc: linux-mmc@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Cc: linux-rtc@vger.kernel.org
Cc: linux-serial@vger.kernel.org
Cc: alsa-devel@alsa-project.org
Cc: linux-watchdog@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Sebastian Reichel <sre@kernel.org> # for power-supply
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for-iio
Acked-by: Alexandre TORGUE <alexandre.torgue@foss.st.com>
Link: https://lore.kernel.org/r/20210128194515.743252-1-robh@kernel.org

dt-bindings: i2c: dw: cancel mandatory requirements for "#address-cells" and "#size-cells"

The "#address-cells" and "#size-cells" are required only when the I2C
controller has subnodes. However, some I2C controllers defined in
"arch/arm64/boot/dts/amd/" and "arch/arm64/boot/dts/hisilicon/"
directories do not have child nodes. So they don't need these two
properties and don't write them explicitly.

Therefore, setting properties "#address-cells" and "#size-cells" as
"required" in this yaml file causes the following warnings:
/root/linux-next/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dt.yaml: \
i2c@f7100000: '#address-cells' is a required property
/root/linux-next/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dt.yaml: \
i2c@f7100000: '#size-cells' is a required property

Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20201214124347.2120-2-thunder.leizhen@huawei.com
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: i2c: dw: Add Baikal-T1 SoC I2C controller

Add the "baikal,bt1-sys-i2c" compatible string to the DW I2C binding. Even
though the corresponding node is supposed to be a child of the Baikal-T1
System Controller, its reg property is left required for compatibility.

Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

dt-bindings: i2c: Convert DW I2C slave to the DW I2C master example

dtc currently doesn't support I2C_OWN_SLAVE_ADDRESS flag set in the
i2c "reg" property. If dtc finds an i2c-slave sub-node having an address
higher than ten-bits wide it'll print an ugly warning:

Warning (i2c_bus_reg): /example-2/i2c@1120000/eeprom@64: I2C bus unit address format error, expected "40000064"
Warning (i2c_bus_reg): /example-2/i2c@1120000/eeprom@64:reg: I2C address must be less than 10-bits, got "0x40000064"

In order to silence dtc up let's replace the corresponding DT binding
example with a normal DW I2C master mode-based one. It's done by clearing
the I2C_OWN_SLAVE_ADDRESS bit in the reg property and converting the
sub-node to be compatible with normal EEPROM like "atmel,24c02".

Just revert this commit when dtc is fixed.

Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

dt-bindings: i2c: Convert DW I2C binding to DT schema

Modern device tree bindings are supposed to be created as YAML-files
in accordance with dt-schema. This commit replaces Synopsys DW I2C
legacy bare text bindings with YAML file. As before the bindings file
states that the corresponding dts node is supposed to be compatible
either with generic DW I2C controller or with Microsemi Ocelot SoC I2C
one, to have registers, interrupts and clocks properties. In addition
the node may have clock-frequency, i2c-sda-hold-time-ns,
i2c-scl-falling-time-ns and i2c-sda-falling-time-ns optional properties.

Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>