#
b59dcca9 |
|
15-Feb-2024 |
Devarsh Thakkar <devarsht@ti.com> |
dt-bindings: display: ti,am65x-dss: Add support for common1 region TI keystone display subsystem present in AM65, AM62 and AM62A SoC support two separate register spaces namely "common" and "common1" which can be used by two separate hosts to program the display controller as described in respective Technical Reference Manuals [1]. The common1 register space has similar set of configuration registers as supported in common register space except the global configuration registers which are exclusive to common region. This adds binding for "common1" register region too as supported by the hardware. [1]: AM62x TRM: https://www.ti.com/lit/pdf/spruiv7 (Section 14.8.9.1 DSS Registers) AM65x TRM: https://www.ti.com/lit/pdf/spruid7 (Section 12.6.5 DSS Registers) AM62A TRM: https://www.ti.com/lit/pdf/spruj16 (Section 14.9.9 Display Subsystem Registers) Fixes: 2d8730f1021f ("dt-bindings: display: ti,am65x-dss: Add dt-schema yaml binding") Signed-off-by: Devarsh Thakkar <devarsht@ti.com> Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240216062426.4170528-2-devarsht@ti.com
|
#
7959ceb7 |
|
08-Nov-2023 |
Aradhya Bhatia <a-bhatia1@ti.com> |
dt-bindings: display: ti: Add support for am62a7 dss The DSS controller on TI's AM62A7 SoC is an update from that on TI's AM625 SoC. Like the DSS in AM625, the DSS in this SoC has 2 video pipelines, but unlike the former, the latter only has one output port on VP2 to service DPI display sinks. Add the new controller's compatible. Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://lore.kernel.org/r/20231108171619.978438-2-a-bhatia1@ti.com Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
|
#
13126d7f |
|
16-Jun-2023 |
Aradhya Bhatia <a-bhatia1@ti.com> |
dt-bindings: display: ti,am65x-dss: Add am625 dss compatible The DSS controller on TI's AM625 SoC is an update from that on TI's AM65X SoC. The former has an additional OLDI TX on its first video port that helps output cloned video or WUXGA (1920x1200@60fps) resolution video output over a dual-link mode to reduce the required OLDI clock output. The second video port is same from AM65x DSS and it outputs DPI video data. It can support 2K resolutions @ 60fps, independently. Add the new controller's compatible and update descriptions. Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230616150900.6617-2-a-bhatia1@ti.com
|
#
4334aec0 |
|
20-Mar-2023 |
Rob Herring <robh@kernel.org> |
dt-bindings: display: Drop unneeded quotes Cleanup bindings dropping unneeded quotes. Once all these are fixed, checking for this can be enabled in yamllint. Reviewed-by: Chun-Kuang Hu <chunkuang.hu@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Miguel Ojeda <ojeda@kernel.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> #display/msm Link: https://lore.kernel.org/r/20230320233823.2919475-1-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
|
#
39bd2b6a |
|
18-Jan-2022 |
Rob Herring <robh@kernel.org> |
dt-bindings: Improve phandle-array schemas The 'phandle-array' type is a bit ambiguous. It can be either just an array of phandles or an array of phandles plus args. Many schemas for phandle-array properties aren't clear in the schema which case applies though the description usually describes it. The array of phandles case boils down to needing: items: maxItems: 1 The phandle plus args cases should typically take this form: items: - items: - description: A phandle - description: 1st arg cell - description: 2nd arg cell With this change, some examples need updating so that the bracketing of property values matches the schema. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Vinod Koul <vkoul@kernel.org> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Georgi Djakov <djakov@kernel.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Link: https://lore.kernel.org/r/20220119015038.2433585-1-robh@kernel.org
|
#
b6755423 |
|
04-Jan-2021 |
Rob Herring <robh@kernel.org> |
dt-bindings: display: Use OF graph schema Now that we have a graph schema, rework the display related schemas to use it. Mostly this is adding a reference to graph.yaml and dropping duplicate parts from schemas. In panel-common.yaml, 'ports' is dropped. Any binding using 'ports' should be one with more than 1 port node, and the binding must define what each port is. Note that ti,sn65dsi86.yaml, ti,tfp410,yaml and toshiba,tc358768.yaml will need further updates to use video-interfaces.yaml once that lands. Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210104180724.2275098-1-robh@kernel.org
|
#
6468f234 |
|
16-Sep-2020 |
Tomi Valkeinen <tomi.valkeinen@ti.com> |
dt-bindings: display: ti,am65x-dss: add missing properties to dt-schema Add assigned-clocks, assigned-clock-parents and dma-coherent optional properties. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200916131009.221252-2-tomi.valkeinen@ti.com
|
#
fba56184 |
|
12-May-2020 |
Rob Herring <robh@kernel.org> |
dt-bindings: Fix incorrect 'reg' property sizes The examples template is a 'simple-bus' with a size of 1 cell for had between 2 and 4 cells which really only errors on I2C or SPI type devices with a single cell. The easiest fix in most cases is to change the 'reg' property to for 1 cell address and size. In some cases with child devices having 2 cells, that doesn't make sense so a bus node is needed. Acked-by: Stephen Boyd <sboyd@kernel.org> # clk Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Rob Herring <robh@kernel.org>
|
#
3d21a460 |
|
15-Apr-2020 |
Rob Herring <robh@kernel.org> |
dt-bindings: Remove cases of 'allOf' containing a '$ref' json-schema versions draft7 and earlier have a weird behavior in that any keywords combined with a '$ref' are ignored (silently). The correct form was to put a '$ref' under an 'allOf'. This behavior is now changed in the 2019-09 json-schema spec and '$ref' can be mixed with other keywords. The json-schema library doesn't yet support this, but the tooling now does a fixup for this and either way works. This has been a constant source of review comments, so let's change this treewide so everyone copies the simpler syntax. Scripted with ruamel.yaml with some manual fixups. Some minor whitespace changes from the script. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Maxime Ripard <mripard@kernel.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-By: Vinod Koul <vkoul@kernel.org> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Wolfram Sang <wsa@the-dreams.de> # for I2C Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for-iio Reviewed-by: Stephen Boyd <sboyd@kernel.org> # clock Signed-off-by: Rob Herring <robh@kernel.org>
|
#
9488ef75 |
|
17-Mar-2020 |
Mauro Carvalho Chehab <mchehab+huawei@kernel.org> |
docs: dt: display/ti: fix typos at the devicetree/ directory name The name of the devicetree directory is wrong on those three TI bindings: Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Acked-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/875b824ac97bd76dfe77b6227ff9b6b2671a6abf.1584450500.git.mchehab+huawei@kernel.org
|
#
98878d9d |
|
13-Mar-2020 |
Rob Herring <robh@kernel.org> |
dt-bindings: display: ti: Fix dtc unit-address warnings in examples Extra dtc warnings (roughly what W=1 enables) are now enabled by default when building the binding examples. These were fixed treewide in 5.6-rc5, but some new display bindings have been added with new warnings: Documentation/devicetree/bindings/display/ti/ti,am65x-dss.example.dts:21.27-49.11: Warning (unit_address_format): /example-0/dss@04a00000: unit name should not have leading 0s Documentation/devicetree/bindings/display/ti/ti,j721e-dss.example.dts:21.27-72.11: Warning (unit_address_format): /example-0/dss@04a00000: unit name should not have leading 0s Documentation/devicetree/bindings/display/ti/ti,k2g-dss.example.dts:20.27-42.11: Warning (unit_address_format): /example-0/dss@02540000: unit name should not have leading 0s Cc: Jyri Sarha <jsarha@ti.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Jyri Sarha <jsarha@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200313180727.23044-1-robh@kernel.org
|
#
2d8730f1 |
|
19-Nov-2019 |
Jyri Sarha <jsarha@ti.com> |
dt-bindings: display: ti,am65x-dss: Add dt-schema yaml binding Add dt-schema yaml bindig for AM65x DSS, AM65x version TI Keystone Display SubSystem. Version history: v2: no change v3: - Add ports node - use allOf in ti,am65x-oldi-io-ctrl to add both $ref and maxItems - Add includes to dts example - reindent dts example v4: - Add descriptions to reg and clocks properties - Remove minItems when its value is the same as maxItems value v5: - itemize reg and clocks properties' descriptions v6: - Add Reviewed-by: from Rob Herring <robh@kernel.org> and Benoit Parrot <bparrot@ti.com> v7: no change v8: no change Signed-off-by: Jyri Sarha <jsarha@ti.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Benoit Parrot <bparrot@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/1799656fb8cc42ca698fc29bbc80c1bae442d6d3.1580129724.git.jsarha@ti.com
|