dt-bindings: auxdisplay: adjust example indentation and use generic node names

The example DTS should be indented with two or four (preferred) spaces,
as mentioned in Writing Schema document. While re-indenting, change the
node names to somehow generic names, as expected by Devicetree
specification.

Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Ralf Schlatterbeck <rsc@runtux.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

dt-bindings: auxdisplay: holtek: Add missing type for "linux,no-autorepeat"

"linux,no-autorepeat" is missing a type, add it.

Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230613201049.2824028-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: Fix SPI and I2C bus node names in examples

SPI and I2C bus node names are expected to be "spi" or "i2c",
respectively, with nothing else, a unit-address, or a '-N' index. A
pattern of 'spi0' or 'i2c0' or similar has crept in. Fix all these
cases. Mostly scripted with the following commands:

git grep -l '\si2c[0-9] {' Documentation/devicetree/ | xargs sed -i -e 's/i2c[0-9] {/i2c {/'
git grep -l '\sspi[0-9] {' Documentation/devicetree/ | xargs sed -i -e 's/spi[0-9] {/spi {/'

With this, a few errors in examples were exposed and fixed.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for the microchip,mcp251xfd.yaml
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for power-supply
Acked-by: Wolfram Sang <wsa@kernel.org>
Acked-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230228215433.3944508-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: display: Drop unneeded quotes

Cleanup bindings dropping unneeded quotes. Once all these are fixed,
checking for this can be enabled in yamllint.

Reviewed-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> #display/msm
Link: https://lore.kernel.org/r/20230320233823.2919475-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>

dt-bindings: auxdisplay: ht16k33: Document LED subnode

Extend the Holtek HT16K33 LED controller Device Tree bindings with an
LED subnode, conforming to the standard LED bindings.

This allows the user to exert more control, like specifying LED color,
function, and/or trigger, to extend LED functionality beyond a simple
display backlight.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>

dt-bindings: auxdisplay: ht16k33: Document Adafruit segment displays

The Holtek HT16K33 LED controller is not only used for driving
dot-matrix displays, but also for driving segment displays.

Document compatible values for the Adafruit 7-segment[1] and
14-segment[2] FeatherWing expansion boards with red displays. According
to the schematics, all other Adafruit 7-segment and 14-segment display
backpack and FeatherWing expansion boards (including bare boards and
boards fitted with displays) are compatible with these two boards.

[1] https://www.adafruit.com/product/3108
[2] https://www.adafruit.com/product/3130

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>

dt-bindings: auxdisplay: ht16k33: Convert to json-schema

Convert the Holtek HT16K33 LED controller with keyscan Device Tree
binding documentation to json-schema.

Move the file from display to auxdisplay.
Update the example:
- Sort properties in order of documentation,
- Group tuples using angle brackets to improve human readability and
enable automatic validation.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Robin van der Gracht <robin@protonic.nl>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>