usb_serial: add WinChipHead (CH340/CH341) support

Fixes #15872.

Change-Id: I3b43094574045464ca0d3e024f8b5aac32ce5210
Reviewed-on: https://review.haiku-os.org/c/haiku/+/5401
Reviewed-by: Adrien Destugues <pulkomandy@pulkomandy.tk>
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>

usb_serial: Add new Option driver

* Option devices are generally WWAN serial
devices for 3G or lower.
* Picks up my CMOTECH Sprint 3G adaptor, need
to wire up endpoints so disabled for now.

Filtered flat import of Oliver's svn package management branch

Bring the changes that aren't package management related and the ones
that are but don't take effect as long as they are ignored by the build
system into the master.

Summary of changes:
* Introduce private header <directories.h> with constants for a good
deal of paths that should usually be retrieved via find_directory().
* Replace hard-coded paths by using find_directory() or the
<directories.h> constants (e.g. in drivers and the kernel).
* Add find_directory() constants needed for package management.
* Add __HAIKU_ABI_NAME and B_HAIKU_ABI_NAME macros.
* src/apps/deskbar: BeMenu.* -> DeskbarMenu.*,
DeskBarUtils.* -> DeskbarUtils.*
* Change deskbar menu settings directory from ~/config/be to
~/config/settings/deskbar.
* Other smaller cleanups, changes, and fixes.

Add support for Silicon Labs CP210x to usb_serial.
Not completely tested : my device has no control lines wired. RX/TX seems to
work fine, at least.

Inspiration from the Linux driver since there isn't any documentation avilable:
http://lxr.free-electrons.com/source/drivers/usb/serial/cp210x.c

The switch/case for VID/PID identification is getting quite long. Isn't there a
better way to do it ?


git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42860 a95241bf-73f2-0310-859d-f6bbb57e9c96

Flat commit of all changes from package-management branch in svn

Clean out backwards compatibility cruft, local copy of USB header, packageing
rules and support files that don't really apply anymore.


git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39763 a95241bf-73f2-0310-859d-f6bbb57e9c96

- change KLSI init the way it's done by the linux driver
- do not count usb headers as part of count returned by write(), else we might end up writing more than the passed amount :)


git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25939 a95241bf-73f2-0310-859d-f6bbb57e9c96

Rework of the usb_serial driver:
* Refactored everything to C++ with the different devices as subclasses
* Added proper ACM detection with parsing of the ACM descriptors
* Added device transfer error handling and fixed some concurency issues
* Big cleanup to conform to our style guide

This should make at least ACM stable to use. Commiting this over my K850i with
ACM compliant USB modem and UMTS data connection. Note that support for all
other device classes (Prolific, FTDI and KLSI) is untested but should work the
same as before. Note also that since we currently lack a TTY module this will
only build/work for R5 or Dano with the proper TTY headers.

git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23634 a95241bf-73f2-0310-859d-f6bbb57e9c96

This should support KLSI KL5KUSB105D based adapters, like that usb-to-serial Palm (for use with serial craddle) I got here.
If I understood the linux driver correctly it should work but it seems I didn't yet :)
For now it only lights the Terminal Ready light on my modem, doesn't get any data sent.
Is it me or the semantics with the on_write() hook is broken ? (it's made to add headers/footers to buffers, but then header size is counted as written data, while it's not data as sent to the driver...)


git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21522 a95241bf-73f2-0310-859d-f6bbb57e9c96

Fix BeOS build (the D from -D was left in).


git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20478 a95241bf-73f2-0310-859d-f6bbb57e9c96

dropped a useless arg of the KernelAddon rule, hope I don't mess anything


git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@18879 a95241bf-73f2-0310-859d-f6bbb57e9c96

* added a bunch of drivers by Siarzhuk Zharski
-> a USB Mass Storgage module (SCSI bus manager add-on)
-> a SiS 7018 AC97 driver (uses "old" audio driver interface)
-> a USB Serial driver
-> a USB Vision driver and media add-on (Haupauge WinTV USB)
* moved R3MediaDefs.h from usb_audio driver to common place
headers/private/audio (also used by SiS 7018 driver)
* added TV tuner frequency defines to data/settings/media/usb_vision

Some of these drivers are in unfinished state, particularily the
USB Vision driver, the VideoProducer doesn't seem to use it yet,
the USB Mass Storage module is known to work though, it also includes
add-ons for itself that add support for some "special" hardware, these
are not integrated with the Jamfile build system though.

Also I didn't much much time with the "CVS package" targets, the
ReadMes are not added, someone with more knowledge about this could
add them...

None of this stuff is added to the Haiku image, it is simply included
to be maintained in the Haiku tree from now on.

* fixed a bug in Video Producer sample inherited from Be Sample
code - the timing from the time source was not really used,
on some systems this could cause in the producer not waking
up at the correct time if the system time and audio card time
are drifting apart



git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@17625 a95241bf-73f2-0310-859d-f6bbb57e9c96

usb_serial: Add new Option driver

* Option devices are generally WWAN serial
devices for 3G or lower.
* Picks up my CMOTECH Sprint 3G adaptor, need
to wire up endpoints so disabled for now.

Filtered flat import of Oliver's svn package management branch

Bring the changes that aren't package management related and the ones
that are but don't take effect as long as they are ignored by the build
system into the master.

Summary of changes:
* Introduce private header <directories.h> with constants for a good
deal of paths that should usually be retrieved via find_directory().
* Replace hard-coded paths by using find_directory() or the
<directories.h> constants (e.g. in drivers and the kernel).
* Add find_directory() constants needed for package management.
* Add __HAIKU_ABI_NAME and B_HAIKU_ABI_NAME macros.
* src/apps/deskbar: BeMenu.* -> DeskbarMenu.*,
DeskBarUtils.* -> DeskbarUtils.*
* Change deskbar menu settings directory from ~/config/be to
~/config/settings/deskbar.
* Other smaller cleanups, changes, and fixes.

Add support for Silicon Labs CP210x to usb_serial.
Not completely tested : my device has no control lines wired. RX/TX seems to
work fine, at least.

Inspiration from the Linux driver since there isn't any documentation avilable:
http://lxr.free-electrons.com/source/drivers/usb/serial/cp210x.c

The switch/case for VID/PID identification is getting quite long. Isn't there a
better way to do it ?


git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42860 a95241bf-73f2-0310-859d-f6bbb57e9c96

Flat commit of all changes from package-management branch in svn

Clean out backwards compatibility cruft, local copy of USB header, packageing
rules and support files that don't really apply anymore.


git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@39763 a95241bf-73f2-0310-859d-f6bbb57e9c96

- change KLSI init the way it's done by the linux driver
- do not count usb headers as part of count returned by write(), else we might end up writing more than the passed amount :)


git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@25939 a95241bf-73f2-0310-859d-f6bbb57e9c96

Rework of the usb_serial driver:
* Refactored everything to C++ with the different devices as subclasses
* Added proper ACM detection with parsing of the ACM descriptors
* Added device transfer error handling and fixed some concurency issues
* Big cleanup to conform to our style guide

This should make at least ACM stable to use. Commiting this over my K850i with
ACM compliant USB modem and UMTS data connection. Note that support for all
other device classes (Prolific, FTDI and KLSI) is untested but should work the
same as before. Note also that since we currently lack a TTY module this will
only build/work for R5 or Dano with the proper TTY headers.

git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23634 a95241bf-73f2-0310-859d-f6bbb57e9c96

This should support KLSI KL5KUSB105D based adapters, like that usb-to-serial Palm (for use with serial craddle) I got here.
If I understood the linux driver correctly it should work but it seems I didn't yet :)
For now it only lights the Terminal Ready light on my modem, doesn't get any data sent.
Is it me or the semantics with the on_write() hook is broken ? (it's made to add headers/footers to buffers, but then header size is counted as written data, while it's not data as sent to the driver...)


git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@21522 a95241bf-73f2-0310-859d-f6bbb57e9c96

Fix BeOS build (the D from -D was left in).


git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20478 a95241bf-73f2-0310-859d-f6bbb57e9c96

dropped a useless arg of the KernelAddon rule, hope I don't mess anything


git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@18879 a95241bf-73f2-0310-859d-f6bbb57e9c96

* added a bunch of drivers by Siarzhuk Zharski
-> a USB Mass Storgage module (SCSI bus manager add-on)
-> a SiS 7018 AC97 driver (uses "old" audio driver interface)
-> a USB Serial driver
-> a USB Vision driver and media add-on (Haupauge WinTV USB)
* moved R3MediaDefs.h from usb_audio driver to common place
headers/private/audio (also used by SiS 7018 driver)
* added TV tuner frequency defines to data/settings/media/usb_vision

Some of these drivers are in unfinished state, particularily the
USB Vision driver, the VideoProducer doesn't seem to use it yet,
the USB Mass Storage module is known to work though, it also includes
add-ons for itself that add support for some "special" hardware, these
are not integrated with the Jamfile build system though.

Also I didn't much much time with the "CVS package" targets, the
ReadMes are not added, someone with more knowledge about this could
add them...

None of this stuff is added to the Haiku image, it is simply included
to be maintained in the Haiku tree from now on.

* fixed a bug in Video Producer sample inherited from Be Sample
code - the timing from the time source was not really used,
on some systems this could cause in the producer not waking
up at the correct time if the system time and audio card time
are drifting apart



git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@17625 a95241bf-73f2-0310-859d-f6bbb57e9c96