#
3b91d73b |
|
16-Dec-2022 |
X512 <danger_mail@list.ru> |
bus & drivers: drop PCI_x86 Change-Id: I494deaf24a4793a5e0fe9fa46ecdce32f65e616a Reviewed-on: https://review.haiku-os.org/c/haiku/+/6226 Reviewed-by: waddlesplash <waddlesplash@gmail.com> Reviewed-by: Fredrik Holmqvist <fredrik.holmqvist@gmail.com>
|
#
c2cfbd70 |
|
09-Aug-2013 |
Jerome Duval <jerome.duval@gmail.com> |
intel_extreme: add MSI support
|
#
c788baed |
|
16-Oct-2011 |
Michael Lotz <mmlr@mlotz.ch> |
Style cleanups only, no functional change. * Make the pointer style consistent accross all components, which should make it easier when working all over the place. * 80 char limits. git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42863 a95241bf-73f2-0310-859d-f6bbb57e9c96
|
#
f0468be3 |
|
15-Oct-2011 |
Michael Lotz <mmlr@mlotz.ch> |
* Rework how registers are accessed. Most registers are now grouped into register blocks and we encode their block into the register definition. On register access these blocks are then translated into the final address. * Set up the register blocks for (G)MCH and PCH variants. * Remove most SandyBridge code that was actually PCH specific and is now taken care of automatically. * This will temporarily break SandyBridge support again until the right transcoders are actually programmed. git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42857 a95241bf-73f2-0310-859d-f6bbb57e9c96
|
#
b3be7a41 |
|
25-Nov-2009 |
Axel Dörfler <axeld@pinc-software.de> |
* Replaced benaphore use with a mutex. git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@34236 a95241bf-73f2-0310-859d-f6bbb57e9c96
|
#
1c34b9b1 |
|
29-Jan-2008 |
Axel Dörfler <axeld@pinc-software.de> |
Work in progress (might not work for you yet): * Now uses the AGP GART module for memory management. This greatly simplifies the memory handling, and memory is now actually allocated on demand, instead of a fixed size (stolen memory is not freed, though). * The Intel GART module should now also work with older chipsets. * No longer remove the GTT size from the stolen memory; this appears to have been a mistake in the X driver. Not sure about the BIOS popup yet. * The AGP module (in combination with the Intel GART module) is now mandatory to use the Intel driver. * Removed now superfluous settings (like memory size). Only enabling/disabling the hardware cursor is still supported. git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23781 a95241bf-73f2-0310-859d-f6bbb57e9c96
|
#
4dfa9e42 |
|
23-Jan-2008 |
Axel Dörfler <axeld@pinc-software.de> |
Some work in progress: * set_gtt_entry() used the wrong index to fill the GTT - this could have never worked correctly when you specified more memory than the amount of stolen memory. * Implementing maintaining resources for emulating overlay using the 3D engine on i965. I don't yet commit the actual overlay code, as that is a) ugly, and b) does not work yet. * Moved AreaKeeper into its own header. * Minor cleanup. git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23709 a95241bf-73f2-0310-859d-f6bbb57e9c96
|
#
4955c11b |
|
14-May-2006 |
Axel Dörfler <axeld@pinc-software.de> |
* Moved the intel_info structure and prototypes from intel_extreme.cpp from the shared headers into intel_extreme_private.h. * Removed non-memory-mapped definitions from driver.h. git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@17452 a95241bf-73f2-0310-859d-f6bbb57e9c96
|
#
020c1aa8 |
|
03-Apr-2006 |
Axel Dörfler <axeld@pinc-software.de> |
* init_driver() now behaves better in low memory situations. * Some preparations to support more than one chipset, added i855G (device ID 0x3582) to test with - the accelerant_device_info is now filled with that additional data as well. * Some minor cleanup. git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16982 a95241bf-73f2-0310-859d-f6bbb57e9c96
|
#
e404297e |
|
24-Mar-2006 |
Axel Dörfler <axeld@pinc-software.de> |
Very basic driver for the "Intel Extreme Graphics 2" chips, only supports i865G for now. Only mode switches do work, doesn't yet make sure the mode is valid, though. At this point, this driver only works on Haiku, the R5 app_server is crashing for some reason I need to investigate some day (maybe tomorrow :)). git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16872 a95241bf-73f2-0310-859d-f6bbb57e9c96
|
#
c2cfbd70fea3737090397be943b8b876541e9f34 |
|
09-Aug-2013 |
Jerome Duval <jerome.duval@gmail.com> |
intel_extreme: add MSI support
|
#
c788baed28e28960c17306fe9f5b40382b07cb1d |
|
16-Oct-2011 |
Michael Lotz <mmlr@mlotz.ch> |
Style cleanups only, no functional change. * Make the pointer style consistent accross all components, which should make it easier when working all over the place. * 80 char limits. git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42863 a95241bf-73f2-0310-859d-f6bbb57e9c96
|
#
f0468be3845a6f7318a5a4f4dadcd62f7ed4ee22 |
|
15-Oct-2011 |
Michael Lotz <mmlr@mlotz.ch> |
* Rework how registers are accessed. Most registers are now grouped into register blocks and we encode their block into the register definition. On register access these blocks are then translated into the final address. * Set up the register blocks for (G)MCH and PCH variants. * Remove most SandyBridge code that was actually PCH specific and is now taken care of automatically. * This will temporarily break SandyBridge support again until the right transcoders are actually programmed. git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42857 a95241bf-73f2-0310-859d-f6bbb57e9c96
|
#
b3be7a4135863bcf10210ddcbb879bd822ee3a17 |
|
25-Nov-2009 |
Axel Dörfler <axeld@pinc-software.de> |
* Replaced benaphore use with a mutex. git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@34236 a95241bf-73f2-0310-859d-f6bbb57e9c96
|
#
1c34b9b1f5e168501f89a270233457e04aa1b16b |
|
29-Jan-2008 |
Axel Dörfler <axeld@pinc-software.de> |
Work in progress (might not work for you yet): * Now uses the AGP GART module for memory management. This greatly simplifies the memory handling, and memory is now actually allocated on demand, instead of a fixed size (stolen memory is not freed, though). * The Intel GART module should now also work with older chipsets. * No longer remove the GTT size from the stolen memory; this appears to have been a mistake in the X driver. Not sure about the BIOS popup yet. * The AGP module (in combination with the Intel GART module) is now mandatory to use the Intel driver. * Removed now superfluous settings (like memory size). Only enabling/disabling the hardware cursor is still supported. git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23781 a95241bf-73f2-0310-859d-f6bbb57e9c96
|
#
4dfa9e425fef3a6105e1cd97c4d4324f339f5614 |
|
23-Jan-2008 |
Axel Dörfler <axeld@pinc-software.de> |
Some work in progress: * set_gtt_entry() used the wrong index to fill the GTT - this could have never worked correctly when you specified more memory than the amount of stolen memory. * Implementing maintaining resources for emulating overlay using the 3D engine on i965. I don't yet commit the actual overlay code, as that is a) ugly, and b) does not work yet. * Moved AreaKeeper into its own header. * Minor cleanup. git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23709 a95241bf-73f2-0310-859d-f6bbb57e9c96
|
#
4955c11be9aeaff376e59315955d002c840ef4c8 |
|
14-May-2006 |
Axel Dörfler <axeld@pinc-software.de> |
* Moved the intel_info structure and prototypes from intel_extreme.cpp from the shared headers into intel_extreme_private.h. * Removed non-memory-mapped definitions from driver.h. git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@17452 a95241bf-73f2-0310-859d-f6bbb57e9c96
|
#
020c1aa823222f456bcf1ef94ab229690786d60d |
|
03-Apr-2006 |
Axel Dörfler <axeld@pinc-software.de> |
* init_driver() now behaves better in low memory situations. * Some preparations to support more than one chipset, added i855G (device ID 0x3582) to test with - the accelerant_device_info is now filled with that additional data as well. * Some minor cleanup. git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16982 a95241bf-73f2-0310-859d-f6bbb57e9c96
|
#
e404297e56d4d54998a8f21b661def9d2da746d6 |
|
24-Mar-2006 |
Axel Dörfler <axeld@pinc-software.de> |
Very basic driver for the "Intel Extreme Graphics 2" chips, only supports i865G for now. Only mode switches do work, doesn't yet make sure the mode is valid, though. At this point, this driver only works on Haiku, the R5 app_server is crashing for some reason I need to investigate some day (maybe tomorrow :)). git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16872 a95241bf-73f2-0310-859d-f6bbb57e9c96
|