Remove all invocations of SetSubDirSupportedPlatformsBeOSCompatible.

Removal of non-Haiku target platform logic from build system (part 1.)

Following recent changes to use libroot_build on Haiku also, it is now
actually impossible to build Haiku components on non-Haiku platforms
(BeOS R5, Dan0, BONE, Zeta), so we can remove any logic related to this.

This is only the first part; still to be removed are:
* SetSubDirSupportedPlatformsBeOSCompatible
* HOST_PLATFORM_BEOS_COMPATIBLE
* TARGET_PLATFORM_BEOS_COMPATIBLE

Remove the old "CVS" package rules

... and all their invocations.

* Made at least scsi_cmd_rw_10 the same as the one in private/drivers/scsi_cmds.h;
ideally, we would only have one file and no copies - later.
* That also changed how READ/WRITE_6 commands are translated to READ/WRITE_10
commands, but it was obviously correct before, at least I can still reproduce
bug #1577 (so it has to be something else).
* Spotted a few suspicious uses of transform_6_10() vs. transform_cmd_6_10();
at least the FreeBSD driver seem to work differently here, anyway (it always
uses 12 byte commands for most of these).
* Cleaned up the file.


git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22838 a95241bf-73f2-0310-859d-f6bbb57e9c96

* Switched from the old v2 callback status codes to the new v3 codes
This means that the usb_callback_func now takes a status_t instead of a uint32 status.
Also the error codes are now different. I don't see this as a real problem in binary compatibility, as the status codes were never really documented and most drivers just assumed that a nonzero status meant an error.
Source compatibility breaks for callback functions and error defines. I fixed (hopefully) all places in the tree that are currenty included in the image and affected by the change.
* Corrected error reporting in UHCI and EHCI using the new status codes.
* Fixed a memory leak in EHCI where the async advance interrupt was not triggered in time.
* Fixed another race condition in usb_raw that could cause a crash when a device is removed while a transfer is pending.

git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@18916 a95241bf-73f2-0310-859d-f6bbb57e9c96

dropped a useless arg of the KernelAddon rule, hope I don't mess anything


git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@18879 a95241bf-73f2-0310-859d-f6bbb57e9c96

Renaming the USB Mass Storage driver from "usb" to "usb_scsi". There is a naming conflict with the USB bus_manager.
The bus_manager files were compiled but were not used for linking the "usb" bus_manager module.
I only found this out by looking at the binary and finding strange strings that were for sure not in the USB stack.

git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@17679 a95241bf-73f2-0310-859d-f6bbb57e9c96

* added a bunch of drivers by Siarzhuk Zharski
-> a USB Mass Storgage module (SCSI bus manager add-on)
-> a SiS 7018 AC97 driver (uses "old" audio driver interface)
-> a USB Serial driver
-> a USB Vision driver and media add-on (Haupauge WinTV USB)
* moved R3MediaDefs.h from usb_audio driver to common place
headers/private/audio (also used by SiS 7018 driver)
* added TV tuner frequency defines to data/settings/media/usb_vision

Some of these drivers are in unfinished state, particularily the
USB Vision driver, the VideoProducer doesn't seem to use it yet,
the USB Mass Storage module is known to work though, it also includes
add-ons for itself that add support for some "special" hardware, these
are not integrated with the Jamfile build system though.

Also I didn't much much time with the "CVS package" targets, the
ReadMes are not added, someone with more knowledge about this could
add them...

None of this stuff is added to the Haiku image, it is simply included
to be maintained in the Haiku tree from now on.

* fixed a bug in Video Producer sample inherited from Be Sample
code - the timing from the time source was not really used,
on some systems this could cause in the producer not waking
up at the correct time if the system time and audio card time
are drifting apart



git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@17625 a95241bf-73f2-0310-859d-f6bbb57e9c96

Remove the old "CVS" package rules

... and all their invocations.

* Made at least scsi_cmd_rw_10 the same as the one in private/drivers/scsi_cmds.h;
ideally, we would only have one file and no copies - later.
* That also changed how READ/WRITE_6 commands are translated to READ/WRITE_10
commands, but it was obviously correct before, at least I can still reproduce
bug #1577 (so it has to be something else).
* Spotted a few suspicious uses of transform_6_10() vs. transform_cmd_6_10();
at least the FreeBSD driver seem to work differently here, anyway (it always
uses 12 byte commands for most of these).
* Cleaned up the file.


git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22838 a95241bf-73f2-0310-859d-f6bbb57e9c96

* Switched from the old v2 callback status codes to the new v3 codes
This means that the usb_callback_func now takes a status_t instead of a uint32 status.
Also the error codes are now different. I don't see this as a real problem in binary compatibility, as the status codes were never really documented and most drivers just assumed that a nonzero status meant an error.
Source compatibility breaks for callback functions and error defines. I fixed (hopefully) all places in the tree that are currenty included in the image and affected by the change.
* Corrected error reporting in UHCI and EHCI using the new status codes.
* Fixed a memory leak in EHCI where the async advance interrupt was not triggered in time.
* Fixed another race condition in usb_raw that could cause a crash when a device is removed while a transfer is pending.

git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@18916 a95241bf-73f2-0310-859d-f6bbb57e9c96

dropped a useless arg of the KernelAddon rule, hope I don't mess anything


git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@18879 a95241bf-73f2-0310-859d-f6bbb57e9c96

Renaming the USB Mass Storage driver from "usb" to "usb_scsi". There is a naming conflict with the USB bus_manager.
The bus_manager files were compiled but were not used for linking the "usb" bus_manager module.
I only found this out by looking at the binary and finding strange strings that were for sure not in the USB stack.

git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@17679 a95241bf-73f2-0310-859d-f6bbb57e9c96

* added a bunch of drivers by Siarzhuk Zharski
-> a USB Mass Storgage module (SCSI bus manager add-on)
-> a SiS 7018 AC97 driver (uses "old" audio driver interface)
-> a USB Serial driver
-> a USB Vision driver and media add-on (Haupauge WinTV USB)
* moved R3MediaDefs.h from usb_audio driver to common place
headers/private/audio (also used by SiS 7018 driver)
* added TV tuner frequency defines to data/settings/media/usb_vision

Some of these drivers are in unfinished state, particularily the
USB Vision driver, the VideoProducer doesn't seem to use it yet,
the USB Mass Storage module is known to work though, it also includes
add-ons for itself that add support for some "special" hardware, these
are not integrated with the Jamfile build system though.

Also I didn't much much time with the "CVS package" targets, the
ReadMes are not added, someone with more knowledge about this could
add them...

None of this stuff is added to the Haiku image, it is simply included
to be maintained in the Haiku tree from now on.

* fixed a bug in Video Producer sample inherited from Be Sample
code - the timing from the time source was not really used,
on some systems this could cause in the producer not waking
up at the correct time if the system time and audio card time
are drifting apart



git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@17625 a95241bf-73f2-0310-859d-f6bbb57e9c96