| #
648db733 |
|
03-Jan-2013 |
Jérôme Duval <jerome.duval@gmail.com> |
Update FreeBSD network drivers with the 9.1 release
|
| #
8060e778 |
|
08-Feb-2012 |
Jérôme Duval <jerome.duval@gmail.com> |
Network drivers are updated from FreeBSD 9.0
* updated drivers are 3com, ar81xx, atheros813x, attansic_l1, attansic_l2,
broadcom440x, broadcom570x, dec21xxx, ipro100, ipro1000, jmicron2x0,
marvell_yukon, nforce, rtl8139, rtl81xx, syskonnect, via_rhine, vt612x
|
| #
d1e17090 |
|
23-Aug-2011 |
Siarzhuk Zharski <zharik@gmx.li> |
* ipro1000 driver updated to FreeBSD 8.2 level:
it incorporate now "em" and "lem" freebsd drivers.
Note: if_igb is not used - too much "undeclared"
stuff required from the compatibility layer. :-(
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42680 a95241bf-73f2-0310-859d-f6bbb57e9c96
|
| #
2d3e6927 |
|
05-Jun-2011 |
Fredrik Modeen <fredrik@modeen.se> |
Reverting so I can work on it without disturbing the GSoC project ;)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41940 a95241bf-73f2-0310-859d-f6bbb57e9c96
|
| #
981bdb5a |
|
29-May-2011 |
Fredrik Modeen <fredrik@modeen.se> |
Hope I fix more than I breake with this update of ipro1000
it's taken from freebsd driver e1000 r221505
This include alot of cards (including my HP)
I had to "remove" som parts. led was the easiest part. All code shoulc have haiku in them
The part below was perhaps needed but I could not fix the error that whas showing (located in if_em.c) aslo it works as is on my HP 8540.
static int
em_sysctl_reg_handler(SYSCTL_HANDLER_ARGS)
{
struct adapter *adapter;
u_int val;
adapter = oidp->oid_arg1;
val = E1000_READ_REG(&adapter->hw, oidp->oid_arg2);
return (sysctl_handle_int(oidp, &val, 0, req));
}
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41815 a95241bf-73f2-0310-859d-f6bbb57e9c96
|
| #
ab64e1fa |
|
18-Feb-2009 |
Karsten Heimrich <host.haiku@gmx.de> |
* integrate e1000 FreeBSD driver
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29246 a95241bf-73f2-0310-859d-f6bbb57e9c96
|
| #
8060e7787fa3f8e45f8a148e968d8f99ef094623 |
|
08-Feb-2012 |
Jérôme Duval <jerome.duval@gmail.com> |
Network drivers are updated from FreeBSD 9.0
* updated drivers are 3com, ar81xx, atheros813x, attansic_l1, attansic_l2,
broadcom440x, broadcom570x, dec21xxx, ipro100, ipro1000, jmicron2x0,
marvell_yukon, nforce, rtl8139, rtl81xx, syskonnect, via_rhine, vt612x
|
| #
d1e1709087f986fa437f3db30d0beff372fd6864 |
|
23-Aug-2011 |
Siarzhuk Zharski <zharik@gmx.li> |
* ipro1000 driver updated to FreeBSD 8.2 level:
it incorporate now "em" and "lem" freebsd drivers.
Note: if_igb is not used - too much "undeclared"
stuff required from the compatibility layer. :-(
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@42680 a95241bf-73f2-0310-859d-f6bbb57e9c96
|
| #
2d3e6927ca1c7f9919e645c21e033d3cf8f143ae |
|
05-Jun-2011 |
Fredrik Modeen <fredrik@modeen.se> |
Reverting so I can work on it without disturbing the GSoC project ;)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41940 a95241bf-73f2-0310-859d-f6bbb57e9c96
|
| #
981bdb5af9b06b73a0d9cdb837d563e6ed41e499 |
|
29-May-2011 |
Fredrik Modeen <fredrik@modeen.se> |
Hope I fix more than I breake with this update of ipro1000
it's taken from freebsd driver e1000 r221505
This include alot of cards (including my HP)
I had to "remove" som parts. led was the easiest part. All code shoulc have haiku in them
The part below was perhaps needed but I could not fix the error that whas showing (located in if_em.c) aslo it works as is on my HP 8540.
static int
em_sysctl_reg_handler(SYSCTL_HANDLER_ARGS)
{
struct adapter *adapter;
u_int val;
adapter = oidp->oid_arg1;
val = E1000_READ_REG(&adapter->hw, oidp->oid_arg2);
return (sysctl_handle_int(oidp, &val, 0, req));
}
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41815 a95241bf-73f2-0310-859d-f6bbb57e9c96
|
| #
ab64e1faa3a9d5ff9f968572f034915f1fb64ddc |
|
18-Feb-2009 |
Karsten Heimrich <host.haiku@gmx.de> |
* integrate e1000 FreeBSD driver
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@29246 a95241bf-73f2-0310-859d-f6bbb57e9c96
|