sound: remove PCM_KLDSTRING() and fix status strings

PCM_KLDSTRING() prints the kernel module associated with a given audio
device only when that module is not compiled in. Get rid of
PCM_KLDSTRING() altogether and print the driver name (even for modules
that are compiled in) instead, as it implies the module as well.

While here, convert all status strings to the following dmesg-like
format:

[<port|mem> <irq>] on <driver>

Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Reviewed by: markj, imp
Differential Revision: https://reviews.freebsd.org/D43349

sys: Remove SND_DECLARE_FILE

Reviewed by: kbowling, imp, emaste
Differential Revision: https://reviews.freebsd.org/D41499

sys: Remove $FreeBSD$: sound driver version

Remove /SND_DECLARE_FILE\("\$FreeBSD\$"\);/

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.

Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix

Remove pcm_devclass from DRIVER_MODULE invocations.

cs4281: eliminate write only variable codecno

Sponsored by: Netflix

sound(4): Remove pointless Giant from bus_dma_tag_create().

None of the drivers really implement asynchronous buffer loading, so
they don't need lock there. The only question is which of them have
BUS_DMA_NOWAIT flag there already, and to which it should be added.

sys/dev: further adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.

Use uintmax_t (typedef'd to rman_res_t type) for rman ranges.

On some architectures, u_long isn't large enough for resource definitions.
Particularly, powerpc and arm allow 36-bit (or larger) physical addresses, but
type `long' is only 32-bit. This extends rman's resources to uintmax_t. With
this change, any resource can feasibly be placed anywhere in physical memory
(within the constraints of the driver).

Why uintmax_t and not something machine dependent, or uint64_t? Though it's
possible for uintmax_t to grow, it's highly unlikely it will become 128-bit on
32-bit architectures. 64-bit architectures should have plenty of RAM to absorb
the increase on resource sizes if and when this occurs, and the number of
resources on memory-constrained systems should be sufficiently small as to not
pose a drastic overhead. That being said, uintmax_t was chosen for source
clarity. If it's specified as uint64_t, all printf()-like calls would either
need casts to uintmax_t, or be littered with PRI*64 macros. Casts to uintmax_t
aren't horrible, but it would also bake into the API for
resource_list_print_type() either a hidden assumption that entries get cast to
uintmax_t for printing, or these calls would need the PRI*64 macros. Since
source code is meant to be read more often than written, I chose the clearest
path of simply using uintmax_t.

Tested on a PowerPC p5020-based board, which places all device resources in
0xfxxxxxxxx, and has 8GB RAM.
Regression tested on qemu-system-i386
Regression tested on qemu-system-mips (malta profile)

Tested PAE and devinfo on virtualbox (live CD)

Special thanks to bz for his testing on ARM.

Reviewed By: bz, jhb (previous)
Relnotes: Yes
Sponsored by: Alex Perez/Inertial Computing
Differential Revision: https://reviews.freebsd.org/D4544

Replace several bus_alloc_resource() calls with bus_alloc_resource_any()

Most of these are BARs, and we allocate them in their entirety. The one outlier
in this is amdsbwd, which calls bus_set_resource() prior.

Reviewed by: jhb
Differential Revision: https://reviews.freebsd.org/D5370 (partial)

Remove check for obsolete FreeBSD versions

PR: 194517
Submitted by: François Tigeot <ftigeot@wolfpond.org>

Update PCI drivers to no longer look at the MEMIO-enabled bit in the PCI
command register. The lazy BAR allocation code in FreeBSD sometimes
disables this bit when it detects a range conflict, and will re-enable
it on demand when a driver allocates the BAR. Thus, the bit is no longer
a reliable indication of capability, and should not be checked. This
results in the elimination of a lot of code from drivers, and also gives
the opportunity to simplify a lot of drivers to use a helper API to set
the busmaster enable bit.

This changes fixes some recent reports of disk controllers and their
associated drives/enclosures disappearing during boot.

Submitted by: jhb
Reviewed by: jfv, marius, achadd, achim
MFC after: 1 day

A new jail(8) with a configuration file, to replace the work currently done
by /etc/rc.d/jail.

Sound Mega-commit. Expect further cleanup until code freeze.

For a slightly thorough explaination, please refer to
[1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html .

Summary of changes includes:

1 Volume Per-Channel (vpc). Provides private / standalone volume control
unique per-stream pcm channel without touching master volume / pcm.
Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for
backwards compatibility, SOUND_MIXER_PCM through the opened dsp device
instead of /dev/mixer. Special "bypass" mode is enabled through
/dev/mixer which will automatically detect if the adjustment is made
through /dev/mixer and forward its request to this private volume
controller. Changes to this volume object will not interfere with
other channels.

Requirements:
- SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which
require specific application modifications (preferred).
- No modifications required for using bypass mode, so applications
like mplayer or xmms should work out of the box.

Kernel hints:
- hint.pcm.%d.vpc (0 = disable vpc).

Kernel sysctls:
- hw.snd.vpc_mixer_bypass (default: 1). Enable or disable /dev/mixer
bypass mode.
- hw.snd.vpc_autoreset (default: 1). By default, closing/opening
/dev/dsp will reset the volume back to 0 db gain/attenuation.
Setting this to 0 will preserve its settings across device
closing/opening.
- hw.snd.vpc_reset (default: 0). Panic/reset button to reset all
volume settings back to 0 db.
- hw.snd.vpc_0db (default: 45). 0 db relative to linear mixer value.

2 High quality fixed-point Bandlimited SINC sampling rate converter,
based on Julius O'Smith's Digital Audio Resampling -
http://ccrma.stanford.edu/~jos/resample/. It includes a filter design
script written in awk (the clumsiest joke I've ever written)
- 100% 32bit fixed-point, 64bit accumulator.
- Possibly among the fastest (if not fastest) of its kind.
- Resampling quality is tunable, either runtime or during kernel
compilation (FEEDER_RATE_PRESETS).
- Quality can be further customized during kernel compilation by
defining FEEDER_RATE_PRESETS in /etc/make.conf.

Kernel sysctls:
- hw.snd.feeder_rate_quality.
0 - Zero-order Hold (ZOH). Fastest, bad quality.
1 - Linear Interpolation (LINEAR). Slightly slower than ZOH,
better quality but still does not eliminate aliasing.
2 - (and above) - Sinc Interpolation(SINC). Best quality. SINC
quality always start from 2 and above.

Rough quality comparisons:
- http://people.freebsd.org/~ariff/z_comparison/

3 Bit-perfect mode. Bypasses all feeder/dsp effects. Pure sound will be
directly fed into the hardware.

4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can
be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf.

5 Transparent/Adaptive Virtual Channel. Now you don't have to disable
vchans in order to make digital format pass through. It also makes
vchans more dynamic by choosing a better format/rate among all the
concurrent streams, which means that dev.pcm.X.play.vchanformat/rate
becomes sort of optional.

6 Exclusive Stream, with special open() mode O_EXCL. This will "mute"
other concurrent vchan streams and only allow a single channel with
O_EXCL set to keep producing sound.

Other Changes:
* most feeder_* stuffs are compilable in userland. Let's not
speculate whether we should go all out for it (save that for
FreeBSD 16.0-RELEASE).
* kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org>
* pull out channel mixing logic out of vchan.c and create its own
feeder_mixer for world justice.
* various refactoring here and there, for good or bad.
* activation of few more OSSv4 ioctls() (see [1] above).
* opt_snd.h for possible compile time configuration:
(mostly for debugging purposes, don't try these at home)
SND_DEBUG
SND_DIAGNOSTIC
SND_FEEDER_MULTIFORMAT
SND_FEEDER_FULL_MULTIFORMAT
SND_FEEDER_RATE_HP
SND_PCM_64
SND_OLDSTEREO

Manual page updates are on the way.

Tested by: joel, Olivier SMEDTS <olivier at gid0 d org>, too many
unsung / unnamed heroes.

Separate comments from the license text.

- Import the HEAD csup code which is the basis for the cvsmode work.

Flush remaining malloc() cleanups (M_NOWAIT -> M_WAITOK).

Filter/compress the amount of channel trigger. This should reduce
much of lock/unlock contentions within the interrupt handler. Most
of these drivers only need PCMTRIG_START or STOP (ABORT).

Discussed with: scottl

sndbuf_alloc() now accept dmaflags argument which will be forwarded to
internal bus_dmammem_alloc() for greater flexibility on setting up DMA /
page attributes.

MFp4 (114068):
Use bus_get_dma_tag() to obtain the parent DMA tag to make the drivers
a little bit more non-ia32/amd64 friendly.

There is no man page for bus_get_dma_tag, so this is modelled after
rev. 1.62 of src/sys/dev/sound/pci/es137x.c by marius.

Inspired by: commit by marius

Use BUS_PROBE_DEFAULT in preference to 0 and BUS_PROBE_LOW_PRIORITY in
preference to some random negative number to allow other drivers a
bite at the apple.

Start each of the license/copyright comments with /*-, minor shuffle of lines

Rename the sound device drivers:

- `sound'
The generic sound driver, always required.

- `snd_*'
Device-dependent drivers, named after the sound module names.
Configure accordingly to your hardware.

In addition, rename the `snd_pcm' module to `sound' in order to sync
with the driver names.

Suggested by: cg

Convert callers to the new bus_alloc_resource_any(9) API.

Submitted by: Mark Santcroos <marks@ripe.net>
Reviewed by: imp, dfr, bde

Augment /dev/sndstat with the module names, if applicable.

Approved by: tanimura (mentor)

Use PCIR_BAR(x) instead of PCIR_MAPS.

Glanced over by: imp, gibbs
Tested by: i386 LINT

Prefer new location of pci include files (which have only been in the
tree for two or more years now), except in a few places where there's
code to be compatible with older versions of FreeBSD.

Mega busdma API commit.

Add two new arguments to bus_dma_tag_create(): lockfunc and lockfuncarg.
Lockfunc allows a driver to provide a function for managing its locking
semantics while using busdma. At the moment, this is used for the
asynchronous busdma_swi and callback mechanism. Two lockfunc implementations
are provided: busdma_lock_mutex() performs standard mutex operations on the
mutex that is specified from lockfuncarg. dftl_lock() is a panic
implementation and is defaulted to when NULL, NULL are passed to
bus_dma_tag_create(). The only time that NULL, NULL should ever be used is
when the driver ensures that bus_dmamap_load() will not be deferred.
Drivers that do not provide their own locking can pass
busdma_lock_mutex,&Giant args in order to preserve the former behaviour.

sparc64 and powerpc do not provide real busdma_swi functions, so this is
largely a noop on those platforms. The busdma_swi on is64 is not properly
locked yet, so warnings will be emitted on this platform when busdma
callback deferrals happen.

If anyone gets panics or warnings from dflt_lock() being called, please
let me know right away.

Reviewed by: tmm, gibbs

Implement a "sndbuf_getbufaddr" function and use it instead of vtophys().

Reviewed by: orion

Consolidate MIN/MAX macros into one place (param.h).

Submitted by: Hiten Pandya <hiten@unixdaemons.com>

s/AC97_MIX_PHONES/AC97_MIX_AUXOUT/ to match ac97r2.{2,3}.

Attempt to determine what function of AUX_OUT is: "True line level
out", "Headphone out", or "4-Channel out" and frig OSS mixer label
accordingly.

Addresses problem raised by Randy Bush on -multimedia of not being
able to hear audio on ich2 m/b which was eventually found to be
because the mixer monitor value was 0. On this h/w the label
"monitor" should now be presented as the marginally more intuitive
"ogain".

use pcm_getbuffersize()

Return updated blocksize from setblocksize function.

Fix return value of cs4281chan_setblocksize.

many changes:

* add new channels to the end of the list so channels used in order of
addition

* de-globalise definition of struct snddev_info and provide accessor
functions where necessary.

* move the $FreeBSD$ tag in each .c file into a macro and allow the
/dev/sndstat handler to display these when set to maximum verbosity to aid
debugging.

* allow each device to register its own sndstat handler to reduce the amount
of groping sndstat must do in foreign structs.

Use the M_ZERO flag to malloc(9)

Reviewed by: cg
MFC after: 1 week

use a global devclass for all drivers - i'm not entirely sure why this
worked before.

mixer, dsp and sndstat are seperate devices - give them their own cdevsws
instead of demuxing requests sent to a single cdevsw.

use the si_drv1/si_drv2 fields in dev_t structures for holding information
specific to an open instance of mixer/dsp.

nuke /dev/{dsp,dspW,audio}[0-9]* links - this functionality is now provided
using cloning.

various locking fixes.

Add power on to start sequence for 4.x kernels.

PR: kern/26255
Submitted by: WATANABE Kiyoshi <aab10490@pop16.odn.ne.jp>

mega-commit.

this introduces a new buffering mechanism which results in dramatic
simplification of the channel manager.

as several structures have changed, we take the opportunity to move their
definitions into the source files where they are used, make them private and
de-typedef them.

the sound drivers are updated to use snd_setup_intr instead of
bus_setup_intr, and to comply with the de-typedefed structures.

the ac97, mixer and channel layers have been updated with finegrained
locking, as have some drivers- not all though. the rest will follow soon.

only mess with the power state on 5.x

add power management support.

Submitted by: Orion Hodson <O.Hodson@cs.ucl.ac.uk>

add driver for CS4281 sound chips

Submitted by: Orion Hodson <O.Hodson@cs.ucl.ac.uk>