#
685dc743 |
|
16-Aug-2023 |
Warner Losh <imp@FreeBSD.org> |
sys: Remove $FreeBSD$: one-line .c pattern Remove /^[\s*]*__FBSDID\("\$FreeBSD\$"\);?\s*\n/
|
#
4d846d26 |
|
10-May-2023 |
Warner Losh <imp@FreeBSD.org> |
spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch up to that fact and revert to their recommended match of BSD-2-Clause. Discussed with: pfg MFC After: 3 days Sponsored by: Netflix
|
#
54ab3b4a |
|
17-Aug-2022 |
Justin Hibbits <jhibbits@FreeBSD.org> |
Mechanically convert qlxgbe(4) to IfAPI Reviewed by: zlei Sponsored by: Juniper Networks, Inc. Differential Revision: https://reviews.freebsd.org/D37821
|
#
bd78d17c |
|
22-Jun-2022 |
Elliott Mitchell <ehem+freebsd@m5p.com> |
qlxgbe: purge EOL release compatibility Drop code that differentiated between FreeBSD 10 and 11. Reviewed by: imp Pull Request: https://github.com/freebsd/freebsd-src/pull/603 Differential Revision: https://reviews.freebsd.org/D35560
|
#
618aa8cd |
|
22-Apr-2022 |
John Baldwin <jhb@FreeBSD.org> |
qlxgb/qlxgbe/qlxge: Fix build without INET and/or without INET6. This is in preparation for adding these drivers to amd64 NOTES.
|
#
2c4a3d0a |
|
01-Sep-2020 |
Mateusz Guzik <mjg@FreeBSD.org> |
qlxgbe: clean up empty lines in .c and .h files
|
#
7e0025de |
|
29-Aug-2019 |
Ed Maste <emaste@FreeBSD.org> |
qlxgbe: avoid NULL deref in error case Reported by: Dr Silvio Cesare of InfoSect MFC after: 3 days Sponsored by: The FreeBSD Foundation
|
#
971e53c9 |
|
29-Mar-2018 |
David C Somayajulu <davidcs@FreeBSD.org> |
1. Add additional debug prints. 2. Break transmit when IFF_DRV_RUNNING is OFF. 3. set desc_count=0 for default case in switch in ql_rcv_isr() MFC after:5 days
|
#
b65c0c07 |
|
22-Feb-2018 |
David C Somayajulu <davidcs@FreeBSD.org> |
1. Added support to offline a port if is error recovery on successful. 2. Sysctls to enable/disable driver_state_dump and error_recovery. 3. Sysctl to control the delay between hw/fw reinitialization and restarting the fastpath. 4. Stop periodic stats retrieval if interface has IFF_DRV_RUNNING flag off. 5. Print contents of PEG_HALT_STATUS1 and PEG_HALT_STATUS2 on heartbeat failure. 6. Speed up slowpath shutdown during error recovery. 7. link_state update using atomic_store. 8. Added timestamp information on driver state and minidump captures. 9. Added support for Slowpath event logging 10.Added additional failure injection types to simulate failures.
|
#
718cf2cc |
|
27-Nov-2017 |
Pedro F. Giffuni <pfg@FreeBSD.org> |
sys/dev: further adoption of SPDX licensing ID tags. Mainly focus on files that use BSD 2-Clause license, however the tool I was using misidentified many licenses so this was mostly a manual - error prone - task. The Software Package Data Exchange (SPDX) group provides a specification to make it easier for automated tools to detect and summarize well known opensource licenses. We are gradually adopting the specification, noting that the tags are considered only advisory and do not, in any way, superceed or replace the license texts.
|
#
7fb51846 |
|
21-Aug-2017 |
David C Somayajulu <davidcs@FreeBSD.org> |
Upgrade FW to 5.4.66 sysctls to display stats, stats polled every 2 seconds Modify QLA_LOCK()/QLA_UNLOCK() to not sleep after acquiring mtx_lock Add support to turn OFF/ON error recovery following heartbeat failure for debug purposes. Set default max values to 32 Tx/Rx/SDS rings MFC after:5 days
|
#
77d57b28 |
|
08-May-2017 |
David C Somayajulu <davidcs@FreeBSD.org> |
Fix bug where MTX_DEF lock was held while taskqueue_drain() was invoked. Check IFF_DRV_RUNNING flag is set prior to calling ql_hw_set_multi() MFC after:3 days
|
#
a7c62c11 |
|
30-Mar-2017 |
David C Somayajulu <davidcs@FreeBSD.org> |
Add support for optional Soft LRO MFC after:5 days
|
#
b89f2279 |
|
24-Jan-2017 |
David C Somayajulu <davidcs@FreeBSD.org> |
Added support for if_transmit and if_qflush Removed if_start updated version to 3.10.33 MFC after:5 days
|
#
00caeec7 |
|
16-Aug-2016 |
David C Somayajulu <davidcs@FreeBSD.org> |
Add support for set/get cam search mode MFC after: 5 days
|
#
6a62bec0 |
|
16-Aug-2016 |
David C Somayajulu <davidcs@FreeBSD.org> |
Upgrade fw, bootloader and minidump template to version 5.4.58 Add minidump retrieval code MFC after: 5 days
|
#
36ad8372 |
|
06-Jun-2016 |
Sepherosa Ziehau <sephe@FreeBSD.org> |
net: Use M_HASHTYPE_OPAQUE_HASH if the mbuf flowid has hash properties Reviewed by: hps, erj, tuexen Sponsored by: Microsoft OSTC Differential Revision: https://reviews.freebsd.org/D6688
|
#
35291c22 |
|
23-Jun-2015 |
David C Somayajulu <davidcs@FreeBSD.org> |
Updated Copyright information Added support for the following: - iSCSI TLV (requires 64 Tx and 32 Rx rings - 9K receive buffers for jumbo frames (feature may be enabled/disabled) - builtin firmware, bootloader and minidump template - quick stats - async event handling for SFP insertion/removal and DCBX changes - Configuring DCBX and interrupt coalescing parameters
|
#
c2529042 |
|
01-Dec-2014 |
Hans Petter Selasky <hselasky@FreeBSD.org> |
Start process of removing the use of the deprecated "M_FLOWID" flag from the FreeBSD network code. The flag is still kept around in the "sys/mbuf.h" header file, but does no longer have any users. Instead the "m_pkthdr.rsstype" field in the mbuf structure is now used to decide the meaning of the "m_pkthdr.flowid" field. To modify the "m_pkthdr.rsstype" field please use the existing "M_HASHTYPE_XXX" macros as defined in the "sys/mbuf.h" header file. This patch introduces new behaviour in the transmit direction. Previously network drivers checked if "M_FLOWID" was set in "m_flags" before using the "m_pkthdr.flowid" field. This check has now now been replaced by checking if "M_HASHTYPE_GET(m)" is different from "M_HASHTYPE_NONE". In the future more hashtypes will be added, for example hashtypes for hardware dedicated flows. "M_HASHTYPE_OPAQUE" indicates that the "m_pkthdr.flowid" value is valid and has no particular type. This change removes the need for an "if" statement in TCP transmit code checking for the presence of a valid flowid value. The "if" statement mentioned above is now a direct variable assignment which is then later checked by the respective network drivers like before. Additional notes: - The SCTP code changes will be committed as a separate patch. - Removal of the "M_FLOWID" flag will also be done separately. - The FreeBSD version has been bumped. MFC after: 1 month Sponsored by: Mellanox Technologies
|
#
c8dfaf38 |
|
18-Sep-2014 |
Gleb Smirnoff <glebius@FreeBSD.org> |
Mechanically convert to if_inc_counter().
|
#
86e92a9c |
|
10-Jun-2013 |
David C Somayajulu <davidcs@FreeBSD.org> |
There is a one-to-one correspondence between the MSI-X vector # and the Status Descriptor Ring Index. Hence there is no need to check the Interrupt Source Register. Approved by: George Neville-Neil
|
#
f10a77bb |
|
15-May-2013 |
David C Somayajulu <davidcs@FreeBSD.org> |
Add Qlogic 10Gigabit Ethernet & CNA Adapter Driver Version 3.10.10 for QLogic 8300 Series Adapters Submitted by: David C Somayajulu (davidcs@freebsd.org) QLogic Corporation Approved by: George Neville-Neil (gnn@freebsd.org)
|