new-bus: Remove the 'rid' and 'type' arguments from BUS_RELEASE_RESOURCE

The public bus_release_resource() API still accepts both forms, but
the internal kobj method no longer passes the arguments.
Implementations which need the rid or type now use rman_get_rid() or
rman_get_type() to fetch the value from the allocated resource.

Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D44131

new-bus: Remove the 'rid' and 'type' arguments from BUS_*ACTIVATE_RESOURCE

The public bus_activate/deactivate_resource() API still accepts both
forms, but the internal kobj methods no longer pass the arguments.
Implementations which need the rid or type now use rman_get_rid() or
rman_get_type() to fetch the value from the allocated resource.

Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D44130

new-bus: Remove the 'type' argument from BUS_ADJUST_RESOURCE

The public bus_adjust_resource() API still accepts both forms, but the
internal kobj method no longer passes the argument. Implementations
which need the type now use rman_get_type() to fetch the value from
the allocated resource.

Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D44128

sys: Set the type of allocated bus resources

Use rman_set_type to set the type of allocated resources everywhere
rman_set_rid is currently called.

Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D44123

pcib: Add helper routines for [de]activating PCI_RES_BUS resources

Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D43427

pci_cfgreg: Add a PCI domain argument to the low-level register API

This commit changes the API of pci_cfgreg(read|write) to add a domain
argument (referred to as a segment in ACPI parlance) (note that this
is not the same as a NUMA domain, but something PCI-specific). This
does not yet enable access to domains other than 0, but updates the
API to support domains.

Places that use hard-coded bus/slot/function addresses have been
updated to hardcode a domain of 0. A few places that have the PCI
domain (segment) available such as the acpi_pcib_acpi.c Host-PCI
bridge driver pass the PCI domain.

The hpt27xx(4) and hptnr(4) drivers fail to attach to a device not on
domain 0 since they provide APIs to their binary blobs that only
permit bus/slot/function addressing.

The x86 non-ACPI PCI bus drivers all hardcode a domain of 0 as they do
not support multiple domains.

Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D42827

sys: Remove $FreeBSD$: one-line .c pattern

Remove /^[\s*]*__FBSDID\("\$FreeBSD\$"\);?\s*\n/

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.

Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix

sys/dev: further adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.

"Buses" is the preferred plural of "bus"

Replace archaic "busses" with modern form "buses."

Intentionally excluded:
* Old/random drivers I didn't recognize
* Old hardware in general
* Use of "busses" in code as identifiers

No functional change.

http://grammarist.com/spelling/buses-busses/

PR: 216099
Reported by: bltsrc at mail.ru
Sponsored by: Dell EMC Isilon

Use uintmax_t (typedef'd to rman_res_t type) for rman ranges.

On some architectures, u_long isn't large enough for resource definitions.
Particularly, powerpc and arm allow 36-bit (or larger) physical addresses, but
type `long' is only 32-bit. This extends rman's resources to uintmax_t. With
this change, any resource can feasibly be placed anywhere in physical memory
(within the constraints of the driver).

Why uintmax_t and not something machine dependent, or uint64_t? Though it's
possible for uintmax_t to grow, it's highly unlikely it will become 128-bit on
32-bit architectures. 64-bit architectures should have plenty of RAM to absorb
the increase on resource sizes if and when this occurs, and the number of
resources on memory-constrained systems should be sufficiently small as to not
pose a drastic overhead. That being said, uintmax_t was chosen for source
clarity. If it's specified as uint64_t, all printf()-like calls would either
need casts to uintmax_t, or be littered with PRI*64 macros. Casts to uintmax_t
aren't horrible, but it would also bake into the API for
resource_list_print_type() either a hidden assumption that entries get cast to
uintmax_t for printing, or these calls would need the PRI*64 macros. Since
source code is meant to be read more often than written, I chose the clearest
path of simply using uintmax_t.

Tested on a PowerPC p5020-based board, which places all device resources in
0xfxxxxxxxx, and has 8GB RAM.
Regression tested on qemu-system-i386
Regression tested on qemu-system-mips (malta profile)

Tested PAE and devinfo on virtualbox (live CD)

Special thanks to bz for his testing on ARM.

Reviewed By: bz, jhb (previous)
Relnotes: Yes
Sponsored by: Alex Perez/Inertial Computing
Differential Revision: https://reviews.freebsd.org/D4544

Convert rman to use rman_res_t instead of u_long

Summary:
Migrate to using the semi-opaque type rman_res_t to specify rman resources. For
now, this is still compatible with u_long.

This is step one in migrating rman to use uintmax_t for resources instead of
u_long.

Going forward, this could feasibly be used to specify architecture-specific
definitions of resource ranges, rather than baking a specific integer type into
the API.

This change has been broken out to facilitate MFC'ing drivers back to 10 without
breaking ABI.

Reviewed By: jhb
Sponsored by: Alex Perez/Inertial Computing
Differential Revision: https://reviews.freebsd.org/D5075

Reassign copyright statements on several files from Advanced
Computing Technologies LLC to Hudson River Trading LLC.

Approved by: Hudson River Trading LLC (who owns ACT LLC)
MFC after: 1 week

Add support for managing PCI bus numbers. As with BARs and PCI-PCI bridge
I/O windows, the default is to preserve the firmware-assigned resources.
PCI bus numbers are only managed if NEW_PCIB is enabled and the architecture
defines a PCI_RES_BUS resource type.
- Add a helper API to create top-level PCI bus resource managers for each
PCI domain/segment. Host-PCI bridge drivers use this API to allocate
bus numbers from their associated domain.
- Change the PCI bus and CardBus drivers to allocate a bus resource for
their bus number from the parent PCI bridge device.
- Change the PCI-PCI and PCI-CardBus bridge drivers to allocate the
full range of bus numbers from secbus to subbus from their parent bridge.
The drivers also always program their primary bus register. The bridge
drivers also support growing their bus range by extending the bus resource
and updating subbus to match the larger range.
- Add support for managing PCI bus resources to the Host-PCI bridge drivers
used for amd64 and i386 (acpi_pcib, mptable_pcib, legacy_pcib, and qpi_pcib).
- Define a PCI_RES_BUS resource type for amd64 and i386.

Reviewed by: imp
MFC after: 1 month

Fix a typo.

Respect the BIOS/firmware's notion of acceptable address ranges for PCI
resource allocation on x86 platforms:
- Add a new helper API that Host-PCI bridge drivers can use to restrict
resource allocation requests to a set of address ranges for different
resource types.
- For the ACPI Host-PCI bridge driver, use Producer address range resources
in _CRS to enumerate valid address ranges for a given Host-PCI bridge.
This can be disabled by including "hostres" in the debug.acpi.disabled
tunable.
- For the MPTable Host-PCI bridge driver, use entries in the extended
MPTable to determine the valid address ranges for a given Host-PCI
bridge. This required adding code to parse extended table entries.

Similar to the new PCI-PCI bridge driver, these changes are only enabled
if the NEW_PCIB kernel option is enabled (which is enabled by default on
amd64 and i386).

Approved by: re (kib)

Split out host_pcib_get_busno() from the generic PCI-PCI bridge driver to
start a new file that will hold utility APIs used by various Host-PCI
bridge drivers and drivers that provide PCI domains.