sys: Remove $FreeBSD$: two-line .h pattern

Remove /^\s*\*\n \*\s+\$FreeBSD\$$\n/

mlx5: Remove unused debugfs node pointers.

No functional change intended.

MFC after: 1 week
Sponsored by: NVIDIA Networking

Mechanically convert mlx5en(4) to IfAPI

Reviewed by: zlei
Sponsored by: Juniper Networks, Inc.
Differential Revision: https://reviews.freebsd.org/D38595

mlx5: Add raw ethernet local loopback support.

Currently, unicast/multicast loopback raw ethernet (non-RDMA) packets
are sent back to the vport. A unicast loopback packet is the packet
with destination MAC address the same as the source MAC address. For
multicast, the destination MAC address is in the vport's multicast
filter list.

Moreover, the local loopback is not needed if there is one or none
user space context.

After this patch, the raw ethernet unicast and multicast local
loopback are disabled by default. When there is more than one user
space context, the local loopback is enabled.

Note that when local loopback is disabled, raw ethernet packets are
not looped back to the vport and are forwarded to the next routing
level (eswitch, or multihost switch, or out to the wire depending on
the configuration).

Linux commits:
c85023e153e3824661d07307138fdeff41f6d86a
8978cc921fc7fad3f4d6f91f1da01352aeeeff25

MFC after: 1 week
Sponsored by: NVIDIA Networking

ibcore: Kernel space update based on Linux 5.7-rc1.

Overview:

This is the first stage of a RDMA stack upgrade introducing kernel
changes only based on Linux 5.7-rc1.

This patch is based on about four main areas of work:
- Update of the IB uobjects system:
- The memory holding so-called AH, CQ, PD, SRQ and UCONTEXT objects
is now managed by ibcore. This also require some changes in the
kernel verbs API. The updated verbs changes are typically about
initialize and deinitialize objects, and remove allocation and
free of memory.

- Update of the uverbs IOCTL framework:
- The parsing and handling of user-space commands has been
completely refactored to integrate with the updated IB uobjects
system.

- Various changes and updates to the generic uverbs interfaces in
device drivers including the new uAPI surface.

- The mlx5_ib_devx.c in mlx5ib and related mlx5 core changes.

Dependencies:

- The mlx4ib driver code has been updated with the minimum changes
needed.

- The mlx5ib driver code has been updated with the minimum changes
needed including DV support.

Compatibility:

- All user-space facing APIs are backwards compatible after this
change.

- All kernel-space facing RDMA APIs are backwards compatible after
this change, with exception of ib_create_ah() and ib_destroy_ah()
which takes a new flag.

- The "ib_device_ops" structure exist, but only contains the driver ID
and some structure sizes.

Differences from Linux:

- Infiniband drivers must use the INIT_IB_DEVICE_OPS() macro to set
the sizes needed for allocating various IB objects, when adding
IB device instances.

Security:

- PRIV_NET_RAW is needed to use raw ethernet transmit features.
- PRIV_DRIVER is needed to use other privileged operations.

Based on upstream Linux, Torvalds (5.7-rc1):
8632e9b5645bbc2331d21d892b0d6961c1a08429

MFC after: 1 week
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D31149
Sponsored by: NVIDIA Networking

mlx5ib: Implement support for enabling and disabling RoCE ECN.

RoCE is short for Remote direct memory access over Converged Ethernet.
ECN is short for Explicit Congestion Notification.

MFC after: 1 week
Reviewed by: kib
Sponsored by: Mellanox Technologies // NVIDIA Networking

mlx5ib: Extend parameter macros so that more arguments may be added.

MFC after: 1 week
Reviewed by: kib
Sponsored by: Mellanox Technologies // NVIDIA Networking

ibcore: Declare ib_post_send() and ib_post_recv() arguments const

Since neither ib_post_send() nor ib_post_recv() modify the data structure
their second argument points at, declare that argument const. This change
makes it necessary to declare the 'bad_wr' argument const too and also to
modify all ULPs that call ib_post_send(), ib_post_recv() or
ib_post_srq_recv(). This patch does not change any functionality but makes
it possible for the compiler to verify whether the
ib_post_(send|recv|srq_recv) really do not modify the posted work request.

Linux commit:
f696bf6d64b195b83ca1bdb7cd33c999c9dcf514
7bb1fafc2f163ad03a2007295bb2f57cfdbfb630
d34ac5cd3a73aacd11009c4fc3ba15d7ea62c411

MFC after: 1 week
Reviewed by: kib
Sponsored by: Mellanox Technologies // NVIDIA Networking

mlx5ib: Fix XRC QP support after introducing extended atomic.

Extended atomics are supported with RC and XRC QP types, but Linux commit
a60109dc9a95 added an unneeded check to to_mlx5_access_flags().
This broke XRC QPs.

The following ib_atomic_bw invocation over XRC reproduces the issue:
ib_atomic_bw -d mlx5_1 --connection=XRC --atomic_type=FETCH_AND_ADD

It is safe to remove such checks because the QP type was already checked
in ib_modify_qp_is_ok(), which was previously called from
mlx5_ib_modify_qp().

Linux commit:
13f8d9c16693afb908ead3d2a758adbe6a79eccd

MFC after: 1 week
Reviewed by: kib
Sponsored by: Mellanox Technologies // NVIDIA Networking

mlx5ib: Limit mkey page size to 2GB

The maximum page size in the mkey context is 2GB.

Until today, we didn't enforce this requirement in the code, and therefore,
if we got a page size larger than 2GB, we have passed zeros in the
log_page_shift instead of the actual value and the registration failed.

This patch limits the driver to use compound pages of 2GB for mkeys.

Linux commit:
762f899ae7875554284af92b821be8c083227092

MFC after: 1 week
Reviewed by: kib
Sponsored by: Mellanox Technologies // NVIDIA Networking

mlx5: remove dependency on ifnet specifics of linux/netdevice.h

Rename the last remaining bits depending on ifnet from linux/netdevice.h
instead of using the compat macros. This helps clearing up
struct netdevice being struct ifnet from linux/netdevice.h.

Sponsored-by: The FreeBSD Foundation
MFC-after: 2 weeks
Reviewed-by: hselasky, kib
X-D-R: D29366
Differential Revision: https://reviews.freebsd.org/D29497

Update user access region, UAR, APIs in the core in mlx5core.

This change include several changes as listed below all related to UAR.
UAR is a special PCI memory area where the so-called doorbell register and
blue flame register live. Blue flame is a feature for sending small packets
more efficiently via a PCI memory page, instead of using PCI DMA.

- All structures and functions named xxx_uuars were renamed into xxx_bfreg.
- Remove partially implemented Blueflame support from mlx5en(4) and mlx5ib.
- Implement blue flame register allocator.
- Use blue flame register allocator in mlx5ib.
- A common UAR page is now allocated by the core to support doorbell register
writes for all of mlx5en and mlx5ib, instead of allocating one UAR per
sendqueue.
- Add support for DEVX query UAR.
- Add support for 4K UAR for libmlx5.

Linux commits:
7c043e908a74ae0a935037cdd984d0cb89b2b970
2f5ff26478adaff5ed9b7ad4079d6a710b5f27e7
0b80c14f009758cefeed0edff4f9141957964211
30aa60b3bd12bd79b5324b7b595bd3446ab24b52
5fe9dec0d045437e48f112b8fa705197bd7bc3c0
0118717583cda6f4f36092853ad0345e8150b286
a6d51b68611e98f05042ada662aed5dbe3279c1e

MFC after: 1 week
Sponsored by: Mellanox Technologies // NVIDIA Networking

Make mlx5_cmd_exec_cb() a safe API in mlx5core.

APIs that have deferred callbacks should have some kind of cleanup
function that callers can use to fence the callbacks. Otherwise things
like module unloading can lead to dangling function pointers, or worse.

The IB MR code is the only place that calls this function and had a
really poor attempt at creating this fence. Provide a good version in
the core code as future patches will add more places that need this
fence.

Linux commit:
e355477ed9e4f401e3931043df97325d38552d54

MFC after: 1 week
Sponsored by: Mellanox Technologies // NVIDIA Networking

Fix broken MLX5_IB_INDEX() macro in mlx5ib(4).

The index should be computed as distance from arg[0] and not
the beginning of struct mlx5_ib_congestion .

While at it fix a use of zero length array to avoid depending
on undefined compiler behaviour.

MFC after: 1 week
Sponsored by: Mellanox Technologies

Update warning and error print formats in mlx5ib.

Submitted by: slavash@
MFC after: 3 days
Sponsored by: Mellanox Technologies

Implement support for Differentiated Service Code Point, DSCP, in mlx5en(4).

The DSCP feature is controlled using a set of sysctl(8) fields under
the qos sysctl directory entry for mlx5en(4).

For Routable RoCE QPs, the DSCP should be set in the QP's address path.
The DSCP's value is derived from the traffic class.

Linux commit:
ed88451e1f2d400fd6a743d0a481631cf9f97550

MFC after: 1 week
Sponsored by: Mellanox Technologies

Add support for explicit congestion notification, ECN, to mlx5ib(4).

ECN configuration and statistics is available through a set of sysctl(8)
nodes under sys.class.infiniband.mlx5_X.cong . The ECN configuration
nodes can also be used as loader tunables.

MFC after: 1 week
Sponsored by: Mellanox Technologies

Optimize ibcore RoCE address handle creation from user-space.

Creating a UD address handle from user-space or from the kernel-space,
when the link layer is ethernet, requires resolving the remote L3
address into a L2 address. Doing this from the kernel is easy because
the required ARP(IPv4) and ND6(IPv6) address resolving APIs are readily
available. In userspace such an interface does not exist and kernel
help is required.

It should be noted that in an IP-based GID environment, the GID itself
does not contain all the information needed to resolve the destination
IP address. For example information like VLAN ID and SCOPE ID, is not
part of the GID and must be fetched from the GID attributes. Therefore
a source GID should always be referred to as a GID index. Instead of
going through various racy steps to obtain information about the
GID attributes from user-space, this is now all done by the kernel.

This patch optimises the L3 to L2 address resolving using the existing
create address handle uverbs interface, retrieving back the L2 address
as an additional user-space information structure.

This commit combines the following Linux upstream commits:

IB/core: Let create_ah return extended response to user
IB/core: Change ib_resolve_eth_dmac to use it in create AH
IB/mlx5: Make create/destroy_ah available to userspace
IB/mlx5: Use kernel driver to help userspace create ah
IB/mlx5: Report that device has udata response in create_ah

MFC after: 1 week
Sponsored by: Mellanox Technologies

Update mlx5ib(4) to match Linux 4.9 and the new ibcore APIs.

Sponsored by: Mellanox Technologies

Add new mlx5ib(4) driver to the kernel source tree which supports
Remote DMA over Converged Ethernet, RoCE, for the ConnectX-4 series of
PCI express network cards.

There is currently no user-space support and this driver only supports
kernel side non-routable RoCE V1. The krping kernel module can be used
to test this driver. Full user-space support including RoCE V2 will be
added as part of the ongoing upgrade to ibcore from Linux 4.9. Otherwise
this driver is feature equivalent to mlx4ib(4). The mlx5ib(4) kernel
module will only be built when WITH_OFED=YES is specified.

MFC after: 2 weeks
Sponsored by: Mellanox Technologies