sys: Remove $FreeBSD$: two-line .h pattern

Remove /^\s*\*\n \*\s+\$FreeBSD\$$\n/

mlx5: Implement mlx5_nic_vport_update_local_lb()

MFC after: 1 week
Sponsored by: NVIDIA Networking

mlx5: idiomatic use of preprocessor, in particular paths

MFC after: 1 week
Sponsored by: NVIDIA Networking

mlx5: normalize use of the opt_*.h files

MFC after: 1 week
Sponsored by: NVIDIA Networking

mlx5en: Fix for inlining issues in transmit path

1) Don't exceed the drivers own hardcoded TX inline limit.

The blueflame register size can be much greater than the hardcoded limit
for inlining. Make sure we don't exceed the drivers own limit, because this
also means that the maximum number of TX fragments becomes invalid and
then memory size assumptions in the TX path no longer hold up.

2) Make sure the mlx5_query_min_inline() function returns an error code.

3) Header inlining is required when using TSO.

4) Catch failure to compute inline header size for TSO.

5) Add support for UDP when computing inline header size.

6) Fix for inlining issues with regards to DSCP.

Make sure we inline 4 bytes beyond the ethernet and/or
VLAN header to workaround a hardware bug extracting
the DSCP field from the IPv4/v6 header.

Submitted by: hselasky@
Approved by: hselasky (mentor)
MFC after: 1 week
Sponsored by: Mellanox Technologies

mlx5: Fix for potential memory leaks.

Make sure allocated data gets freed in error cases.

Submitted by: hselasky@
Approved by: hselasky (mentor)
MFC after: 1 week
Sponsored by: Mellanox Technologies

Do not inline transmit headers and use HW VLAN tagging if supported by mlx5en(4).

Query the minimal inline mode supported by the card.
When creating a send queue, cache the queried mode and optimize the transmit
if no inlining is required. In this case, we can avoid touching the headers
cache line and avoid dirtying several more lines by copying headers into
the send WQEs. Also, if no inline headers are used, hardware assists in
the VLAN tag framing.

Submitted by: kib@, slavash@
MFC after: 1 week
Sponsored by: Mellanox Technologies

Use the autogenerated interface file for all commands in mlx5core.

This patch accumulates the following Linux commits:
- 90b3e38d048f09b22fb50bcd460cea65fd00b2d7
mlx5_core: Modify CQ moderation parameters
- 09a7d9eca1a6cf5eb4f9abfdf8914db9dbd96f08
mlx5_core: QP/XRCD commands via mlx5 ifc
- 1a412fb1caa2c1b77719ccb5ed8b0c3c2bc65da7
mlx5_core: Modify QP commands via mlx5 ifc
- ec22eb53106be1472ba6573dc900943f52f8fd1e
mlx5_core: MKey/PSV commands via mlx5 ifc
- 73b626c182dff06867ceba996a819e8372c9b2ce
mlx5_core: EQ commands via mlx5 ifc
- 20ed51c643b6296789a48adc3bc2cc875a1612cf
mlx5_core: Access register and MAD IFC commands via mlx5 ifc
- a533ed5e179cd15512d40282617909d3482a771c
mlx5_core: Pages management commands via mlx5 ifc
- b8a4ddb2e8f44f872fb93bbda2d541b27079fd2b
mlx5_core: Add MLX5_ARRAY_SET64 to fix BUILD_BUG_ON
- af1ba291c5e498973cc325c501dd8da80b234571
mlx5_core: Refactor internal SRQ API
- b06e7de8a9d8d1d540ec122bbdf2face2a211634
mlx5_core: Refactor device capability function
- c4f287c4a6ac489c18afc4acc4353141a8c53070
mlx5_core: Unify and improve command interface

Submitted by: Matthew Finlay <matt@mellanox.com>
MFC after: 1 week
Sponsored by: Mellanox Technologies

Add API function to query port performance counters for infiniband and RoCE
traffic in mlx5 core.

Sponsored by: Mellanox Technologies
MFC after: 1 week

Add API functions to query and modify local loopback of multicast and
unicast traffic in mlx5 core.

Sponsored by: Mellanox Technologies
MFC after: 1 week

Add API function to query virtual port counters in mlx5 core.

Sponsored by: Mellanox Technologies
MFC after: 1 week

Update the MLX5 core module:
- Add new firmware commands and update existing ones.
- Add more firmware related structures and update existing ones.
- Some minor fixes, like adding missing \n to some prints.

Sponsored by: Mellanox Technologies
MFC after: 1 week

Use correct Q-counter output array.

Sponsored by: Mellanox Technologies
Approved by: re (kib)
MFC after: 3 days

Add SR-IOV guest support to the mlx5en driver.

This patch adds the missing pieces needed for device setup using the
mlx5en driver inside a virtual machine which is providing hardware
access through SR-IOV.

Sponsored by: Mellanox Technologies
MFC after: 1 week

Update the mlx5 shared driver code to the latest version, which
include the following list of changes:

- Added eswitch ACL table management
Introduce API for managing ACL table.
This API include the following features:
1) vlan filter - for VST/VGT+ support.
2) spoofcheck.
3) robust functionality to allow/drop general untagged/tagged traffic.
4) support for both ingress and egress ACL types.

- Added loopback filter to the vacl table.

- Added multicast list set in the vPort context

- Added promiscuous mode set in the vPort context

- Set the vlan list in vPort context
1) Check caps if VLAN list is not longer than FW supports
2) Set MODIFY_NIC_VPORT_CONTEXT command

- Changed MLX5_EEPROM_MAX_BYTES from 48 to 32 so that a single EEPROM
reading cannot cross the 128-byte boundary. Previously reading the
MCIA register was done in batches of 48 bytes. The third reading
would then by-pass the 127th byte, which means that part of the low
page and part of the high page would be read at the same time, which
created a bug:
1st: 0-47 bytes
2nd: 48-95 bytes
3rd: 96-143 bytes

MFC after: 1 week
Sponsored by: Mellanox Technologies
Differential Revision: https://reviews.freebsd.org/D4411

Add mlx5 and mlx5en driver(s) for ConnectX-4 and ConnectX-4LX cards
from Mellanox Technologies. The current driver supports ethernet
speeds up to and including 100 GBit/s. Infiniband support will be
done later.

The code added is not compiled by default, which will be done by a
separate commit.

Sponsored by: Mellanox Technologies
MFC after: 2 weeks