sys: Automated cleanup of cdefs and other formatting

Apply the following automated changes to try to eliminate
no-longer-needed sys/cdefs.h includes as well as now-empty
blank lines in a row.

Remove /^#if.*\n#endif.*\n#include\s+<sys/cdefs.h>.*\n/
Remove /\n+#include\s+<sys/cdefs.h>.*\n+#if.*\n#endif.*\n+/
Remove /\n+#if.*\n#endif.*\n+/
Remove /^#if.*\n#endif.*\n/
Remove /\n+#include\s+<sys/cdefs.h>\n#include\s+<sys/types.h>/
Remove /\n+#include\s+<sys/cdefs.h>\n#include\s+<sys/param.h>/
Remove /\n+#include\s+<sys/cdefs.h>\n#include\s+<sys/capsicum.h>/

Sponsored by: Netflix

sys: Remove ancient SCCS tags.

Remove ancient SCCS tags from the tree, automated scripting, with two
minor fixup to keep things compiling. All the common forms in the tree
were removed with a perl script.

Sponsored by: Netflix

sys: Remove $FreeBSD$: one-line .c pattern

Remove /^[\s*]*__FBSDID\("\$FreeBSD\$"\);?\s*\n/

spdx: The BSD-2-Clause-NetBSD identifier is obsolete, drop -NetBSD

The SPDX folks have obsoleted the BSD-2-Clause-NetBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.

Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix

le: Remove unused devclass arguments to DRIVER_MODULE.

sys/dev: further adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.

Update NetBSD Foundation copyrights to 2-clause BSD

The NetBSD Foundation states "Third parties are encouraged to change the
license on any files which have a 4-clause license contributed to the
NetBSD Foundation to a 2-clause license."

This change removes clauses 3 and 4 from copyright / license blocks that
list The NetBSD Foundation as the only copyright holder.

Sponsored by: The FreeBSD Foundation

Use convenience functions where possible instead of accessing the PCI
configuration registers directly.

Remove pci_enable_io calls where they are redundant. The PCI bus driver
will set the right bits when the corresponding bus resource is activated.

Remove redundant pci_* function calls from suspend/resume methods. The
bus driver already saves and restores the PCI configuration.

Reviewed by: jhb
Approved by: kib (mentor)

Use SYS_RES_IOPORT instead of PCIM_CMD_PORTEN when calling pci_enable_io.

Approved by: kib (mentor)

A new jail(8) with a configuration file, to replace the work currently done
by /etc/rc.d/jail.

- Import the HEAD csup code which is the basis for the cvsmode work.

- Use bus_{read,write}_*(9) instead of bus_space_{read,write}_*(9) etc
and take advantage of rman_get_rid(9) in order to save some softc
members.
- Provide and consume module dependency information for lebuffer(4).

o break newbus api: add a new argument of type driver_filter_t to
bus_setup_intr()

o add an int return code to all fast handlers

o retire INTR_FAST/IH_FAST

For more info: http://docs.freebsd.org/cgi/getmsg.cgi?fetch=465712+0+current/freebsd-current

Reviewed by: many
Approved by: re@

Remove BUS_DMA_WAITOK from bus_dma_tag_create() invocations as it's
no valid flag there.

Use bus_get_dma_tag() to obtain the parent DMA tag so le(4) works on
platforms requiring this.

Revert the part of rev. 1.3 which changed the software style to be
set to ILACC rather than PCnet-PCI as VMware doesn't implement ILACC
compatibility, resulting in the VMware virtual machine to crash if
enabled. Add a comment regarding usage of ILACC vs. PCnet-PCI mode.

Reported and tested by: gnn, wsalamon

- Revert if_le_pci.c rev. 1.2; although lnc(4) is now gone, le_pci_probe()
still should return BUS_PROBE_LOW_PRIORITY instead of BUS_PROBE_DEFAULT
in order to give pcn(4) a chance to attach in case it probes after le(4).
- Rearrange the code related to RX interrupt handling so that ownership of
RX descriptors is immediately returned to the NIC after we have copied
the data of the hardware, allowing the NIC to already reuse the descriptor
while we are processing the data in ifp->if_input(). This results in a
small but measurable increase in RX throughput.
As a side-effect, this moves the workaround for the LANCE revision C bug
to am7900.c (still off by default as I doubt we will actually encounter
such an old chip in a machine running FreeBSD) and the workaround for the
bug in the VMware PCnet-PCI emulation to am79000.c, which is now also
only compiled on i386 (resulting in a small increase in RX throughput on
the other platforms).
- Change the RX interrupt handlers so that the descriptor error bits are
only check once in case there was no error instead of twice (inspired
by the NetBSD pcn(4), which additionally predicts the error branch as
false).
- Fix the debugging output of the RX and TX interrupt handlers; while
looping through the descriptors print info about the currently processed
one instead of always the previously last used one; remove pointless
printing of info about the RX descriptor bits after their values were
reset.
- Create the DMA tags used to allocate the memory for the init block,
descriptors and packet buffers with the alignment the respective NIC
actually requires rather than using PAGE_SIZE unconditionally. This might
as well fix the alignment of the memory as it seems we do not inherit
the alignment constraint from the parent DMA tag.
- For the PCI variants double the number of RX descriptors and buffers
from 8 to 16 as this minimizes the number of RX overflows im seeing with
one NIC-mainboard combination. Nevertheless move reporting of overflows
under debugging as they seem unavoidable with some crappy hardware.
- Set the software style of the PCI variants to ILACC rather than PCnet-PCI
as the former is was am79000.c actually implements. Should not make a
difference for this driver though.
- Fix the driver name part in the MODULE_DEPEND of the PCI front-end for
ether.
- Use different device descriptions for PCnet-Home and PCnet-PCI.
- Fix some 0/NULL confusion in lance_get().
- Use bus_addr_t for sc_addr and bus_size_t for sc_memsize as these are
more appropriate than u_long for these.
- Remove the unused LE_DRIVER_NAME macro.
- Add a comment describing why we are taking the LE_HTOLE* etc approach
instead of using byteorder(9) functions directly.
- Improve some comments and fix some wording.

MFC after: 2 weeks

Kill more references to lnc(4).

Submitted by: grep(1)

Add le(4), a driver for AMD Am7900 LANCE and Am79C9xx PCnet NICs ported
from NetBSD. This driver actually can replace lnc(4). Advantages over
lnc(4) are:
- Cleaner and more flexible regarding MD needs.
- Endian-clean and MPSAFE.
- Supports ALTQ, VLAN_MTU, ifmedia.
- Uses 32bit DMA for the PCI variants.

This commit includes front-ends for the dma(4) pseudo-bus found on SBus-
based sparc64 machines (thus supports the on-board LANCE in Sun Ultra 1)
and PCI. In order to actually replace lnc(4), the front-ends for ISA and
the PC98 CBUS would have to be added but for which I don't have hardware
to test.

Reviewed and some improvements by: yongari
Tested on: i386, sparc64