ice(4): Update copyright year to 2024

Signed-off-by: Eric Joyner <erj@FreeBSD.org>

MFC after: 3 days
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D44003

ice(4): Update to 1.38.16-k

New features
- Add sysctl "link_active_on_if_down" (defaults to 1 to match previous
behavior): set this to 0 to have the driver bring the physical link down when
the interface is brought administratively down
- Add sysctl "temp" to read chip temperature on E810 devices; this requires a
4.30 or newer NVM (see package sysutils/intel-nvmupdate-100g)

Bug fixes and general changes
- (linked to irdma) properly propagate PF reset request from irdma driver
- (linked to irdma) properly notify irdma of an impending PF reset
- (linked to irdma) move Protocol Engine error handling to irdma
- Print log message when using a DDP that doesn't support the "TX balancing"
mode
- Block LLDP agent configuration when DSCP QoS mode is enabled
- Fix kernel panic when updating NVM when adapter is in the "TX balancing" mode
- Remove ice_sbq_cmd.h since it's unused
- Fix LLDP RX filter to still allow LLDP frames to be received by SW after a PF
reset in SW LLDP mode
- Add ice_if_needs_restart handler in order to fix a bad VLAN and link down
interaction
- Issue PF reset during unload
- nvmupdate process fixes
- Use pci_msix_table_bar() to get MSI-X bar index at runtime instead of hardcoding it

Signed-off-by: Eric Joyner <erj@FreeBSD.org>

Reviewed by: anzhu@netapp.com
MFC after: 3 days
Sponsored by: Intel Corporation, NetApp
Differential Revision: https://reviews.freebsd.org/D41655

sys: Remove $FreeBSD$: one-line .c comment pattern

Remove /^/[*/]\s*\$FreeBSD\$.*\n/

ice(4): Update to 1.37.11-k

This driver update has no corresponding ice_ddp update, and doesn't
contain very many functional changes:
- Some refactoring for future SR-IOV PF support
- Various minor fixes

Signed-off-by: Eric Joyner <erj@FreeBSD.org>

Tested by: jeffrey.e.pieper@intel.com
MFC after: 1 week
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D39821

ice(4): Update to 1.37.7-k

Notable changes include:

- DSCP QoS Support (leveraging support added in
rG9c950139051298831ce19d01ea5fb33ec6ea7f89)
- Improved PFC handling and TC queue assignments (now all remaining
queues are assigned to TC 0 when more than one TC is enabled and the
number of available queues does not evenly divide between them)
- Support for dumping the internal FW state for additional debugging by
Intel support
- Support for allowing "No FEC" to be a valid state for the LESM to
negotiate when using non-standard compliant modules

Also includes various bug fixes and smaller enhancements, too.

Signed-off-by: Eric Joyner <erj@FreeBSD.org>

Reviewed by: erj@
Tested by: Jeff Pieper <jeffrey.pieper@intel.com>
MFC after: 3 days
Relnotes: yes
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D38109

ice(4): Update to 1.34.2-k

- Adds FW logging support
- Once enabled, this lets the firmware print event and error messages
to the log, increasing the visibility into what the hardware is
doing; this is useful for debugging
- General bug fixes
- Adds inital DCB support to the driver
- Notably, this adds support for DCBX to the driver; now with the
fw_lldp sysctl set to 1, the driver and adapter will adopt a DCBX
configuration sent from a link partner
- Adds statistcs sysctls for priority flow control frames
- Adds new configuration sysctls for DCB-related features: (VLAN) user
priority to TC mapping; ETS bandwidth allocation; priority flow
control
- Remove unused SR-IOV files (until support gets added)

Signed-off-by: Eric Joyner <erj@FreeBSD.org>

Tested by: jeffrey.e.pieper@intel.com
MFC after: 3 days
MFC with: 213e91399b, e438f0a975
Relnotes: yes
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D34024

ice(4): Update to version 0.28.1-k

This updates the driver to align with the version included in
the "Intel Ethernet Adapter Complete Driver Pack", version 25.6.

There are no major functional changes; this mostly contains
bug fixes and changes to prepare for new features. This version
of the driver uses the previously committed ice_ddp package
1.3.19.0.

Signed-off-by: Eric Joyner <erj@FreeBSD.org>

Tested by: jeffrey.e.pieper@intel.com
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D28640

ice(4): Update to 0.26.16

Summary of changes:

- Assorted bug fixes
- Support for newer versions of the device firmware
- Suspend/resume support
- Support for Lenient Link Mode for E82X devices (e.g. can try to link with
SFP/QSFP modules with bad EEPROMs)
- Adds port-level rx_discards sysctl, similar to ixl(4)'s

This version of the driver is intended to be used with DDP package 1.3.16.0,
which has already been updated in a previous commit.

Tested by: Jeffrey Pieper <jeffrey.e.pieper@intel.com>
MFC after: 3 days
MFC with: r365332, r365550
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D26322

ice(4): Introduce new driver for Intel E800 Ethernet controllers

The ice(4) driver is the driver for the Intel E8xx series Ethernet
controllers; currently with codenames Columbiaville and
Columbia Park.

These new controllers support 100G speeds, as well as introducing
more queues, better virtualization support, and more offload
capabilities. Future work will enable virtual functions (like
in ixl(4)) and the other functionality outlined above.

For full functionality, the kernel should be compiled with
"device ice_ddp" like in the amd64 NOTES file, and/or
ice_ddp_load="YES" should be added to /boot/loader.conf so that
the DDP package file included in this commit can be downloaded
to the adapter. Otherwise, the adapter will fall back to a single
queue mode with limited functionality.

A man page for this driver will be forthcoming.

MFC after: 1 month
Relnotes: yes
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D21959