ssh: Update to OpenSSH 9.4p1

Excerpts from the release notes:

* ssh-agent(1): PKCS#11 modules must now be specified by their full
paths. Previously dlopen(3) could search for them in system
library directories.

* ssh(1): allow forwarding Unix Domain sockets via ssh -W.

* ssh(1): add support for configuration tags to ssh(1).
This adds a ssh_config(5) "Tag" directive and corresponding
"Match tag" predicate that may be used to select blocks of
configuration similar to the pf.conf(5) keywords of the same
name.

* ssh(1): add a "match localnetwork" predicate. This allows matching
on the addresses of available network interfaces and may be used to
vary the effective client configuration based on network location.

* ssh-agent(1): improve isolation between loaded PKCS#11 modules
by running separate ssh-pkcs11-helpers for each loaded provider.

* ssh-agent(1), ssh(1): improve defences against invalid PKCS#11
modules being loaded by checking that the requested module
contains the required symbol before loading it.

* ssh(1): don't incorrectly disable hostname canonicalization when
CanonicalizeHostname=yes and ProxyJump was expicitly set to
"none". bz3567

Full release notes at https://www.openssh.com/txt/release-9.4

Relnotes: Yes
Sponsored by: The FreeBSD Foundation

ssh: Update to OpenSSH 9.3p1

This release fixes a number of security bugs and has minor new
features and bug fixes. Security fixes, from the release notes
(https://www.openssh.com/txt/release-9.3):

This release contains fixes for a security problem and a memory
safety problem. The memory safety problem is not believed to be
exploitable, but we report most network-reachable memory faults as
security bugs.

* ssh-add(1): when adding smartcard keys to ssh-agent(1) with the
per-hop destination constraints (ssh-add -h ...) added in OpenSSH
8.9, a logic error prevented the constraints from being
communicated to the agent. This resulted in the keys being added
without constraints. The common cases of non-smartcard keys and
keys without destination constraints are unaffected. This problem
was reported by Luci Stanescu.

* ssh(1): Portable OpenSSH provides an implementation of the
getrrsetbyname(3) function if the standard library does not
provide it, for use by the VerifyHostKeyDNS feature. A
specifically crafted DNS response could cause this function to
perform an out-of-bounds read of adjacent stack data, but this
condition does not appear to be exploitable beyond denial-of-
service to the ssh(1) client.

The getrrsetbyname(3) replacement is only included if the system's
standard library lacks this function and portable OpenSSH was not
compiled with the ldns library (--with-ldns). getrrsetbyname(3) is
only invoked if using VerifyHostKeyDNS to fetch SSHFP records. This
problem was found by the Coverity static analyzer.

Sponsored by: The FreeBSD Foundation

ssh: update to OpenSSH 9.2p1

Release notes are available at https://www.openssh.com/txt/release-9.2

OpenSSH 9.2 contains fixes for two security problems and a memory safety
problem. The memory safety problem is not believed to be exploitable.
These fixes have already been committed to OpenSSH 9.1 in FreeBSD.

Some other notable items from the release notes:

* ssh(1): add a new EnableEscapeCommandline ssh_config(5) option that
controls whether the client-side ~C escape sequence that provides a
command-line is available. Among other things, the ~C command-line
could be used to add additional port-forwards at runtime.

* sshd(8): add support for channel inactivity timeouts via a new
sshd_config(5) ChannelTimeout directive. This allows channels that
have not seen traffic in a configurable interval to be
automatically closed. Different timeouts may be applied to session,
X11, agent and TCP forwarding channels.

* sshd(8): add a sshd_config UnusedConnectionTimeout option to
terminate client connections that have no open channels for a
length of time. This complements the ChannelTimeout option above.

* sshd(8): add a -V (version) option to sshd like the ssh client has.

* scp(1), sftp(1): add a -X option to both scp(1) and sftp(1) to
allow control over some SFTP protocol parameters: the copy buffer
length and the number of in-flight requests, both of which are used
during upload/download. Previously these could be controlled in
sftp(1) only. This makes them available in both SFTP protocol
clients using the same option character sequence.

* ssh-keyscan(1): allow scanning of complete CIDR address ranges,
e.g. "ssh-keyscan 192.168.0.0/24". If a CIDR range is passed, then
it will be expanded to all possible addresses in the range
including the all-0s and all-1s addresses. bz#976

* ssh(1): support dynamic remote port forwarding in escape
command-line's -R processing. bz#3499

MFC after: 1 week
Sponsored by: The FreeBSD Foundation

ssh: Update to OpenSSH 9.3p1

This release fixes a number of security bugs and has minor new
features and bug fixes. Security fixes, from the release notes
(https://www.openssh.com/txt/release-9.3):

This release contains fixes for a security problem and a memory
safety problem. The memory safety problem is not believed to be
exploitable, but we report most network-reachable memory faults as
security bugs.

* ssh-add(1): when adding smartcard keys to ssh-agent(1) with the
per-hop destination constraints (ssh-add -h ...) added in OpenSSH
8.9, a logic error prevented the constraints from being
communicated to the agent. This resulted in the keys being added
without constraints. The common cases of non-smartcard keys and
keys without destination constraints are unaffected. This problem
was reported by Luci Stanescu.

* ssh(1): Portable OpenSSH provides an implementation of the
getrrsetbyname(3) function if the standard library does not
provide it, for use by the VerifyHostKeyDNS feature. A
specifically crafted DNS response could cause this function to
perform an out-of-bounds read of adjacent stack data, but this
condition does not appear to be exploitable beyond denial-of-
service to the ssh(1) client.

The getrrsetbyname(3) replacement is only included if the system's
standard library lacks this function and portable OpenSSH was not
compiled with the ldns library (--with-ldns). getrrsetbyname(3) is
only invoked if using VerifyHostKeyDNS to fetch SSHFP records. This
problem was found by the Coverity static analyzer.

Sponsored by: The FreeBSD Foundation

ssh: update to OpenSSH 9.2p1

Release notes are available at https://www.openssh.com/txt/release-9.2

OpenSSH 9.2 contains fixes for two security problems and a memory safety
problem. The memory safety problem is not believed to be exploitable.
These fixes have already been committed to OpenSSH 9.1 in FreeBSD.

Some other notable items from the release notes:

* ssh(1): add a new EnableEscapeCommandline ssh_config(5) option that
controls whether the client-side ~C escape sequence that provides a
command-line is available. Among other things, the ~C command-line
could be used to add additional port-forwards at runtime.

* sshd(8): add support for channel inactivity timeouts via a new
sshd_config(5) ChannelTimeout directive. This allows channels that
have not seen traffic in a configurable interval to be
automatically closed. Different timeouts may be applied to session,
X11, agent and TCP forwarding channels.

* sshd(8): add a sshd_config UnusedConnectionTimeout option to
terminate client connections that have no open channels for a
length of time. This complements the ChannelTimeout option above.

* sshd(8): add a -V (version) option to sshd like the ssh client has.

* scp(1), sftp(1): add a -X option to both scp(1) and sftp(1) to
allow control over some SFTP protocol parameters: the copy buffer
length and the number of in-flight requests, both of which are used
during upload/download. Previously these could be controlled in
sftp(1) only. This makes them available in both SFTP protocol
clients using the same option character sequence.

* ssh-keyscan(1): allow scanning of complete CIDR address ranges,
e.g. "ssh-keyscan 192.168.0.0/24". If a CIDR range is passed, then
it will be expanded to all possible addresses in the range
including the all-0s and all-1s addresses. bz#976

* ssh(1): support dynamic remote port forwarding in escape
command-line's -R processing. bz#3499

MFC after: 1 week
Sponsored by: The FreeBSD Foundation

ssh: update to OpenSSH 9.2p1

Release notes are available at https://www.openssh.com/txt/release-9.2

OpenSSH 9.2 contains fixes for two security problems and a memory safety
problem. The memory safety problem is not believed to be exploitable.
These fixes have already been committed to OpenSSH 9.1 in FreeBSD.

Some other notable items from the release notes:

* ssh(1): add a new EnableEscapeCommandline ssh_config(5) option that
controls whether the client-side ~C escape sequence that provides a
command-line is available. Among other things, the ~C command-line
could be used to add additional port-forwards at runtime.

* sshd(8): add support for channel inactivity timeouts via a new
sshd_config(5) ChannelTimeout directive. This allows channels that
have not seen traffic in a configurable interval to be
automatically closed. Different timeouts may be applied to session,
X11, agent and TCP forwarding channels.

* sshd(8): add a sshd_config UnusedConnectionTimeout option to
terminate client connections that have no open channels for a
length of time. This complements the ChannelTimeout option above.

* sshd(8): add a -V (version) option to sshd like the ssh client has.

* scp(1), sftp(1): add a -X option to both scp(1) and sftp(1) to
allow control over some SFTP protocol parameters: the copy buffer
length and the number of in-flight requests, both of which are used
during upload/download. Previously these could be controlled in
sftp(1) only. This makes them available in both SFTP protocol
clients using the same option character sequence.

* ssh-keyscan(1): allow scanning of complete CIDR address ranges,
e.g. "ssh-keyscan 192.168.0.0/24". If a CIDR range is passed, then
it will be expanded to all possible addresses in the range
including the all-0s and all-1s addresses. bz#976

* ssh(1): support dynamic remote port forwarding in escape
command-line's -R processing. bz#3499

MFC after: 1 week
Sponsored by: The FreeBSD Foundation