ssh: Update to OpenSSH 9.4p1

Excerpts from the release notes:

* ssh-agent(1): PKCS#11 modules must now be specified by their full
paths. Previously dlopen(3) could search for them in system
library directories.

* ssh(1): allow forwarding Unix Domain sockets via ssh -W.

* ssh(1): add support for configuration tags to ssh(1).
This adds a ssh_config(5) "Tag" directive and corresponding
"Match tag" predicate that may be used to select blocks of
configuration similar to the pf.conf(5) keywords of the same
name.

* ssh(1): add a "match localnetwork" predicate. This allows matching
on the addresses of available network interfaces and may be used to
vary the effective client configuration based on network location.

* ssh-agent(1): improve isolation between loaded PKCS#11 modules
by running separate ssh-pkcs11-helpers for each loaded provider.

* ssh-agent(1), ssh(1): improve defences against invalid PKCS#11
modules being loaded by checking that the requested module
contains the required symbol before loading it.

* ssh(1): don't incorrectly disable hostname canonicalization when
CanonicalizeHostname=yes and ProxyJump was expicitly set to
"none". bz3567

Full release notes at https://www.openssh.com/txt/release-9.4

Relnotes: Yes
Sponsored by: The FreeBSD Foundation

ssh: Update to OpenSSH 9.3p1

This release fixes a number of security bugs and has minor new
features and bug fixes. Security fixes, from the release notes
(https://www.openssh.com/txt/release-9.3):

This release contains fixes for a security problem and a memory
safety problem. The memory safety problem is not believed to be
exploitable, but we report most network-reachable memory faults as
security bugs.

* ssh-add(1): when adding smartcard keys to ssh-agent(1) with the
per-hop destination constraints (ssh-add -h ...) added in OpenSSH
8.9, a logic error prevented the constraints from being
communicated to the agent. This resulted in the keys being added
without constraints. The common cases of non-smartcard keys and
keys without destination constraints are unaffected. This problem
was reported by Luci Stanescu.

* ssh(1): Portable OpenSSH provides an implementation of the
getrrsetbyname(3) function if the standard library does not
provide it, for use by the VerifyHostKeyDNS feature. A
specifically crafted DNS response could cause this function to
perform an out-of-bounds read of adjacent stack data, but this
condition does not appear to be exploitable beyond denial-of-
service to the ssh(1) client.

The getrrsetbyname(3) replacement is only included if the system's
standard library lacks this function and portable OpenSSH was not
compiled with the ldns library (--with-ldns). getrrsetbyname(3) is
only invoked if using VerifyHostKeyDNS to fetch SSHFP records. This
problem was found by the Coverity static analyzer.

Sponsored by: The FreeBSD Foundation

openssh: update to OpenSSH v8.7p1

Some notable changes, from upstream's release notes:

- sshd(8): Remove support for obsolete "host/port" syntax.
- ssh(1): When prompting whether to record a new host key, accept the key
fingerprint as a synonym for "yes".
- ssh-keygen(1): when acting as a CA and signing certificates with an RSA
key, default to using the rsa-sha2-512 signature algorithm.
- ssh(1), sshd(8), ssh-keygen(1): this release removes the "ssh-rsa"
(RSA/SHA1) algorithm from those accepted for certificate signatures.
- ssh-sk-helper(8): this is a new binary. It is used by the FIDO/U2F
support to provide address-space isolation for token middleware
libraries (including the internal one).
- ssh(1): this release enables UpdateHostkeys by default subject to some
conservative preconditions.
- scp(1): this release changes the behaviour of remote to remote copies
(e.g. "scp host-a:/path host-b:") to transfer through the local host
by default.
- scp(1): experimental support for transfers using the SFTP protocol as
a replacement for the venerable SCP/RCP protocol that it has
traditionally used.

Additional integration work is needed to support FIDO/U2F in the base
system.

Deprecation Notice
------------------

OpenSSH will disable the ssh-rsa signature scheme by default in the
next release.

Reviewed by: imp
MFC after: 1 month
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D29985

Upgrade to OpenSSH 7.3p1.

Upgrade to OpenSSH 6.8p1.

Upgrade to OpenSSH 6.7p1, retaining libwrap support (which has been removed
upstream) and a number of security fixes which we had already backported.

MFC after: 1 week

Upgrade to OpenSSH 6.6p1.

Upgrade to OpenSSH 6.5p1.

Upgrade to 6.3p1.

Approved by: re (gjb)

Upgrade to OpenSSH 5.8p2.

Upgrade to OpenSSH 5.4p1.

MFC after: 1 month

Upgrade to OpenSSH 5.3p1.

Upgrade to OpenSSH 5.2p1.

MFC after: 3 months

Upgrade to OpenSSH 5.1p1.

I have worked hard to reduce diffs against the vendor branch. One
notable change in that respect is that we no longer prefer DSA over
RSA - the reasons for doing so went away years ago. This may cause
some surprises, as ssh will warn about unknown host keys even for
hosts whose keys haven't changed.

MFC after: 6 weeks

Properly flatten openssh/dist.

Merge conflicts.

MFC after: 1 week

Vendor import of OpenSSH 4.4p1.

Merge conflicts.

Vendor import of OpenSSH 4.3p1.

Resolve conflicts.

Vendor import of OpenSSH 4.2p1.

Resolve conflicts.

Vendor import of OpenSSH 4.1p1.

Vendor import of OpenSSH 4.0p1.

Resolve conflicts

Vendor import of OpenSSH 3.9p1.

Resolve conflicts.

Vendor import of OpenSSH 3.8.1p1.

Resolve conflicts.

Vendor import of OpenSSH 3.8p1.

Resolve conflicts and remove obsolete files.

Sponsored by: registrar.no

Vendor import of OpenSSH 3.7.1p2.

Remove RCSID from files which have no other diffs to the vendor branch.

Resolve conflicts.

Vendor import of OpenSSH-portable 3.6.1p1.

Resolve conflicts.

Vendor import of OpenSSH-portable 3.5p1.

Forcibly revert to mainline.

Vendor import of OpenSSH 3.3p1.

Resolve conflicts. Known issues:

- sshd fails to set TERM correctly.
- privilege separation may break PAM and is currently turned off.
- man pages have not yet been updated

I will have these issues resolved, and privilege separation turned on by
default, in time for DP2.

Sponsored by: DARPA, NAI Labs

Vendor import of OpenSSH 3.3.

Fix conflicts.

Vendor import of OpenSSH 3.1

Fix conflicts for OpenSSH 2.9.

Say "hi" to the latest in the OpenSSH series, version 2.9!

Happy birthday to: rwatson

Update to OpenSSH 2.3.0 with FreeBSD modifications. OpenSSH 2.3.0
new features description elided in favor of checking out their
website.

Important new FreeBSD-version stuff: PAM support has been worked
in, partially from the "Unix" OpenSSH version, and a lot due to the
work of Eivind Eklend, too.

This requires at least the following in pam.conf:

sshd auth sufficient pam_skey.so
sshd auth required pam_unix.so try_first_pass
sshd session required pam_permit.so

Parts by: Eivind Eklend <eivind@FreeBSD.org>

Import of OpenSSH 2.3.0 (virgin OpenBSD source release).

Resolve conflicts and update for OpenSSH 2.2.0

Reviewed by: gshapiro, peter, green

Initial import of OpenSSH post-2.2.0 snapshot dated 2000-09-09

Make rate limiting work per-listening-socket. Log better messages than
before for this, requiring a new function (get_ipaddr()). canohost.c
receives a $FreeBSD$ line.

Suggested by: Niels Provos <niels@OpenBSD.org>

Initial import of OpenSSH v2.1.

Vendor import of OpenSSH.

ssh: Update to OpenSSH 9.3p1

This release fixes a number of security bugs and has minor new
features and bug fixes. Security fixes, from the release notes
(https://www.openssh.com/txt/release-9.3):

This release contains fixes for a security problem and a memory
safety problem. The memory safety problem is not believed to be
exploitable, but we report most network-reachable memory faults as
security bugs.

* ssh-add(1): when adding smartcard keys to ssh-agent(1) with the
per-hop destination constraints (ssh-add -h ...) added in OpenSSH
8.9, a logic error prevented the constraints from being
communicated to the agent. This resulted in the keys being added
without constraints. The common cases of non-smartcard keys and
keys without destination constraints are unaffected. This problem
was reported by Luci Stanescu.

* ssh(1): Portable OpenSSH provides an implementation of the
getrrsetbyname(3) function if the standard library does not
provide it, for use by the VerifyHostKeyDNS feature. A
specifically crafted DNS response could cause this function to
perform an out-of-bounds read of adjacent stack data, but this
condition does not appear to be exploitable beyond denial-of-
service to the ssh(1) client.

The getrrsetbyname(3) replacement is only included if the system's
standard library lacks this function and portable OpenSSH was not
compiled with the ldns library (--with-ldns). getrrsetbyname(3) is
only invoked if using VerifyHostKeyDNS to fetch SSHFP records. This
problem was found by the Coverity static analyzer.

Sponsored by: The FreeBSD Foundation

openssh: update to OpenSSH v8.7p1

Some notable changes, from upstream's release notes:

- sshd(8): Remove support for obsolete "host/port" syntax.
- ssh(1): When prompting whether to record a new host key, accept the key
fingerprint as a synonym for "yes".
- ssh-keygen(1): when acting as a CA and signing certificates with an RSA
key, default to using the rsa-sha2-512 signature algorithm.
- ssh(1), sshd(8), ssh-keygen(1): this release removes the "ssh-rsa"
(RSA/SHA1) algorithm from those accepted for certificate signatures.
- ssh-sk-helper(8): this is a new binary. It is used by the FIDO/U2F
support to provide address-space isolation for token middleware
libraries (including the internal one).
- ssh(1): this release enables UpdateHostkeys by default subject to some
conservative preconditions.
- scp(1): this release changes the behaviour of remote to remote copies
(e.g. "scp host-a:/path host-b:") to transfer through the local host
by default.
- scp(1): experimental support for transfers using the SFTP protocol as
a replacement for the venerable SCP/RCP protocol that it has
traditionally used.

Additional integration work is needed to support FIDO/U2F in the base
system.

Deprecation Notice
------------------

OpenSSH will disable the ssh-rsa signature scheme by default in the
next release.

Reviewed by: imp
MFC after: 1 month
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D29985

Upgrade to OpenSSH 7.3p1.

Upgrade to OpenSSH 6.8p1.

Upgrade to OpenSSH 6.7p1, retaining libwrap support (which has been removed
upstream) and a number of security fixes which we had already backported.

MFC after: 1 week

Upgrade to OpenSSH 6.6p1.

Upgrade to OpenSSH 6.5p1.

Upgrade to 6.3p1.

Approved by: re (gjb)

Upgrade to OpenSSH 5.8p2.

Upgrade to OpenSSH 5.4p1.

MFC after: 1 month

Upgrade to OpenSSH 5.3p1.

Upgrade to OpenSSH 5.2p1.

MFC after: 3 months

Upgrade to OpenSSH 5.1p1.

I have worked hard to reduce diffs against the vendor branch. One
notable change in that respect is that we no longer prefer DSA over
RSA - the reasons for doing so went away years ago. This may cause
some surprises, as ssh will warn about unknown host keys even for
hosts whose keys haven't changed.

MFC after: 6 weeks

Properly flatten openssh/dist.

Merge conflicts.

MFC after: 1 week

Vendor import of OpenSSH 4.4p1.

Merge conflicts.

Vendor import of OpenSSH 4.3p1.

Resolve conflicts.

Vendor import of OpenSSH 4.2p1.

Resolve conflicts.

Vendor import of OpenSSH 4.1p1.

Vendor import of OpenSSH 4.0p1.

Resolve conflicts

Vendor import of OpenSSH 3.9p1.

Resolve conflicts.

Vendor import of OpenSSH 3.8.1p1.

Resolve conflicts.

Vendor import of OpenSSH 3.8p1.

Resolve conflicts and remove obsolete files.

Sponsored by: registrar.no

Vendor import of OpenSSH 3.7.1p2.

Remove RCSID from files which have no other diffs to the vendor branch.

Resolve conflicts.

Vendor import of OpenSSH-portable 3.6.1p1.

Resolve conflicts.

Vendor import of OpenSSH-portable 3.5p1.

Forcibly revert to mainline.

Vendor import of OpenSSH 3.3p1.

Resolve conflicts. Known issues:

- sshd fails to set TERM correctly.
- privilege separation may break PAM and is currently turned off.
- man pages have not yet been updated

I will have these issues resolved, and privilege separation turned on by
default, in time for DP2.

Sponsored by: DARPA, NAI Labs

Vendor import of OpenSSH 3.3.

Fix conflicts.

Vendor import of OpenSSH 3.1

Fix conflicts for OpenSSH 2.9.

Say "hi" to the latest in the OpenSSH series, version 2.9!

Happy birthday to: rwatson

Update to OpenSSH 2.3.0 with FreeBSD modifications. OpenSSH 2.3.0
new features description elided in favor of checking out their
website.

Important new FreeBSD-version stuff: PAM support has been worked
in, partially from the "Unix" OpenSSH version, and a lot due to the
work of Eivind Eklend, too.

This requires at least the following in pam.conf:

sshd auth sufficient pam_skey.so
sshd auth required pam_unix.so try_first_pass
sshd session required pam_permit.so

Parts by: Eivind Eklend <eivind@FreeBSD.org>

Import of OpenSSH 2.3.0 (virgin OpenBSD source release).

Resolve conflicts and update for OpenSSH 2.2.0

Reviewed by: gshapiro, peter, green

Initial import of OpenSSH post-2.2.0 snapshot dated 2000-09-09

Make rate limiting work per-listening-socket. Log better messages than
before for this, requiring a new function (get_ipaddr()). canohost.c
receives a $FreeBSD$ line.

Suggested by: Niels Provos <niels@OpenBSD.org>

Initial import of OpenSSH v2.1.

Vendor import of OpenSSH.

openssh: update to OpenSSH v8.7p1

Some notable changes, from upstream's release notes:

- sshd(8): Remove support for obsolete "host/port" syntax.
- ssh(1): When prompting whether to record a new host key, accept the key
fingerprint as a synonym for "yes".
- ssh-keygen(1): when acting as a CA and signing certificates with an RSA
key, default to using the rsa-sha2-512 signature algorithm.
- ssh(1), sshd(8), ssh-keygen(1): this release removes the "ssh-rsa"
(RSA/SHA1) algorithm from those accepted for certificate signatures.
- ssh-sk-helper(8): this is a new binary. It is used by the FIDO/U2F
support to provide address-space isolation for token middleware
libraries (including the internal one).
- ssh(1): this release enables UpdateHostkeys by default subject to some
conservative preconditions.
- scp(1): this release changes the behaviour of remote to remote copies
(e.g. "scp host-a:/path host-b:") to transfer through the local host
by default.
- scp(1): experimental support for transfers using the SFTP protocol as
a replacement for the venerable SCP/RCP protocol that it has
traditionally used.

Additional integration work is needed to support FIDO/U2F in the base
system.

Deprecation Notice
------------------

OpenSSH will disable the ssh-rsa signature scheme by default in the
next release.

Reviewed by: imp
MFC after: 1 month
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D29985

Upgrade to OpenSSH 7.3p1.

Upgrade to OpenSSH 6.8p1.

Upgrade to OpenSSH 6.7p1, retaining libwrap support (which has been removed
upstream) and a number of security fixes which we had already backported.

MFC after: 1 week

Upgrade to OpenSSH 6.6p1.

Upgrade to OpenSSH 6.5p1.

Upgrade to 6.3p1.

Approved by: re (gjb)

Upgrade to OpenSSH 5.8p2.

Upgrade to OpenSSH 5.4p1.

MFC after: 1 month

Upgrade to OpenSSH 5.3p1.

Upgrade to OpenSSH 5.2p1.

MFC after: 3 months

Upgrade to OpenSSH 5.1p1.

I have worked hard to reduce diffs against the vendor branch. One
notable change in that respect is that we no longer prefer DSA over
RSA - the reasons for doing so went away years ago. This may cause
some surprises, as ssh will warn about unknown host keys even for
hosts whose keys haven't changed.

MFC after: 6 weeks

Properly flatten openssh/dist.

Merge conflicts.

MFC after: 1 week

Vendor import of OpenSSH 4.4p1.

Merge conflicts.

Vendor import of OpenSSH 4.3p1.

Resolve conflicts.

Vendor import of OpenSSH 4.2p1.

Resolve conflicts.

Vendor import of OpenSSH 4.1p1.

Vendor import of OpenSSH 4.0p1.

Resolve conflicts

Vendor import of OpenSSH 3.9p1.

Resolve conflicts.

Vendor import of OpenSSH 3.8.1p1.

Resolve conflicts.

Vendor import of OpenSSH 3.8p1.

Resolve conflicts and remove obsolete files.

Sponsored by: registrar.no

Vendor import of OpenSSH 3.7.1p2.

Remove RCSID from files which have no other diffs to the vendor branch.

Resolve conflicts.

Vendor import of OpenSSH-portable 3.6.1p1.

Resolve conflicts.

Vendor import of OpenSSH-portable 3.5p1.

Forcibly revert to mainline.

Vendor import of OpenSSH 3.3p1.

Resolve conflicts. Known issues:

- sshd fails to set TERM correctly.
- privilege separation may break PAM and is currently turned off.
- man pages have not yet been updated

I will have these issues resolved, and privilege separation turned on by
default, in time for DP2.

Sponsored by: DARPA, NAI Labs

Vendor import of OpenSSH 3.3.

Fix conflicts.

Vendor import of OpenSSH 3.1

Fix conflicts for OpenSSH 2.9.

Say "hi" to the latest in the OpenSSH series, version 2.9!

Happy birthday to: rwatson

Update to OpenSSH 2.3.0 with FreeBSD modifications. OpenSSH 2.3.0
new features description elided in favor of checking out their
website.

Important new FreeBSD-version stuff: PAM support has been worked
in, partially from the "Unix" OpenSSH version, and a lot due to the
work of Eivind Eklend, too.

This requires at least the following in pam.conf:

sshd auth sufficient pam_skey.so
sshd auth required pam_unix.so try_first_pass
sshd session required pam_permit.so

Parts by: Eivind Eklend <eivind@FreeBSD.org>

Import of OpenSSH 2.3.0 (virgin OpenBSD source release).

Resolve conflicts and update for OpenSSH 2.2.0

Reviewed by: gshapiro, peter, green

Initial import of OpenSSH post-2.2.0 snapshot dated 2000-09-09

Make rate limiting work per-listening-socket. Log better messages than
before for this, requiring a new function (get_ipaddr()). canohost.c
receives a $FreeBSD$ line.

Suggested by: Niels Provos <niels@OpenBSD.org>

Initial import of OpenSSH v2.1.

Vendor import of OpenSSH.

A new jail(8) with a configuration file, to replace the work currently done
by /etc/rc.d/jail.

MFH OpenSSH 5.4p1

Create the altix project branch. The altix project will add support
for the SGI Altix 350 to FreeBSD/ia64. The hardware used for porting
is a two-module system, consisting of a base compute module and a
CPU expansion module. SGI's NUMAFlex architecture can be an excellent
platform to test CPU affinity and NUMA-aware features in FreeBSD.

- Import the HEAD csup code which is the basis for the cvsmode work.

Merge conflicts.

MFC after: 1 week

Vendor import of OpenSSH 4.4p1.

Merge conflicts.

Vendor import of OpenSSH 4.3p1.

Resolve conflicts.

Vendor import of OpenSSH 4.2p1.

Resolve conflicts.

Vendor import of OpenSSH 4.1p1.

Vendor import of OpenSSH 4.0p1.

Resolve conflicts

Vendor import of OpenSSH 3.9p1.

Resolve conflicts.

Vendor import of OpenSSH 3.8.1p1.

Resolve conflicts.

Vendor import of OpenSSH 3.8p1.

Resolve conflicts and remove obsolete files.

Sponsored by: registrar.no

Vendor import of OpenSSH 3.7.1p2.

Remove RCSID from files which have no other diffs to the vendor branch.

Resolve conflicts.

Vendor import of OpenSSH-portable 3.6.1p1.

Resolve conflicts.

Vendor import of OpenSSH-portable 3.5p1.

Forcibly revert to mainline.

Vendor import of OpenSSH 3.3p1.

Resolve conflicts. Known issues:

- sshd fails to set TERM correctly.
- privilege separation may break PAM and is currently turned off.
- man pages have not yet been updated

I will have these issues resolved, and privilege separation turned on by
default, in time for DP2.

Sponsored by: DARPA, NAI Labs

Vendor import of OpenSSH 3.3.

Fix conflicts.

Vendor import of OpenSSH 3.1

Fix conflicts for OpenSSH 2.9.

Say "hi" to the latest in the OpenSSH series, version 2.9!

Happy birthday to: rwatson

Update to OpenSSH 2.3.0 with FreeBSD modifications. OpenSSH 2.3.0
new features description elided in favor of checking out their
website.

Important new FreeBSD-version stuff: PAM support has been worked
in, partially from the "Unix" OpenSSH version, and a lot due to the
work of Eivind Eklend, too.

This requires at least the following in pam.conf:

sshd auth sufficient pam_skey.so
sshd auth required pam_unix.so try_first_pass
sshd session required pam_permit.so

Parts by: Eivind Eklend <eivind@FreeBSD.org>

Import of OpenSSH 2.3.0 (virgin OpenBSD source release).

Resolve conflicts and update for OpenSSH 2.2.0

Reviewed by: gshapiro, peter, green

Initial import of OpenSSH post-2.2.0 snapshot dated 2000-09-09

Make rate limiting work per-listening-socket. Log better messages than
before for this, requiring a new function (get_ipaddr()). canohost.c
receives a $FreeBSD$ line.

Suggested by: Niels Provos <niels@OpenBSD.org>

Initial import of OpenSSH v2.1.

Vendor import of OpenSSH.