Commit the 64-bit inode project.

Extend the ino_t, dev_t, nlink_t types to 64-bit ints. Modify
struct dirent layout to add d_off, increase the size of d_fileno
to 64-bits, increase the size of d_namlen to 16-bits, and change
the required alignment. Increase struct statfs f_mntfromname[] and
f_mntonname[] array length MNAMELEN to 1024.

ABI breakage is mitigated by providing compatibility using versioned
symbols, ingenious use of the existing padding in structures, and
by employing other tricks. Unfortunately, not everything can be
fixed, especially outside the base system. For instance, third-party
APIs which pass struct stat around are broken in backward and
forward incompatible ways.

Kinfo sysctl MIBs ABI is changed in backward-compatible way, but
there is no general mechanism to handle other sysctl MIBS which
return structures where the layout has changed. It was considered
that the breakage is either in the management interfaces, where we
usually allow ABI slip, or is not important.

Struct xvnode changed layout, no compat shims are provided.

For struct xtty, dev_t tty device member was reduced to uint32_t.
It was decided that keeping ABI compat in this case is more useful
than reporting 64-bit dev_t, for the sake of pstat.

Update note: strictly follow the instructions in UPDATING. Build
and install the new kernel with COMPAT_FREEBSD11 option enabled,
then reboot, and only then install new world.

Credits: The 64-bit inode project, also known as ino64, started life
many years ago as a project by Gleb Kurtsou (gleb). Kirk McKusick
(mckusick) then picked up and updated the patch, and acted as a
flag-waver. Feedback, suggestions, and discussions were carried
by Ed Maste (emaste), John Baldwin (jhb), Jilles Tjoelker (jilles),
and Rick Macklem (rmacklem). Kris Moore (kris) performed an initial
ports investigation followed by an exp-run by Antoine Brodin (antoine).
Essential and all-embracing testing was done by Peter Holm (pho).
The heavy lifting of coordinating all these efforts and bringing the
project to completion were done by Konstantin Belousov (kib).

Sponsored by: The FreeBSD Foundation (emaste, kib)
Differential revision: https://reviews.freebsd.org/D10439

A new jail(8) with a configuration file, to replace the work currently done
by /etc/rc.d/jail.

Create the altix project branch. The altix project will add support
for the SGI Altix 350 to FreeBSD/ia64. The hardware used for porting
is a two-module system, consisting of a base compute module and a
CPU expansion module. SGI's NUMAFlex architecture can be an excellent
platform to test CPU affinity and NUMA-aware features in FreeBSD.

- Import the HEAD csup code which is the basis for the cvsmode work.

Vendor import TrustedBSD OpenBSM 1.0 alpha 14, with the following change
history notes since the last import:

OpenBSM 1.0 alpha 14

- Fix endian issues when processing IPv6 addresses for extended subject
and process tokens.
- gcc41 warnings clean.
- Teach audit_submit(3) about getaudit_addr(2).
- Add support for zonename tokens.

OpenBSM 1.0 alpha 13

- compat/clock_gettime.h now provides a compatibility implementation of
clock_gettime(), which fixes building on Mac OS X.
- Countless man page improvements, markup fixes, content fixs, etc.
- XML printing support via "praudit -x".
- audit.log.5 expanded to include additional BSM token types.
- Added encoding and decoding routines for process64_ex, process32_ex,
subject32_ex, header64, and attr64 tokens.
- Additional audit event identifiers for listen, mlockall/munlockall,
getpath, POSIX message queues, and mandatory access control.

Approved by: re (bmah)
MFC after: 3 weeks
Obtained from: TrustedBSD Project

Vendor branch import of TrustedBSD OpenBSM 1.0 alpha 6:

- Use AU_TO_WRITE and AU_NO_TO_WRITE for the 'keep' argument to au_close();
previously we used hard-coded 0 and 1 values.
- Add man page for au_open(), au_write(), au_close(), and
au_close_buffer().
- Support a more complete range of data types for the arbitrary data token:
add AUR_CHAR (alias to AUR_BYTE), remove AUR_LONG, add AUR_INT32 (alias
to AUR_INT), add AUR_INT64.
- Add au_close_token(), which allows writing a single token_t to a memory
buffer. Not likely to be used much by applications, but useful for
writing test tools.
- Modify au_to_file() so that it accepts a timeval in user space, not just
kernel -- this is not a Solaris BSM API so can be modified without
causing compatibility issues.
- Define a new API, au_to_header32_tm(), which adds a struct timeval
argument to the ordinary au_to_header32(), which is now implemented by
wrapping au_to_header32_tm() and calling gettimeofday(). #ifndef KERNEL
the APIs that invoke gettimeofday(), rather than having a variable
definition. Don't try to retrieve time zone information using
gettimeofday(), as it's not needed, and introduces possible failure
modes.
- Don't perform byte order transformations on the addr/machine fields of
the terminal ID that appears in the process32/subject32 tokens. These
are assumed to be IP addresses, and as such, to be in network byte
order.
- Universally, APIs now assume that IP addresses and ports are provided
in network byte order. APIs now generally provide these types in
network byte order when decoding.
- Beginnings of an OpenBSM test framework can now be found in openbsm/test.
This code is not built or installed by default.
- auditd now assigns more appropriate syslog levels to its debugging and
error information.
- Support for audit filters introduced: audit filters are dynamically
loaded shared objects that run in the context of a new daemon,
auditfilterd. The daemon reads from an audit pipe and feeds both BSM and
parsed versions of records to shared objects using a module API. This
will provide a framework for the writing of intrusion detection services.
- New utility API, audit_submit(), added to capture common elements of audit
record submission for many applications.

Obtained from: TrustedBSD Project

Vendor branch import of TrustedBSD OpenBSM 1.0 alpha 5:

- Update install notes to indicate /etc files are to be installed manually.
- On systems without LOG_SECURITY, use LOG_AUTH.
- Convert to autoconf/automake in order to move to a more portable (not
BSD-specific) build infrastructure, and more easy conditional building of
components. Currently, the primary feature loss is that automake does
not have native support for manual symlinks. This will be addressed in a
future OpenBSM release.
- Add compat/queue.h, to be used on systems dated BSD queue macro libraries
(as found on Linux).
- Rename CHANGELOG to HISTORY, as our change log doesn't follow some of the
existing conventions for a CHANGELOG.
- Some private data structures moved from audit.h to audit_internal.h to
prevent inappropriate use by applications and name space pollution.
- Improved detection and use of endian macros using autoconf.
- Avoid non-portable use of struct in6_addr, which is largely opaque.
- Avoid leaking BSD kernel socket related token code to user space in
bsm_token.c.
- Teach System V IPC calls to look for Linux naming variations for certain
struct ipc_perm fields.
- Test for audit system calls, and if not present, don't build
bsm_wrappers.c, bsm_notify.c, audit(8), and auditd(8), which rely on
those system calls.
- au_close() is not implemented on systems that don't have audit system
calls, but au_close_buffer() is.
- Work around missing BSDisms in bsm_wrapper.c.
- Fix nested includes so including libbsm.h in an application on Linux
picks up the necessary definitions.

Obtained from: TrustedBSD Project

CVS import OpenBSM 1.0 alpha 4:

- Remove "audit" user example from audit_user, as it's not present on most
systems.
- Add cannot_audit() function non-Darwin systems that wraps auditon();
required by OpenSSH BSM support. Convert Darwin cannot_audit() into a
function rather than a macro.
- Library build fixed on Darwin following include file tweaks. The native
Darwin sys/audit.h conflicts with bsm/audit.h due to duplicate types, so
for now we force bsm_wrappers.c to not perform a nested include of
sys/audit.h.

Obtained from: TrustedBSD Project

Initial vendor import of the TrustedBSD OpenBSM distribution, version
1.0 alpha 1, an implementation of the documented Sun Basic Security
Module (BSM) Audit API and file format, as well as local extensions to
support the Mac OS X and FreeBSD operating systems. Also included are
command line tools for audit trail reduction and conversion to text,
as well as documentation of the commands, file format, and APIs. This
distribution is the foundation for the TrustedBSD Audit implementation,
and is a pre-release.

This is the first in a series of commits to introduce support for
Common Criteria CAPP security event audit support.

This software has been made possible through the generous
contributions of Apple Computer, Inc., SPARTA, Inc., as well as
members of the TrustedBSD Project, including Wayne Salamon <wsalamon>
and Tom Rhodes <trhodes>. The original OpenBSM implementation was
created by McAfee Research under contract to Apple Computer, Inc., as
part of their CC CAPP security evaluation.

Many thanks to: wsalamon, trhodes
Obtained from: TrustedBSD Project