Copy stable/9 to releng/9.3 as part of the 9.3-RELEASE cycle.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

Copy head to stable/9 as part of 9.0-RELEASE release cycle.

Approved by: re (implicit)

Remove duplicated header files

- Whenever a password/shell is changed via rpc.yppasswdd, the daemon leaves
one zombie process because it does not do the cleanup. For a long running
NIS/YP server, it will have lots of zombie processes on it. Fix that by
ignoring the SIGCHLD signal since we don't really care about the exit
status in this case.

PR: bin/91980
Reported by: Arjan van der Velde <dj_noresult at hotmail.com>
Submitted by: Jui-Nan Lin" <jnlin at csie.nctu.edu.tw>
Reviewed by: delphij
MFC after: 1 month

Use socklen_t in place of socket operations, instead of int

Remove definition of struct dom_binding, it's non-standard C code and
unnecessary since src/include/rpcsvc/ypclnt.h's revision 1.10.

Use __FBSDID over rcsid[]. Protect copyright[] where needed.

Implement nonblocking tpc-connections. rpcgen -m does still
produce backcompatible code.

Reviewed by: rwatson
Obtained from: NetBSD
MFC after: 1 day

unbreak build: fix multi-line string literal

Use libutil instead of pw_{copy,util}.c. Clean up a little. Warnsify.

Sponsored by: DARPA, NAI Labs

ANSIfy and remove some dead code.

Sponsored by: DARPA, NAI Labs

Apply the following mechanical transformations in preparation for
ansification and constification:

s{\s+__P\((\(.*?\))\)}{$1}g;
s{\(\s+}{\(}g;
s{\s+\)}{\)}g;
s{\s+,}{,}g;
s{(\s+)(for|if|switch|while)\(}{$1$2 \(}g;
s{return ([^\(].*?);}{return ($1);}g;
s{([\w\)])([!=+/\*-]?=)([\w\(+-])}{$1 $2 $3}g;
s{\s+$}{\n};g

Also add $FreeBSD$ where needed.

MFC after: 1 week

Fix the breakage in rpc.yppasswd. Readded the svc_create() and
the registering of the "unix" transport, now it is fixed.

Everywhere, rq_cred is taken to look what authentification we have.
We can not be sure that transp>xp_verf.oa_flavor is also filled in.
This seems to be the same for all sun source. they take the flavor
of rq_cred, instead of transp.

Submitted by: mbr

Bring in a hybrid of SunSoft's transport-independent RPC (TI-RPC) and
associated changes that had to happen to make this possible as well as
bugs fixed along the way.

Bring in required TLI library routines to support this.

Since we don't support TLI we've essentially copied what NetBSD
has done, adding a thin layer to emulate direct the TLI calls
into BSD socket calls.

This is mostly from Sun's tirpc release that was made in 1994,
however some fixes were backported from the 1999 release (supposedly
only made available after this porting effort was underway).

The submitter has agreed to continue on and bring us up to the
1999 release.

Several key features are introduced with this update:
Client calls are thread safe. (1999 code has server side thread
safe)
Updated, a more modern interface.

Many userland updates were done to bring the code up to par with
the recent RPC API.

There is an update to the pthreads library, a function
pthread_main_np() was added to emulate a function of Sun's threads
library.

While we're at it, bring in NetBSD's lockd, it's been far too
long of a wait.

New rpcbind(8) replaces portmap(8) (supporting communication over
an authenticated Unix-domain socket, and by default only allowing
set and unset requests over that channel). It's much more secure
than the old portmapper.

Umount(8), mountd(8), mount_nfs(8), nfsd(8) have also been upgraded
to support TI-RPC and to support IPV6.

Umount(8) is also fixed to unmount pathnames longer than 80 chars,
which are currently truncated by the Kernel statfs structure.

Submitted by: Martin Blapp <mb@imp.ch>
Manpage review: ru
Secure RPC implemented by: wpaul

Remove unused include.

remove extern int errno; include errno.h

$Id$ -> $FreeBSD$

Host names are case-insensitive.

Remove multiply defined Id string. Hide sccsid string.

Modify rpc.yppasswdd to use the new AF_LOCAL transport in the RPC library
instead of its own kludged up version. This makes the special 'superuser-only'
update procedure work just like a real RPC service.

compare return value from getopt against -1 rather than EOF, per the final
posix standard on the topic.

Revert $FreeBSD$ to $Id$

Make the long-awaited change from $Id$ to $FreeBSD$

This will make a number of things easier in the future, as well as (finally!)
avoiding the Id-smashing problem which has plagued developers for so long.

Boy, I'm glad we're not using sup anymore. This update would have been
insane otherwise.

Fix harmless bugs found while hunting for chpass nis failure

Make error messages more informative.

Two small changes that were in my development sources at home
but never made it here for some reason:

- 'u' option was missing from getopt string
- Use daemon() to become daemonic.

Whoops: had a couple of hardcoded instances of '/var/yp/' that shouldn't
have been there. Fixed to use yp_dir, which can be set on the command line.

Added support for in-place updates:

If rpc.yppasswdd is invoked with the -i flag, password changes will
be made to the master.passwd template file and the hash map files
in-place, which means it won't have to run a complete map update.
Instead, it calls /var/yp/Makefile with the 'pushpw' target, which
just pushes the maps to the slaves and runs yp_mkdb -c to tell the
local ypserv to flush its database cache.

The server will check the passwd.byname and passwd.byuid maps to see
if they were built in 'insecure' or 'secure' mode (i.e. with real
encrypted passwords in them or without) and update them accordingly.

This combined with rpc.ypxfrd greatly reduces the amount of time it
takes to complete an NIS password change, especially with very large
passwd databases.

Add securenets support (uses same access control mechanism as ypserv,
also controlled by /var/yp/securenets).

Add -u flag to turn off the privileged port check done by yp_access();
some commercial systems (IRIX, Solaris 2.x, HP-UX, and probably others)
don't use a reserved port for submitting yppasswd updates. If we always
enforce the check, these client systems will be unable to submit updates
to us.

Document securenets support and -u flag in man page.

Like ypserv, you can compile rpc.yppasswdd to use the tcpwrapper package
instead of securenets if you want to.

This commit was generated by cvs2svn to compensate for changes in r14062,
which included commits to RCS files with non-trunk default branches.

Import new rpc.yppasswdd. (Note: accompanying changes to passwd(1) and
chpass(1) are on the way too.) This version supports all the features
of the old one and adds several new ones:

- Supports real multi-domain operation (optional, can be turned
on with a command-line flag). This means you can actually have
several different domains all served from one NIS server and
allow users in any of the supported domains to change their passwords.
The old yppasswdd only allowed changing passwords in the domain
that was set as the system default domain name on the NIS master
server. The new one can change passwords in any domain by trying
to match the user information passed to it against all the passwd
maps it can find. This is something of a hack, but the yppasswd.x
protocol definiton does not allow for a domain to be passwd as an
argument to rpc.yppasswdd, so the server has no choice but to
grope around for a likely match. Since this method can fail if
the same user exists in two domains, this feature is off by default.
If the feature is turned on and the server becomes confused by
duplicate entries, it will abort the update.

- Does not require NIS client services to be available. NIS servers do
_NOT_ necessarily have to be configured as NIS clients in order to
function: the ypserv, ypxfr and yppush programs I've written recently
will operate fine even if the system domain name isn't set, ypbind isn't
running and there are no magic '+' entries in any of the /etc files.
Now rpc.yppasswdd is the same way. The old yppasswdd would not work
like this because it depended on getpwent(3) and friends to look up
users: this will obviously only work if the system where yppasswdd is
running is configured as an NIS client. The new rpc.yppasswdd doesn't
use getpwent(3) at all: instead it searches through the master.passwd
map databases directly. This also makes it easier for it to handle
multiple domains.

- Allows the superuser on the NIS master server to change any user's
password without requiring password authentication. rpc.yppasswdd
creates a UNIX domain socket (/var/run/ypsock) which it monitors
using the same svc_run() loop used to handle incoming RPC requests.
It also clears all the permission bits for /var/run/ypsock; since
this socket is owned by root, this prevents anyone except root from
successfully connect()ing to it. (Using a UNIX domain socket also
prevents IP spoofing attacks.) By building code into passwd(1) and
chpass(1) to take advantage of this 'trusted' channel, the superuser
can use them to send private requests to rpc.yppasswdd.

- Allows the superuser on the NIS master to use chpass(1) to update _all_
of a user's master.passwd information. The UNIX domain access point
accepts a full master.passwd style structure (along with a domain
name and other information), which allows the superuser to update all
of a user's master.passwd information in the NIS master.passwd maps.
Normal users on NIS clients are still only allowed to change their full
name and shell information with chpass.

- Allows the superuser on the NIS master to _add_ records to the NIS
master.passwd maps using chpass(1). This feature is also switchable
with a command-line flag and is off by default.