Remove svn:mergeinfo carried over from stable/9.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

Copy stable/9 to releng/9.3 as part of the 9.3-RELEASE cycle.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

MFC 264765,264766:
- Don't claim the adapter is idle if it is clearing a drive.
- Fix an off by one error when checking for the stop event. This
resulted in not showing the most recent event by default.
- When the stop even is hit, break out of the outer loop to stop
fetching more events.

MFC r260334:

Split the last gcc-specific flags off into CFLAGS.gcc. This also
removes the need to use -Qunused-arguments for clang throughout the
tree.

MFC r260369:

Apply band-aid for 32-bit compat libs failures after r260334: put back
-Qunused-arguments for clang for now, until I can figure out a way to
make it unneeded in all scenarios. Sorry about the breakage.

MFC r258901:

svn r251516 resized the buf argument a bit too much. Pass a hardcoded
size of 6 to humanize_number() to resolve this.

PR: bin/184405
Submitted by: jhb

MFC r254906 -- add SYSPD (real jbod) support to mfiutil

Add support to reconfigure a drive as SYSPD (real JBOD in LSI
terminology).

Adds command "mfiutil syspd <drive#>" to change a drive to SYSPD. Drive
will then be scanned/reported immediately as /dev/mfisyspdX by the host.

"mfiutil good <drive#>" clears SYSPD mode, remove /dev/mfisyspdX and
sets disk into UNCONFIGURED mode.

Tested on Dell H310 SAS/SATA RAID controller.

MFC r251516

Implement foreign device handling.

PR: kern/172091

MFC r250599:
Add a remark to the effect that a manually started relearn will always
result in the battery being completely drained, even in transparent learning
mode.

MFC r249257:
Add support for getting and setting BBU properties related to battery
relearning. Specifically, add subcommands to mfiutil(8) which allow the
user to set the BBU and autolearn modes when the firmware supports it,
and add a subcommand which kicks off a battery relearn.

MFC r249258:
Switch to a 2-clause license.

MFC r237259 r237260 r237329:
Allow users with RO privilege to the device to read the RO attributes. [0]
Add __unused macros to appropriate places in order to allow building
with WARNS=6 on base gcc, gcc46, and clang

PR: bin/167302 [0]
Approved by: cperciva (implicit)

MFC r235634

Decode new battery status indications.

MFC r233713
Remove the magic mfi_array is 288 bytes and just use the
sizeof the array since it is not 288 bytes.

Change reporting of a "SYSTEM" disk to "JBOD" to match
LSI MegaCli and firmware reporting.

This means that mfiutil command to "create jbod" is now a
little confusing since a RAID per drive is not really what
LSI defines JBOD to be. This should be fixed in the future
and support added to really create LSI JBOD and enable that
feature on cards that support it.

MFC r227893 and r228119:

Avoid double free creating a new RAID with invalid command line
arguments.

In build_volume(), check if arrays is allocated before traversing its
items. While parsing the arrays input, it's possible that we reach the
error path before initializing the 'arrays' pointer, which in turn leads
to a NULL deference.

MFC 228278:
Use the correct volume identifier field when parsing MR_EVT_ARG_LD_STRIP
arguments.

MFC: r227006, r227281, r227282

Add a PCI front-end to esp(4) allowing it to support AMD Am53C974 and
replace amd(4) with the former in the amd64, i386 and pc98 GENERIC kernel
configuration files. Besides duplicating functionality, amd(4), which
previously also supported the AMD Am53C974, unlike esp(4) is no longer
maintained and has accumulated enough bit rot over time to always cause
a panic during boot as long as at least one target is attached to it
(see PR 124667).

PR: 124667
Approved by: re (kib)
Obtained from: NetBSD (based on)

MFC r225798: Improve battery capacity reporting

When a status pointer is passed in mfi_dcmd_command does not return an
errno (if the ioctl is successful), so move the test for NO_HW_PRESENT
outside of the error case. This should fix incorrect reporting for
systems with a dead or no battery.

Additionally, handle error codes other than NO_HW_PRESENT by omitting
the battery capacity display. LSI's supercap-based parts (CV series)
report their data using the same interface as battery-based parts,
except that they do not include the capacity stats (state of charge,
cumulative charge cycles, etc.)

PR: bin/160581
Approved by: re

Copy head to stable/9 as part of 9.0-RELEASE release cycle.

Approved by: re (implicit)

Move the logic to parse volume cache commands out into a separate function
and use a loop so that multiple cache commands can be strung together on
the command line into a single update to the volume's properties.

Reviewed by: bz
Approved by: re (kib)
MFC after: 1 week

If a drive is not part of the array (i.e. missing) we need to print the
new line after the pd state information as well, so move it to the outside
of the block.

Submitted by: Mark Johnston at Sandvine Inc
MFC atfer: 3 days
Approved by: re (kib)

Properly initialize an error variable to avoid returning uninitialized
data when 'show drives' succeeds, often resulting in a failing exit code
even though the command worked fine.

Reviewed by: bz
Approved by: re (kib)
MFC after: 3 days

Add global -d and -e options to either print device numbers
(usually default) or enclosure:slot information as (Exx:Sxx)
or both.

Discussed with: jhb
Reviewed by: jhb
Sponsored by: Sandvine Incorporated
MFC after: 1 week

Add 'show logstate' to usage().

MFC after: 1 week

Contrary to when returning in all-good cases at the end of functions we
did not free memory (1) or close the file descriptor (2) in error cases.

Reported by: Mark Johnston (1)
Reported by: attilio (2)
Reviewed by: jhb
Sponsored by: Sandvine Incorporated
MFC after: 1 week

There are a couple of structs in mfireg.h with members named 'class'.
These cause problems when trying to include the header in a C++ project.
Rename them to 'evt_class', and track the change in mfi and mfiutil.

Submitted by: Mark Johnston
Sponsored by: Sandvine Incorporated
Reviewed by: jhb@
MFC after: 1 week

Add a 'show progress' command that shows a summary of all in-progress
commands for a given adapter. Specifically, it shows the status of any
drive or volume activities currently in progress similar to the
'drive process' and 'volume progress' commands.

Reviewed by: emaste
MFC after: 1 week

Fix typo in "continuously" argument used in patrol auto command.

Obtained from: Sascha Wildner <saw att online dott de>
Approved by: jhb
MFC after: 3 days

Add the ability to manage the state of write caching when the battery
back-up is missing or dead. The current state of this field is reported
in 'mfiutil cache <volume>' and can be adjusted via
'mfiutil cache <volume> bad-bbu-write-cache <enable|disable>'. This
setting should generally be disabled to avoid data loss.

MFC after: 1 week

Preserve errno in an error case.

Submitted by: gcooper

Add more details to the 'show battery' command including more raw
capacity values, charge cycle count, temperature, and more detailed
status.

Reviewed by: bz, emaste (older version)
MFC after: 1 week

Fix division by zero, causing floating point exception in a drive progress
command.

It was possible to read a value of zero from a busy controller used
as the divisor to calculate the remaining rebuild time.

Reported by: Pavel Udovenko <udovenko att nic.ru>
Discussed with: jhb
Approved by: kib (mentor)
MFC after: 1 week

Handle malloc() failures more gracefully by error'ing out rather than
segfaulting.

Submitted by: gcooper
MFC after: 1 week

Fix typo.

- Save errno values before calling warn(3) so that errors are correctly
reported.
- Use powerof2() from <sys/param.h> rather than a copy and paste version.

Submitted by: gcooper
MFC after: 1 week

Enable copyback and system PD states.

Reviewed by: jhb
Approved by: avg (mentor)
MFC after: 1 week
X-MFC-After: r214130

Fix compile with -DDEBUG by using the correct mfi_pd_ref union definition
in mfireg.h.

Submitted by: gcooper
Reviewed by: jhb
Approved by: cperciva (mentor)
MFC after: 1 week

Report subcommand handler errors in mfiutil/mptutil so that tools that
invoke the utilities can robustly report errors.

Submitted by: gcooper
Reviewed by: jhb
Approved by: cperciva (mentor)
MFC after: 1 week

Fix typos and spelling mistakes.

Spelling fixes.

Fixed dependencies (make checkdpadd).

Trim empty mergeinfo.

Update the man page for manual section 8

Approved by: re

Update the man page for FreeBSD 8.0

Approved by: re

Move mfiutil.1 to mfiutil.8 for consistency. Remove superfulous README.

Approved by: re

Fix is 32bit bug missed in testing.

Approved by: re

ntroduce mfiutil, a basic utility for managing LSI SAS-RAID & Dell PERC5/6
controllers. Controller, array, and drive status can be checked, basic
attributes can be changed, and arrays and spares can be created and deleted.
Controller firmware can also be flashed.

This does not replace MegaCLI, found in ports, as that is officially sanctioned
and supported by LSI and includes vastly more functionality. However, mfiutil
is open source and guaranteed to provide basic functionality, which can be
especially useful if you have a problem and can't get MegaCLI to work.

Approved by: re
Obtained from: Yahoo! Inc.