Copy stable/9 to releng/9.3 as part of the 9.3-RELEASE cycle.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

MFC r253639:
Add ieee80211_add_{qos,wpa,rsn}() functions since they are needed by an
OpenBSD driver that is being ported to FreeBSD.

MFC r231187:
Update the 802.11s IE numbers to represent the latest 802.11 amendment
standard.

This update breaks compatibility with older mesh setups but is necessary as
the previous IDs are used by another amendment leading to unexpected results
when trying to associate with an accesspoint using the affected IDs.

Discussed with: re
Tested by: honestqiao at gmail dot com

Copy head to stable/9 as part of 9.0-RELEASE release cycle.

Approved by: re (implicit)

Add a new mgmt subtype "ACTION NO ACK" defined in 802.11n-2009, while here
clean up parts of the *_recv_mgmt() functions.
- make sure appropriate counters are bumped and debug messages are printed
- order the unhandled subtypes by value and add a few missing ones
- fix some whitespace nits
- remove duplicate code in adhoc_recv_mgmt()
- remove a useless comment, probably left in while c&p

Update 802.11s mesh support to draft 3.03. This includes a revised frame
format for peering and changes to the PERR frames.
Note that this is incompatible with the previous code.

Reviewed by: sam
MFC after: 1 week

Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.

Authentication and encryption are not implemented.

There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).

A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.

Drivers that support mesh networks right now are: ath, ral and mwl.

More information at: http://wiki.freebsd.org/WifiMesh

Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.

Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.

Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s

Correct ieee80211_gettid:
o don't increment extracted tid, this was a vestige of IEEE80211_NONQOS_TID
being defined as 0 (w/ real tid's +1)
o handle 4-address frames (add IEEE80211_IS_DSTODS to check if an 802.11
header is DSTODS)

Submitted by: cbzimmer
Reviewed by: avatar

o correct/add action frame categories
o add IEEE80211_STATUS_MISSING_HT_CAPS, added in 11n D3.0 spec

o station mode channel switch support
o IEEE80211_IOC_CHANSWITCH fixups:
- restrict to hostap vaps
- return EOPNOTSUPP instead of EINVAL when applied to !hostap vap
or to a vap w/o 11h enabled
- interpret count of 0 to mean cancel the current CSA

Reviewed by: rpaulo, avatar

add block ack frame id

promote ieee80211_seq typedef

o move tdma+superg protocol defs out of public view
o add #ifdef _KERNEL to superg+tdma include files so they can be used
by user code to get the protocol defs

Minor cleanups of tdma protocol handling:
o break out version-related code to simplify rev'ing the protocol
o add parameter validation macros so checks that appear multiple places
are consistent (and easy to change)
o add protocol version check when looking for a scan candidate
o improve scan debug output format
o rewrite beacon update handling to calculate a bitmask of changed values
and pass that down through the driver callback so drivers can optimize work
o do slot bounds check before use when parsing received beacons

o make %b msg bit defines public (to user apps too)
o rename IEEE80211_C_CRYPTO_BITS to IEEE80211_CRYPTO_BITS

TDMA support for long distance point-to-point links using ath devices:
o add net80211 support for a tdma vap that is built on top of the
existing adhoc-demo support
o add tdma scheduling of frame transmission to the ath driver; it's
conceivable other devices might be capable of this too in which case
they can make use of the 802.11 protocol additions etc.
o add minor bits to user tools that need to know: ifconfig to setup and
configure, new statistics in athstats, and new debug mask bits

While the architecture can support >2 slots in a TDMA BSS the current
design is intended (and tested) for only 2 slots.

Sponsored by: Intel

o fix spelling of EOSP
o correct SMPS values

o fix BAR definitions
o add 11e reason codes

add WPS oui

Submitted by: "Chuck Tuffli" <chuck@tuffli.net>
MFC after: 3 days

add PLCP service bit definitions

Multi-bss (aka vap) support for 802.11 devices.

Note this includes changes to all drivers and moves some device firmware
loading to use firmware(9) and a separate module (e.g. ral). Also there
no longer are separate wlan_scan* modules; this functionality is now
bundled into the wlan module.

Supported by: Hobnob and Marvell
Reviewed by: many
Obtained from: Atheros (some bits)

correct TID_TO_WME_AC handling of BE

MFC after: 3 days

correct MIMO power save action frame format;
this one really is from the D2.04 spec

MFC after: 3 days

sync 11n support with vap code base; many changes based on interop
testing with all major vendors

MFC after: 1 week

Miscellaneous fixups to 802.11 defs:
o update 11n definitions to D2.0 spec
o add IEEE80211_CAPINFO_SPECTRUM_MGMT for DFS support
o add CSA ie definition for DFS support
o purge some unused definitions
o correct 802.11 reason and status codes
o correct reason code returned when a sta tries to associate to an
ap operating with WPA/RSN but without a WPA/RSN ie

Reviewed by: thompsa, avatar
Approved by: re (blanket wireless)

Update 802.11 wireless support:
o major overhaul of the way channels are handled: channels are now
fully enumerated and uniquely identify the operating characteristics;
these changes are visible to user applications which require changes
o make scanning support independent of the state machine to enable
background scanning and roaming
o move scanning support into loadable modules based on the operating
mode to enable different policies and reduce the memory footprint
on systems w/ constrained resources
o add background scanning in station mode (no support for adhoc/ibss
mode yet)
o significantly speedup sta mode scanning with a variety of techniques
o add roaming support when background scanning is supported; for now
we use a simple algorithm to trigger a roam: we threshold the rssi
and tx rate, if either drops too low we try to roam to a new ap
o add tx fragmentation support
o add first cut at 802.11n support: this code works with forthcoming
drivers but is incomplete; it's included now to establish a baseline
for other drivers to be developed and for user applications
o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates
prepending mbufs for traffic generated locally
o add support for Atheros protocol extensions; mainly the fast frames
encapsulation (note this can be used with any card that can tx+rx
large frames correctly)
o add sta support for ap's that beacon both WPA1+2 support
o change all data types from bsd-style to posix-style
o propagate noise floor data from drivers to net80211 and on to user apps
o correct various issues in the sta mode state machine related to handling
authentication and association failures
o enable the addition of sta mode power save support for drivers that need
net80211 support (not in this commit)
o remove old WI compatibility ioctls (wicontrol is officially dead)
o change the data structures returned for get sta info and get scan
results so future additions will not break user apps
o fixed tx rate is now maintained internally as an ieee rate and not an
index into the rate set; this needs to be extended to deal with
multi-mode operation
o add extended channel specifications to radiotap to enable 11n sniffing

Drivers:
o ath: add support for bg scanning, tx fragmentation, fast frames,
dynamic turbo (lightly tested), 11n (sniffing only and needs
new hal)
o awi: compile tested only
o ndis: lightly tested
o ipw: lightly tested
o iwi: add support for bg scanning (well tested but may have some
rough edges)
o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data
o wi: lightly tested

This work is based on contributions by Atheros, kmacy, sephe, thompsa,
mlaier, kevlo, and others. Much of the scanning work was supported by
Atheros. The 11n work was supported by Marvell.

copyright updates:
o update to include 2007
o switch back to a 2-clause bsd-only license

Reviewed by: onoe

Fix packing on the country band descriptor. No real change since this
is unused.

Reviewed by: sam

o move min/max beacon interval and dtim period to public location
o add min/max beacon miss threshold settings
o delete IEEE80211_SWBMISS_THRESHOLD, it was never used

MFC after: 2 weeks

o add IEEE80211_FRAG_DEFAULT
o move default settings for RTS and frag thresholds to ieee80211_var.h

move AID implementation defines from the protocol definitions to
where they are used

remove netbsd rcsid lines; they are way out of date and we appear to be
diverging too much to make tracking these files worthwhile

bump copyright for 2005

Update 802.11 support; too much new functionality to fully describe
here but it includes completed 802.11g, WPA, 802.11i, 802.1x, WME/WMM,
AP-side power-save, crypto plugin framework, authenticator plugin framework,
and access control plugin frameowrk.

add definitions for WME, WPA (and WPA2), and miscellaneous other stuff
that's coming soon

Obtained from: madwifi

Handle SIOCSIFMTU ioctl directly so we can apply 802.11-specific bounds.
Note that the min is actually constrained to IF_MINMTU by the if layer.

add definitions for various control frames and a minimum-sized frame that
we use to define IEEE80211_MIN_LEN; the minimal length for frames drivers
may pass up into the 802.11 layer

revise copyright notices per discussion with Atsushi Onoe <onoe@sm.sony.co.jp>

new 802.11 layer:

o code reorg (relative to old netbsd-derived code) for future growth
o drivers now specify available channels and rates and 802.11 layer handles
almost all ifmedia actions
o multi-mode support for 11a/b/g devices
o 11g protocol additions (incomplete)
o new element id additions (for other than 11g)
o node/station table redone for proper locking and to eliminate driver
incestuousness
o split device flags and capabilities to reduce confusion and provide room
for expansion
o incomplete power management infrastructure (need to revisit)
o incomplete hooks for software retry
o more...