Copy stable/9 to releng/9.3 as part of the 9.3-RELEASE cycle.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

MFC r246616 and r246759:

- Move scratch data from the USB bus structure to the USB device
structure so that simultaneous access cannot happen. Protect scratch
area using the enumeration lock.
- Reduce stack usage in usbd_transfer_setup() by moving some big stack
members to the scratch area. This saves around 200 bytes of stack.
- Fix a whitespace.
- Protect control requests using the USB device enumeration lock.
- Make sure all callers of usbd_enum_lock() check the return value.
- Remove the control transfer specific lock.
- Bump the FreeBSD version number, hence external USB modules may need
to be recompiled due to a USB device structure change.

MFC r227706, r227748, r227749 and r228234:
Simplify the usb_pause_mtx() function by factoring out the generic parts
to the kernel's pause() function. The pause() function can now be used
when cold != 0. Also assert that the timeout in system ticks must be
greater or equal to zero.

MFC r227701, r227847 and r227849:
Move the device_delete_all_children() function from usb_util.c
to kern/subr_bus.c. Simplify this function so that it no longer
depends on malloc() to execute. Rename device_delete_all_children()
into device_delete_children(). Identify a few other places where
it makes sense to use device_delete_children().

Copy head to stable/9 as part of 9.0-RELEASE release cycle.

Approved by: re (implicit)

Remove unneeded includes of <sys/linker_set.h>. Other headers that use
it internally contain nested includes.

Reviewed by: bde

Purge mergeinfo from files that were temporarily renamed while USB2 was
imported into the tree alongside USB.

Approved by: re (mergeinfo blanket)

- Make struct usb_xfer opaque so that drivers can not access the internals
- Reduce the number of headers needed for a usb driver, the common case is just usb.h and usbdi.h

s/usb2_/usb_|usbd_/ on all function names for the USB stack.

Remove usb2_cv_* and just use the kernel condvar implementation, it was needed
earlier since condition variables didnt work with Giant but this was fixed 10
months ago.

s/usb2_/usb_/ on all typedefs for the USB stack.

s/usb2_/usb_/ on all C structs for the USB stack.

Allocate the usb serial, manufacturer and product strings rather than use char
arrays in the usb_device struct. This also eliminates USB_HAVE_STRINGS.

Remove pointeless mergeinfo that crept in from r190633.

Implement an ipfw action to reassemble ip packets: reass.

Integrate user/mav/ata branch:

Add ch_suspend/ch_resume methods for PCI controllers and implement them
for AHCI. Refactor AHCI channel initialization according to it.

Fix Port Multipliers operation. It is far from perfect yet, but works now.
Tested with JMicron JMB363 AHCI + SiI 3726 PMP pair.
Previous version was also tested with SiI 4726 PMP.

Hardware sponsored by: Vitsch Electronics / VEHosting.nl

Fix compile with USB_HAVE_BUSDMA/USB_HAVE_UGEN/USB_HAVE_STRINGS.

Submitted by: Hans Petter Selasky

MFp4 //depot/projects/usb@159446

Remove unused and depreciated function: usb2_get_devid().

Submitted by: Hans Petter Selasky

MFp4 //depot/projects/usb@159392

Add ifdefs for making parts of usb conditional.

Submitted by: Hans Petter Selasky

MFp4 //depot/projects/usb @159430

- Move tunable defines into usb_core.h and dependancy towards usb_defs.h
- Leave hardcoded defines in "usb_defs.h".
- Allow overriding all tunable defines.
- Add more customisable typedefs.
- Correct maximum device number.

Submitted by: Hans Petter Selasky

Move the new USB stack into its new home.

MFp4 //depot/projects/usb; 157069, 157429, 157430

- Change "usb2_pause_mtx" so that it takes the timeout value in ticks
- Factor out USB ethernet and USB serial driver specific control request.
- USB process naming cleanup.

Submitted by: Hans Petter Selasky

Remove superfluous return statements from the end of void functions.

src/sys/dev/usb2/controller/uss820dci_pccard.c
src/sys/dev/usb2/core/usbdevs
src/sys/dev/usb2/include/urio2_ioctl.h
src/sys/dev/usb2/storage/ustorage2_fs.h

These files are not used any more.

src/usr.sbin/Makefile
src/etc/mtree/BSD.include.dist
src/include/Makefile
src/lib/Makefile
src/share/man/man7/hier.7
src/share/mk/bsd.libnames.mk
src/etc/mtree/BSD.include.dist

Make "usbconfig" and "libusb20" a part of the default build.

src/sys/dev/usb/rio500_usb.h
src/sys/dev/usb2/storage/urio2.c

Use common include file.

src/sys/dev/usb2/bluetooth/ng_ubt2.c

Make USB bluetooth depend on "ng_hci" module.

src/sys/dev/usb2/controller/ehci2.c
src/sys/dev/usb2/controller/ehci2.h

Patches for Marvell EHCI.

src/sys/dev/usb2/core/usb2_busdma.c

Bugfix for 64-bit platforms. Need to unload the previously loaded DMA
map and some cleanup regarding some corner cases.

src/sys/dev/usb2/core/usb2_core.h
src/sys/dev/usb2/core/usb2_dev.c
src/sys/dev/usb2/core/usb2_dev.h

Bugfix for libusb filesystem interface.

New feature: Add support for filtering device data at the expense of the
userland process.

Add some more comments.

Some minor code styling.

Remove unused function, usb2_fifo_get_data_next().

Fix an issue about "fifo_index" being used instead of "ep_index".

src/sys/dev/usb2/core/usb2_device.c
src/sys/dev/usb2/core/usb2_generic.c

Bugfix for Linux USB compat layer. Do not free non-generic FIFOs when
doing an alternate setting.

Cleanup USB IOCTL and USB reference handling.
Fix a corner case where USB-FS was left initialised after
setting a new configuration or alternate setting.

src/sys/dev/usb2/core/usb2_hub.c

Improvement: Check all USB HUB ports by default at least one time.

src/sys/dev/usb2/core/usb2_request.c

Bugfix: Make sure destination ASCII string is properly zero terminated
in all cases.

Improvement: Skip invalid characters instead of replacing with a dot.

src/sys/dev/usb2/core/usb2_util.c
src/sys/dev/usb2/image/uscanner2.c

Spelling.

src/sys/dev/usb2/include/Makefile

Share "usbdevs" with the old USB stack.

src/sys/dev/usb2/include/usb2_devid.h
src/sys/dev/usb2/include/usb2_devtable.h

Regenerate files.

Alfred: Please fix the RCS tag at the top.

src/sys/dev/usb2/include/usb2_ioctl.h

Fix compilation of "kdump".

src/sys/dev/usb2/serial/ubsa2.c
src/sys/dev/usb2/serial/ugensa2.c

Remove device ID's which will end up in a new 3G driver.

src/sys/dev/usb2/sound/uaudio2.c

Correct a debug printout.

src/sys/dev/usb2/storage/umass2.c

Sync with old USB stack.

src/lib/libusb20/libusb20.3

Add more documentation.

src/lib/libusb20/libusb20.c

Various bugfixes and improvements.

src/usr.sbin/usbconfig/dump.c
src/usr.sbin/usbconfig/usbconfig.c

New commands for dumping strings and doing custom USB requests from
the command line.

Remove keyword requirements from generated files:
"head/sys/dev/usb2/include/usb2_devid.h"
"head/sys/dev/usb2/include/usb2_devtable.h"

Bring in USB4BSD, Hans Petter Selasky rework of the USB stack
that includes significant features and SMP safety.

This commit includes a more or less complete rewrite of the *BSD USB
stack, including Host Controller and Device Controller drivers and
updating all existing USB drivers to use the new USB API:

1) A brief feature list:

- A new and mutex enabled USB API.

- Many USB drivers are now running Giant free.

- Linux USB kernel compatibility layer.

- New UGEN backend and libusb library, finally solves the "driver
unloading" problem. The new BSD licensed libusb20 library is fully
compatible with libusb-0.1.12 from sourceforge.

- New "usbconfig" utility, for easy configuration of USB.

- Full support for Split transactions, which means you can use your
full speed USB audio device on a high speed USB HUB.

- Full support for HS ISOC transactions, which makes writing drivers
for various HS webcams possible, for example.

- Full support for USB on embedded platforms, mostly cache flushing
and buffer invalidating stuff.

- Safer parsing of USB descriptors.

- Autodetect of annoying USB install disks.

- Support for USB device side mode, also called USB gadget mode,
using the same API like the USB host side. In other words the new
USB stack is symmetric with regard to host and device side.

- Support for USB transfers like I/O vectors, means more throughput
and less interrupts.

- ... see the FreeBSD quarterly status reports under "USB project"

2) To enable the driver in the default kernel build:

2.a) Remove all existing USB device options from your kernel config
file.

2.b) Add the following USB device options to your kernel configuration
file:

# USB core support
device usb2_core

# USB controller support
device usb2_controller
device usb2_controller_ehci
device usb2_controller_ohci
device usb2_controller_uhci

# USB mass storage support
device usb2_storage
device usb2_storage_mass

# USB ethernet support, requires miibus
device usb2_ethernet
device usb2_ethernet_aue
device usb2_ethernet_axe
device usb2_ethernet_cdce
device usb2_ethernet_cue
device usb2_ethernet_kue
device usb2_ethernet_rue
device usb2_ethernet_dav

# USB wireless LAN support
device usb2_wlan
device usb2_wlan_rum
device usb2_wlan_ral
device usb2_wlan_zyd

# USB serial device support
device usb2_serial
device usb2_serial_ark
device usb2_serial_bsa
device usb2_serial_bser
device usb2_serial_chcom
device usb2_serial_cycom
device usb2_serial_foma
device usb2_serial_ftdi
device usb2_serial_gensa
device usb2_serial_ipaq
device usb2_serial_lpt
device usb2_serial_mct
device usb2_serial_modem
device usb2_serial_moscom
device usb2_serial_plcom
device usb2_serial_visor
device usb2_serial_vscom

# USB bluetooth support
device usb2_bluetooth
device usb2_bluetooth_ng

# USB input device support
device usb2_input
device usb2_input_hid
device usb2_input_kbd
device usb2_input_ms

# USB sound and MIDI device support
device usb2_sound

2) To enable the driver at runtime:

2.a) Unload all existing USB modules. If USB is compiled into the
kernel then you might have to build a new kernel.

2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same
base name like the kernel device option.

Submitted by: Hans Petter Selasky hselasky at c2i dot net
Reviewed by: imp, alfred