#
267654 |
|
19-Jun-2014 |
gjb |
Copy stable/9 to releng/9.3 as part of the 9.3-RELEASE cycle.
Approved by: re (implicit) Sponsored by: The FreeBSD Foundation |
#
267350 |
|
11-Jun-2014 |
hselasky |
MFC r267240: Resolve a deadlock setting the USB configuration index from userspace on USB HUBs by moving the code into the USB explore threads. The deadlock happens because child devices of the USB HUB don't have the expected reference count when called from outside the explore thread. Only the HUB device itself, which the IOCTL interface locks, gets the correct reference count.
Approved by: re, marius @
|
#
261106 |
|
24-Jan-2014 |
hselasky |
MFC r260588 and r260589: - Separate I/O errors from reception of STALL PID. - Implement better error recovery for Transaction Translators, TTs, found in High Speed USB HUBs which translate from High Speed USB into FULL or LOW speed USB. In some rare cases SPLIT transactions might get lost, which might leave the TT in an unknown state. Whenever we detect such an error try to issue either a clear TT buffer request, or if that is not possible reset the whole TT.
|
#
235001 |
|
04-May-2012 |
hselasky |
MFC r234803 and r234961: Add support for Multi-TT mode of modern USB HUBs. This will give you more bandwidth for isochronous FULL speed applications connected through a High Speed HUB.
This patch has been tested with XHCI and EHCI.
|
#
225736 |
|
22-Sep-2011 |
kensmith |
Copy head to stable/9 as part of 9.0-RELEASE release cycle.
Approved by: re (implicit)
|
#
213435 |
|
04-Oct-2010 |
hselasky |
This commit adds full support for USB 3.0 devices in host and device mode in the USB core. The patch mostly consists of updating the USB HUB code to support USB 3.0 HUBs. This patch also add some more USB controller methods to support more active-alike USB controllers like the XHCI which needs to be informed about various device state events.
USB 3.0 HUBs are not tested yet, due to lack of hardware, but are believed to work.
After this update the initial device descriptor is only read twice when we know that the bMaxPacketSize is too small for a single packet transfer of this descriptor.
Approved by: thompsa (mentor)
|
#
199672 |
|
22-Nov-2009 |
thompsa |
Improve High Speed slot allocation mechanism by moving the computation to the endpoint rather than per xfer and provide functions around get/free of resources.
Submitted by: Hans Petter Selasky
|
#
196219 |
|
14-Aug-2009 |
jhb |
Purge mergeinfo from files that were temporarily renamed while USB2 was imported into the tree alongside USB.
Approved by: re (mergeinfo blanket)
|
#
194230 |
|
14-Jun-2009 |
thompsa |
Fix _USB2_* refernces in the header protection defines.
|
#
194228 |
|
14-Jun-2009 |
thompsa |
s/usb2_/usb_|usbd_/ on all function names for the USB stack.
|
#
193074 |
|
29-May-2009 |
thompsa |
Revert the size_t part of the last commit for the moment, this blows up the USB_ADD_BYTES macro.
|
#
193045 |
|
29-May-2009 |
thompsa |
s/usb2_/usb_/ on all typedefs for the USB stack.
|
#
192984 |
|
28-May-2009 |
thompsa |
s/usb2_/usb_/ on all C structs for the USB stack.
|
#
192499 |
|
20-May-2009 |
thompsa |
- rename usb2_mode to usb_mode [1] - change variable types to use the enum
Submitted by: Hans Petter Selasky [1]
|
#
190754 |
|
05-Apr-2009 |
thompsa |
Provide a better commit log for r190735, forced by making a whitespace change.
Refactor how we interface with the root HUB. This is achieved by making a direct call from usb2_do_request to the host controller for root hub requests, this call will perform the controller specific register read/writes and return the error code.
This cuts out a lot of code in the host controller files and saves one thread per USB bus.
Submitted by: Hans Petter Selasky
|
#
190749 |
|
05-Apr-2009 |
piso |
Remove pointeless mergeinfo that crept in from r190633.
|
#
190735 |
|
05-Apr-2009 |
thompsa |
MFp4 //depot/projects/usb@159922
Refactor how we interface with the root HUB. This cuts around 1200 lines of code totally and saves one thread per USB bus.
Submitted by: Hans Petter Selasky
|
#
190734 |
|
05-Apr-2009 |
thompsa |
MFp4 //depot/projects/usb@159909
- make usb2_power_mask_t 16-bit - remove "usb2_config_sub" structure from "usb2_config". To compensate for this "usb2_config" has a new field called "usb_mode" which select for which mode the current xfer entry is active. Options are: a) Device mode only b) Host mode only (default-by-zero) c) Both modes. This change was scripted using the following sed script: "s/\.mh\././g". - the standard packet size table in "usb_transfer.c" is now a function, hence the code for the function uses less memory than the table itself.
Submitted by: Hans Petter Selasky
|
#
190633 |
|
01-Apr-2009 |
piso |
Implement an ipfw action to reassemble ip packets: reass.
|
#
190581 |
|
30-Mar-2009 |
mav |
Integrate user/mav/ata branch:
Add ch_suspend/ch_resume methods for PCI controllers and implement them for AHCI. Refactor AHCI channel initialization according to it.
Fix Port Multipliers operation. It is far from perfect yet, but works now. Tested with JMicron JMB363 AHCI + SiI 3726 PMP pair. Previous version was also tested with SiI 4726 PMP.
Hardware sponsored by: Vitsch Electronics / VEHosting.nl
|
#
190181 |
|
20-Mar-2009 |
thompsa |
MFp4 //depot/projects/usb @159431,159437,159438
- start using the new USB typedefs in the USB core - Remove usage of USB_ADD_BYTES()
Submitted by: Hans Petter Selasky
|
#
188942 |
|
23-Feb-2009 |
thompsa |
Move the new USB stack into its new home.
|
#
186730 |
|
03-Jan-2009 |
alfred |
Sync with usb4bsd:
src/lib/libusb20/libusb20_desc.c
Make "libusb20_desc_foreach()" more readable.
src/sys/dev/usb2/controller/*.[ch] src/sys/dev/usb2/core/*.[ch]
Implement support for USB power save for all HC's.
Implement support for Big-endian EHCI.
Move Huawei quirks back into "u3g" driver.
Improve device enumeration.
src/sys/dev/usb2/ethernet/*[ch]
Patches for supporting new AXE Gigabit chipset.
src/sys/dev/usb2/serial/*[ch]
Fix IOCTL return code.
src/sys/dev/usb2/wlan/*[ch]
Sync with old USB stack.
Submitted by: hps
|
#
185948 |
|
11-Dec-2008 |
thompsa |
Format and wrap function declarations.
|
#
184610 |
|
04-Nov-2008 |
alfred |
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack that includes significant features and SMP safety.
This commit includes a more or less complete rewrite of the *BSD USB stack, including Host Controller and Device Controller drivers and updating all existing USB drivers to use the new USB API:
1) A brief feature list:
- A new and mutex enabled USB API.
- Many USB drivers are now running Giant free.
- Linux USB kernel compatibility layer.
- New UGEN backend and libusb library, finally solves the "driver unloading" problem. The new BSD licensed libusb20 library is fully compatible with libusb-0.1.12 from sourceforge.
- New "usbconfig" utility, for easy configuration of USB.
- Full support for Split transactions, which means you can use your full speed USB audio device on a high speed USB HUB.
- Full support for HS ISOC transactions, which makes writing drivers for various HS webcams possible, for example.
- Full support for USB on embedded platforms, mostly cache flushing and buffer invalidating stuff.
- Safer parsing of USB descriptors.
- Autodetect of annoying USB install disks.
- Support for USB device side mode, also called USB gadget mode, using the same API like the USB host side. In other words the new USB stack is symmetric with regard to host and device side.
- Support for USB transfers like I/O vectors, means more throughput and less interrupts.
- ... see the FreeBSD quarterly status reports under "USB project"
2) To enable the driver in the default kernel build:
2.a) Remove all existing USB device options from your kernel config file.
2.b) Add the following USB device options to your kernel configuration file:
# USB core support device usb2_core
# USB controller support device usb2_controller device usb2_controller_ehci device usb2_controller_ohci device usb2_controller_uhci
# USB mass storage support device usb2_storage device usb2_storage_mass
# USB ethernet support, requires miibus device usb2_ethernet device usb2_ethernet_aue device usb2_ethernet_axe device usb2_ethernet_cdce device usb2_ethernet_cue device usb2_ethernet_kue device usb2_ethernet_rue device usb2_ethernet_dav
# USB wireless LAN support device usb2_wlan device usb2_wlan_rum device usb2_wlan_ral device usb2_wlan_zyd
# USB serial device support device usb2_serial device usb2_serial_ark device usb2_serial_bsa device usb2_serial_bser device usb2_serial_chcom device usb2_serial_cycom device usb2_serial_foma device usb2_serial_ftdi device usb2_serial_gensa device usb2_serial_ipaq device usb2_serial_lpt device usb2_serial_mct device usb2_serial_modem device usb2_serial_moscom device usb2_serial_plcom device usb2_serial_visor device usb2_serial_vscom
# USB bluetooth support device usb2_bluetooth device usb2_bluetooth_ng
# USB input device support device usb2_input device usb2_input_hid device usb2_input_kbd device usb2_input_ms
# USB sound and MIDI device support device usb2_sound
2) To enable the driver at runtime:
2.a) Unload all existing USB modules. If USB is compiled into the kernel then you might have to build a new kernel.
2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same base name like the kernel device option.
Submitted by: Hans Petter Selasky hselasky at c2i dot net Reviewed by: imp, alfred
|