#
267654 |
|
19-Jun-2014 |
gjb |
Copy stable/9 to releng/9.3 as part of the 9.3-RELEASE cycle.
Approved by: re (implicit) Sponsored by: The FreeBSD Foundation |
#
242776 |
|
08-Nov-2012 |
hselasky |
MFC r242523: Allow using the embedded EHCI host controller in Freescale SoCs by adding the missing bits. See ehci_fsl.c for their use.
|
#
229096 |
|
31-Dec-2011 |
hselasky |
MFC r229086, r228483 and r228640: Implement better support for USB controller suspend and resume. Fix some build issues in avr32dci.c
|
#
225736 |
|
22-Sep-2011 |
kensmith |
Copy head to stable/9 as part of 9.0-RELEASE release cycle.
Approved by: re (implicit)
|
#
213869 |
|
14-Oct-2010 |
hselasky |
Revert most of r197682 (EHCI Hardware BUG workaround). Implement proper solution which is to not use the TERMINATE pointer, but rather link to a halted TD. The initial fix was due to a misunderstanding about how the EHCI hardware works. Thanks to Alan Stern for clearing this up. This patch can increase mass storage read performance significantly when the IRQ rate is less than 8000 IRQ/s.
Approved by: thompsa (mentor)
|
#
204632 |
|
03-Mar-2010 |
joel |
The NetBSD Foundation has granted permission to remove clause 3 and 4 from their software.
Obtained from: NetBSD
|
#
203693 |
|
08-Feb-2010 |
thompsa |
Disable the use of the IAAD usb doorbell on NVidia controllers as it can cause the hardware to stall.
Submitted by: Hans Petter Selasky
|
#
199058 |
|
08-Nov-2009 |
thompsa |
Integrate lost interrupts patch from the old USB stack.
Some EHCI chips from VIA / ATI seem to trigger interrupts before writing back the qTD status, or miss signalling occasionally under heavy load. If the host machine is too fast, we can miss transaction completion - when we scan the active list the transaction still seems to be active. This generally exhibits itself as a umass stall that never recovers.
We work around this behaviour by setting up this callback after any softintr that completes with transactions still pending, giving us another chance to check for completion after the writeback has taken place
Submitted by: Alexander Nedotsuko MFC after: 3 days
|
#
198151 |
|
15-Oct-2009 |
thompsa |
Workaround buggy BIOS code in USB regard. By doing the BIOS to OS handover for all host controllers at the same time, we avoid problems where the BIOS will actually write to the USB registers of all the USB host controllers every time we handover one of them, and consequently reset the OS programmed values.
Submitted by: avg Reviewed by: jhb
|
#
196219 |
|
14-Aug-2009 |
jhb |
Purge mergeinfo from files that were temporarily renamed while USB2 was imported into the tree alongside USB.
Approved by: re (mergeinfo blanket)
|
#
193045 |
|
29-May-2009 |
thompsa |
s/usb2_/usb_/ on all typedefs for the USB stack.
|
#
192984 |
|
28-May-2009 |
thompsa |
s/usb2_/usb_/ on all C structs for the USB stack.
|
#
191402 |
|
22-Apr-2009 |
thompsa |
MFp4 //depot/projects/usb@160930
Change the roothub exec functions to take the usb request and data pointers directly rather than placing them on the parent bus struct.
Submitted by: Hans Petter Selasky
|
#
190754 |
|
05-Apr-2009 |
thompsa |
Provide a better commit log for r190735, forced by making a whitespace change.
Refactor how we interface with the root HUB. This is achieved by making a direct call from usb2_do_request to the host controller for root hub requests, this call will perform the controller specific register read/writes and return the error code.
This cuts out a lot of code in the host controller files and saves one thread per USB bus.
Submitted by: Hans Petter Selasky
|
#
190749 |
|
05-Apr-2009 |
piso |
Remove pointeless mergeinfo that crept in from r190633.
|
#
190735 |
|
05-Apr-2009 |
thompsa |
MFp4 //depot/projects/usb@159922
Refactor how we interface with the root HUB. This cuts around 1200 lines of code totally and saves one thread per USB bus.
Submitted by: Hans Petter Selasky
|
#
190633 |
|
01-Apr-2009 |
piso |
Implement an ipfw action to reassemble ip packets: reass.
|
#
190581 |
|
30-Mar-2009 |
mav |
Integrate user/mav/ata branch:
Add ch_suspend/ch_resume methods for PCI controllers and implement them for AHCI. Refactor AHCI channel initialization according to it.
Fix Port Multipliers operation. It is far from perfect yet, but works now. Tested with JMicron JMB363 AHCI + SiI 3726 PMP pair. Previous version was also tested with SiI 4726 PMP.
Hardware sponsored by: Vitsch Electronics / VEHosting.nl
|
#
190174 |
|
20-Mar-2009 |
thompsa |
MFp4 //depot/projects/usb @159430
- Move tunable defines into usb_core.h and dependancy towards usb_defs.h - Leave hardcoded defines in "usb_defs.h". - Allow overriding all tunable defines. - Add more customisable typedefs. - Correct maximum device number.
Submitted by: Hans Petter Selasky
|
#
189496 |
|
07-Mar-2009 |
thompsa |
(re)merge r186415,186416 from the old usb stack;
o add Transaction Translator support (still missing ISOC xfers) o add EHCI_SCFLG_BIGEMMIO flag to force big-endian byte-select to be set in USBMODE o split reset work into new public routine ehci_reset so bus shim drivers can force big-endian byte-select before ehci_init o enable TT and big-endian MMIO o force a reset before ehci_init to get byte-select setup
Also go back to using USB_EHCI_BIG_ENDIAN_DESC at compile time to enable the byteswapping and reduce diffs to the original commits.
This fixes the new USB stack on the Cambria board.
|
#
188942 |
|
23-Feb-2009 |
thompsa |
Move the new USB stack into its new home.
|
#
188409 |
|
09-Feb-2009 |
thompsa |
MFp4 //depot/projects/usb; 157069,157296,157375,157384,157430
- Change "usb2_pause_mtx" so that it takes the timeout value in ticks - USB controller: EHCI High Speed Interrupt endpoint fix. - Fix OHCI and EHCI counting bug when multiple TD's are involved in a short USB transfer and a short packet happens on the non-last TD in the USB transfer frame. - USB process naming cleanup.
Submitted by: Hans Petter Selasky
|
#
187172 |
|
13-Jan-2009 |
thompsa |
MFp4: //depot/projects/usb@155834
Factor out roothub process into the USB bus structure for all USB controller drivers. Essentially I am trying to save some processes on the root HUB and get away from the config thread pradigm. There will be a follow up commit where the root HUB control and interrupt callback will be moved over to run from the roothub process. Total win: 3 processes become 1 for every USB controller.
Submitted by: Hans Petter Selasky
|
#
187170 |
|
13-Jan-2009 |
thompsa |
MFp4: //depot/projects/usb@155820
USB memory usage reduction patch.
Submitted by: Hans Petter Selasky
|
#
186730 |
|
03-Jan-2009 |
alfred |
Sync with usb4bsd:
src/lib/libusb20/libusb20_desc.c
Make "libusb20_desc_foreach()" more readable.
src/sys/dev/usb2/controller/*.[ch] src/sys/dev/usb2/core/*.[ch]
Implement support for USB power save for all HC's.
Implement support for Big-endian EHCI.
Move Huawei quirks back into "u3g" driver.
Improve device enumeration.
src/sys/dev/usb2/ethernet/*[ch]
Patches for supporting new AXE Gigabit chipset.
src/sys/dev/usb2/serial/*[ch]
Fix IOCTL return code.
src/sys/dev/usb2/wlan/*[ch]
Sync with old USB stack.
Submitted by: hps
|
#
185087 |
|
19-Nov-2008 |
alfred |
src/sys/dev/usb2/controller/uss820dci_pccard.c src/sys/dev/usb2/core/usbdevs src/sys/dev/usb2/include/urio2_ioctl.h src/sys/dev/usb2/storage/ustorage2_fs.h
These files are not used any more.
src/usr.sbin/Makefile src/etc/mtree/BSD.include.dist src/include/Makefile src/lib/Makefile src/share/man/man7/hier.7 src/share/mk/bsd.libnames.mk src/etc/mtree/BSD.include.dist
Make "usbconfig" and "libusb20" a part of the default build.
src/sys/dev/usb/rio500_usb.h src/sys/dev/usb2/storage/urio2.c
Use common include file.
src/sys/dev/usb2/bluetooth/ng_ubt2.c
Make USB bluetooth depend on "ng_hci" module.
src/sys/dev/usb2/controller/ehci2.c src/sys/dev/usb2/controller/ehci2.h
Patches for Marvell EHCI.
src/sys/dev/usb2/core/usb2_busdma.c
Bugfix for 64-bit platforms. Need to unload the previously loaded DMA map and some cleanup regarding some corner cases.
src/sys/dev/usb2/core/usb2_core.h src/sys/dev/usb2/core/usb2_dev.c src/sys/dev/usb2/core/usb2_dev.h
Bugfix for libusb filesystem interface.
New feature: Add support for filtering device data at the expense of the userland process.
Add some more comments.
Some minor code styling.
Remove unused function, usb2_fifo_get_data_next().
Fix an issue about "fifo_index" being used instead of "ep_index".
src/sys/dev/usb2/core/usb2_device.c src/sys/dev/usb2/core/usb2_generic.c
Bugfix for Linux USB compat layer. Do not free non-generic FIFOs when doing an alternate setting.
Cleanup USB IOCTL and USB reference handling. Fix a corner case where USB-FS was left initialised after setting a new configuration or alternate setting.
src/sys/dev/usb2/core/usb2_hub.c
Improvement: Check all USB HUB ports by default at least one time.
src/sys/dev/usb2/core/usb2_request.c
Bugfix: Make sure destination ASCII string is properly zero terminated in all cases.
Improvement: Skip invalid characters instead of replacing with a dot.
src/sys/dev/usb2/core/usb2_util.c src/sys/dev/usb2/image/uscanner2.c
Spelling.
src/sys/dev/usb2/include/Makefile
Share "usbdevs" with the old USB stack.
src/sys/dev/usb2/include/usb2_devid.h src/sys/dev/usb2/include/usb2_devtable.h
Regenerate files.
Alfred: Please fix the RCS tag at the top.
src/sys/dev/usb2/include/usb2_ioctl.h
Fix compilation of "kdump".
src/sys/dev/usb2/serial/ubsa2.c src/sys/dev/usb2/serial/ugensa2.c
Remove device ID's which will end up in a new 3G driver.
src/sys/dev/usb2/sound/uaudio2.c
Correct a debug printout.
src/sys/dev/usb2/storage/umass2.c
Sync with old USB stack.
src/lib/libusb20/libusb20.3
Add more documentation.
src/lib/libusb20/libusb20.c
Various bugfixes and improvements.
src/usr.sbin/usbconfig/dump.c src/usr.sbin/usbconfig/usbconfig.c
New commands for dumping strings and doing custom USB requests from the command line.
Remove keyword requirements from generated files: "head/sys/dev/usb2/include/usb2_devid.h" "head/sys/dev/usb2/include/usb2_devtable.h"
|
#
184610 |
|
04-Nov-2008 |
alfred |
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack that includes significant features and SMP safety.
This commit includes a more or less complete rewrite of the *BSD USB stack, including Host Controller and Device Controller drivers and updating all existing USB drivers to use the new USB API:
1) A brief feature list:
- A new and mutex enabled USB API.
- Many USB drivers are now running Giant free.
- Linux USB kernel compatibility layer.
- New UGEN backend and libusb library, finally solves the "driver unloading" problem. The new BSD licensed libusb20 library is fully compatible with libusb-0.1.12 from sourceforge.
- New "usbconfig" utility, for easy configuration of USB.
- Full support for Split transactions, which means you can use your full speed USB audio device on a high speed USB HUB.
- Full support for HS ISOC transactions, which makes writing drivers for various HS webcams possible, for example.
- Full support for USB on embedded platforms, mostly cache flushing and buffer invalidating stuff.
- Safer parsing of USB descriptors.
- Autodetect of annoying USB install disks.
- Support for USB device side mode, also called USB gadget mode, using the same API like the USB host side. In other words the new USB stack is symmetric with regard to host and device side.
- Support for USB transfers like I/O vectors, means more throughput and less interrupts.
- ... see the FreeBSD quarterly status reports under "USB project"
2) To enable the driver in the default kernel build:
2.a) Remove all existing USB device options from your kernel config file.
2.b) Add the following USB device options to your kernel configuration file:
# USB core support device usb2_core
# USB controller support device usb2_controller device usb2_controller_ehci device usb2_controller_ohci device usb2_controller_uhci
# USB mass storage support device usb2_storage device usb2_storage_mass
# USB ethernet support, requires miibus device usb2_ethernet device usb2_ethernet_aue device usb2_ethernet_axe device usb2_ethernet_cdce device usb2_ethernet_cue device usb2_ethernet_kue device usb2_ethernet_rue device usb2_ethernet_dav
# USB wireless LAN support device usb2_wlan device usb2_wlan_rum device usb2_wlan_ral device usb2_wlan_zyd
# USB serial device support device usb2_serial device usb2_serial_ark device usb2_serial_bsa device usb2_serial_bser device usb2_serial_chcom device usb2_serial_cycom device usb2_serial_foma device usb2_serial_ftdi device usb2_serial_gensa device usb2_serial_ipaq device usb2_serial_lpt device usb2_serial_mct device usb2_serial_modem device usb2_serial_moscom device usb2_serial_plcom device usb2_serial_visor device usb2_serial_vscom
# USB bluetooth support device usb2_bluetooth device usb2_bluetooth_ng
# USB input device support device usb2_input device usb2_input_hid device usb2_input_kbd device usb2_input_ms
# USB sound and MIDI device support device usb2_sound
2) To enable the driver at runtime:
2.a) Unload all existing USB modules. If USB is compiled into the kernel then you might have to build a new kernel.
2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same base name like the kernel device option.
Submitted by: Hans Petter Selasky hselasky at c2i dot net Reviewed by: imp, alfred
|