Copy stable/9 to releng/9.3 as part of the 9.3-RELEASE cycle.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

MFC r245243, r245274, r245276, r245434, r245441, r245448, r245467,
r245468, r245517, r245518, r245520, r245567, r245933, r245935, r245936,
r245937, r246093, r246385, r246575, r247062, r247122, r247289, r247291,
r247347, r247355, and r241733.

Note that TCP_OFFLOAD is not enabled in 9 yet and so some of these MFCs
don't really affect functionality. But they do help future MFCs
(related to TCP_OFFLOAD or not) by minimizing diffs with the driver in
head.

r245243:
cxgbe(4): updates to the configuration file that controls how hardware
resources are partitioned.

- Reduce the number of virtual interfaces reserved for PF4. This leaves
spare room in the source MAC table and allows the driver to setup
filters that rewrite the source MAC address.

- Reduce the number of filters and use the freed up space for the CLIP
(Compressed Local IPv6 addresses) table. This is a prerequisite for
IPv6 TOE support which will follow separately in a series of commits.

r245274:
cxgbe(4): Add functions to help synchronize "slow" operations (those not
on the fast data path) and use them instead of frobbing the adapter lock
and busy flag directly.

Other changes made while reworking all slow operations:
- Wait for the reply to a filter request (add/delete). This guarantees
that the operation is complete by the time the ioctl returns.
- Tidy up the tid_info structure.
- Do not allow the tx queue size to be set to something that's not a
power of 2.

r245276:
Overhaul the stid allocator so that it can be used for IPv6 servers
too. The entry for an IPv6 server in the TCAM takes up the equivalent
of two ordinary stids and must be properly aligned too.

r245434:
cxgbe(4): Updates to the hardware L2 table management code.

- Add full support for IPv6 addresses.

- Read the size of the L2 table during attach. Do not assume that PCIe
physical function 4 of the card has all of the table to itself.

- Use FNV instead of Jenkins to hash L3 addresses and drop the private
copy of jhash.h from the driver.

r245441:
cxgbe/tom: Miscellaneous updates for TOE+IPv6 support (more to follow).

- Teach find_best_mtu_idx() to deal with IPv6 endpoints.

- Install correct protosw in offloaded TCP/IPv6 sockets when DDP is
enabled.

- Move set_tcp_ddp_ulp_mode to t4_tom.c so that t4_tom.h can be included
without having to drag in t4_msg.h too. This was bothering the iWARP
driver for some reason.

r245448:
cxgbe/tom: Basic CLIP table management.

This is the Compressed Local IPv6 table on the chip. To save space, the
chip uses an index into this table instead of a full IPv6 address in
some of its hardware data structures.

For now the driver fills this table with all the local IPv6 addresses
that it sees at the time the table is initialized. I'll improve this
later so that the table is updated whenever new IPv6 addresses are
configured or existing ones deleted.

r245467:
cxgbe/tom: Add support for fully offloaded TCP/IPv6 connections (active open).

r245468:
cxgbe/tom: Add support for fully offloaded TCP/IPv6 connections (passive open).

r245517:
cxgbe: Fix the for_each_foo macros -- the last argument should not share
its name with any member of struct sge.

r245518:
cxgbe: Do a more thorough job in the CLEAR_STATS ioctl.

r245520:
Allow "ivlan" (inner VLAN) to be used as an alias for "vlan" when
specifying match criteria. "vlan" continues to be valid here, and it
continues to be valid when deleting, rewriting, inserting, or stacking
an 802.1q tag to a matching packet.

r245567:
cxgbe: Make the for_each macros safer to use by turning them
into a single statement each.

r245933:
cxgbe/tom: List IFCAP_TOE6 as supported now that all the required pieces
are in place. You still have to enable it explicitly, after loading the
t4_tom KLD.

r245935:
Add a couple of missing error codes. Treat CPL_ERR_KEEPALV_NEG_ADVICE as
negative advice and not a fatal error.

r245936:
Force the 404-BT card (4 x 1G) to use the "uwire" configuration file.

r245937:
Install an extra hold on the newly allocated synq entry so that it
cannot be freed while do_pass_accept_req is running. This closes a race
where do_pass_establish on another CPU (the driver chose a different
queue for the new tid) expands the synq entry into a full PCB and then
releases the only hold on it, all while do_pass_accept_req is still
running.

r246093:
Provide a statistic to track the number of drops in each of the port's
txq's buf_ring. The aggregate for all the queues of a port is already
provided in ifnet->if_snd.ifq_drops.

r246385:
Busy-wait when cold.

r246575:
Do not hold locks around hardware context reads.

r247062:
cxgbe(4): Assume that CSUM_TSO in the transmit path implies CSUM_IP and
CSUM_TCP too. They are all set explicitly by the kernel usually.

r247122:
cxgbe(4): Add sysctls to extract debug information from the chip:

dev.t4nex.X.misc.cim_la logic analyzer dump
dev.t4nex.X.misc.cim_qcfg queue configuration
dev.t4nex.X.misc.cim_ibq_xxx inbound queues
dev.t4nex.X.misc.cim_obq_xxx outbound queues

r247289:
cxgbe(4): Update firmware to 1.8.4.0.

r247291:
cxgbe(4): Ask the card's firmware to pad up tiny CPLs by encapsulating
them in a firmware message if it is able to do so. This works out
better for one of the FIFOs in the chip.

r247347:
cxgbe(4): Consider all the API versions of the interfaces exported by
the firmware (instead of just the main firmware version) when evaluating
firmware compatibility. Document the new "hw.cxgbe.fw_install" knob
being introduced here.

This should fix kern/173584 too. Setting hw.cxgbe.fw_install=2 will
mostly do what was requested in the PR but it's a bit more intelligent
in that it won't reinstall the same firmware repeatedly if the knob is
left set.

r247355:
cxgbe(4): Report unusual out of band errors from the firmware.

r241733 (by ed@):
Prefer __containerof() over __member2struct().

The former works better with qualifiers, but also properly type checks
the input pointer.

MFC r244551, r244580.

r244551:
cxgbe(4): must hold a write-lock on the table while allocating an L2
entry for switching.

r244580:
cxgbe(4): Add support for the T440-LP-CR card. This is the 4x10G low
profile card with a QSFP+ transceiver.

MFC r237832, r237436, r237439, r237463, r237512, r237587, r237799,
r237819, r237831.

r237832:
cxgb(4): IPv6 rx/tx hw checksum, IPv6 TSO and LRO too.

r237436:
cxgbe(4): update to firmware interface 1.5.2.0; updates to shared code.

r237439:
Do not read registers with read side effects while performing a register
dump for cxgbetool.

r237463:
Do not allocate extra vectors when adapter is not TOE
capable (or toecaps have been disallowed by the user).

r237512:
Better way to determine the status page length and rx pad boundary.

r237587:
Allow cxgbe(4) running within a VM to attach to its devices that have been
exported via PCI passthrough.

r237799:
cxgbe(4): support for IPv6 hardware checksumming (rx and tx).

r237819:
cxgbe(4): support for IPv6 TSO and LRO.

r237831:
- Assign (don't OR) the CSUM_XXX bits to csum_flags in the rx checksum code.
- Fix TSO/TSO4 mixup.
- Add IFCAP_LINKSTATE to the available/enabled capabilities.

Backport just the sys/{dev,modules}/cxgb{,e}/ parts of r237263, and then
disable the TOE and iWARP modules in the Makefiles (they won't compile
without the rest of r237263).

This reduces diffs between the cxgb/cxgbe drivers in head and 9 and
makes it easy to MFC other fixes to 9.

MFC r231115:
cxgbe: reduce diffs with other branches.

MFC r228491, r228561, r228594.

r228491:
Do not clobber the ingress queue's congestion setting.

r228561:
Many updates to cxgbe(4)

- Device configuration via plain text config file. Also able to operate
when not attached to the chip as the master driver.

- Generic "work request" queue that serves as the base for both ctrl and
ofld tx queues.

- Generic interrupt handler routine that can process any event on any
kind of ingress queue (via a dispatch table).

- A couple of new driver ioctls. cxgbetool can now install a firmware
to the card ("loadfw" command) and can read the card's memory
("memdump" and "tcb" commands).

- Lots of assorted information within dev.t4nex.X.misc.* This is
primarily for debugging and won't show up in sysctl -a.

- Code to manage the L2 tables on the chip.

- Updates to cxgbe(4) man page to go with the tunables that have changed.

- Updates to the shared code in common/

- Updates to the driver-firmware interface (now at fw 1.4.16.0)

r228594:
Catch up with new driver ioctls in cxgbe.

Copy head to stable/9 as part of 9.0-RELEASE release cycle.

Approved by: re (implicit)

L2 table code. This is enough to get the T4's switch + L2 rewrite
filters working. (All other filters - switch without L2 info rewrite,
steer, and drop - were already fully-functional).

Some contrived examples of "switch" filters with L2 rewriting:

# cxgbetool t4nex0 iport 0 dport 80 action switch vlan +9 eport 3
Intercept all packets received on physical port 0 with TCP port 80 as
destination, insert a vlan tag with VID 9, and send them out of port 3.

# cxgbetool t4nex0 sip 192.168.1.1/32 ivlan 5 action switch \
vlan =9 smac aa:bb:cc:dd:ee:ff eport 0
Intercept all packets (received on any port) with source IP address
192.168.1.1 and VLAN id 5, rewrite the VLAN id to 9, rewrite source mac
to aa:bb:cc:dd:ee:ff, and send it out of port 0.

MFC after: 1 week