Copy stable/9 to releng/9.3 as part of the 9.3-RELEASE cycle.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

Merge r254263:

Update PCI drivers to no longer look at the MEMIO-enabled bit in the PCI
command register. The lazy BAR allocation code in FreeBSD sometimes
disables this bit when it detects a range conflict, and will re-enable
it on demand when a driver allocates the BAR. Thus, the bit is no longer
a reliable indication of capability, and should not be checked. This
results in the elimination of a lot of code from drivers, and also gives
the opportunity to simplify a lot of drivers to use a helper API to set
the busmaster enable bit.

This changes fixes some recent reports of disk controllers and their
associated drives/enclosures disappearing during boot.

Candidate for 9.2

Submitted by: jhb
Reviewed by: jfv, marius, adrian, achim

MFC: r227309 (partial)

Mark all SYSCTL_NODEs static that have no corresponding SYSCTL_DECLs.

The SYSCTL_NODE macro defines a list that stores all child-elements of
that node. If there's no SYSCTL_DECL macro anywhere else, there's no
reason why it shouldn't be static.

Copy head to stable/9 as part of 9.0-RELEASE release cycle.

Approved by: re (implicit)

Update d_mmap() to accept vm_ooffset_t and vm_memattr_t.

This replaces d_mmap() with the d_mmap2() implementation and also
changes the type of offset to vm_ooffset_t.

Purge d_mmap2().

All driver modules will need to be rebuilt since D_VERSION is also
bumped.

Reviewed by: jhb@
MFC after: Not in this lifetime...

Temporarily revert the new-bus locking for 8.0 release. It will be
reintroduced after HEAD is reopened for commits by re@.

Approved by: re (kib), attilio

Make the newbus subsystem Giant free by adding the new newbus sxlock.
The newbus lock is responsible for protecting newbus internIal structures,
device states and devclass flags. It is necessary to hold it when all
such datas are accessed. For the other operations, softc locking should
ensure enough protection to avoid races.

Newbus lock is automatically held when virtual operations on the device
and bus are invoked when loading the driver or when the suspend/resume
take place. For other 'spourious' operations trying to access/modify
the newbus topology, newbus lock needs to be automatically acquired and
dropped.

For the moment Giant is also acquired in some key point (modules subsystem)
in order to avoid problems before the 8.0 release as module handlers could
make assumptions about it. This Giant locking should go just after
the release happens.

Please keep in mind that the public interface can be expanded in order
to provide more support, if there are really necessities at some point
and also some bugs could arise as long as the patch needs a bit of
further testing.

Bump __FreeBSD_version in order to reflect the newbus lock introduction.

Reviewed by: ed, hps, jhb, imp, mav, scottl
No answer by: ariff, thompsa, yongari
Tested by: pho,
G. Trematerra <giovanni dot trematerra at gmail dot com>,
Brandon Gooch <jamesbrandongooch at gmail dot com>
Sponsored by: Yahoo! Incorporated
Approved by: re (ksmith)

Unbreak bktr(4).

Free the memory correctly in the error case

Submitted by: frtzkatz at yahoo.com
Approved by: sam
MFC after: 1 month

Replace all calls to minor() with dev2unit().

After I removed all the unit2minor()/minor2unit() calls from the kernel
yesterday, I realised calling minor() everywhere is quite confusing.
Character devices now only have the ability to store a unit number, not
a minor number. Remove the confusion by using dev2unit() everywhere.

This commit could also be considered as a bug fix. A lot of drivers call
minor(), while they should actually be calling dev2unit(). In -CURRENT
this isn't a problem, but it turns out we never had any problem reports
related to that issue in the past. I suspect not many people connect
more than 256 pieces of the same hardware.

Reviewed by: kib

o break newbus api: add a new argument of type driver_filter_t to
bus_setup_intr()

o add an int return code to all fast handlers

o retire INTR_FAST/IH_FAST

For more info: http://docs.freebsd.org/cgi/getmsg.cgi?fetch=465712+0+current/freebsd-current

Reviewed by: many
Approved by: re@

don't require a buffer if all we are doing is manipulating the GPIO pins...

MFC after: 3 weeks

if we are compiling with smbus support, properly depend upon the iic and
smbus modules, otherwise as a module you can't kldload bktr...

MFC after: 3 days

Remove bus_{mem,p}io.h and related code for a micro-optimization on i386
and amd64. The optimization is a trivial on recent machines.

Reviewed by: -arch (imp, marcel, dfr)

Use BUS_PROBE_DEFAULT for pci probe return value

Remove support for FreeBSD < 4.recent from this driver.

Remove vnode.h and adjust includes to compensate for pollution.

Do the dreaded s/dev_t/struct cdev */
Bump __FreeBSD_version accordingly.

Add missing <sys/module.h> includes

Convert callers to the new bus_alloc_resource_any(9) API.

Submitted by: Mark Santcroos <marks@ripe.net>
Reviewed by: imp, dfr, bde

Device megapatch 4/6:

Introduce d_version field in struct cdevsw, this must always be
initialized to D_VERSION.

Flip sense of D_NOGIANT flag to D_NEEDGIANT, this involves removing
four D_NOGIANT flags and adding 145 D_NEEDGIANT flags.

Device megapatch 1/6:

Free approx 86 major numbers with a mostly automatically generated patch.

A number of strategic drivers have been left behind by caution, and a few
because they still (ab)use their major number.

Use contigmalloc() instead of vm_page_alloc_contig().

Move the bktr(4) <arch>/include/ioctl_{bt848,meteor}.h files to dev/bktr
as these ioctl's aren't MD. This also means they are installed in
/usr/include/dev/bktr now. Also provide compatability wrappers for
where these headers lived in 4.x.

Use a mutex to synchronize the driver top and bottom halves instead of
using critcal_enter() and critical_exit() to attempt to replace spl*()
calls. The critical section was calling selrecord(), which locks an
MTX_DEF mutex, which is not legal in a critical section.

Tested by: Stefan Ehmann <shoesoft@gmx.net> and "make universe"
Approved by: re (scottl)

Use PCIR_BAR(x) instead of PCIR_MAPS.

Glanced over by: imp, gibbs
Tested by: i386 LINT

Use __FBSDID().
Also some minor style cleanups.

Prefer new location of pci include files (which have only been in the
tree for two or more years now), except in a few places where there's
code to be compatible with older versions of FreeBSD.

Add a overhaul of the soundchip initialization for the MSP34xx chipsets
found only many tv-cards.

We currently use more ore less evil hacks (slow_msp_audio sysctl) to
configure the various variants of these chips in order to have
stereo autodetection work. Nevertheless, this doesn't always work
even though it _should_, according to the specs.
This is, for example, the case for some popular Hauppauge models sold
sold in Germany.

However, the Linux driver always worked for me and others. Looking at
the sourcecode you will find that the linux-driver uses a very much
enhanced approach to program the various msp34xx chipset variants,
which is also found in the specs for these chips.

This is a port of the Linux MSP34xx code, written by Gerd Knorr
<kraxel@bytesex.org>, who agreed to re-release his code under a
BSD license for this port.

A new config option "BKTR_NEW_MSP34XX_DRIVER" is added, which is required
to enable the new driver. Otherwise the old code is used.

The msp34xx.c file is diff-reduced to the linux-driver to make later
modifications easier, thus it doesn't follow style(9) in most cases.

Approved by: roger (committing this, no time to test/review),
keichii (code review)

Eliminate mostly unused local variable.

Found by: FlexeLint

- Add vm_paddr_t, a physical address type. This is required for systems
where physical addresses larger than virtual addresses, such as i386s
with PAE.
- Use this to represent physical addresses in the MI vm system and in the
i386 pmap code. This also changes the paddr parameter to d_mmap_t.
- Fix printf formats to handle physical addresses >4G in the i386 memory
detection code, and due to kvtop returning vm_paddr_t instead of u_long.

Note that this is a name change only; vm_paddr_t is still the same as
vm_offset_t on all currently supported platforms.

Sponsored by: DARPA, Network Associates Laboratories
Discussed with: re, phk (cdevsw change)

Gigacommit to improve device-driver source compatibility between
branches:

Initialize struct cdevsw using C99 sparse initializtion and remove
all initializations to default values.

This patch is automatically generated and has been tested by compiling
LINT with all the fields in struct cdevsw in reverse order on alpha,
sparc64 and i386.

Approved by: re(scottl)

Cleanup of the d_mmap_t interface.

- Get rid of the useless atop() / pmap_phys_address() detour. The
device mmap handlers must now give back the physical address
without atop()'ing it.
- Don't borrow the physical address of the mapping in the returned
int. Now we properly pass a vm_offset_t * and expect it to be
filled by the mmap handler when the mapping was successful. The
mmap handler must now return 0 when successful, any other value
is considered as an error. Previously, returning -1 was the only
way to fail. This change thus accidentally fixes some devices
which were bogusly returning errno constants which would have been
considered as addresses by the device pager.
- Garbage collect the poorly named pmap_phys_address() now that it's
no longer used.
- Convert all the d_mmap_t consumers to the new API.

I'm still not sure wheter we need a __FreeBSD_version bump for this,
since and we didn't guarantee API/ABI stability until 5.1-RELEASE.

Discussed with: alc, phk, jake
Reviewed by: peter
Compile-tested on: LINT (i386), GENERIC (alpha and sparc64)
Runtime-tested on: i386

Fix a panic unloading the bktr driver when devfs is in use.
PR: kern/36413

Be consistent about "static" functions: if the function is marked
static in its prototype, mark it static at the definition too.

Inspired by: FlexeLint warning #512

Remove abuse of NBKTR - this was always a NOP on freebsd. We never
compiled this stuff if NBKTR was zero.

Remove __FreeBSD__ version abuse, also de-orbit support for FreeBSD 2
and FreeBSD 3.

Fix bktr and pcf compilation with LINT

Major rework of the iicbus/smbus framework:

- VIA chipset SMBus controllers added
- alpm driver updated
- Support for dynamic modules added
- bktr FreeBSD smbus updated but not tested
- cleanup

Remove __P.

Don't call cdevsw_add().

KSE Milestone 2
Note ALL MODULES MUST BE RECOMPILED
make the kernel aware that there are smaller units of scheduling than the
process. (but only allow one thread per process at this time).
This is functionally equivalent to teh previousl -current except
that there is a thread associated with each process.

Sorry john! (your next MFC will be a doosie!)

Reviewed by: peter@freebsd.org, dillon@freebsd.org

X-MFC after: ha ha ha ha

Send the remains (such as I have located) of "block major numbers" to
the bit-bucket.

select() DKI is now in <sys/selinfo.h>.

Add missing 'unit' code

Submitted by: Brad L. Chisholm <blc@bsdwins.com>

Update to driver 2.17
Fixes bugs in devfs when unloading and reloading
Syncs with NetBSD changes

Submitted by: Alexander Langer <alex@big.endian.de>
Submitted by: Thomas Klausner <wiz@netbsd.org>
Submitted by: Daniel O'Connor" <doconnor@gsoft.com.au>

Remove unneeded #include <machine/clock.h>

Add MODULE_VERSION and MODULE_DEPENDS to make the bktr module load the
bktr_mem module

Update to driver 2.15.
Main change is the addition of the bktr_mem module.

This holds onto the bktr driver's contiguously allocated memory
when the bktr driver is unloaded and reloaded.

This has to be done because it is virtually impossible to get
contiguous memory once a system is running.

Also tidied up the use of SMBUS, added a new Hauppauge tuner type (0x2c)
and a new Flyvideo vendor ID.

Replace previous change by a move of a #include since something else
#includes "smbus.h". There is still some bogus (but harmless) stuff
here surrounding the #include <sys/bus.h> includes here and elsewhere in
the bktr code.

If we are going to test NSMBUS, we had better #include the file that
defines it. This creates more warnings rather than less though. These
had gone undetected until now. :-(

Avoid the modules madness I inadvertently introduced by making the
cloning infrastructure standard in kern_conf. Modules are now
the same with or without devfs support.

If you need to detect if devfs is present, in modules or elsewhere,
check the integer variable "devfs_present".

This happily removes an ugly hack from kern/vfs_conf.c.

This forces a rename of the eventhandler and the standard clone
helper function.

Include <sys/eventhandler.h> in <sys/conf.h>: it's a helper #include
like <sys/queue.h>

Remove all #includes of opt_devfs.h they no longer matter.

Fix newbus resource allocations

PR: kern/18744
Submitted by: Alexander Langer <alex@cichlids.com>

Remove all traces of Julians DEVFS (incl from kern/subr_diskslice.c)

Remove old DEVFS support fields from dev_t.

Make uid, gid & mode members of dev_t and set them in make_dev().

Use correct uid, gid & mode in make_dev in disk minilayer.

Add support for registering alias names for a dev_t using the
new function make_dev_alias(). These will show up as symlinks
in DEVFS.

Use makedev() rather than make_dev() for MFSs magic devices to prevent
DEVFS from noticing this abuse.

Add a field for DEVFS inode number in dev_t.

Add new DEVFS in fs/devfs.

Add devfs cloning to:
disk minilayer (ie: ad(4), sd(4), cd(4) etc etc)
md(4), tun(4), bpf(4), fd(4)

If DEVFS add -d flag to /sbin/inits args to make it mount devfs.

Add commented out DEVFS to GENERIC

Update to driver 2.14. Adds new Tuner types for Hauppauge WinTV cards

Update to driver 2.13.
This merges in changes from NetBSD which ensure bktr0
(actually bktr%d) is printed at the start of any output lines.

Submitted by: Thomas Klausner <wiz@danbala.ifoer.tuwien.ac.at>

Use the correct register names. s/PCI_MAP_REG_START/PCIR_MAPS/

Fix typo in interrupt handling code and fix bug in setting of adelay

Update to driver 2.11.
Driver now compiles on FreeBSD/Alpha, but still requires testing.
Remove a printf, submitted by Chris D. Faulhaber <jedgar@fxp.org>

Upgrade the bktr driver from 2.07 to 2.10.

- The driver now uses bus_space() and runs on NetBSD 1.4.2
Submitted by Thomas Klausner <wiz@danbala.ifoer.tuwien.ac.at>

- Remove startup quirks for video and vbi capture for PAL users.
PAL TV users can now run FXTV and Alevt in any order.

- Add support for cable channels >100
Submitted by Scott Presnell <srp@zgi.com>

- New MSP3410/3415 setup code added. This is experimental.
Please set the sysctl hw.bt848.slow_msp_audio to 1 for this.
Submitted by Frank Nobis<fn@radio-do.de>

No need to use DEV_DRIVER_MODULE() since the bktr driver calls make_dev().
Roger: Feel free to change or spam this as you please.

Update to driver release 2.04
Update AverMedia GPIO values
Submitted by: AverMedia

Add support for WinTV Theater Dolby Surround Sound DPL3518A chip
Submitted by: Frank Nobis <fn@radio-do.de>

Make PLL mode the default for Bt878s. You no longer need options BKTR_USE_PLL

Update Australian channel set and add Leadtek Winfast 2000 GPIO
values for audio.

Submitted by: peter

Split the Bt848 driver into seperate files for
audio, tuner, card make, os dependent code and core bt848/i2c code.

Also, rewrite tuner code for FM Radio to make the code cleaner.