Copy stable/9 to releng/9.3 as part of the 9.3-RELEASE cycle.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

MFC: r262746, r262748, r262750, r262752

Move fpusave() wrapper for suspend hander to sys/amd64/amd64/fpu.c.

MFC r244144

Implement an API to allow a hypervisor to save/restore
guest floating point state without having to know the
size of floating-point state.

Unstaticize fpurestore to allow the hypervisor to
save/restore guest state using fpusave/fpurestore
on the allocated FPU state area.

MFC r238598:
On AMD64, provide siginfo.si_code for floating point errors when error
occurs using the SSE math processor. Update comments describing the
handling of the exception status bits in coprocessors control words.

MFC r230426:
Add support for the extended FPU states on amd64, both for native
64bit and 32bit ABIs. As a side-effect, it enables AVX on capable
CPUs.

MFC r230765:
Synchronize the struct sigcontext definitions on x86 with mcontext_t.

MFC r230270:
Add definitions for the FPU extended state header, legacy extended
state and AVX state.

MFC r230269:
Modernize the fpusave structures definitions by using uint*_t types.

Copy head to stable/9 as part of 9.0-RELEASE release cycle.

Approved by: re (implicit)

Remove npxgetregs(), npxsetregs(), fpugetregs() and fpusetregs()
functions, they are unused. Remove 'user' from npxgetuserregs()
etc. names.

For {npx,fpu}{get,set}regs(), always use pcb->pcb_user_save for FPU
context storage. This eliminates the need for ugly copying with
overwrite of the newly added and reserved fields in ucontext on i386
to satisfy alignment requirements for fpusave() and fpurstor().

pc98 version was copied from i386.

Suggested and reviewed by: bde
Tested by: pho (i386 and amd64)
MFC after: 1 week

Introduce the x86 kernel interfaces to allow kernel code to use
FPU/SSE hardware. Caller should provide a save area that is chained
into the stack of the areas; pcb save_area for usermode FPU state is
on top. The pcb now contains a pointer to the current FPU saved area,
used during FPUDNA handling and context switches. There is also a
facility to allow the kernel thread to use pcb save_area.

Change the dreaded warnings "npxdna in kernel mode!" into the panics
when FPU usage is not registered.

KPI discussed with: fabient
Tested by: pho, fabient
Hardware provided by: Sentex Communications
MFC after: 1 month

A few cleanups to the FPU code on amd64:
- fpudna() always returned 1 since amd64 CPUs always have FPUs. Change
the function to return void and adjust the calling code in trap() to
assume the return 1 case is the only case.
- Remove fpu_cleanstate_ready as it is always true when it is tested.
Also, only initialize fpu_cleanstate when fpuinit() is called on the BSP.

Reviewed by: bde

Use a different value for the initial control word for the FPU state for
32-bit processes. The value matches the initial setting used by
FreeBSD/i386. Otherwise, 32-bit binaries using floating point would use
a slightly different initial state when run on FreeBSD/amd64.

MFC after: 1 week

Remove advertising clause from University of California Regent's license,
per letter dated July 22, 1999.

Approved by: core

We can simplify a lot of things now that we don't have to worry about
hardware bugs on external 386 cpus and now that we can depend on SSE.

Switch from having a fpu "device" to something that is more like the
integrated part of the cpu core that it is.

The great s/npx/fpu/gi

Go back to 64 bit precision for fadd/fsub/fsqrt etc. This is because on
AMD64, gcc (and the ABI) expects the x87 unit to be running in 80/64
mode (not 64/53) so that it can use it for 'long double' operations. It
takes the expected precision differences into account when generating
code.

Include the MXCSR initial values, based on the AMD docs. This file
should really be renamed to fpu.h and npx.c to fpu.c since its part of
the core architecture on amd64 systems, not an isa 'numeric processor
extension'.

Commit MD parts of a loosely functional AMD64 port. This is based on
a heavily stripped down FreeBSD/i386 (brutally stripped down actually) to
attempt to get a stable base to start from. There is a lot missing still.
Worth noting:
- The kernel runs at 1GB in order to cheat with the pmap code. pmap uses
a variation of the PAE code in order to avoid having to worry about 4
levels of page tables yet.
- It boots in 64 bit "long mode" with a tiny trampoline embedded in the
i386 loader. This simplifies locore.s greatly.
- There are still quite a few fragments of i386-specific code that have
not been translated yet, and some that I cheated and wrote dumb C
versions of (bcopy etc).
- It has both int 0x80 for syscalls (but using registers for argument
passing, as is native on the amd64 ABI), and the 'syscall' instruction
for syscalls. int 0x80 preserves all registers, 'syscall' does not.
- I have tried to minimize looking at the NetBSD code, except in a couple
of places (eg: to find which register they use to replace the trashed
%rcx register in the syscall instruction). As a result, there is not a
lot of similarity. I did look at NetBSD a few times while debugging to
get some ideas about what I might have done wrong in my first attempt.

At great personal risk, add a __packed and __aligned(x) define that
expand to __attribute__((packed)) and __attribute__((aligned(x)))
respectively. Replace the handful of gcc-ism's that use
__attribute__((aligned(16))) etc around the kernel with __aligned(16).

There are over 400 __attribute__((packed)) to deal with, that can come
later. I just want to use __packed in new code rather than add more
gcc-ism's.

Add kernel support needed for the KSE-aware libpthread:
- Maintain fpu state across signals.
- Save and restore FPU state properly in ucontext_t's.

Reviewed by: deischen, julian
Approved by: -arch

Remove __P.

KSE Milestone 2
Note ALL MODULES MUST BE RECOMPILED
make the kernel aware that there are smaller units of scheduling than the
process. (but only allow one thread per process at this time).
This is functionally equivalent to teh previousl -current except
that there is a thread associated with each process.

Sorry john! (your next MFC will be a doosie!)

Reviewed by: peter@freebsd.org, dillon@freebsd.org

X-MFC after: ha ha ha ha

style(9) the structure definitions.

Activate SSE/SIMD. This is the extra context switching support that
we are required to do if we let user processes use the extra 128 bit
registers etc.

This is the base part of the diff I got from:
http://www.issei.org/issei/FreeBSD/sse.html
I believe this is by: Mr. SUZUKI Issei <issei@issei.org>
SMP support apparently by: Takekazu KATO <kato@chino.it.okayama-u.ac.jp>
Test code by: NAKAMURA Kazushi <kaz@kobe1995.net>, see
http://kobe1995.net/~kaz/FreeBSD/SSE.en.html

I have fixed a couple of style(9) deviations. I have some followup
commits to fix a couple of non-style things.

Convert npx interrupts into traps instead of vice versa. This is much
simpler for npx exceptions that start as traps (no assembly required...)
and works better for npx exceptions that start as interrupts (there is
no longer a problem for nested interrupts).

Submitted by: original (pre-SMPng) version by luoqi

Declare or #define per-cpu globals in <machine/globals.h> in all cases.
The i386 UP case was messily different.

Change the default FPU control word so that exceptions for new
processes are now masked until set by fpsetmask(3).

Submitted by: bde
Approved by: jkh, bde

Change #ifdef KERNEL to #ifdef _KERNEL in the public headers. "KERNEL"
is an application space macro and the applications are supposed to be free
to use it as they please (but cannot). This is consistant with the other
BSD's who made this change quite some time ago. More commits to come.

$Id$ -> $FreeBSD$

Enable vmspace sharing on SMP. Major changes are,
- %fs register is added to trapframe and saved/restored upon kernel entry/exit.
- Per-cpu pages are no longer mapped at the same virtual address.
- Each cpu now has a separate gdt selector table. A new segment selector
is added to point to per-cpu pages, per-cpu global variables are now
accessed through this new selector (%fs). The selectors in gdt table are
rearranged for cache line optimization.
- fask_vfork is now on as default for both UP and SMP.
- Some aio code cleanup.

Reviewed by: Alan Cox <alc@cs.rice.edu>
John Dyson <dyson@iquest.net>
Julian Elischer <julian@whistel.com>
Bruce Evans <bde@zeta.org.au>
David Greenman <dg@root.com>

Removed unused #includes and a stale forward declaration.

Preliminary support for per-cpu data pages.

This eliminates a lot of #ifdef SMP type code. Things like _curproc reside
in a data page that is unique on each cpu, eliminating the expensive macros
like: #define curproc (SMPcurproc[cpunumber()])

There are some unresolved bootstrap and address space sharing issues at
present, but Steve is waiting on this for other work. There is still some
strictly temporary code present that isn't exactly pretty.

This is part of a larger change that has run into some bumps, this part is
standalone so it should be safe. The temporary code goes away when the
full idle cpu support is finished.

Reviewed by: fsmp, dyson

Back out part 1 of the MCFH that changed $Id$ to $FreeBSD$. We are not
ready for it yet.

Make the long-awaited change from $Id$ to $FreeBSD$

This will make a number of things easier in the future, as well as (finally!)
avoiding the Id-smashing problem which has plagued developers for so long.

Boy, I'm glad we're not using sup anymore. This update would have been
insane otherwise.

Added `#include "ioconf.h"' to <machine/conf.h> and cleaned up the
misplaced extern declarations (mostly prototypes of interrupt handlers)
that this exposed. The prototypes should be moved back to the driver
sources when the functions are staticalized.

Added idempotency guards to <machine/conf.h>. "ioconf.h" can't be
included when building LKMs so define a wart in bsd.kmod.mk to help
guard against including it.

Fix benign type mismatches in isa interrupt handlers. Many returned int
instead of void.

Killed some unused stuff inherited from Bill Jolitz. Note that since
this changes the size of the pcb struct, gdb will need to be rebuilt
or debugging won't work correctly.

Reviewed by: Bruce Evans

Replace sv_ex_tw by padding (it is no longer used; the tag word in sv_env
is valid).

Expand comment about bogus padding for emulators.

Update prototpe for npxinit().

Declare all functions exported by the npx driver.

Uniformize idempotency ifdefs.

__386BSD__ -> __FreeBSD__

I know that many of these entries are bogus and need to be revisited,
but let's get the tree working again for now and then do a pass through
looking at all the __FreeBSD__ entries, shall we?

Submitted by: Bruce Evans
Delete the ifdef GPL_EMULATE case here and made the padding work for
both types of emulators so that there is no longer a need to compile
ps and friends new if you are using the GPL math emulator instead the
normal one.

Deleted on ifdef dontdef
Added ifdef for GPL_MATH_EMULATE so we get the extra padding that is needed
in the save87 struct.

Removed all patch kit headers, sccsid and rcsid strings, put $Id$ in, some
minor cleanup. Added $Id$ to files that did not have any version info, etc

This commit was generated by cvs2svn to compensate for changes in r4,
which included commits to RCS files with non-trunk default branches.

Initial import, 0.1 + pk 0.2.4-B1