| #
265729 |
|
09-May-2014 |
ken |
MFC the mpr(4) driver for LSI's 12Gb SAS cards.
This includes r265236, r265237, r265241, r265261, r265386, r265424, and
r265473.
------------------------------------------------------------------------
r265236 | ken | 2014-05-02 14:25:09 -0600 (Fri, 02 May 2014) | 51 lines
Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers.
This is derived from the mps(4) driver, but it supports only the 12Gb
IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108.
Some notes about this driver:
o The 12Gb hardware can do "FastPath" I/O, and that capability is included in
this driver.
o WarpDrive functionality has been removed, since it isn't supported in
the 12Gb driver interface.
o The Scatter/Gather list handling code is significantly different between
the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather
lists.
Thanks to LSI for developing and testing this driver for FreeBSD.
share/man/man4/mpr.4:
mpr(4) man page.
sys/dev/mpr/*:
mpr(4) driver files.
sys/modules/Makefile,
sys/modules/mpr/Makefile:
Add a module Makefile for the mpr(4) driver.
sys/conf/files:
Add the mpr(4) driver.
sys/amd64/conf/GENERIC,
sys/i386/conf/GENERIC,
sys/mips/conf/OCTEON1,
sys/sparc64/conf/GENERIC:
Add the mpr(4) driver to all config files that currently
have the mps(4) driver.
sys/ia64/conf/GENERIC:
Add the mps(4) and mpr(4) drivers to the ia64 GENERIC
config file.
sys/i386/conf/XEN:
Exclude the mpr module from building here.
Submitted by: Steve McConnell <Stephen.McConnell@avagotech.com>
Tested by: Chris Reeves <chrisr@spectralogic.com>
Sponsored by: LSI, Spectra Logic
Relnotes: LSI 12Gb SAS driver mpr(4) added
------------------------------------------------------------------------
------------------------------------------------------------------------
r265237 | ken | 2014-05-02 14:36:20 -0600 (Fri, 02 May 2014) | 8 lines
Add the mpr(4) man page to the man4 Makefile.
This should have been included in r265236.
Submitted by: Steve McConnell <Stephen.McConnell@avagotech.com>
Sponsored by: LSI, Spectra Logic
------------------------------------------------------------------------
------------------------------------------------------------------------
r265241 | brueffer | 2014-05-02 15:14:28 -0600 (Fri, 02 May 2014) | 2 lines
Use our standard SYNOPSIS wording; perform some cleanup while here.
------------------------------------------------------------------------
------------------------------------------------------------------------
r265261 | brueffer | 2014-05-03 05:15:28 -0600 (Sat, 03 May 2014) | 2 lines
Add a missing colon.
------------------------------------------------------------------------
------------------------------------------------------------------------
r265386 | ken | 2014-05-05 13:53:03 -0600 (Mon, 05 May 2014) | 15 lines
Adjust #if statements inside mprsas_send_smpcmd() to more accurately
reflect when unmapped I/O support was added.
For FreeBSD 10, it arrived just prior to __FreeBSD_version 1000028.
For FreeBSD 9, it arrived just prior to __FreeBSD_version 902001.
Also, fix compiler warnings in mprsas_send_smpcmd() that happen in the
i386 PAE build for non-unmapped I/O builds. These were fixed in mps(4)
in revision 241145, but didn't make it into the mpr(4) driver. This
change should only affect FreeBSD versions outside the above revisions,
and thus doesn't affect head.
Sponsored by: Spectra Logic Corporation
------------------------------------------------------------------------
------------------------------------------------------------------------
r265424 | ken | 2014-05-06 00:18:43 -0600 (Tue, 06 May 2014) | 33 lines
Fix a problem with async notifications in the mpr(4) driver.
This problem only occurs on versions of FreeBSD prior to the recent CAM
locking changes. (i.e. stable/9 and older versions of stable/10) This
change should be a no-op for head and stable/10.
If a path isn't specified, xpt_register_async() will create a fully
wildcarded path and acquire a lock (the XPT lock in older versions,
and via xpt_path_lock() in newer versions) to call xpt_action() for the
XPT_SASYNC_CB CCB. It will then drop the lock and if the requested event
includes AC_FOUND_DEVICE or AC_PATH_REGISTERED, it will get the caller up
to date with any device arrivals or path registrations.
The issue is that before the locking changes, each SIM lock would get
acquired in turn during the EDT tree traversal process. If a path is
specified for xpt_register_async(), it won't acquire and drop its own lock,
but instead expects the caller to hold its own SIM lock. That works for
the first part of xpt_register_async(), but causes a recursive lock
acquisition once the EDT traversal happens and it comes to the SIM in
question. And it isn't possible to call xpt_action() without holding a SIM
lock.
The locking changes fix this by using the XPT topology lock for EDT
traversal, so it is no longer an issue to hold the SIM lock while calling
xpt_register_async().
The solution for FreeBSD versions before the locking changes is to request
notification of all device arrivals (so we pass a NULL path into
xpt_register_async()) and then filter out the arrivals that are not ours.
Sponsored by: Spectra Logic Corporation
------------------------------------------------------------------------
------------------------------------------------------------------------
r265473 | ken | 2014-05-06 16:13:38 -0600 (Tue, 06 May 2014) | 7 lines
Change the device name for mpr(4) from /dev/mpr_N to /dev/mprN.
This is more consistent with the existing mps(4) behavior.
Reviewed by: Steve McConnell <stephen.mcconnell@avagotech.com>
------------------------------------------------------------------------
Submitted by: Steve McConnell <Stephen.McConnell@avagotech.com>
Tested by: Chris Reeves <chrisr@spectralogic.com>
Sponsored by: LSI, Spectra Logic
Relnotes: LSI 12Gb SAS driver mpr(4) added
|
| #
265236 |
|
02-May-2014 |
ken |
Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers.
This is derived from the mps(4) driver, but it supports only the 12Gb
IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108.
Some notes about this driver:
o The 12Gb hardware can do "FastPath" I/O, and that capability is included in
this driver.
o WarpDrive functionality has been removed, since it isn't supported in
the 12Gb driver interface.
o The Scatter/Gather list handling code is significantly different between
the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather
lists.
Thanks to LSI for developing and testing this driver for FreeBSD.
share/man/man4/mpr.4:
mpr(4) man page.
sys/dev/mpr/*:
mpr(4) driver files.
sys/modules/Makefile,
sys/modules/mpr/Makefile:
Add a module Makefile for the mpr(4) driver.
sys/conf/files:
Add the mpr(4) driver.
sys/amd64/conf/GENERIC,
sys/i386/conf/GENERIC,
sys/mips/conf/OCTEON1,
sys/sparc64/conf/GENERIC:
Add the mpr(4) driver to all config files that currently
have the mps(4) driver.
sys/ia64/conf/GENERIC:
Add the mps(4) and mpr(4) drivers to the ia64 GENERIC
config file.
sys/i386/conf/XEN:
Exclude the mpr module from building here.
Submitted by: Steve McConnell <Stephen.McConnell@lsi.com>
MFC after: 3 days
Tested by: Chris Reeves <chrisr@spectralogic.com>
Sponsored by: LSI, Spectra Logic
Relnotes: LSI 12Gb SAS driver mpr(4) added
|